It make sense to have everything bluetooth related in the same package.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21502
A lot of binaries present in FreeBSD-runtime depend on it so move
the libs there.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21501
It doesn't need to be in runtime and might help people who want to
experiment with other rc system or don't use one (like in small
embedded mfsroot).
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21499
Those commands are needed to repair a FreeBSD installation so add them
to the runtime package
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21498
Bootloader file isn't needed for jails so don't include it in FreeBSD-runtime.
Reviewed by: bapt, delphij, gjb
Differential Revision: https://reviews.freebsd.org/D21496
Summary:
- basic: test application of patches created by diff -u at the
beginning/middle/end of file, which have differing amounts of context
before and after chunks being added
- limited_ctx: stems from PR 74127 in which a rogue line was getting added
when the patch should have been rejected. Similar behavior was
reproducible with larger contexts near the beginning/end of a file. See
r326084 for details
- file_creation: patch sourced from /dev/null should create the file
- file_nodupe: said patch sourced from /dev/null shouldn't dupe the contents
when re-applied (personal vendetta, WIP, see comment)
- file_removal: this follows from nodupe; the reverse of a patch sourced
from /dev/null is most naturally deleting the file, as is expected based
on GNU patch behavior (WIP)
The "nd" argument for nfsrv_checkdsattr() is no longer used by the function.
This patch deletes it. This allows subsequent patches to delete the "nd"
argument from nfsrv_proxyds(), since it's only use of "nd" was to pass it
to nfsrv_checkdsattr(). The same will then be true for nfsvno_getattr(),
which passes "nd" to nfsrv_proxyds().
Getting rid of the "nd" argument from nfsvno_getattr() avoids confusion
over why it might need "nd".
This patch is trivial and does not have any semantic effect.
Found by inspection while working on the NFSv4.2 server.
Don't free pages in a shadowing object. While this degrades MADV_FREE
to a no-op (and we could, instead, choose to fall back to
MADV_DONTNEED, at the cost of changing pmap_madvise), this is
presently considered a temporary fix. We may prefer to risk a little
fragmentation of the map by creating a zero/OBJT_DEFAULT entry over
top of the existing object and, simultaneously, revert to the existing
marking any pages in the former shadowing object in the advised region
as reclaimable. At least one consumer of MADV_FREE (snmalloc) may use
mmap() to construct zeroed pages "eventually" here anyway, so the
fragmentation may be coming anyway.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
PR: 240061
Reviewed by: markj
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21517
The NVMe standard (1.4) states
>>> 8.6 Doorbell Stride for Software Emulation
>>> The doorbell stride,...is useful in software emulation of an NVM
>>> Express controller. ... For hardware implementations of the NVM
>>> Express interface, the expected doorbell stride value is 0h.
However, hardware in the wild exists with a doorbell stride of 1
(meaning 8 byte separation). This change supports that hardware, as
well as software emulators as envisioned in Section 8.6. Since this is
the fast path, care has been taken to make this computation
efficient. The bit of math to compute an offset for each is replaced
by a memory load from cache of a pre-computed value.
MFC After: 3 days
Reviewed by: scottl@
Differential Revision: https://reviews.freebsd.org/D21514
Currently the code only bumps holdcnt and clears the VI_FREE flag, not
performing actual vhold. Since the vnode is still visible elsewhere, a
potential new user can find it and incorrectly assume it is properly held.
Use vholdl instead to correctly hold the vnode. Another place recycling
(vlrureclaim) does this already.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21522
The Host Buffer feature (NVMe 1.4 section 89) allows for the NVMe card
request the host provide it buffer for lookaside tables and maybe
other things. Report the card's minimum and preferred sizes with
nvmecontrol/camcontrol identify.
Some of the procstat tests start a program "while1" and examine the process
using procstat, but did not wait properly for it to start (kill -0 will
succeed immediately after the child process has been created).
Instead, have "while1" write something when it starts, and use a fifo to
wait for that.
PR: 233587, 233588
Reviewed by: ngie
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21519
Specifically, the following was broken:
$ mount -t procfs procfs /proc
$ ls -l /proc
r351741 reworked readdir slightly to avoid pfs_node/pidhash LOR, but
inadvertently regressed pid == NO_PID; new pfs_lookup_proc() fails for the
obvious reasons, and later pfs_visible_proc doesn't capture the
pid == NO_PID -> return 1 aspect of pfs_visible. We can infact skip this
whole block if we're operating on a directory w/ NO_PID, as it's always
visible.
Reported by: trasz
Reviewed by: mjg
Differential Revision: https://reviews.freebsd.org/D21518
Allow 'bectl list' to sort output by a given property name. The property
name is passed in using a command-line flag, '-c' for ascending order and
'-C' for descending order. The properties allowed to sort by are:
- name (the default output, even if '-c' or '-C' are not used)
- creation
- origin
- used
- usedds
- usedsnap
- usedrefreserv
The default output for 'bectl list' is now ascending alphabetical order of
BE name.
To sort by creation time from earliest to latest, the command would be
'bectl list -c creation'
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
Reviewed by: ler
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20818
This code has been written as a proof of concept, but I think that it
can be useful in general. It allows to set the status of an enclosure
slot. Practically, this means controlling whatever slot status LEDs the
enclosure provides. At present, the new command does not have sanity
checks or any conveniences. That means that it is possible to issue the
command for an invalid slot and an enclosure. But the worst I have seen
happening is either the command failing or simply being ignored. Also,
at the moment, the status has to be specified as a numeric bit mask.
The bit definitions can be found in sys/dev/mps/mpi/mpi2_init.h, they
are prefixed with MPI2_SEP_REQ_SLOTSTATUS_. The only way to address a
slot is by the enclosure handle and the slot number. Both are readily
available from mpsutil show commands.
So, future enhancements could include alternative ways to address a slot
(e.g., by a disk handle or a disk device name) and human friendly names
for slot statuses.
The new command is useful alternative to 'sas2ircu locate' command.
First, sas2ircu is a proprietary blob. Second, it supports setting only
locate / identify status bit.
Tested on HP H220 running LSI IT firmware 20.x.
Reviewed by: bapt
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20535
This fixes a hole in the situation where the resume state is left from
receiving a new dataset and, so, the state is set on the dataset itself
(as opposed to %recv child).
Additionally, distinguish incremental and resume streams in error
messages.
This was also committed to ZoL:
zfsonlinux/zfs@ebeb6f23bf
MFC after: 2 weeks
Sponsored by: CyberSecure
- Use ptoa() instead of the archaic ctob().
- Use pagezero() to zero a PDP page.
- Remove PA_MIN_ADDRESS, orphaned by r351742.
- Remove unneeded parens and an unnecessary control flow statement.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21495
Currently LOCAL_MODULES= works, but LOCAL_MODULES="" causes build errors as
.for still has the empty string to loop over. An .if empty prior to the loop
was considered, but LOCAL_MODULES has empty quotes at that point and thus,
isn't empty. A better solution likely exists, but this floats us by for
now...
GEOM is supposed to be topology-agnostic, but the GPT and BSD partition code
has arbitrary restrictions on nesting that are annoying in cases such as
running VMs on raw partitions (since the VM's partitioning scheme is not
visible to the host).
This patch adds sysctls to disable the restrictions except in the case of
BSD label (and similar) partitions with offset 0 (where we need to avoid
recursively recognizing the label).
Submitted by: Andrew Gierth
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21350
r351650 switched posixshm to using OBJT_SWAP for shm_object
r351795 added support to the swap_pager for tracking writeable mappings
Take advantage of this and start tracking writeable mappings; fd sealing
will use this to reject a seal on writing with EBUSY if any such mapping
exist.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D21456
Currently writemapping accounting is only done for vnode_pager which does
some accounting on the underlying vnode.
Extend this to allow accounting to be possible for any of the pager types.
New pageops are added to update/release writecount that need to be
implemented for any pager wishing to do said accounting, and we implement
these methods now for both vnode_pager (unchanged) and swap_pager.
The primary motivation for this is to allow other systems with OBJT_SWAP
objects to check if their objects have any write mappings and reject
operations with EBUSY if so. posixshm will be the first to do so in order to
reject adding write seals to the shmfd if any writable mappings exist.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D21456
from recent Ubuntu versions. Without it they segfault on startup.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20687
* Convert the TCP delayed ACK timer from ms to ticks as required.
This fixes the timer on platforms with hz != 1000.
* Don't delay acknowledgements which report duplicate data using
DSACKs.
Reviewed by: rrs@
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D21512
It allows a process to request that stack gap was not applied to its
stacks, retroactively. Also it is possible to control the gaps in the
process after exec.
PR: 239894
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21352
With this last piece in place, make -C /usr/src/release release.iso is
finally able to run in a jail. This was not possible before because
msdosfs cannot be mounted inside a jail.
Submitted by: ryan@ixsystems.com
Reviewed by: emaste@, imp@, gjb@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21385
The fsync flag performs an fsync(2) on the output file before closing it.
This will be useful for the ZFS test suite.
Submitted by: ryan@ixsystems.com
Reviewed by: jilles@, imp@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
These will be expanded later as I come up with good test cases; for now,
these seem to be enough to trigger bugs in base gnugrep and expose missing
features in bsdgrep.
vnodes have 2 reference counts - holdcnt to keep the vnode itself from getting
freed and usecount to denote it is actively used.
Previously all operations bumping usecount would also bump holdcnt, which is
not necessary. We can detect if usecount is already > 1 (in which case holdcnt
is also > 1) and utilize it to avoid bumping holdcnt on our own. This saves
on atomic ops.
Reviewed by: kib
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21471
When we suspend, we need to properly shutdown the NVME controller. The
controller may go into D3 state (or may have the power removed), and
to properly flush the metadata to non-volatile RAM, we must complete a
normal shutdown. This consists of deleting the I/O queues and setting
the shutodown bit. We have to do some extra stuff to make sure we
reset the software state of the queues as well.
On resume, we have to reset the card twice, for reasons described in
the attach funcion. Once we've done that, we can restart the card. If
any of this fails, we'll fail the NVMe card, just like we do when a
reset fails.
Set is_resetting for the duration of the suspend / resume. This keeps
the reset taskqueue from running a concurrent reset, and also is
needed to prevent any hw completions from queueing more I/O to the
card. Pass resetting flag to nvme_ctrlr_start. It doesn't need to get
that from the global state of the ctrlr. Wait for any pending reset to
finish. All queued I/O will get sent to the hardware as part of
nvme_ctrlr_start(), though the upper layers shouldn't send any
down. Disabling the qpairs is the other failsafe to ensure all I/O is
queued.
Rename nvme_ctrlr_destory_qpairs to nvme_ctrlr_delete_qpairs to avoid
confusion with all the other destroy functions. It just removes the
queues in hardware, while the other _destroy_ functions tear down
driver data structures.
Split parts of the hardware reset function up so that I can
do part of the reset in suspsend. Split out the software disabling
of the qpairs into nvme_ctrlr_disable_qpairs.
Finally, fix a couple of spelling errors in comments related to
this.
Relnotes: Yes
MFC After: 1 week
Reviewed by: scottl@ (prior version)
Differential Revision: https://reviews.freebsd.org/D21493
