libopenbsd is an internal library which
to bring in compatibility stuff from OpenBSD.
This will allow us to bring in more
OpenBSD utilities into the FreeBSD base system.
We similarly use libnetbsd for bringing in stuff from NetBSD.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D4078
DEX bit is set to 1 and exception raised whenever vectorized operation is
attempted on the VFP implementation that does not support it (i.e. on Cortex A7)
Actually, object classify callbacks can skip some opcodes, that could
be rewritten. We will deteremine real numbed of rewritten opcodes a bit
later in this function.
Reported by: David H. Wolfskill <david at catwhisker dot org>
to transmit the buffer.
ath_tx_start() may manipulate/reallocate the mbuf as part of the DMA
code, so we can't expect the mbuf can be returned back to the caller.
Now, the net80211 ifnet work changed the semantics slightly so
if an error is returned here, the mbuf/reference is freed by the
caller (here, it's net80211.)
So, once we reach ath_tx_start(), we never return failure. If we fail
then we still return OK and we free the mbuf/noderef ourselves, and
we increment OERRORS.
indicate service(8) script. While here, add "-l" option for listing the
set of configuration file(s) considered (in order; separated by space).
Also add "-L" for exploring all configuration files and "-E" to omit
files that don't exist from operations.
Differential Revision: https://reviews.freebsd.org/D3551
Reviewed by: allanjude
MFC after: 1 week
X-MFC-to: stable/10
Relnotes: yes
check_ipfw_rule_body() function. This function is intended to just
determine that rule has some opcodes that can be rewrited. Then the
ref_rule_objects() function will determine real number of rewritten
opcodes using classify callback.
Reviewed by: melifaro
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
object name correctness. Each type of object can do more strict checking
in own implementation. Do such checks for tables in check_table_name().
Reviewed by: melifaro
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
- Use pmap_quick_enter_page/pmap_quick_remove_page to bounce non-cacheline
aligned head and tail fragments
- Switch from static fragment size to configurable one, newer firmware
passes cache line size as cache_line_size DTB parameter.
With these changes both RPi and RPi2 pass functinal part of vchiq_test
not be found. Otherwise, relocations against such symbols will be silently
ignored instead of causing an error to be raised.
Reviewed by: kib
MFC after: 1 week
This will enable the elimination of a workaround in the USB driver that
artifically allocates buffers twice as big as they need to be (which
actually saves memory for very small buffers on the buggy platforms).
When deciding how to allocate a dma buffer, armv4, armv6, mips, and
x86/iommu all correctly check for the tag alignment <= maxsize as enabling
simple uma/malloc based allocation. Powerpc, sparc64, x86/bounce, and
arm64/bounce were all checking for alignment < maxsize; on those platforms
when alignment was equal to the max size it would fall back to page-based
allocators even for very small buffers.
This change makes all platforms use the <= check. It should be noted that
on all platforms other than arm[v6] and mips, this check is relying on
undocumented behavior in malloc(9) that if you allocate a block of a given
size it will be aligned to the next larger power-of-2 boundary. There is
nothing in the malloc(9) man page that makes that explicit promise (but the
busdma code has been relying on this behavior all along so I guess it works).
Arm and mips code uses the allocator in kern/subr_busdma_buffalloc.c, which
does explicitly implement this promise about size and alignment. Other
platforms probably should switch to the aligned allocator.
In the old days, device drivers passed NULL for the parent tag when creating
a new tag, and on arm platforms that resulted in a global tag representing
overall platform constraints being substituted in the busdma code. Now all
drivers use bus_get_dma_tag() and if there is a need to represent overall
platform constraints they will be inherited from a tag supplied by nexus or
some bus driver in the hierarchy.
The only arm platforms still relying on the old global-tag scheme were some
xscale boards with special PCI-bus constraints. This change provides those
constraints through a tag supplied by the xscale PCI bus driver, and
eliminates the few remaining references to the old global var.
Reviewed by: cognet
Previous code supported only "continuous" code without any kind of
branch instructions. To change that, new function was implemented
which parses current instruction and returns an addres where
the jump might happen (alternative addr).
mdthread structure was extended to support two breakpoints
(one directly below current instruction and the second placed
at the alternative location).
One of them must trigger regardless the instruction has or has not been
executed due to condition field.
Upon cleanup, both software breakpoints are removed.
This implementation parses only the most common instructions
that are present in the code (like 99.99% of all), but there
is a chance there are some left, not covered by the parsing routine.
Parsing is done only for 32-bit instruction, no Thumb nor Thumb-2
support is provided.
Reviewed by: kib
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4021
Verify the filesystem type using dumpfs. Add preliminary support
for NetBSD (needs to be validated)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Parameterize the mtree keywords as $DEFAULT_MTREE_KEYWORDS
- Test with the extra mtree keywords, `mode,gid,uid`.
- Add a note about mtrees with time support not working with makefs right now
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
-- -o isolevel=1 currently fails because of path comparison issues,
so mark it as an expected failure.
-- -o isolevel=3 is not implemented, so expect it to fail as an out
of bounds value [*].
PR: 203645
MFC after: 1 week
X-MFC with: r290264
Sponsored by: EMC / Isilon Storage Division
dereferencing a NULL function pointer
Add some asserts to ensure that isolevel is always either 1 or 2.
PR: 203645
Reported by: Thomas Schmitt <scdbackup@gmx.net>
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Note which options have been implemented and which options haven't
been implemented
Submitted as the following NetBSD PRs: bin/50390 and bin/50392
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
I discovered that we're logging each trap, which gets pretty spendy;
and there wasn't any further information on the pid/tid/progname involved.
I originally noticed this because I don't attach anything to /dev/log and so
the log() output stays going to the kernel. That's an oops on my part, but
I'm glad I did it.
This commit adds the following:
* a rate limiter, which could do with some eyeballs/ideas on how to
make it more predictable on SMP;
* log pid, tid, progname (comm) as part of the output.
I now get output like this:
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a10055
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a10051
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a1004d
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401159
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401155
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401151
.. which makes it much easier to start figuring out what/where to fix.
The pc looks suss (it looks like it's in kernel space); I'll dig into that one next.
Tested:
* AR9331 SoC (Carambola2)
