This is the hack that compensates for when bios vendors "forget" to
include the fdc control (0x3f7) port in their io port mappings. Instead
of accessing ports outside of a range allocated to a handle, simply
allocate the port directly. It even shows up in the probe..
machine but leave your KLSI adapter plugged into your USB port, it
may stay powered on and retain its firmware in memory. Trying to load
the firmware again in this case will wedge the chip. Try to detect this
in the kue_load_fw() routine and bail if the firmware is already
loaded and running.
Also, in the probe/match routine, force the revision code to the
hardware default and force a rescan of the quirk database. This is
necessary because the adapter will return a different revision code
if the firmware has been loaded. Without the firmware, the revision
code is 0x002. With the firmware, the revision code is 0x202. This
confuses the quirk mechanism, which won't match a quirk to a device
unless the revision code agrees with the quirk table entry.
This makes probe/attach of these devices somewhat more reliable.
Also add a few comments about the device's operation.
In particular:
- Don't leave resources allocated in the probe routine. Allocate them
during probe and release them. Probe's job is to identify devices only.
- Don't abuse the ivars pointer.. (!). Create real ivars and use the
proper access system. (the bus_read_ivar method)
- Don't add the children until attach() has successfully grabbed the
hardware, otherwise there are potential leaks if attach fails.
breaking a cross-build caused by taking the X libraries on the
build machine. In general this means that we never compile with
X support. The user has to manually compile doscmd for that.
Suggested by: bde, imp (among others)
on alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
struct sd: Add a field for the pid of the reviver when the subdisk is
reviving.
Replace block device macros with generalized device macros.
alpha.
Explicitly type large scalar parameters to avoid compilation warnings
on alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
Make better checks that the revive block size is valid, silently set
it to the defaults if not.
Replace block device macros with generalized device macros.
alpha.
Modify the manner in which we lock RAID-5 plexes. This appears to
solve some of the elusive panics we have seen with corrupted buffer
headers (specifically the zeroed-out b_iodone field).
Submitted-by: Bernd Walter <ticso@cicely.de>
solve some of the elusive panics we have seen with corrupted buffer
headers (specifically the zeroed-out b_iodone field).
Submitted-by: Bernd Walter <ticso@cicely.de>
'iswhite'. The original change was required because of name
conflicts.
Add key pairs for the keywords 'mv' and 'move' (part of the move
command).
Add comments.
drives. This function just does the low-level configuration changes;
the resultant subdisk is stale if it previously had any contents,
otherwise it is empty (i.e. in need of initializing if it's RAID-5).
We still need to handle getting the contents moved over, but the
current version will suffice to migrate subdisks from a disk which has
failed.
Submitted-by: Marius Bendiksen <marius@marius.scancall.no>
on alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
Remove #include of vm/vm_zone.h.
Submitted-by: Someone, I'm sure, but I seem to have lost the
attribution. Sorry.
Get the check for disk devices correct, and return an appropriate
message if the check fails.
shutdown.
Submitted-by: Alfred Perlstein <bright@wintelcom.net>
Correct printf format for pointers to avoid compilation warnings on
alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
Identify daemon as 'vinum', not 'vinumd', in messages. This
corresponds to the name in ps.
on alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
Get parameters right for some error messages returned via
throw_rude_remark().
Fix typo in comment.
Remove the 'static' attribute from give_sd_to_drive. This is needed
for the implementation of moveobject() in vinumioctl.c.
Suggested-by: Bernd Walter (ticso@cicely.de)
Add key pairs for 'mv' and 'move' (a synonym for 'mv'). Required for
the move command code submitted by Marius Bendiksen
<marius@marius.scancall.no>
make_devices: Don't create symlinks for drives if they are only
referenced. Previously, spurious symlinks appeared in the current
directory.
Problem-reported-by: Bernd Walter (ticso@cicely.de)
No longer create character devices, now that there is no difference.
Make the devices as character devices, not block devices.
on alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
Replace %q formats with %lld.
Desired-by: bde
Remove #ifdef RAID5
vinum_lsi: If a subdisk is in 'reviving' state, check the status of
the revive and report the status of the revive. In verbose mode,
display the pid of the reviver.
on alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
Add function vinum_mv, which moves subdisks to different drives. This
function just does the low-level configuration changes; the resultant
subdisk is stale if it previously had any contents, otherwise it is
empty (i.e. in need of initializing if it's RAID-5). We still need to
handle getting the contents moved over, but the current version will
suffice to migrate subdisks from a disk which has failed.
Submitted-by: Marius Bendiksen <marius@marius.scancall.no>
vinum_start: Get the revive block size right.
into vnode dirtyblkhd we append it to the list instead of prepend it to
the list in order to maintain a 'forward' locality of reference, which
is arguably better then 'reverse'. The original algorithm did things this
way to but at a huge time cost.
Enhance the append interlock for NFS writes to handle intr/soft mounts
better.
Fix the hysteresis for NFS async daemon I/O requests to reduce the
number of unnecessary context switches.
Modify handling of NFS mount options. Any given user option that is
too high now defaults to the kernel maximum for that option rather then
the kernel default for that option.
Reviewed by: Alfred Perlstein <bright@wintelcom.net>
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).
Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.
Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
was calling nfs_flush() and then clearing the NMODIFIED bit. This is
not legal since there might still be dirty buffers after the nfs_flush
(for example, pending commits). The clearing of this bit in turn prevented
a necessary vinvalbuf() from occuring leaving left over dirty buffers
even after truncating the file in a new operation. The fix is to
simply not clear NMODIFIED.
Also added a sysctl vfs.nfs.nfsv3_commit_on_close which, if set to 1,
will cause close() to do a stage 1 write AND a stage 2 commit
synchronously. By default only the stage 1 write is done synchronously.
Reviewed by: Alfred Perlstein <bright@wintelcom.net>
