dt_popc() function assumes that either _ILP32 or _LP64 is defined,
otherwise it has no suitable implementation.
However, the _ILP32 and _LP64 macros come from isa_defs.h, which is not
included in this file. Add the include now, to get the macros defined.
MFC after: 1 week
This code only runs on i386 and amd64, so there should be no problems if
buf + sec->dofs_offset is not aligned (which is unlikely anyway).
MFC after: 1 week
- if pw is NULL and oldpw is not NULL then the oldpw is deleted
- if pw->pw_name != oldpw->pw_name but pw->pw_uid == oldpw->pw_uid
then it renames the user
add new gr_* functions so now gr_util API is similar to pw_util API,
this allow to manipulate groups in a safe way.
Reviewed by: des
Approved by: des
MFC after: 1 month
with FreeBSD easier for vendors.
- For optional files use variables starting with underscore.
Both changes make rc.d/Makefile look similar to sys/modules/Makefile.
Reviewed by: dim
yet (see LLVM PR 9788), and warns about it, rub it out for now. When
clang grows support for this attribute, I will revert this again.
MFC after: 1 week
The feature has been standard for a while in UFS as a means to reduce
fragmentation, therefore maintaining consistent performance with
filesystem aging. This is also very similar to what ext4 calls
"delayed allocation".
In his 2010 GSoC, Zheng Liu ported and benchmarked the missing
FANCY_REALLOC code to find more consistent performance improvements than
with the preallocation approach.
PR: 159233
Author: Zheng Liu <gnehzuil AT SPAMFREE gmail DOT com>
Sponsored by: Google Inc.
Approved by: jhb (mentor)
MFC after: 2 weeks
conversion between enum desdir/desmode from include/rpc/des.h, and enum
desdir/desmode from include/rpcsvc/crypt.x. These are actually
different enums, with different value names, but by accident the integer
representation of the enum values happened to be the same.
MFC after: 1 week
warn about it. I guess this was originally done to silence a bogus
warning by an older version of gcc, but I could not reproduce it with
any version of gcc that I have access to.
MFC after: 1 week
versions of pthread_md.h have a special case of dereferencing a null
pointer. Clang warns about this with:
In file included from lib/libthr/arch/i386/i386/pthread_md.c:36:
lib/libthr/arch/i386/include/pthread_md.h:96:10: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference]
return (TCB_GET32(tcb_self));
^~~~~~~~~~~~~~~~~~~
lib/libthr/arch/i386/include/pthread_md.h:73:13: note: expanded from:
: "m" (*(u_int *)(__tcb_offset(name)))); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/libthr/arch/i386/include/pthread_md.h:96:10: note: consider using __builtin_trap() or qualifying pointer with 'volatile'
Since this indirection is done relative to the fs or gs segment, to
retrieve thread-specific data, it is an exception to the rule.
Therefore, add a volatile qualifier to tell the compiler we really want
to dereference a zero address.
MFC after: 1 week
Since mpboot.s enables processor support for PG_PS before enabling
paging, there is no reason that the identity must use 4 KB page mappings.
Discussed with: jhb
- Write Buffers have to be drained after write to Page Table even if caches
are in write-through mode.
- Make sure to sync PTE in pmap_zero_page_generic().
Submitted by: Michal Mazur
Reviewed by: cognet
Obtained from: Semihalf
MFC after: 1 month
(see tools/regression/usr.bin/make/execution/joberr test).
openpty(fd + 0, fd + 1,...) version does not have this problem but
it sometimes enters an infinite sleep in "ttywait" state in tty_drain()
when make(1) closes slave pty.
the full length from offset is being flushed. Note that for now VOP_FSYNC
does not support offset and length parameters so we still do the same full
VOP_FSYNC. This issue was reported at FreeNAS support site as FreeNAS
ticket #1096.
Submitted by: "ceckerle" <ce.freenas eckerle net>
Prodded by: gcooper
Reviewed by: rmacklem
MFC after: 2 weeks
* Add in a default GPIO section for AR91XX_BASE.hints, which doesn't
define the GPIO function masks or any GPIO pines.
* Add in the GPIO line definitions for LEDs and GPIO pins for the
TP-WR1043nd.
I've verified the LEDs work fine using gpioset.
config and function mask setup.
* "gpiomask" now specifies which GPIO pins to enable, for devices to bind to.
* "function_set" allows bits in the function register to be set at GPIO setup.
* "function_clear" allows bits in the function register to be cleared at
GPIO setup.
The function_set/function_clear bits allow for individual GPIO pins to either
drive a GPIO line or an alternate function - eg USB, JTAG, etc. This allows
for things like CS1/CS2 be enabled for those boards w/ >1 SPI device connected,
or disabling JTAG for the AR7240 (which is apparently needed ..)
I've verified this on the AR71xx.
attached this way.
The AR5212 based NICs have a variety of RF frontends, so there's a linker set
which the AR5212 attach routine calls. The same framework is used for the
AR5416 and later but as there's a fixed RF frontend for each 11n NIC, it
is just directly attached.
However in the case of compiling a cut down HAL (eg _just_ AR9130 WMAC support),
the linker set ends up being empty and this causes the compile to fail.
So this is just a workaround for that - it means those users who wish an 11n
only HAL can compile the 11n chipsets and RF frontend they need, and just
"ath_ar5212" for the AR5212/AR5416 common code, and it'll just work.
Sponsored by: Hobnob, Inc.
* Call it before sending probe responses, so the ACL code has the
chance to reject sending them.
* Pass the whole frame to the ACL code now, rather than just the
destination MAC - that way the ACL module can look at the frame
contents to determine what the response should be.
This is part of some uncommitted work to support band steering.
Sponsored by: Hobnob, Inc.
The reverse direction of a pipe is lazily allocated on the first write in
that direction (because pipes are usually used in one direction only). A
special case is needed to ensure the pipe appears writable before the first
write because there are 0 bytes of pending data in 0 bytes of buffer space
at that point, leaving 0 bytes of data that can be written with the normal
code.
Note that the first write returns [ENOMEM] if kern.ipc.maxpipekva is
exceeded and does not block or return [EAGAIN], so selecting true for write
is correct even in that case.
PR: kern/93685
Submitted by: gianni
MFC after: 2 weeks
objects created by shm_open(2) into the kernel's address space. This
provides a convenient way for creating shared memory buffers between
userland and the kernel without requiring custom character devices.
This removes the obfuscations mentioned in ext2_readwrite and
places the clustering funtion in a location similar to other
UFS-based implementations.
No performance or functional changeses are expected from
this move.
PR: kern/159232
Suggested by: bde
Approved by: jhb (mentor)
MFC after: 2 weeks
sintrnames and sintrcnt are initialized with non-zero values, which were
discarded by the .bss directive, so consumers like "vmstat -i" were not
getting correct data.
Submitted by: Lukasz Plachno
Obtained from: Semihalf
MFC after: 1 month
from the dispatcher would also acquire bind lock in read mode, which
is the supported operation. plt is explicitely designed to allow safe
multithreaded updates, so the shared lock do not cause problems.
The error in r228435 is that it allows read lock acquisition after the
write lock for the bind block. If we dlopened the shared object that
contains IRELATIVE or jump slot which target is STT_GNU_IFUNC, then
possible recursive plt resolve from the dispatcher would cause it.
Postpone the resolution for irelative/ifunc right before initializers
are called, and drop bind lock around calls to dispatcher. Use
initlist to iterate over the objects instead of the ->next, due to
drop of the bind lock in iteration.
For i386/reloc.c:reloc_iresolve(), fix calculation of the dispatch
function address for dso, by taking into account possible non-zero
relocbase.
MFC after: 3 weeks
