module. The only module accessing it (the current line number) was the
condition module, so pass the current line number as a function argument.
Centralize the pushing of new input sources into one function
ParsePushInput() and rename the function handling the popping from ParseEOF()
to ParsePopInput(). Make the entire thing a little bit clearer, by holding
the current input source in the top element of the stack instead of
using extra variables for this. Use a type-safe intrusive list for the
input stack.
characters so it is not safe to move around code from
before it to after it. This should fix problems with building the
documentation.
Patch: 7.170
Submitted by: Max Okumoto <okumoto@ucsd.edu>
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
carp_carpdev_state_locked() is called every time carp interface is attached.
The first call backs up flags of the first interface, and the second
call backs up them again, erasing correct values.
To solve this, a carp_sc_state_locked() function is introduced. It is
called when interface is attached to parent, instead of calling
carp_carpdev_state_locked. carp_carpdev_state_locked() calls
carp_sc_state_locked() for each sc in chain.
Reported by: Yuriy N. Shkandybin, sem
are initialised to zero. When freeing TLS, don't attempt to free DTV
slots which were not used.
Pointed out by: Joerg Sonnenberger
X-MFC-After: After the branch, probably
queues lock in vm_object_backing_scan(). Updates to the page's PG_BUSY
flag and busy field are synchronized by the containing object's lock.
Testing the page's hold_count and wire_count in vm_object_backing_scan()'s
OBSC_COLLAPSE_NOWAIT case is unnecessary. There is no reason why the held
or wired pages cannot be migrated to the shadow object.
Reviewed by: tegge
filesystem modules must be recompiled. (Since struct vnode has
already changed in 6-CURRENT, there's little advantage to leaving
the unused fields around.)
vnodes whose names it caches, so we no longer need a `generation
number' to tell us if a referenced vnode is invalid. Replace the use
of the parent's v_id in the hash function with the address of the
parent vnode.
Tested by: Peter Holm
Glanced at by: jeff, phk
except for places where people forget to update one of them. We now
collect only one set of stats for both of these routines. Other
changes in this commit include:
- Start acquiring Giant again in vn_fullpath(), since it is required
when crossing a mount point.
- Expand the scope of the cache lock to avoid dropping it and
picking it up again for every pathname component. This also
makes it trivial to avoid races in stats collection.
- Assert that nc_dvp == v_dd for directories instead of returning
an error to userland when this is not true. AFAIK, it should
always be true when v_dd is non-null.
- For vn_fullpath(), handle the first (non-directory) vnode
separately.
Glanced at by: jeff, phk
returns error. In this case mbuf has already been freed. [1]
- Remove redundant declaration.
PR: kern/78893 [1]
Submitted by: Liang Yi [1]
Reviewed by: sam
MFC after: 1 day
to cache_lookup(). This allows us to acquire the vnode interlock before
dropping the cache lock. This protects the vnodes identity until we
have locked it.
Sponsored by: Isilon Systems, Inc.
sha512, I did not do that since it is not entirely clear where "the one
true place" to hold their implementations is going to be. Sha256 is
different since mtree already links against libmd.
Make recommended procedure for integrity checking in the manpage
consistent.
Fix a bug with -f spec1 -f spec2 comparison, which prevented
test/tes03.sh from running successfully.
Reviewed by: phk, cperciva
We don't need a mknod(2) call
No tricky install documentation
Kernel leave them dev_t alone
Hey Kernel leave them cdevsw alone
All in all it's just another struct in src/sys
All in all you're just another struct in src/sys
Don't remove the now unused element from cdev yet, wait until
we have a better reason to bump the version.
There is now no longer any upper limit on how many device drivers
a FreeBSD kernel can have.
only allow proper values. ENTROPYSOURCE is a maxval+1, not an
allowable number.
Suggested loose protons in the solution: phk
Prefers to keep the pH close to seven: markm
acquire shared locks on intermediate directories.
- For the LASTCN, we may have to LK_UPGRADE the parent directory before
we lookup the last component.
- Acquire VFS_ROOT and dp locks based on the cn_lkflag.
Sponsored by: Isilon Systems, Inc.
vhold()s us.
- Avoid an extra mutex acquire and release in the common case of vgonel()
by checking for OWEINACT at the start of the function.
- Fix the case where we set OWEINACT in vput(). LK_EXCLUPGRADE drops our
shared lock if it fails.
Sponsored by: Isilon Systems, Inc.
