Ext2fs uses unsigned fields in its dinode struct.
FreeBSD can have negative values in some of those
fields and the inode is meant to interact with the
system so we have never respected the unsigned
nature of most of those fields.
Block numbers and the NFS generation number do
not need to be signed so redefine them as
unsigned to better match the on-disk information.
MFC after: 1 week
Add a missing 0 to the mask for byte0 of C_SIZE.
The previous mask (0xc) worked except that the last 0-1536K of the disk
could not be accessed since we were shifting the (wrong) bits we did
mask off the right edge.
Testing with fsx has revealed problems and in order to
hunt the bugs properly we need reduce the complexity.
This seems to help but is not a complete solution.
MFC after: 3 days
SVN r245536 ported this to Python 3. The major change was the use of the
print function. Unfortunately this is incompatible with Python 2, which
is still the default version in the ports tree.
Use a __future__ import to make this compatible with Python 2.6 and later.
be used on the host system (and not installed on the device, if required). The
GPL'd one is still available if there are any devices that need it (make
universe passes with it, including kernels that use fdt, but there may be some
out-of-tree ones). WITH_GPL_DTC can be used to select the old one, for now.
Probably won't be MFC'd, but we'll remove the GPL'd version in head after the
new one has had a lot more testing and ship it in 10.0.
type. GEOM provider names can't duplicate (or shouldn't -- devfs will either
break or only use the first one if they do) so using the first provider
by that name is a sufficient check. This also lets the scripted partitioner
install onto gmirror and geli and such things.
logic (refer to [1] for associated discussion). snd_cwnd and snd_wnd are
unsigned long and on 64 bit hosts, min() will truncate them to 32 bits and could
therefore potentially corrupt the result (although under normal operation,
neither variable should legitmately exceed 32 bits).
[1] http://lists.freebsd.org/pipermail/freebsd-net/2013-January/034297.html
Submitted by: jhb
MFC after: 1 week
generating binary diffs.
- Constify a few strings used in the driver.
- Style changes to make the driver compile with default clang settings.
Approved by: HighPoint Technologies
MFC after: 3 days
gcc handles -symbolic by passing -Bsymbolic through to ld. clang ignores
-symbolic and thus invokes ld without -Bsymbolic which leads to some symbols
not being properly linked in loader.efi. Fix this by using -Wl,-Bsymbolic which
passes -Bsymbolic to ld in both the gcc and clang cases.
Approved by: rpaulo
- If update method is SUP_UPDATE or CVS, warn that those
update methods are deprecated.
- While here, remove bogus NO_WWWUPDATE.
MFC after: 3 days
X-MFC-with: r245756
allow it to be updated by its owner without resorting to privilege.
This is required by upcoming changes to allow installworld to work as
a non-root user.
Sponsored by: DARPA, AFRL
Reviewed by: ian, ray, rpaulo
statically. In most cases the number of table entries will be far less than
the maximum of 2048 allowed by the PCI specification.
Reuse macros from pcireg.h to interpret the MSI-X capability instead of rolling
our own.
Obtained from: NetApp
an exception when you haven't caught one. This is largely a cosmetic fix, as
(unless you have a very unusual terminate handler installed) it will print a
nice error and then abort, rather than just aborting.
MFC after: 7 days
This is easily possible now that the TX is protected by a single
lock, rather than a per-TXQ (and thus per-TID) lock.
Only set CLRDMASK if none of the destinations are filtered.
This likely will need some tuning when it comes time to do UASPD/PS-POLL
TX, however at that point it should be manually set anyway.
Tested:
* AR9280, STA mode
TODO:
* More thorough testing in AP mode
* test other chipsets, just to be safe/sure.
This allows a remote session to be specified with '-r' as well as a
non-default baudrate setting using '-b'.
TODO: add to the kgdb manpage.
MFC after: 2 weeks
that 'smp_started != 0'.
This is required because the VT-x initialization calls smp_rendezvous()
to set the CR4_VMXE bit on all the cpus.
With this change we can preload vmm.ko from the loader.
Reported by: alfred@, sbruno@
Obtained from: NetApp
