has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.
Submitted by: "Xin LI" delphij at frontfree dot net
MFC: maybe?
trying to use them. Set a minimum value for numdirs when using an
alternate superblock to avoid spurious numdirs == 0 error. Calculate
new fields when using an alternate superblock from a UFS1 filesystem
to avoid segment faulting.
Sponsored by: DARPA & NAI Labs.
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.
Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.
Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
that might have changed, then did a byte-by-byte comparison with
the alternate. If any unused fields got used, they had to be added
to the exception list. Such changes caused too many false alarms.
So, I have changed the comparison algorithm to compare a selected
set of fields that are not expected to change. This new algorithm
causes far fewer false hits and still does a good job of detecting
problems when they have really occurred. In particular, this change
should ease the transition to kernels supporting UFS2 which make
some significant changes to the superblock.
Sponsored by: DARPA, NAI Labs
It does not help modern compilers, and some may take some hit from it.
(I also found several functions that listed *every* of its 10 local vars with
"register" -- just how many free registers do people think machines have?)
These were mainly missing casts or wrong format strings in printf
statements, but there were also missing includes, unused variables,
functions and arguments.
The choice of `long' vs `int' still seems almost random in a lot
of places though.
when comparing with the alternate superblock. These fields are used
for temporary in-core information only. This should fix the "VALUES
IN SUPER BLOCK DISAGREE WITH THOSE IN FIRST ALTERNATE" error from
fsck_ffs that has been seen a lot recently.
1) Set the FS_NEEDSFSCK flag when unexpected problems are encountered.
2) Clear the FS_NEEDSFSCK flag after a successful foreground cleanup.
3) Refuse to run in background when the FS_NEEDSFSCK flag is set.
4) Avoid taking and removing a snapshot when the filesystem is already clean.
5) Properly implement the force cleaning (-f) flag when in preen mode.
Note that you need to have revision 1.21 (date: 2001/04/14 05:26:28) of
fs.h installed in <ufs/ffs/fs.h> defining FS_NEEDSFSCK for this to compile.
affect current systems until fsck is modified to use these new
facilities. To try out this change, set the fsck passno to zero
in /etc/fstab to cause the filesystem to be mounted without running
fsck, then run `fsck_ffs -p -B <filesystem>' after the system has
been brought up multiuser to run a background cleanup on <filesystem>.
Note that the <filesystem> in question must have soft updates enabled.
field, so it was possible for a filesystem marked clean by fsck_ffs
to cause kernel crashes later when mounted. This could occur when
fsck_ffs was used to repair a badly corrupted filesystem.
As pointed out by bde, it is not sufficient to restrict di_size to
just the superblock fs_maxfilesize limit. The use of 32-bit logical
block numbers (both in fsck and the kernel) induces another file
size limit which is usually lower than fs_maxfilesize. Also, the
old 4.3BSD filesystem does not have fs_maxfilesize initialised.
Following this change, fsck_ffs will enforce exactly the same
file size limits as are used by the kernel.
PR: kern/15065
Discussed with: bde
Reviewed by: bde, mckusick
in-core pointers to summary information. An array in this region
(fs_csp) could overflow on filesystems with a very large number of
cylinder groups (~16000 on i386 with 8k blocks). When this happens,
other fields in the superblock get corrupted, and fsck refuses to
check the filesystem.
Solve this problem by replacing the fs_csp array in 'struct fs'
with a single pointer, and add padding to keep the length of the
128-byte region fixed. Update the kernel and userland utilities
to use just this single pointer.
With this change, the kernel no longer makes use of the superblock
fields 'fs_csshift' and 'fs_csmask'. Add a comment to newfs/mkfs.c
to indicate that these fields must be calculated for compatibility
with older kernels.
Reviewed by: mckusick
effect on operation of fsck on filesystems without snapshots.
If you get compilation errors, be sure that you have copies of
/usr/include/sys/mount.h (1.94), /usr/include/sys/stat.h (1.21),
and /usr/include/ufs/ffs/fs.h (1.16) as of July 4, 2000 or later.
DIR I=64512 CONNECTED. PARENT WAS I=4032
fsck: cannot find inode 995904
fsdb found the inodes with no problem:
fsdb (inum: 64512)> inode 995904
current inode: directory
I=995904 MODE=40777 SIZE=512
MTIME=Feb 14 15:27:07 2000 [0 nsec]
CTIME=Feb 14 15:27:07 2000 [0 nsec]
ATIME=Feb 24 10:31:58 2000 [0 nsec]
OWNER=nobody GRP=nobody LINKCNT=4 FLAGS=0 BLKCNT=2 GEN=38a41386
Direct blocks: 8094568 0 0 0 0 0 0 0 0 0 0 0
Indirect blocks: 0 0 0
The problem turns out to be a program logic error in fsck. It stores
directory inodes internally in hash lists, using the number of
directories to form the hash key:
inpp = &inphead[inumber % numdirs];
Elsewhere, however, it increments numdirs when it finds unattached
directories. I've made the following fix, which solved the problem in
the case in hand.
Submitted by: Greg Lehey <grog@lemis.com>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
Approved by: Kirk McKusick <mckusick@mckusick.com>
Submitted by: Kirk McKusick <mckusick@McKusick.COM>
Obtained from: Mckusick, BSDI and a host of others
This exactly matches Kirks sources imported under the
Tag MCKUSICK2. These are as supplied by kirk with one small
change needed to compile under freeBSD.
Some FreeBSD patches will be added back, though many have been
added to Kirk's sources already.
superblock is invalid, fsck looks at the label to help guess where
the next superblock should be. If the partition type is 4.2BSD,
fsck assumed that the block size was valid and divided by it, so
it dumped core if the size was 0.
Initialization of the label was broken almost 3 years ago in rev.1.9
of newfs/newfs.c. Newfs does not change the label at all, so there
is no problem (except the breakage of the automatic search for
backup superblocks) unless something else sets the partition type
to 4.2BSD. However, it is too easy to set partition types to
4.2.BSD by copying an old label or by using a disktab entry to
create the label.
PR: 2537
something closer to how we used to do it. The Lite2 way is to check the
"fsclean" flag in the superblock and stop there if so (during preen).
We now do the various superblock sanity checks that we used to do before
since it's cheap. We now get the filesystem state summary again instead
of "FILESYSTEM CLEAN; CHECKING SKIPPED" (or whatever).
