This also makes it so that top-level build targets do not immediately create
the OBJDIR. Only sub-make targets will do so. This avoids creating object
directories for targets like 'make check-old' or creating unneeded
MACHINE.MACHINE_ARCH directories during 'make tinderbox'.
Reported by: npn, lifanov
Tested by: npn, Mark Millard
Sponsored by: Dell
This will allow disabling some things like AUTO_OBJ early if not needed for the
directory/targets, without putting special logic into share/mk/*.sys.mk.
Sponsored by: Dell
The -fuse-ld flag is only meant to be passed to the compiler driver so
direct linker invocations should not include it.
Reviewed by: emaste, jhb
Approved by: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D12910
syslog in libc secretly reconnects to the daemon.
Another issue is that we don't have any information from openlog(3) if we
succeeded to open log or not so we don't know if we are ready
to enter cabability mode.
Because all of that we decided we need a syslog service for Caspser.
Reviewed by: bapt@
Differential Revision: https://reviews.freebsd.org/D12824
DIRDEPS_BUILD works just fine without defining __objdir or dealing with any of
this logic. It handles its own TARGET_SPEC in local.meta.sys.mk as well. Just
let it do its own thing.
Sponsored by: Dell EMC Isilon
Transition to WITH/WITHOUT_LOADER_GELI to flag support or not of GELI
in the boot loaders. Add HAVE_GELI so components can flag they need
support (since it's too large to include everywhere). Add temporary
warnings for the old forms to ease transition.
Also, update test script to build without GELI on x86.
Sponsored by: Netflix
Rename LOADER_FIREWIRE_SUPPORT to MK_LOADER_FIREWIRE. Only build
libfirewire when this is "yes". Add note to updating. Fix build script
to build this for x86 so the option doesn't decay. sparc64 supports
ZFS, so also build it MK_ZFS=no.
Sponsored by: Netflix
This avoids flipping the expected TARGET.TARGET_ARCH suffix / OBJTOP when it is
already set by a parent make which wants to control it more such as in
something like 'make native-xtools'.
Sponsored by: Dell EMC Isilon
- If OBJROOT is SRCTOP then don't add on TARGET.TARGET_ARCH. This
only happens at the top-level, and for sub-directories when the
user is clever with MAKEOBJDIRPREFIX=/.
- Don't bother checking 'test -w' on .CURDIR.
- Properly set OBJTOP/OBJROOT to SRCTOP in various needed cases.
- Check if the OBJDIR is writable even for *clean* targets since it
determines which .OBJDIR the user gets; If they cannot write to an
existing eligible .OBJDIR then it needs to clean in .CURDIR instead.
- Add guard to cleanworld/cleanuniverse from removing SRCTOP.
- Ensure OBJTOP is proper for .OBJDIR=.CURDIR which fixes finding
libraries since src.libnames.mk is based on OBJTOP.
- Avoid some chdir(2) for modifying .OBJDIR
Sponsored by: Dell EMC Isilon
This avoids the obvious of not running the target when expected, but
also avoids META_MODE from showing 'Building'. This is mostly only
a problem when directly including bsd.obj.mk as many of these targets
were already .PHONY via bsd.sys.mk.
Sponsored by: Dell EMC Isilon
The problem with it was a bogus .OBJDIR in some cases where creation of
object directories were purposely not attempted, such as for 'make cleandir'
and in etc/ sub-directories. In these cases bmake would start with a
bogus .OBJDIR like etc/ due to MAKEOBJDIR being a dynamic value based on
.CURDIR, SRCTOP, and OBJTOP. OBJTOP would not yet be defined but is
during early src.sys.obj.mk. That file and auto.obj.mk both were not
modifying .OBJDIR unless they expected to create the objdir. Thus in
these cases the .OBJDIR was left as etc/* rather than fixed to the
proper .CURDIR.
The issues were fixed in r325404 and r325416. An assertion to avoid the
bad .OBJDIR was added in r325405.
Sponsored by: Dell EMC Isilon
Despite the fact that it's a working solution, it doesn't follow the design
philosophy of only doing TARGET_* in Makefile.inc1 and special locations in
the source tree.
PR: 222925
Requested by: imp
- Define TARGET_CPUARCH and use in libclang_rt as the basis for CRTARCH
When cross-compiling, the wrong architecture was being embedded in the
libclang_rt binary filenames. It should be based on TARGET_ARCH (target), not
MACHINE_ARCH (host).
If TARGET_ARCH isn't defined (host-builds), fallback to MACHINE_ARCH.
- Define CRTARCH to armhf when TARGET/TARGET_ARCH are set to arm/armv[67]
TARGET_ABI/TARGET_CPU in Makefile.inc1 sets the ABI to gnueabihf, which
affects the clang lookup path per `getArchNameForCompilerRTLib(..)` in
contrib/llvm/tools/clang/lib/Driver/ToolChain.cpp, so chase clang and
Linux's assumed naming convention for hard-float arm architectures.
CROSSENV (in Makefile.inc1) sets CPUTYPE/MACHINE(_ARCH)? to the
TARGET*-relevant values when building the `libraries` target, so test
those variables instead.
- Add OLD_FILES/OLD_LIBS entries for TARGET/TARGET_ARCH == arm/armv[67]. This
impacts only arm/armv6 and arm/armv7.
PR: 222925
Apparently they have SRCTOP set, but won't have RELDIR set since they are
not in-tree.
Pointyhat to: bdrewery
Reported by: O. Hartmann <ohartmann@walstatt.org>, dhw
Tested by: dhw
Sponsored by: Dell EMC Isilon
The cleanobj target will not really remove the OBJDIR in this case,
it will only remove the OBJDIR if only clean targets are ran.
Sponsored by: Dell EMC Isilon
When AUTO_OBJ is enabled this change becomes redundant with the auto.obj.mk
check added in r325404. However, it is possible that new code is added
at some point between src.sys.obj.mk and auto.obj.mk that disables AUTO_OBJ.
That could leave make with a bogus and unsafe .OBJDIR in some cases.
Sponsored by: Dell EMC Isilon
auto.obj.mk is loaded before the Makefile which may have NO_OBJ set inside of
it. In that case we can't avoid creating the OBJDIR but we do need to avoid
using it. Fixing .OBJDIR in bsd.init.mk at least fixes all of the build .mk
files to have a proper .OBJDIR. It does not fix the Makefile itself but
usually if they have NO_OBJ set they are not inspecting ${.OBJDIR} anyhow.
It is ideal to only have this in bsd.init.mk and to remove it from bsd.obj.mk,
but then bsd.obj.mk would need to include bsd.init.mk. Doing something like
that would require more testing. It has been proposed that bsd.obj.mk not be
included directly but it has been possible for too long to do so to change it
at this point.
Note too that it may make sense to fix .OBJDIR even when AUTO_OBJ is not
enabled but the historical behavior has always been that NO_OBJ just avoids
running 'make obj', so .OBJDIR should already be .CURDIR.
Also while NO_OBJ seems like it should be removed at this point, it is not
always possible to fix Makefiles to properly use an .OBJDIR. The cost of
keeping NO_OBJ support is minimal.
Sponsored by: Dell EMC Isilon
Forcing MK_AUTO_OBJ to no is not really needed since bsd.obj.mk is protected
against 'rm -rf ${.CURDIR}' already. It was also flawed as if MK_AUTO_OBJ=yes
was in the .MAKEOVERRIDES already then it just remained on.
Sponsored by: Dell EMC Isilon
If for any reason we cannot set .OBJDIR==_objdir as desired
use .CURDIR so that at least the classic
.if ${.OBJDIR} != ${.CURDIR}
works and dangerous misstakes can be avoided.
Reviewed by: bdrewery
This is to prevent downstream checks from assuming they can trust .OBJDIR when
MK_AUTO_OBJ is yes, such as the bsd.obj.mk checks.
Pointyhat to: bdrewery
Sponsored by: Dell EMC Isilon
This will force any existing objects to rebuild if their .meta
files reference files from WORLDTMP. This is a problem after
the UNIFIED_OBJDIR effort caused buildworld and DIRDEPS_BUILD
to share an OBJDIR. Without cleaning these files the
Makefile.depend files end up with odd tmp/legacy/... entries
since some bootstrap-tools linger from there and otherwise
don't rebuild. Removing the files causes anything having
used WORLDTMP to rebuild.
Sponsored by: Dell EMC Isilon
This can be disabled by putting WITHOUT_AUTO_OBJ=yes in /etc/src-env.conf, not
/etc/src.conf, or passing it in the environment.
The purpose of this rather than simply flipping the default of AUTO_OBJ to yes
is to avoid hassling users with auto.obj.mk failures if the wanted OBJDIR is
not writable. It will fallback to writing to the source directory like it does
today if MAKEOBJDIRPREFIX is not writable.
The act of enabling MK_AUTO_OBJ disables all 'make obj' treewalks since
previous work has made those not run if MK_AUTO_OBJ==yes in Makefile.inc1.
Relnotes: yes
Reviewed by: sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12841
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
RELSRCTOP is likely not as useful since make will always be running from
inside of .OBJDIR and using something like ${.CURDIR}/${RELSRCTOP} is
not redundant for ${SRCTOP}.
Sponsored by: Dell EMC Isilon
This fixes object files landing in the source tree in gnu/usr.bin/dtc
for GCC platforms.
We cannot reliably detect if an external compiler is used here, and the
default YES option does include GCC_BOOTSTRAP which implies that GCC may
be used for the build.
The problem manifests when not using an external compiler, and the host
compiler is clang. When a fresh build is done (no OBJDIR yet) the
'make obj' treewalk is done before 'make cross-tools', so
COMPILER_FEATURES at this point contains 'c++11' since the host compiler
was used for COMPILER_FEATURES. Once cross-tools builds the GCC
bootstrap compiler and then descends into 'make everything',
COMPILER_FEATURES no longer contains 'c++11' and MK_GPL_DTC defaults to
enabled. Now it builds in gnu/usr.bin/dtc without an OBJDIR preset and
drops files into the source tree.
The COMPILER_FEATURES check here is useful for knowing if we can *bootstrap*
C++11 things. Indeed we do bootstrap dtc as a build tool so it is
useful for enabling the BSD dtc for the build, but we end up needing the
GPL dtc for installation anyway.
Reviewed by: manu, emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12817
library -- libpmcstat.
This includes PMC logging module, symbols lookup functions,
ELF parsing, process management, PMC attachment, etc.
This allows to reuse code while building new hwpmc(4)-based applications.
Also add pmcstat_symbol_search_by_name() function that allows to find
mapped IP range for a given function name.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12718
This option implies that it will automatically prefix .gcda files, when
created, thus allowing for the desired prefixing I've added in via bsd.cov.mk .
This option is only available in clang and later versions of gcc, so I'll
likely have to mark MK_COVERAGE broken from a "fully-fledged feature"
perspective, as I don't want to go through the annoyance of implementing the
feature in gcc and testing it.
This is particularly fun when relative paths are embedded in SRCS, like
lib/libclang_rt does (which I argue is ripe for corruption via parallel
builds).
The cross-toolchain gcc toolchains aren't installing libgcov.a, but the host
toolchain variants are. Don't hack around broken packages in the base system.
PR: 223174
When cross-compiling, the wrong architecture was being embedded in the
libclang_rt binary filenames. It should be based on TARGET_ARCH (target), not
MACHINE_ARCH (host).
This is a draft commit against my project branch. Will fix on ^/head soon.
PR: 222925
Add GCNOS{GRP,MODE,OWN} for parity with FILES{GRP,MODE,OWN}. The defaults are
based on BIN{GRP,MODE,OWN}.
GCNOSDIRMODE is added, strictly for configurability, if need be.
Try to install them instead of the .gcda's, since the .gcda's likely won't exist.
TODO: verify that installworld does indeed do the right thing.
Ref: gcc(1) -ftest-coverage description; --coverage (option in use) is an alias
for -fprofile-arcs -ftest-coverage
Now that OBJS has grown an OBJS_SRCS_FILTER variable, use this variable
in the computation of BCOBJS and LLOBJS too. Also move BCOBJS and LLOBJS
computation to be next to the OBJS computation: this should both make
the parallel structure clearer and serve to remind people changing OBJS
that parallel changes are required in BCOBJS and LLOBJS.
A side effect of this change is that BCOBJS and LLOBJS will be available
even when LLVM_LINK has not been defined, but that seems like a positive
change: there's no reason we can't ask "what bitcode files would you
generate" just because we can't link those files together into a
complete bitcode representation of a binary or library.
Reviewed by: sjg
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12701
The build rule describing how to create ${PROG_FULL}.{bc,ll} is only
dependent on LLVM_LINK being defined, not on MK_DEBUG_FILES being "yes".
Move the addition of ${PROG_FULL}.{bc,ll} out of the conditional block
under `.if ${MK_DEBUG_FILES} != "no"` and up next to where the build
rules for ${PROG_FULL}.{bc,ll} are defined.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12703
We previously taught the build system how to create files like libfoo.bc,
but neglected to teach it about cleaning such files up. Rectify this now.
MFC after: 1 week
Sponsored by: DARPA, AFRL
This is being done for reasons parallel to MK_TESTS_SUPPORT's addition in
^/head@r273449
Unlike ^/head@r273449 though, we do want binaries to be built with coverage
support in the libraries phase, but not in the cross-tools phase.
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
The logic wasn't using a filtered version of SRCS -- it was using the
unfiltered version. This was causing some hilarity with unnecessary
dependencies, like headers and the like in lib/libc/... .
Also use .pico with bsd.lib.mk, not .o -- .o doesn't use SHARED_C*FLAGS,
which doesn't contain _COV_FLAG, which means that the .gcda's would have
relied on objects that didn't build them as a side-effect.
Add flag to the makefile to allow loader compilation as
Little-Endian 32-bit executable.
Usage:
make WITH_LOADER_FORCE_LE=yes -C sys/boot all
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: imp, nwhitehorn
Obtained from: Semihalf
Sponsored by: QCM Technologies
Differential revision: https://reviews.freebsd.org/D12421
Use a separate variable (PIC_OBJS) for the objects that should be in a
pic-enabled static library.
This unbreaks libexec/rtld-elf compilation when MK_COVERAGE == no.
.gcda files should be installed, not .gcno files. It's easier to
formulate which .gcda's to install based on the SRCS and their
extension in bsd.{lib,prog}.mk .
Some makefiles do reachover builds.
In some cases it is convenient to list subdirs of the distribution
in SRCS.
It is not very convenient, or always even desirable to have corresponding
subdirs in .OBJDIR, so OBJS_SRCS_FILTER allows the makefile to choose.
The default value 'R' matches existing practice.
But a makefile can set OBJS_SRCS_FILTER= T (the R gets added by
bsd.init.mk) to avoid the need for subdirs in .OBJDIR
Differential Revision: https://reviews.freebsd.org/D12218
Reviewed by: bdrewery
Start the phasing out of TRE by disabling it by default. r317254 introduced
a BSD_GREP_FASTMATCH knob (defaulting to on) for testing of bsdgrep with and
without TRE enabled. More bugs have cropped up since then, and
WITHOUT_BSD_GREP_FASTMATCH has shown in testing to be more stable than its
counterpart.
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12381
This effectively reverts r304877, after having relegated the warning
suppression to the zic(8) makefile in r323572.
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
X-Differential Revision: https://reviews.freebsd.org/D12284
The -S flag is currently ignored for builds since we filter through
tools/install.sh that is intended for both non-root and cross-builds.
Sponsored by: Dell EMC Isilon
X-MFC-With: r322565
- Include debug symbols in static libraries. This permits binaries
to include debug symbols for functions obtained from static libraries.
- Permit the C/C++ compiler flags added for MK_DEBUG_FILES to be
overridden by setting DEBUG_FILES_CFLAGS. Use this to limit the debug
information for llvm libraries and binaries.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12025
Pass through appropriate objects via COV_OBJS in bsd.lib.mk (based on
SOBJS), and appropriate objects via bsd.prog.mk (OBJS).
While here, do more intelligent things in terms of iterating over COV_OBJS,
building lists of items to install with the GCNOS variable/adding GCNOS to
FILESGROUPS, etc. This reduces the 2 unrolled .for loops into 1.
libraries).
- Fix typo (${PROGNAME}.full should be ${PROG_FULL} -- this fixes installing
usr.sbin/xinstall).
- Pass through appropriate sentinel for determining whether or not the program
should be compiled with debug symbols, and hence whether or not --coverage
should be enabled.
In order to support coverage binaries and non-coverage binaries with libraries,
separate libraries need to be created which don't have coverage symbols (and
dependent symbols on libc) in them. libc_pic.a for instance will not link with
binaries if it's compiled with --coverage.
This allows buildworld to complete, minus rtld-elf -- it's a special snowflake
that needs to be resolved with a solution that I don't yet possess.
Also disable this if NO_SAFE_LIBINSTALL is defined.
There is little harm in always using -S and it fixes several issues:
- A race during 'make libraries' where, for example, libgcc_s is being
installed while another library is trying to link against it. This is
possible because libgcc_s is connected in both _prereq_libs and
_startup_libs. The first build (_prereq_libs) sets MK_PROFILE=no
while the 2nd pass (_startup_libs) enables MK_PROFILE. Thus the
libgcc_s library *is* present in WORLDTMP for other libraries to
link to, so serializing further items in _startup_libs is not
required. Just ensuring that libgcc_s is installed atomically (via
rename(2)) is enough. [1]
- Installation to a running system where some library that cannot be
detected, copied and used from the temporary INSTALLTMP with LD_LIBRARY_PATH
that the build itself uses for installation. Such an example is having the
install an NSS module for user lookups that install(1) uses while
concurrently installing the module in another process. This is not
a problem for the FreeBSD base build but can be for downstream
vendors. While this is a very specific case, installation to a
running system with non-atomic library installation is prone to many
problems. A further step still is to install in proper dependency
ordering.
Reported by: dhw many times [1]
Sponsored by: Dell EMC Isilon
MFC after: 2 weeks
== Rationale ==
r295380 introduced "make check" and consolidated means for running
test code in an attempt to simplify running tests. One could either
install files/libraries/programs and run "make check", or run "make check"
with an explicit CHECKDIR, e.g., `make check CHECKDIR=$(make -V.OBJDIR)``.
One criticism that was received is that "make check" should be run with
the intent of making dev->test->commit easier, which means that the target
audience's workflow should be developers. One developer pattern available
in other opensource projects is to run test code from a developer sandbox,
instead of installing to a system.
== Method ==
This approach is slightly different from the standard approach, in the sense
that it builds and installs into a deterministic directory under .OBJDIR (as I call it,
the "sandbox"), then runs "make check" against that. In the event the test
run is successful, the deterministic directory is removed to save space.
== Approach ==
bsd.lib.mk, bsd.prog.mk:
To support this functionality, a new variable `HAS_TESTS` is being added.
HAS_TESTS enables appropriate behavior with bsd.lib.mk and bsd.prog.mk, as
follows:
- Add "make check" as an available target from the directory.
- Pass down appropriate variables via ${TESTS_ENV}, i.e.,
${TESTS_LD_LIBRARY_PATH} and ${TESTS_PATH}.
One should add "HAS_TESTS" to directories containing tests in them, e.g. from
bin/sh/Makefile,
HAS_TESTS=
SUBDIR.${MK_TESTS}+= tests
HAS_TESTS doesn't automatically add the tests subdirectory for flexibility
reasons.
bsd.opts.mk, src.opts.mk:
- The knob ${MK_MAKE_CHECK_USE_SANDBOX} has been added, both to explicitly
direct (internally) when to set a deterministic ${DESTDIR} and to also allow
users to disable this behavior globally, i.e., via src.conf.
- MK_TESTS has been promoted from src.opts.mk to bsd.opts.mk to leverage
syntactic sugar for having MK_TESTS be a dependency for
MK_MAKE_CHECK_USE_SANDBOX, but to also ensure that src.opts.mk isn't required
to use suite.test.mk (which is a dependency of bsd.test.mk).
suite.test.mk:
- beforecheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Build.
-- Run "make hierarchy" on the sandbox dir.
-- Install the tests/files to the sandbox dir.
- aftercheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Remove the sandbox dir.
Again, because the dependency order set in bsd.test.mk is
beforecheck -> check -> aftercheck, "make check" will not be run unless
"beforecheck" completes successfully, and "aftercheck" will not be run unless
"beforecheck" and "check" complete successfully.
== Caveats ==
- This target must either be run with MK_INSTALL_AS_USER or as root. Otherwise
it will fail when running "make install" as the default user/group for many
makefiles when calling INSTALL is root/wheel.
- This target must be run from a suitable top-level directory. For example,
running tests from `tests/sys/fs/tmpfs` won't work, but `tests/sys/fs` will,
because `tests/sys/fs/tmpfs` relies on files installed by `tests/sys/fs`.
- Running MK_INSTALL_AS_USER may introduce determinism issues. However, using
it could identify deficiences in tests in terms of needing to be run as
root, which are not properly articulated in the test requirements.
- The doesn't negate the need for running "make installworld" and
"make checkworld", etc. Again, this just is intended to simplify the
dev->test->commit workflow.
== Cleanup done ==
- CHECKDIR is removed; one can use "MK_MAKE_CHECK_USE_SANDBOX=no" to enable
"legacy" (r295380) behavior.
MFC after: 2 months
Relnotes: yes (CHECKDIR removed; "make check" behavior changed)
Requested by: jhb
Reviewed by: arch (silence), testing (silence)
Differential Revision: D11905
time. Remove it from here. As far as I could tell, nothing in ports
use it (either __ARM_ARCH or __ARM_ARCH_6__ is used in all the
apatches). We do have a define for _ARM_ARCH_6, but it's mostly unused
(and will remain, since it isn't in this file).
This excess / was introduced in r280129, and fixed in r295230, but got
re-introduced while merging another branch in r298107.
Approved by: gjb
Differential Revision: https://reviews.freebsd.org/D11995
Consolidate all the regular expressions to convert from MACHINE_ARCH
to MACHINE_CPUARCH into a variable and use that variable in preference
to the almost identical copies in the tree (which should have been
identical).
Differential Revision: https://reviews.freebsd.org/D11986
svnversion metadata to the runtime and kernel packages.
Instead of traversing src/sys, as is done by newvers.sh for uname(1),
a full tree walk is done to prevent userland and/or modifications
from not being reflected in a modified tree (M).
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
New version is not compatible on supervisor mode with v1.9.1
(previous version).
Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800
The assembly in sys/mips/include/profile.h will only work for o32 ABI.
Submitted by: Alexander Richardson
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11950
src.conf(5) should document which knobs are which and the dependency between each;
remove the comment so the variable can apply to non-"meta mode options".
MFC after: 2 weeks
- bsd.compiler.mk: Must ensure that the CCACHE_WRAPPER_PATH comes first
in PATH.
- Makefile.inc1: Must prepend the CCACHE_WRAPPER_PATH into BPATH as it
overrides the PATH set in bsd.compiler.mk in sub-makes. The PATH
set in bsd.compiler.mk is not exported and doing so would cause it to
then override the BPATH set from environment. The only sane solution
is to prepend into BPATH as needed.
CCACHE_PATH could possibly be used for some of this as well.
Sponsored by: Dell EMC Isilon
This uses the /usr/local/libexec/ccache/<cc,c++> wrappers rather than
modifying CC to be '/usr/local/bin/ccache cc'. Some forms of compilation
do not support the 'command' type.
Sponsored by: Dell EMC Isilon
to enable c++ program runtime coverage instrumentation.
- Pass --coverage down through LDFLAGS to ensure that libprofile_rt is used in
the linking phase, for reasons similar to what I did with SOLINKOPTS in
bsd.lib.mk@r321778.
The .covo binaries didn't really make sense after reviewing some stackoverflow posts
and other related documentation -- in particular, it would complicate matters by having
"coverage-enabled binaries" link to "coverage-enabled libraries" (aka "covo" libraries).
It's best to install the full binaries/libraries to /usr/lib/cov instead.
In order to enable this (and make sure that libprofile_rt is built properly),
libprofile_rt must be built with cross-tools.
Also, don't explicitly disable MK_COVERAGE in _libraries -- coverage support needs to
be baked in to the libraries in order for it to be effective.
Pass through --coverage in the linking phase for shared libraries -- it's necessary
to ensure that libprofile_rt is resolved properly in the _libraries phase with 2nd
order libraries, like libcom_err.so.*.
This change reverses all of r320396 and partially reverses r321758. The first commit
was the WiP approach that was proven to incorrect with the reasoning given in the first
paragraph. The second commit reverses the MK_DEBUG_FILES change because I'll probably
run into friction when trying to merge it back in to head if I leave it in (despite
the fact that I find this behavior completely unnecessary).
TODO: see if libprofile_rt's symbols should be stripped out of debug files; they are
currently duplicated between the fat binaries installed to /usr/lib/cov and the debug
files installed to /usr/lib/debug .
already built with this flag so libstand should also be build as such.
This will be needed when moving to lld as it refuses to link due to
incompatible relocations.
Sponsored by: DARPA, AFRL
This fixes 'make cleandir' to use the same ordering as 'make cleanobj'.
Meaning that SUBDIR will be recursed before the current directory is
handled. This avoids an 'rm -rf /usr/obj/usr/src/lib/libc' while
a child 'rm -rf /usr/obj/usr/src/lib/libc/tests' is being ran next,
or even removing the current directory and then recursing into a child
and using the 'missing OBJDIR' logic to remove files rather than the
directory.
The most ideal ordering here would be for 'cleanobj' and 'cleandir' to
simply remove the .OBJDIR and then not recurse at all. This is only
safe if it is guaranteed that all children directories have no orphaned
files in their source checkout and are only using obj directories. This
is usually safe from the top-level build targets and when using
WITH_AUTO_OBJ. Improving the build for those cases is coming.
Reported by: cperciva, scottl
X-MFC-With: r321427
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
- Only recurse on cleanobj/cleandir if there is no .OBJDIR being used.
If we don't recurse then bsd.obj.mk will just rm -rf the OBJDIR dir.
- When recursing on cleanobj/cleandir don't remove dependfiles/dirs
redundantly from the child and main processes. Meaning '.depend', and
'tags', and '.depend.*' will now only be removed from the main
process.
- Stop recursing on 'cleandepend' since the main process can handle
removing all files via the default glob patterns in CLEANDEPENDFILES.
- This reverts r288201, by readding recursion on 'cleanobj', due to
r291635 changing how bsd.subdir.mk handles recursion.
This is primarily targeting ESTALE NFS errors from rm(1) during a
buildworld but is also a performance optimization as both issues fixed
were redundant anyway.
Reported by: cperciva, scottl
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Also switch the logic to enable this for any non-lld linker, since
filter library support is fairly simple and is very likely supported
by any other linker capable of linking the FreeBSD base system.
MFC after: 2 months
MFC with: r321369
Sponsored by: The FreeBSD Foundation
Create libdl.so.1 as a filter for libc.so.7 which exports public dl*
functions. The functions are resolved from the rtld instead, the goal
of creating library is to avoid errors from the static linker due to
missed libdl. For static binaries, an empty .o is compiled into
libdl.a so that static binaries still get dl stubs from libc.a.
Right now lld cannot create filter objects, disable libdl on arm64
when binutils are not used.
Reviewed by: bdrewery, dim (previos version); emaste
Exp run: PR 220525, done by antoine
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D11504
`MK_ZONEINFO_LEAPSECONDS_SUPPORT == yes` and
`MK_ZONEINFO_OLD_TIMEZONES_SUPPORT == yes`.
Keep `LEAPSECONDS` and `OLDTIMEZONES` for backwards compatibility,
but print out a warning notifying users that they should use the new
variables, in an effort to migrate them to the variables. This is being
done mostly for automated build tools, etc, that might rely on these
variables being set. The variables will be removed in the future on
^/head, e.g., after ^/stable/12 is cut.
MFC after: 1 month
Relnotes: yes
Reviewed by: bdrewery
Differential Revision: D11376
In some cases bsd.linker.mk reports an error like:
make[4]: ".../share/mk/bsd.linker.mk" line 56:
Unknown linker from LD=ld -m elf32ppc_fbsd:"
For now change this to a .warning, and then assume GNU ld 2.17.50.
At present the linker type detection is used only for enabling build-id,
and we can carry on without it when type detection fails.
Also, show errors from ${LD} --version to aid in failure diagnosis.
Successful invocations of ${LD} --version produce no output on stderr
so this will not create any spam in non-failing builds.
Tested by: swills
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11424
The initial work uses static libraries instead of dynamic libraries, for
parity with pico-style libraries.
I suspect this approach is slightly flawed, but I wanted to stash the WiP,
just in case.
GNU binutils includes two linkers: ld.bfd and ld.gold. For clarity use
LINKER_TYPE=bfd to refer to ld.bfd, the original binutils linker that
identifies itself as "GNU ld".
Discussed with: bdrewery
