We haven't noticed that it was missing because eisa has been disabled for
a while in -current, but it became apparent when some parallel-build stuff
was MFC'd to 10-stable and this module failed to build there.
This provides a minor cleanup in elfdump; there are otherwise no
consumers in the tree. Old SUN documentation can be found for either
variant, but GNU binutils switched to DT_FEATURE around 2000.
Sponsored by: The FreeBSD Foundation
The goal is to clear the video memory, in case an application drew to
it. So the content shouldn't be loaded in the latches, it can't be
trusted anyway.
This improves a bit the window switch speed.
MFC after: 1 week
At the same time, "w" and "h" members are now called "width" and
"height". The goal is to have a more "public" structure, because it will
soon be passed as argument to a new callback, replacing vd_bitbltchr_t.
MFC after: 1 week
Later, we just see if the "struct mouse_cursor" pointer is set. This
avoids the need to mess with all the conditions several times; this has
been error prone.
While here, rename the variable "m" to a more meaningful "cursor", like
it's done elsewhere in the code.
MFC after: 1 week
The executable itself doesn't contain any privileged information.
An example of where this is useful is when makefs(8) is creating an image
that includes /sbin/shutdown. This can now be done without root privileges.
Reviewed by: delphij
Discussed with: delphij, des
CR: https://reviews.freebsd.org/D662
QSFP+ data via i2c inteface. These constants has been taken
from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
such as Chelsio T5.
This commit does not contain ioctl changes necessary for this
functionality work, there will be another commit soon.
Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
ether 00:07:43:28:ad:08
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 40Gbase-LR4 <full-duplex>
status: active
plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
module temperature: 64.06 C voltage: 3.26 Volts
lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)
Tested on: Chelsio T5
Tested on: Mellanox/Huawei passive/active cables/transceivers.
MFC after: 2 weeks
Sponsored by: Yandex LLC
This fixes bad looking refresh when switching window: squares instead
of text, flashing screen, and so on. In the worst case, vt_flush() came
at a very inappropriate timing and the screen was not refreshed at all
(leaving squares all over the place).
This doesn't fix the flickering of the screen with vt_vga, because the
sync signal is temporarily stopped and the video memory is cleared.
MFC after: 1 week
Back in 2011 obrien has added the #define macro in sys/sys/stddef.h to
guard ptrdiff_t. Add similar protection to the identical code in
include/stddef.h.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
MFC after: 1 week
Like r270273, this has no effect for now, because the cursor is always
drawn. This is in preparation of future changes to vd_bitbltchr_t API.
MFC after: 1 week
Currently, this has no effect, because the cursor is always redrawn
anyway. But this will be useful after improvements to the vd_bitbltchr_t
callback API.
The vt_device structure members used to store the position of the cursor
as of the last redraw are renamed from vd_mdirty{x,y} to vd_mold{x,y}.
The associated comment is fixed too. Also, their value is now expressed
in pixels, not in character columns/row.
MFC after: 1 week
This avoids unnecessary redraw. In particular, during boot, where the
cursor is disabled and its fake position is [0;0], this triggered a
refresh of the whole screen each time vt_flush() is called.
MFC after: 1 week
Before the global flag was set/unset using the CONS_MOUSECTL ioctl, and
the per-window flag through the MOUSE_SETLEVEL or MOUSE_SETMODE ioctls.
Also, if the cursor is already enabled/disabled, return immediatly. This
avoids to reset the cursor's position to the center of the screen.
This matches syscons' behavior.
While here, remove a trailing space and a redundant variable
declaration.
that's only mostly similar. Specifically word 78 bits are defined for
IDENTIFY DEVICE as
5 Supports Hardware Feature Control
while a IDENTIFY PACKET DEVICE defines them as
5 Asynchronous notification supported
Therefore, only pay attention to bit 5 when we're talking to ATAPI
devices (we don't use the hardware feature control at this time).
Ignore it for ATA devices. Remove kludge that papered over this issue
for Samsung SATA SSDs, since Micron drives also have the bit set and
the error was caused by this bad interpretation of the spec (which is
quite easy to do, since bits aren't normally overlapping like this).
conversions have been detected and fixed.
It is now possible to add options after the encoding in the parameter
list for convert-keymap.pl. This is currently used to selectively
enable interpretation of the ISO8859-1 currency symbol as the Euro
sign found in ISO5589-15, or to add a Yen symbol in place of '\' for
specific Japanese keyboards. The option are appended to the parameter
list, as in e.g. "convert-keymap.pl german.iso.kbd ISO5589-1 EURO".
The options are appended to the encoding in the form "+EURO" or "+YEN"
in KBDFILES.map, to keep the meaning of the columns intact.
MFC after: 3 days
sbin/devd/tests/client_test.c
* In the event that popen fails, don't dereference its return value.
* Fix array overwrite in the stream and seqpacket tests.
* Close sockets at the end of successful ATF tests.
Reported by: Coverity scan
CID: 1232019, 1232020, 1232029, 1232030
MFC after: 1 week
Sponsored by: Spectra Logic
. interrupt storm detected on "intr70:"; throttling interrupt source;
. Added access serialization on iicbus_transfer(), previously there was
no such protection and a new transfer could easily confuse the
controller;
. Add error checkings (i.e. stop the transfer when a error is detected
and do _not_ overwrite the previous error);
. On command done interrupt do not assume that the transfer was finished
sucessfully as we will receive the command done interrupt even after
errors;
. Simplify the FIFO handling;
. Reset the FIFO between the transfers as the FIFO may contain data from
the last (failed) transfer;
. Fix the iicbus speed for AM335x, which in turn will make better use of
the I2C noise filter (set to one internal clock cycle);
. Move the read and write handler to ithread instead of notifying the
requesting thread with wakeup(9);
. Fix the comments based on OMAP4 TRM.
The above changes allows me to read the EDID from my HDMI monitor on BBB
with gonzo's patches to support TDA19988 (which does 128 bytes reads) and
repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus.
Phabric: D465
several updates to the converter tools. There is now support for hybrid
source keymaps, which e.g. use ISO8859-1 (not -15) but still provide an
Euro key (on the "E" key). ISO8859-1 currency symbols on other keys are
still converted to that character, not the Euro sign. A similar hack was
applied to the Japanese keyboards to add the Yen key, that could not be
expressed in SYSCONS.
Several modifications have been applied after the conversion (removal of
unused accents tables, some reformatting, exchange of a few key symbols).
The German keymap (de.kbd) is now using deadkeys only for those keys,
that behave that way under Windows. There are now ".acc" and ".noacc"
variants, which use deadkeys vs. nodeadkeys for all accent keys.
I'm still in the process of comparing keymaps that existed in different
encodings in SYSCONS. These are generally translated slightly differently,
either because of mistakes, or because of different preferences, or due
to limitations of the respective encoding.
MFC after: 3 days
tests/sys/kern/unix_seqpacket_test.c
* Remove a duplicate error check in mk_pair_of_sockets
* Always close sockets in the success path of ATF test cases. Don't
bother with the error paths, because those are mostly assertions
anyway. Most of these socket leaks were reported by Coverity.
All of them are harmless, because each ATF test case runs in its
own process.
* Fix the len argument to send in shutdown_send and
shutdown_send_sigpipe. The old version was using sizeof a pointer
instead of sizeof the char array. Reported by Coverity.
* Change a few ATF_CHECK to ATF_REQUIRE if the test can't reasonably
continue past a failure.
Reported by: Coverity Scan
CID: 1229995, 1229991, 1229988, 1229994, 1229989, 1229992
CID: 1229993, 1229990, 1229984, 1229967, 1230005, 1229977
CID: 1229966, 1230004, 1229976
MFC after: 1 week
Sponsored by: Spectra Logic
