previous seek location was 0. Without this, readdir() would see
dd_loc of zero and call getdirentries() which would start reading
entries at the current seek location of the directory ignoring the
first batch of entries. Also, rewinddir() should always seek so that
it reads the directory from the beginning to get updated entries.
PR: 192935
Reported by: iron@mail.ua
MFC after: 3 days
Use of "find ." resulted in METALOG entries with an extra ./ -- e.g.,
./usr/share/zoneinfo/./America/Toronto. Avoid this by using globbing
via "find *" instead.
Reviewed by: brooks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D719
- miibus fixes as suggested by Yonghyeon Pyun.
- enable VLAN MTU support.
- fix a few WITNESS complaints in cgem_attach().
- have cgem_attach() properly init the ifnet struct before calling
mii_attach() to fix panic when using e1000phy.
- fix ethernet address changing.
- fix transmit queue overflow handling.
- tweak receive queue handling to reduce receive overflows.
- bring out MAC statistic counters to sysctls.
- add e1000phy to config file.
- implement receive hang work-around described in reference guide.
- change device name from if_cgem to cgem to be consistent with other
interfaces.
Submitted by: Thomas Skibo <ThomasSkibo@sbcglobal.net>
Reviewed by: wkoszek, Yonghyeon PYUN <pyunyh@gmail.com>
CPUs in a system. The tool queries the kernel for its set of CPUs
and compares TSC values on each of the additional CPUs to the first
CPU in turn. It then outputs a table of simple statistics.
Reverts 271025 but still functionally patches it. Original intent is still
the same. Pointed out by rdivacky.
MFV: Only emit movw on ARMv6T2
Building for the FreeBSD default target ARMv6 was emitting movw ASM on certain
test cases (found building qmake4/5 for ARM). Don't do that, moreover, the AS
in base doesn't understand this instruction for this target. One would need
to use --integrated-as to get this to build if desired.
http://llvm.org/viewvc/llvm-project?view=revision&revision=216989
Submitted by: ian
Reviewed by: dim
Obtained from: llvm.org
MFC after: 2 days
Relnotes: yes
Building for the FreeBSD default target ARMv6 was emitting movw ASM on certain
test cases (found building qmake4/5 for ARM). Don't do that, moreover, the AS
in base doesn't understand this instruction for this target. One would need
to use --integrated-as to get this to build if desired.
http://llvm.org/viewvc/llvm-project?view=revision&revision=216989
Submitted by: ian
Reviewed by: dim
Obtained from: llvm.org
MFC after: 2 days
on "ifconfig -v". I've seen no measurable timing difference
for doing additional SIOCGI2C call for system with 4k vlans.
* Determine appropriate handler (SFP/QSFP) by reading identification
byte (which is the same for both SFF-8472 and SFF-8436) instead
of checking driver name.
MFC with: r270064
Sponsored by: Yandex LLC
As GCC also gained support for the C11 keywords over time, we can patch
up <sys/cdefs.h> to not define these anymore. This has the advantage
that error messages for static assertions are printed natively and that
_Alignas() will work with even a type outside of C11 mode.
All C11 keywords are supported with GCC 4.7 and higher, with the
exception of _Thread_local and _Generic. These are only supported as of
GCC 4.9.
reaches 1. The p_numthreads counter is decremented in thread_exit() by
a call to thread_unlink(). This means that the exiting threads may
still execute on other CPUs when thread_single(SINGLE_EXIT) returns.
As result, vmspace could be destroyed while paging structures are
still used on other CPUs by exiting threads.
Delay the return from thread_single(SINGLE_EXIT) until all threads are
really destroyed by thread_stash() after the last switch out. The
p_exitthreads counter already provides the required mechanism, move
the wait from the thread_wait() (which is called from wait(2) code)
into thread_single().
Reported by: many (as "panic: pmap active <addr>")
Reviewed by: alc, jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In addition to Clang 3.3, it turns out that GCC 4.7 in Ports also does
not support the _Thread_local keyword. Let's document this in a bit more
detail.
Reported by: antoine@
Prior to the change it would always return initproc for non-traced processes.
This fixes ps apparently always returning 1 as ppid.
Pointy hat: mjg
Reported by: many
MFC after: 1 week
friendliness. This should restore old-fashioned kernel building in a
cross environment, though this has only had limited testing.
Sponsored by: Netflix
This allows WITH_DEBUG_FILES to produce standalone debug for the ELF
runtime linker.
We previously disabled standalone debug files for bsd.prog.mk consumers
that included a non-default ${PROG} target, but this is not required.
Consumers that do not support standalone debug are still handled by
disabling it for statically linked binaries, and for those that specify
a non-default binary format.
Sponsored by: DARPA, AFRL
This happen when converting any JBOD to RAID or creating
any new RAID from Unconfigured Drives.
Without this fix, user may see below call trace if WITNESS is enabled.
witness_warn() at witness_warn+0x4b5/frame 0xfffffe011f929a00
uma_zalloc_arg() at uma_zalloc_arg+0x3b/frame 0xfffffe011f929a70
malloc() at malloc+0x192/frame 0xfffffe011f929ac0
mrsas_bus_scan_sim() at mrsas_bus_scan_sim+0x32/frame 0xfffffe011f929af0
mrsas_aen_handler() at mrsas_aen_handler+0x11c/frame 0xfffffe011f929b20
taskqueue_run_locked() at taskqueue_run_locked+0xf0/frame 0xfffffe011f929b80
taskqueue_thread_loop() at taskqueue_thread_loop+0x9b/frame 0xfffffe011f929bb0
fork_exit() at fork_exit+0x84/frame 0xfffffe011f929bf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe011f929bf0
Submitted by: kadesai
Reviewed by: ambrisko
MFC after: 3 days
- Remove c++0x hack from <sys/cdefs.h> that was needed when Clang did
not fully implement C++11. We can now safely test against C++11 to
check whether thread_local is available, like we do for all other
C++11 keywords.
- Don't use __clang__ to test for thread safety annotation presence. It
turns out we have a proper attribute for this.
in the clocks=<...> properties of their FDT data. The clock properties
consist of 2-cell tuples, each containing a clock device node reference and
a clock number. A clock device driver can register itself as providing
this interface, then other drivers can turn the FDT clock node reference
into the corresponding device_t so that they can use the interface to query
and manipulate their clocks.
This provides convenience functions to enable or disable all the clocks
listed in the properties for a device, so most drivers will be able to
manage their clocks with a single call to fdt_clock_enable_all(dev).
used prior to f_dialog_init() -- e.g., in a script that sets
DIALOG_SELF_INITIALIZE to NULL, preventing f_dialog_init() from being run
automaticaly when `dialog.subr' is included. Caused by sub-shell processing
of arguments inheriting prior value of $OPTIND, used by getopts. Solved by
unsetting OPTIND prior to [re-]processing of positional arguments.
xref handle, and for registering that association. Also use the same data
for faster translations between node and xref handles.
Now when fdt properties contain &othernode references, a driver can find
the device instance that corresponds to &othernode, and thus can use
interfaces provided by that instance.
Reviewed by: nwhitehorn
bsearch_b is the Apple blocks enabled version of bsearch(3).
This was added to libc in Revision 264042 but the commit
missed the declaration required to make use of it.
While here move some other block-related functions to the
BSD_VISIBLE block as these are non-standard.
Phabric: D638
Reviewed by: theraven, wollman
While there, add a NO_WTHREAD_SAFETY flag that can be used to disable
this specific warning flag. Disable it for auditdistd. We can easily
patch up auditdistd to have the right annotations to build, but as
auditdistd is intended to be portable across other operating systems,
it's not worth the effort.
Approved by: brueffer@
- Add annotations to the lock/unlock function to indicate that the
function is allowed to lock and unlock the underlying pthread mutex.
- Add __guarded_by() annotations to the global variables.
Approved by: hselasky@
inf and raises the divided-by-zero exception. Compilers
constant fold one/zero to inf but do not raise the exception.
Introduce a volatile vzero to prevent the constant folding.
Move the declaration of zero into the main declaration block.
While here, fix a nearby disordering of 'lx,ix'
Discussed with: bde
