When a transition from link alive to link dead configuration or vice
versa occurs, notify any upstream and / or downstream peers using
NGM_FLOW messagges.
Link state notification using NGM_FLOW messages is modelled around
around already existing code in ng_ether.c.
MFC after: 3 days
virtual ifnets more realistically mimic physical ethernet interfaces.
The main motivation behind this change is to allow for ng_eiface(4)
interfaces to participate in STP if_bridge(4) configurations.
When announcing link status changes, switch to the vnet to which the
ifnet belongs, since it is possible for ng_eiface ifnets to be assigned
to a vnet different from the one in which its netgraph node resides.
MFC after: 3 days
the topology mutex in the following functions, that manipulate pointers
to peer nodes:
- ng_bypass()
- ng_path2noderef() when switching to the next node in sequence.
Rewrite the function a bit.
- ng_address_hook()
- ng_address_path()
This patch improves stability of large mpd5 installations.
VNET socket push back:
try to minimize the number of places where we have to switch vnets
and narrow down the time we stay switched. Add assertions to the
socket code to catch possibly unset vnets as seen in r204147.
While this reduces the number of vnet recursion in some places like
NFS, POSIX local sockets and some netgraph, .. recursions are
impossible to fix.
The current expectations are documented at the beginning of
uipc_socket.c along with the other information there.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
Tested by: zec
Tested by: Mikolaj Golub (to.my.trociny gmail.com)
MFC after: 2 weeks
to provide serialization of calls into the node, which is accomplished
by markng the node as single-threaded (NGF_FORCE_WRITER).
The price we pay is that each ng_pipe instance now has its own callout
handler which polls for queued frames on each clock tick, as long as
the pipe has any frames in its internal queues. OTOH, we got rid of
the global ng_pipe mutex, so from now on multiple ng_pipe instances
can operate in parallel. This change also fixes counting of forwarded
frames when an ng_pipe node is not enforcing any packet impairments.
While here, attempt to improve adherance to style(9) throughout
otherwise mostly unreadable code.
MFC after: 3 days
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
configured on ng_eiface ifnets. The default MTU remains unchanged at
1500 bytes.
Mark ng_eiface ifnets as IFCAP_VLAN_MTU capable, so that the associated
vlan(4) ifnets may use full-sized Ethernet MTUs (1500 bytes).
MFC after: 3 days
passing through. Modifications are restricted to a subset of C language
operations on unsigned integers of 8, 16, 32 or 64 bit size.
These are: set to new value (=), addition (+=), subtraction (-=),
multiplication (*=), division (/=), negation (= -), bitwise AND (&=),
bitwise OR (|=), bitwise eXclusive OR (^=), shift left (<<=),
shift right (>>=). Several operations are all applied to a packet
sequentially in order they were specified by user.
Submitted by: Maxim Ignatenko <gelraen.ua at gmail.com>
Vadim Goncharov <vadimnuclight at tpu.ru>
Discussed with: net@
Approved by: mav (mentor)
MFC after: 1 month
socket while it is still in use.
priv->ctlsock is checked at the top of the function but without any
lock held, which means the control socket state may certainly change.
Add a similar protection to ngs_shutdown() even if a race is unlikely
to be experienced there.
Sponsored by: Sandvine Incorporated
Obtained from: Nima Misaghian @ Sandvine Incorporated
<nmisaghian at sandvine dot com>
MFC after: 10 days
from 2000 bytes to 20 Kbytes, which now matches the buffer size used for
NGM_BINARY2ASCII conversions.
The aim of this change is to allow for bigger binary structures to be
managed via netgraph ASCII messages, until we come up with an API
improvement which would get rid of such arbitrary hardcoded limits.
MFC after: 3 days
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.
MFC after: 1 month
starting from netgraph import in 1999.
netstat(8) used pointer to node as node address, oops. That didn't
work, we need the node ID in brackets to successfully address a node.
We can't look into ng_node, due to inability to include netgraph/netgraph.h
in userland code. So let the node make a hint for a userland, storing
the node ID in its private data.
MFC after: 2 weeks
address on an interface has changed. This lets stacked interfaces such as
vlan(4) detect that their lower interface has changed and adjust things in
order to keep working. Previously this situation broke at least vlan(4) and
lagg(4) configurations.
The EVENTHANDLER_INVOKE call was not placed within if_setlladdr() due to the
risk of a loop.
PR: kern/142927
Submitted by: Nikolay Denev
- use a uniform mtag format for all packets that exit and re-enter
the firewall in the middle of a rulechain. On reentry, all tags
containing reinject info are renamed to MTAG_IPFW_RULE so the
processing is simpler.
- make ipfw and dummynet use ip_len and ip_off in network format
everywhere. Conversion is done only once instead of tracking
the format in every place.
- use a macro FREE_PKT to dispose of mbufs. This eases portability.
On passing i also removed a few typos, staticise or localise variables,
remove useless declarations and other minor things.
Overall the code shrinks a bit and is hopefully more readable.
I have tested functionality for all but ng_ipfw and if_bridge/if_ethersubr.
For ng_ipfw i am actually waiting for feedback from glebius@ because
we might have some small changes to make.
For if_bridge and if_ethersubr feedback would be welcome
(there are still some redundant parts in these two modules that
I would like to remove, but first i need to check functionality).
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
MFC after: 1 month
r201011
- move most of ng_ipfw.h into ip_fw_private.h, as this code is
ipfw-specific. This removes a dependency on ng_ipfw.h from some files.
- move many equivalent definitions of direction (IN, OUT) for
reinjected packets into ip_fw_private.h
- document the structure of the packet tags used for dummynet
and netgraph;
r201049
- merge some common code to attach/detach hooks into
a single function.
r201055
- remove some duplicated code in ip_fw_pfil. The input
and output processing uses almost exactly the same code so
there is no need to use two separate hooks.
ip_fw_pfil.o goes from 2096 to 1382 bytes of .text
r201057 (see the svn log for full details)
- macros to make the conversion of ip_len and ip_off
between host and network format more explicit
r201113 (the remaining parts)
- readability fixes -- put braces around some large for() blocks,
localize variables so the compiler does not think they are uninitialized,
do not insist on precise allocation size if we have more than we need.
r201119
- when doing a lookup, keys must be in big endian format because
this is what the radix code expects (this fixes a bug in the
recently-introduced 'lookup' option)
No ABI changes in this commit.
MFC after: 1 week
and remove all O(N) sequences from kernel critical sections in ipfw.
In detail:
1. introduce a IPFW_UH_LOCK to arbitrate requests from
the upper half of the kernel. Some things, such as 'ipfw show',
can be done holding this lock in read mode, whereas insert and
delete require IPFW_UH_WLOCK.
2. introduce a mapping structure to keep rules together. This replaces
the 'next' chain currently used in ipfw rules. At the moment
the map is a simple array (sorted by rule number and then rule_id),
so we can find a rule quickly instead of having to scan the list.
This reduces many expensive lookups from O(N) to O(log N).
3. when an expensive operation (such as insert or delete) is done
by userland, we grab IPFW_UH_WLOCK, create a new copy of the map
without blocking the bottom half of the kernel, then acquire
IPFW_WLOCK and quickly update pointers to the map and related info.
After dropping IPFW_LOCK we can then continue the cleanup protected
by IPFW_UH_LOCK. So userland still costs O(N) but the kernel side
is only blocked for O(1).
4. do not pass pointers to rules through dummynet, netgraph, divert etc,
but rather pass a <slot, chain_id, rulenum, rule_id> tuple.
We validate the slot index (in the array of #2) with chain_id,
and if successful do a O(1) dereference; otherwise, we can find
the rule in O(log N) through <rulenum, rule_id>
All the above does not change the userland/kernel ABI, though there
are some disgusting casts between pointers and uint32_t
Operation costs now are as follows:
Function Old Now Planned
-------------------------------------------------------------------
+ skipto X, non cached O(N) O(log N)
+ skipto X, cached O(1) O(1)
XXX dynamic rule lookup O(1) O(log N) O(1)
+ skipto tablearg O(N) O(1)
+ reinject, non cached O(N) O(log N)
+ reinject, cached O(1) O(1)
+ kernel blocked during setsockopt() O(N) O(1)
-------------------------------------------------------------------
The only (very small) regression is on dynamic rule lookup and this will
be fixed in a day or two, without changing the userland/kernel ABI
Supported by: Valeria Paoli
MFC after: 1 month
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.
Sitting aroung in tree waiting to commit for: 2 months
MFC after: 2 months
several critical bugs, including race conditions and lock order issues:
Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
sxlock. Either can be held to stablize the lists and indexes, but both
are required to write. This allows the list to be held stable in both
network interrupt contexts and sleepable user threads across sleeping
memory allocations or device driver interactions. As before, writes to
the interface list must occur from sleepable contexts.
Reviewed by: bz, julian
MFC after: 3 days
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
network stacks, VNET_SYSINIT:
- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
occur each time a network stack is instantiated and destroyed. In the
!VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
For the VIMAGE case, we instead use SYSINIT's to track their order and
properties on registration, using them for each vnet when created/
destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
previously, as well as its dependency scheme: we now just use the
SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
they want init functions to be called for each virtual network stack
rather than just once at boot, compiling down to DOMAIN_SET() in the
non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
of modinfo or DOMAIN_SET() for init/uninit events. In some cases,
convert modular components from using modevent to using sysinit (where
appropriate). In some cases, do minor rejuggling of SYSINIT ordering
to make room for or better manage events.
Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup)
Discussed with: jhb, bz, julian, zec
Reviewed by: bz
Approved by: re (VIMAGE blanket)
unused custom mutex/condvar-based sleep locks with two locks: an
rwlock (for non-sleeping use) and sxlock (for sleeping use). Either
acquired for read is sufficient to stabilize the vnet list, but both
must be acquired for write to modify the list.
Replace previous no-op read locking macros, used in various places
in the stack, with actual locking to prevent race conditions. Callers
must declare when they may perform unbounded sleeps or not when
selecting how to lock.
Refactor vnet sysinits so that the vnet list and locks are initialized
before kernel modules are linked, as the kernel linker will use them
for modules loaded by the boot loader.
Update various consumers of these KPIs based on whether they may sleep
or not.
Reviewed by: bz
Approved by: re (kib)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
Introduce the new flag KNF_NOKQLOCK to allow event callers to be called
without KQ_LOCK mtx held.
- Modify VFS knote calls to always use KNF_NOKQLOCK flag. This is required
for ZFS as its getattr implementation may sleep.
Approved by: re (rwatson)
Reviewed by: kib
MFC after: 2 weeks
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.
For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.
Approved by: re (kib)
MFC after: 6 weeks
network stack when reentering the inbound path from netgraph, and
force queueing of mbufs at the outbound netgraph node.
The mechanism relies on two components. First, in netgraph nodes
where outbound path of the network stack calls into netgraph, the
current thread has to be appropriately marked using the new
NG_OUTBOUND_THREAD_REF() macro before proceeding to call further
into the netgraph topology, and unmarked using the
NG_OUTBOUND_THREAD_UNREF() macro before returning to the caller.
Second, netgraph nodes which can potentially reenter the network
stack in the inbound path have to mark their inbound hooks using
NG_HOOK_SET_TO_INBOUND() macro. The netgraph framework will then
detect when there is a danger of a call graph looping back from
outbound to inbound path via netgraph, and defer handing off the
mbufs to the "inbound" node to a worker thread with a clean stack.
In this first pass only the most obvious netgraph nodes have been
updated to ensure no outbound to inbound calls can occur. Nodes
such as ng_ipfw, ng_gif etc. should be further examined whether a
potential for outbound to inbound call looping exists.
This commit changes the layout of struct thread, but due to
__FreeBSD_version number shortage a version bump has been omitted
at this time, nevertheless kernel and modules have to be rebuilt.
Reviewed by: julian, rwatson, bz
Approved by: julian (mentor)
If packet leaves ipfw to other kernel subsystem (dummynet, netgraph, etc)
it carries pointer to matching ipfw rule. If this packet then reinjected back
to ipfw, ruleset processing starts from that rule. If rule was deleted
meanwhile, due to existed race condition panic was possible (as well as
other odd effects like parsing rules in 'reap list').
P.S. this commit changes ABI so userland ipfw related binaries should be
recompiled.
MFC after: 1 month
Tested by: Mikolaj Golub
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state. The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.
While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers. Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.
Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels. Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.
Bump __FreeBSD_version to 800097.
Reviewed by: bz, julian
Approved by: rwatson, kib (re), julian (mentor)
- Each socket upcall is now invoked with the appropriate socket buffer
locked. It is not permissible to call soisconnected() with this lock
held; however, so socket upcalls now return an integer value. The two
possible values are SU_OK and SU_ISCONNECTED. If an upcall returns
SU_ISCONNECTED, then the soisconnected() will be invoked on the
socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls. The
API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
the receive socket buffer automatically. Note that a SO_SND upcall
should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
instead of calling soisconnected() directly. They also no longer need
to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
state machine, but other accept filters no longer have any explicit
knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
while invoking soreceive() as a temporary band-aid. The plan for
the future is to add a new flag to allow soreceive() to be called with
the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
buffer locked. Previously sowakeup() would drop the socket buffer
lock only to call aio_swake() which immediately re-acquired the socket
buffer lock for the duration of the function call.
Discussed with: rwatson, rmacklem
previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.
This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.
The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.
The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.
This change also introduces a DDB subcommand to show the list of all
vnet instances.
Approved by: julian (mentor)
initialize / release netgraph related state in iattach() / idetach()
functions called via the vnet module registration / initialization
framework, instead of initialization / cleanups being done in
mod_event handlers.
While here, introduce a crude hack aimed at preventing ng_ether to
autoattach to ng_eiface ifnets, which are also netgraph nodes already.
Reviewed by: bz
Approved by: julian (mentor)
Clang disallows structs with variable length arrays to be nested inside
other structs, because this is in violation with ISO C99. Even though we
can keep bugging the LLVM folks about this issue, we'd better just fix
our code to not do this. This code seems to be the only code in the
entire source tree that does this.
I haven't tested this patch by using the kernel modules in question, but
Diane Bruce and I have compared disassembled versions of these kernel
modules. We would have expected them to be exactly the same, but due to
randomness in the register allocator and reordering of instructions,
there were some minor differences.
Approved by: julian
When copying big structures, LLVM generates calls to memmove(), because
it may not be able to figure out whether structures overlap. This caused
linker errors to occur. memmove() is now implemented using bcopy().
Ideally it would be the other way around, but that can be solved in the
future. On ARM we don't do add anything, because it already has
memmove().
Discussed on: arch@
Reviewed by: rdivacky
net/route.h.
Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.
We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.
This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
Remove ng_rmnode_flags() function.
ng_rmnode_self() was made to be called only while having node locked.
When node is properly locked, any function call sent to it will always be
queued. So turning ng_rmnode_self() into the ng_rmnode_flags() is not just
meaningless, but incorrent, as it violates node locking when called outside.
No objections: julian, thompsa
container structures, depending on VIMAGE_GLOBALS compile time option.
Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out. Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.
Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively
#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif
Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.
Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs. This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.
Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.
De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps. PF virtualization will be done
separately, most probably after next PF import.
Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw. Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
underneath #ifdef VIMAGE blocks.
This change introduces some churn in #include ordering and nesting
throughout the network stack and drivers but is not expected to cause
any additional issues.
In the next step this will allow us to instantiate the virtualization
container structures and switch from using global variables to their
"containerized" counterparts.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
Use mbuf tagging for accounted packets to not account packets twice when
both ingress and egress netflow enabled.
To keep compatibility new "setconfig" message added to control new
functionality. By default node works as before, doing only ingress
accounting without using mbuf tags.
Reviewed by: glebius
This changes from a line discipline to the tty_hooks mechanism. Data will come
in directly via rint_bypass and sent to the peer node in a single mbuf.
As line disciplines are no longer used a new netgraph command called
NGM_TTY_SET_TTY is used to attach the tty. This takes a pointer to to the open
file descriptor of the tty and registers the tty hooks. When the tty disappears
the node will shutdown.
Thanks to: ed
Sponsored by: Hobnob, Inc
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit
Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.
Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().
Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).
All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).
(*) netipsec/keysock.c did not validate depending on compile time options.
Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.
This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.
Reviewed by: kib
When I changed kern_conf.c three months ago I made device unit numbers
equal to (unneeded) device minor numbers. We used to require
bitshifting, because there were eight bits in the middle that were
reserved for a device major number. Not very long after I turned
dev2unit(), minor(), unit2minor() and minor2unit() into macro's.
The unit2minor() and minor2unit() macro's were no-ops.
We'd better not remove these four macro's from the kernel, because there
is a lot of (external) code that may still depend on them. For now it's
harmless to remove all invocations of unit2minor() and minor2unit().
Reviewed by: kib
ng_apply_item(). There are possible (and I have got one) use-after-free
class panics because of it.
If hook is specified, require it to be valid at the apply time. The only
exceptions are the internal ng_con_part2(), ng_con_part3() and
ng_rmhook_part2() functions which are specially made to work with invalid
hooks.
