from SiFive, Inc.
The first core on this SoC (hart 0) is a 64-bit microcontroller.
o Pick a hart to run boot process using hart lottery.
This allows to exclude hart 0 from running the boot process.
(BBL releases hart 0 after the main harts, so it never wins the lottery).
o Renumber CPUs early on boot.
Exclude non-MMU cores. Store the original hart ID in struct pcpu. This
allows to find out the correct destination for IPIs and remote sfence
calls.
Thanks to SiFive, Inc for the board provided.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20225
If bumping over the counter goes over the limit we have to decrement it back.
Previous code would only bump the counter after adding the entry (thus allowing
the cache to go over the limit).
Sponsored by: The FreeBSD Foundation
This gets rid of the global cpu_ipi_pending array.
While replace cmpset with fcmpset in the delivery code and opportunistically
check if given IPI is already pending.
Sponsored by: The FreeBSD Foundation
- __predict_false reseeding on entry as it is almost never true.
- don't blindly atomic_cmpset as on x86 it ends up dirtying the cacheline.
it almost ever succeeds per above
- fetch the timestamp prior to getting the cpu number
Reviewed by: cem
Approved by: secteam (delphij)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20242
Factor code into two functions.
read_exportfile() a functon which reads the exports file(s) and calls
get_exportlist_one() to process each of them.
delete_export() a function which deletes the exports in the kernel for a file
system.
The contents of these functions is just the same code as was used to do the
operations, moved into separate functions. As such, there is no semantic change.
This is being done in preparation for a future commit that will add an
option to do incremental changes of kernel exports upon receiving SIGHUP.
MFC after: 1 month
the allocation request, so that the blocks allocated are from the next
set of free blocks big enough to satisfy the minimum requirements of
the request, and the number of blocks allocated are as many as
possible, up to the specified maximum. The implementation of
swp_pager_getswapspace uses this parameter to ask for a number of
blocks between the new halved request size and the previous failed
request size. Thus a request for 32 blocks may fail, but instead of
getting only 16 blocks instead, the caller asks for 16 to 31 next, and
might get 19 or 27, which is closer to what they originally wanted.
I expect this to lead to bigger block allocations and less block
fragmentation, at least in some cases.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20001
The rewrite of strcmp in assembly uses an instruction added in PowerISA
2.05, making it SIGILL on CPUs older than the POWER6, such as the PPC970 in
the PowerMac G5. Revert this until we get clang+lld, or retire the in-tree
binutils in favor of newer binutils with IFUNC support, whichever comes
first.
Instead of precalculating the different speed, respect the bus frequency
and calculate the clock register parameter based on it.
If the platform didn't register the core clk, fallback on the precomputed
values (This is likely do be the case on Marvell boards).
As per https://datacenter.iers.org/data/latestVersion/16_BULLETIN_C16.txt:
INTERNATIONAL EARTH ROTATION AND REFERENCE SYSTEMS SERVICE (IERS)
SERVICE INTERNATIONAL DE LA ROTATION TERRESTRE ET DES SYSTEMES DE REFERENCE
SERVICE DE LA ROTATION TERRESTRE DE L'IERS
OBSERVATOIRE DE PARIS
61, Av. de l'Observatoire 75014 PARIS (France)
Tel. : +33 1 40 51 23 35
e-mail : services.iers@obspm.frhttp://hpiers.obspm.fr/eop-pc
Paris, 07 January 2019
Bulletin C 57
To authorities responsible
for the measurement and
distribution of time
INFORMATION ON UTC - TAI
NO leap second will be introduced at the end of June 2019.
The difference between Coordinated Universal Time UTC and the
International Atomic Time TAI is :
from 2017 January 1, 0h UTC, until further notice : UTC-TAI = -37 s
Leap seconds can be introduced in UTC at the end of the months of December
or June, depending on the evolution of UT1-TAI. Bulletin C is mailed every
six months, either to announce a time step in UTC, or to confirm that there
will be no time step at the next possible date.
Christian BIZOUARD
Director
Earth Orientation Center of IERS
Observatoire de Paris, France
Requested by: rgrimes
Obtained from: ftp://tycho.usno.navy.mil/pub/ntp/leap-seconds.3757622400
MFC after: 3 days
requested, or none, and in the latter case it is up to them to pick a
smaller request to make - which they always do by halving the failed
request. This change to swp_pager_getswapspace leaves the task of
downsizing the request to the function and not its caller. It still
does so by halving the original request.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20228
change the binary search so that it does not depend on a single bit
only being set in the bitmask. Use bitpos more generally, and avoid
some clearing of bits to accommodate its current behavior.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20237
No functional change.
tun_flags of the tuntap_driver was renamed to ident_flags to reflect the
fact that it's a subset of the tun_flags that identifies a tuntap device.
This maps more easily (visually) to the TUN_DRIVER_IDENT_MASK that masks off
the bits of tun_flags that are applicable to tuntap driver ident. This is a
purely cosmetic change.
This patch moves the code that removes and frees all exportlist elements
out into a separate function called free_exports().
It does the same for the insertion of a new exportlist entry into a list.
It also adds a second argument to ex_search() for the list to use.
None of these changes have any semantic effect. They are being done to
prepare the code for future patches that convert the single linked list
for the exportlist to a hash table of lists and a patch that will do
incremental changes of exports in the kernel.
And it fixes the argument for SLIST_HEAD_INITIALIZER() to be a pointer,
which doesn't really matter, since SLIST_HEAD_INITIALIZER() doesn't use
the argument.
MFC after: 1 month
Boot-time netdump configuration is much more useful if one can configure the
client and gateway addresses. Fix trivial typo.
(Long-standing bug, I believe it dates to the original netdump commit.)
Spotted by: one of vangyzen@ or markj@
Sponsored by: Dell EMC Isilon
change the binary search so that it does not depend on a single bit
only being set in the bitmask. Use bitpos more generally, and avoid
some clearing of bits to accommodate its current behavior.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20232
Prior to this revision, struct diocskerneldump_arg (and struct netdump_conf
with embedded diocskerneldump_arg before r347192), were copied in their
entirety to the global 'nd_conf' variable. Also prior to this revision,
de-configuring netdump would *not* remove the the key material from global
nd_conf.
As part of Encrypted Kernel Crash Dumps (EKCD), which was developed
contemporaneously with netdump but happened to land first, the
diocskerneldump_arg structure will contain sensitive key material
(kda_key[]) when encrypted dumps are configured.
Netdump doesn't have any use for the key data -- encryption is handled in
the core dumper code -- so in this revision, we no longer store it.
Unfortunately, I think this leak dates to the initial import of netdump in
r333283; so it's present in FreeBSD 12.0.
Fortunately, the impact *seems* relatively minor. Any new *netdump*
configuration would overwrite the key material; for active encrypted netdump
configurations, the key data stored was just a duplicate of the key material
already in the core dumper code; and no user interface (other than
/dev/kmem) actually exposed the leaked material to userspace.
Reviewed by: markj, rpokala (earlier commit message)
MFC after: 2 weeks
Security: yes (minor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20233
This uses m_dup_pkthdr() to copy all of the metadata about a packet to
each of its fragments including VLAN tags, mbuf tags, etc. instead of
hand-copying a few fields.
Reviewed by: bz
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20117
the same thing, but is commented so that it might be better
understood.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20231
Since we now have a much larger KVA on powerpc64, it's possible to get SLB
traps earlier in boot, possibly even before the HIOR is properly configured
for us. Move the HIOR setup to immediately after reset, so that we use our
exception handlers instead of Open Firmware's.
PR: 233863
Submitted by: Mark Millard (partial)
Reported by: Mark Millard
MFC after: 2 weeks
and the next one, and if blocks are allocated from the next leaf, it
walks back toward where it started, as long as there are interleaving
meta-nodes to be updated on account of the last free blocks under
those meta-nodes being allocated. Only if the walk goes all the way
back to the starting point must we calculate the position of the
meta-node that is the least-comment parent of one leaf and the next,
and update a bit in that meta-node to indicate the allocation of its
last free block.
There's no need to start calculating the position of that least-common
parent until the walk back reaches the original starting point, and
there's no need for a calculation that updates 'radius' to tell us
when we've walked back to the beginning, since comparing scan to next
suffices for that.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20229
Generate the ilinks for all dependency objects not just the ones
in the CLEAN list.
Possibly related to r345351
Reported by: kmoore
MFC after: 2 weeks
X-MFC-with: r345351
Sponsored by: Dell EMC Isilon
We used to put every PLL in normal mode (meaning that the output would
be the result of the PLL configuration) instead of slow mode (the output
is equal to the external oscillator frequency, 24-26Mhz) but this doesn't
work for most of the PLLs as when we put them into normal mode the registers
configuring the output frequency haven't been set.
Add a normal_mode member in clk_pll_def/clk_pll_sc struct and if it's true
we then set the PLL to normal mode.
For now only set it to the LPLL and BPLL (Little cluster PLL and Big cluster
PLL respectively).
Reviewed by: ganbold
Differential Revision: https://reviews.freebsd.org/D20174
We do this for FDT systems but not for ACPI ones.
Check the presence of the _CCA attribute.
Sponsored by: Ampere Computing, LLC
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D20144
Otherwise concurrently running threads may inadvertently use the same
token for different messages.
Preserve the behaviour of disallowing negative message tokens, but allow
a message token value of zero since this simplifies the code a bit and
tokens are documented to be non-negative.
PR: 234442
Reported and tested by: eugen
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Bind the TCP pacer threads to NUMA domains and build per-domain
pacer-thread lookup tables. These tables allow us to use the
inpcb's NUMA domain information to match an inpcb with a pacer
thread on the same domain.
The motivation for this is to keep the TCP connection local to a
NUMA domain as much as possible.
Thanks to jhb for pre-reviewing an earlier version of the patch.
Reviewed by: rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20134
Additionally, providing mappings makes the comparison for already loaded
modules a little more strict. This should have been done at initial
introduction, but there was no real reason- however, it proves necessary for
enc which has a standard enc -> if_enc mapping but there also exists an
'enc' module that's actually CAM. The mapping lets us unambiguously
determine the correct module.
Discussed with: ae
MFC after: 4 days
So do nothing in pmap_page_set_memattr() and don't panic.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20209
