This is a GPLv2 PHY-N implementation based on the Linux b43 driver,
ported over to work in bwn(4).
I've tested this on the BCM4321 11abgn device, in 11bg and 11a modes.
The b43 PHY code only supports 11abg, no 11n, and 20MHz only wide
channels.
Yes, this is a GPLv2 driver, so it won't be included in the
default builds.
Tested:
* BCM4321 11abgn device (Apple!), 11bg and 11a STA mode.
Obtained from: Linux b43
This is an import of the reworked LEDE dts files. Besides other things
they make it easier for us to reuse.
The only diffs left are for the following SoCs:
MT7620A (fbsd-mt7620a.dtsi)
MT7621 (fbsd-mt7621.dtsi)
MT7628 (fbsd-mt7628an.dtsi)
RT3883 (fbsd-rt3883.dtsi)
So we include the fbsd-*.dtsi files at the end of the original LEDE dtsi
files, using '#include "fbsd-xxxx.dtsi"'.
For example, for MT7621, the LEDE dtsi file is mt7621.dtsi. At the end of
it we add:
#include "fbsd-mt7621.dtsi"
Approved by: adrian (mentor)
Obtained from: LEDE project
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6394
Change '#include <fbsd-*>' to '/include/ "fbsd-*"' in [rm]t*.dtsi
Basically the pre-import work on OpenWRT's dts/dtsi files boils down to:
for f in `ls [mr]t*.dtsi`; do
printf '\n/include/ "fbsd-$f"\n' >> $f
done
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5993
Import original OpenWRT dts files after executing the following script
on them:
for f in `ls [mr]t*.dtsi`; do
printf "\n#include <fbsd-$f>\n" >> $f
done
Approved by: adrian (mentor)
Obtained from: OpenWRT
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5971
address, bad IRQ, etc) which are fixed by this patch.
John has sent these changes to the author of the files who said
he'll propagate the changes further upstream.
Submitted by: John Wehle
Reviewed by: imp
don't actually use these files at the moment, so eliminate them until
we actually do. In the mean time, freebsd-update will be updated
to eliminate the issues.
Requested by: cperciva
from the git tree. This merges a lot that we're not using, but there's
too many files to be selective and have a hope of catching everything.
If there are conflicts with the rest of the tree, we'll resolve them
on a case by case basis.
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
full vendor tree. This worked great until it was time to update, but
now it is time to update. Hit the rest button by removing this branch
and re-adding it by a full copy of whatever is in the vendor tree.
received granular locking) but the comment present in UFS has been
copied all over other filesystems code incorrectly for several times.
Removes comments that makes no sense now.
Reviewed by: kib
MFC after: 3 days
instruction loads/stores at its will.
The macro __compiler_membar() is currently supported for both gcc and
clang, but kernel compilation will fail otherwise.
Reviewed by: bde, kib
Discussed with: dim, theraven
MFC after: 2 weeks
warnings in sys/gnu/fs/xfs. The only warnings that still need to be
suppressed are those about array bound overruns of flexible array
members in xfs_dir2_{block,sf}.c, which are too expensive (in terms of
cascading code changes) to fix.
MFC after: 1 week
X-MFC-With: r239959
should be paried with g_vfs_close(). Though g_vfs_close() is a wrapper
around g_wither_geom_close(), r206130 added the following test in
g_vfs_open():
if (bo->bo_private != vp)
return (EBUSY);
Which will cause a 'Device busy' error inside reiserfs_mountfs() if
the same file system is re-mounted again after umount or mounting failure:
(case 1, /dev/ad4s3 is not a valid REISERFS partition)
# mount -t reiserfs -o ro /dev/ad4s3 /mnt
mount: /dev/ad4s3: Invalid argument
# mount -t msdosfs -o ro /dev/ad4s3 /mnt
mount: /dev/ad4s3: Device busy
(case 2, /dev/ad4s3 is a valid REISERFS partition)
# mount -t reiserfs -o ro /dev/ad4s3 /mnt
# umount /mnt
# mount -t reiserfs -o ro /dev/ad4s3 /mnt
mount: /dev/ad4s3: Device busy
On the other hand, g_vfs_close() 'fixed' the above cases by doing an
extra step to keep 'sc->sc_bo->bo_private' and 'cp->private' pointers
synchronised.
Reviewed by: kib
MFC after: 1 month
The cs driver requires a table with firmware values. An
alternative firmware is available in a similar Open Sound
System driver. This is actually a partial revert of
Revision 77504.
Special thanks to joel@ for patiently testing several
replacement attempts.
The csa driver and the complete sound system are now free
of the GPL.
Tested by: joel
Approved by: jhb (mentor)
MFC after: 3 weeks
versions derived from /usr/ports/audio/oss.
The particular headers used were taken from the
attic/drv/oss_allegro directory and are mostly identical
to the previous files.
The Maestro3 driver is now free from the GPL.
NOTE: due to lack of testers this driver is being
considered for deprecation and removal.
PR: kern/153920
Approved by: jhb (mentor)
MFC after: 2 weeks
This uses the emuxkireg.h already used in the emu10k1
snd driver. Special thanks go to Alexander Motin as
he was able to find some errors and reverse engineer
some wrong values in the emuxkireg header.
The emu10kx driver is now free from the GPL.
PR: 153901
Tested by: mav, joel
Approved by: jhb (mentor)
MFC after: 2 weeks
It seems strchr() and strrchr() are used more often than index() and
rindex(). Therefore, simply migrate all kernel code to use it.
For the XFS code, remove an empty line to make the code identical to
the code in the Linux kernel.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
