While here, avoid using the old variable 'code' and remove it
in trap(). ('code' was meant for holding things like %dr6,
but is too small to hold %dr6 on amd64 and was reduced to an
obfuscation of tf_err, with early truncation on amd64.)
Submitted by: Michael Butler (imb@...)
gmultipath.8: Add HISTORY
Adjust sentences with bad phrases picked up by igor
ggatec.8: Add HISTORY
ggated.8: Add HISTORY
ggatel.8: Add HISTORY
Seperate out sentence as advised by igor.
hastctl.8: Add HISTORY
hastd.8: Add HISTORY
Fix sentence highlighted by igor.
iscontrol.8: Add HISTORY
mdmfs.8: Add HISTORY
Address issues raised by igor
mount_nfs.8: Add HISTORY
Not sure where mount_nfs first showed up, but the verison used
in the BSD's originates from 4.4BSD according to CSRG archive.
Though commercial offerings from Sun and others covers older
systems, eg https://groups.google.com/forum/#!topic/net.unix-wizards/lMe7aQikqJI
nandfs.8: Add HISTORY
Adjust sentence in description to address bad phrase highlighted
by igor.
nvmecontrol.8: Add HISTORY
PR: 212491
PR: 212498
PR: 212499
PR: 212500
PR: 212501
PR: 212502
PR: 212505
PR: 212508
PR: 212540
PR: 212543
PR: 212546
Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
A standalone reboot utility showed up in 4.0BSD, in AT&T UNIX init has a
case for reboot and is present in the version shipped with V5
either way, current entry is incorrect.
PR: 212548
Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
build can break when different source files create the same object
files (case-insensitivity speaking). This is the case for _Exit.c
and _exit.s. Compile _Exit.c as C99_Exit.c
Reviewed by: sjg@
MFC after: completion
Sponsored by: Bracket Computing
Differential Revision: https://reviews.freebsd.org/D7893
The fill pattern was previously an ia64 instruction sequence. Presumably
ia64's linker script was copied as a starting point.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
come up as 't6nex' nexus devices with 'cc' ports hanging off them.
The T6 firmware and configuration files will be added as soon as they
are released. For now the driver will try to work with whatever
firmware and configuration is on the card's flash.
Sponsored by: Chelsio Communications
Add IEEE80211_KEY_SWCRYPT / IEEE80211_KEY_SWMIC bits to the
IEEE80211_KEY_DEVICE mask - as a result, those bits will be preserved
during group key handshake.
A driver can override them in iv_key_alloc() for some keys in case
when hardware crypto support is not possible. As an example:
- multi-vap without multicast key search support;
- IBSS RSN for devices w/ fixed storage for group keys;
Tested with RTL8188EU (AP, sw crypto) and
RTL8821AU (STA, sw crypto for group keys + hw crypto for pairwise keys)
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D7901
Move to a per-proc TLS offset rather than incorrectly keying off the
presense of freebsd32 compability in the kernel.
Reviewed by: adrian, sbruno
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D7843
This is not very easy to do, since ddb didn't know when traps are
for single-stepping. It more or less assumed that traps are either
breakpoints or single-step, but even for x86 this became inadequate
with the release of the i386 in ~1986, and FreeBSD passes it other
trap types for NMIs and panics.
On x86, teach ddb when a trap is for single stepping using the %dr6
register. Unknown traps are now treated almost the same as breakpoints
instead of as the same as single-steps. Previously, the classification
of breakpoints was almost correct and everything else was unknown so
had to be treated as a single-step. Now the classification of single-
steps is precise, the classification of breakpoints is almost correct
(as before) and everything else is unknown and treated like a
breakpoint.
This fixes:
- breakpoints not set by ddb, including the main one in kdb_enter(),
were treated as single-steps and not stopped on when stepping
(except for the usual, simple case of a step with residual count 1).
As special cases, kdb_enter() didn't stop for fatal traps or panics
- similarly for "hardware breakpoints".
Use a new MD macro IS_SSTEP_TRAP(type, code) to code to classify
single-steps. This is excessively complicated for bug-for-bug and
backwards compatibilty. Design errors apparently started in Mach
in ~1990 or perhaps in the FreeBSD interface in ~1993. Common trap
types like single steps should have a unique MI code (like the TRAP*
codes for user SIGTRAP) so that debuggers don't need macros like
IS_SSTEP_TRAP() to decode them. But 'type' is actually an ambiguous
MD trap number, and code was always 0 (now it is (int)%dr6 on x86).
So it was impossible to determine the trap type from the args.
Global variables had to be used.
There is already a classification macro db_pc_is_single_step(), but
this just gets in the way. It is only used to recover from bugs in
IS_BREAKPOINT_TRAP(). On some arches, IS_BREAKPOINT_TRAP() just
duplicates the ambiguity in 'type' and misclassifies single-steps as
breakpoints. It defaults to 'false', which is the opposite of what is
needed for bug-for-bug compatibility.
When this is cleaned up, MI classification bits should be passed in
'code'. This could be done now for positive-logic bits, since 'code'
was always 0, but some negative logic is needed for compatibility so
a simple MI classificition is not usable yet.
After reading %dr6, clear the single-step bit in it so that the type
of the next debugger trap can be decoded. This is a little
ddb-specific. ddb doesn't understand the need to clear this bit and
doing it before calling kdb is easiest. gdb would need to reverse
this to support hardware breakpoints, but it just doesn't support
them now since gdbstub doesn't support %dr*.
Fix a bug involving %dr6: when emulating a single-step trap for vm86,
set the bit for it in %dr6. Userland debuggers need this. ddb now
needs this for vm86 bios calls. The bit gets copied to 'code' then
cleared again.
Fix related style bugs:
- when clearing bits for hardware breakpoints in %dr6, spell the mask
as ~0xf on both amd64 and i386 to get the correct number of bits
using sign extension and not need a comment about using the wrong
mask on amd64 (amd64 traps for invalid results but clearing the
reserved top bits didn't trap since they are 0).
- rewrite my old wrong comments about using %dr6 for ddb watchpoints.
The 'cpu' and 'cpu_class' variables were always set to the same value
on amd64 and are legacy holdovers from i386. Remove them entirely on
amd64.
Reviewed by: imp, kib (older version)
Differential Revision: https://reviews.freebsd.org/D7888
errx() prefixes the error string with argv[0] so including "login: "
in the string is redundant. Also remove a superfluous newline.
Sponsored by: The FreeBSD Foundation
Sync libarchive with vendor including important security fixes.
Issues fixed (FreeBSD):
PR #778: ACL error handling
Issue #745: Symlink check prefix optimization is too aggressive
Issue #746: Hard links with data can evade sandboxing restrictions
This update fixes the vulnerability #3 and vulnerability #4 as reported in
"non-cryptanalytic attacks against FreeBSD update components".
https://gist.github.com/anonymous/e48209b03f1dd9625a992717e7b89c4f
Fix for vulnerability #2 has already been merged in r304989.
MFC after: 1 week
Security: http://gist.github.com/anonymous/e48209b03f1dd9625a992717e7b89c4f
Vendor issues fixed (FreeBSD):
PR #778: ACL error handling
Issue #745: Symlink check prefix optimization is too aggressive
Issue #746: Hard links with data can evade sandboxing restrictions
This update fixes the vulnerability #3 and vulnerability #4 as reported in
the "non-cryptanalytic attacks against FreeBSD update components".
https://gist.github.com/anonymous/e48209b03f1dd9625a992717e7b89c4f
Vulnerability #2 has already been fixed in r304866
The first argument of calloc(3) should be an ordinal type, and the
second a size: split a multiplication to make better use of calloc(3)
and detect overflows.
Do some other re-ordering and style fixes while here.
MFC after: 3 weeks
The second argment to calloc(3) should be the size, make it so.
While here be a little bit more cautious in fifolog_reader_open()
to protect in the unlikely event of an overflowed allocation.
MFC after: 3 weeks
* TCP_KEEPINIT
* TCP_KEEPINTVL
* TCP_KEEPIDLE
* TCP_KEEPCNT
always always report the values currently used when getsockopt()
is used. This wasn't the case when the sysctl-inherited default
values where used.
Ensure that the IPPROTO_TCP level socket option TCP_INFO has the
TCPI_OPT_ECN flag set in the tcpi_options field when ECN support
has been negotiated successfully.
Reviewed by: rrs, jtl, hiren
MFC after: 1 month
Differential Revision: 7833
SEL_UPL and sometimes PSL_VM. This is just a style change on amd64,
but on i386 it fixes 1 unimportant place where the PSL_VM check was
missing and starts fixing 1 important place where the PSL_VM check
had a logic error.
Fix logic errors in treating vm86 bioscall mode as kernel mode. The
main place checked all the necessary flags, but put the necessary
parentheses for the PSL_VM and PCB_VM86CALL checks in the wrong
place. The broken case is only reached if a vm86 bioscall uses a
%cs which is nonzero mod 4, but that is unusual -- most bios calls
start with %cs = 0xc000 or 0xf000 and rarely change it. Another
place was missing the check for PCB_VM86CALL, but was only reachable
if there are bugs virtualizing PSL_I.
Add a macro TF_HAS_STACKREGS() and use this instead of converting
open-coded checks of SEL_UPL, etc. to TRAPF_USERMODE() when we only
care about whether the frame has stack registers. This fixes 3
places in my recent fix for register variables in vm86 mode where I
messed up the PSL_VM check and cleans up other places.
mutexes or using any callouts when active.
Trying to lock a mutex when KDB is active or the scheduler is stopped
can result in infinite wait loops. The same goes for calling callout
related functions which in turn lock mutexes.
If the USB controller at which a USB keyboard is connected is idle
when KDB is entered, polling the USB keyboard via USB will always
succeed. Else polling may fail depending on which state the USB
subsystem and USB interrupt handler is in. This is unavoidable unless
KDB can wait for USB interrupt threads to complete before stalling the
CPU(s).
Tested by: Bruce Evans <bde@freebsd.org>
MFC after: 4 weeks
- ifnet.if_mtu does not require explicit setting.
- ifnet.if_hdrlen must be set after ether_ifattach().
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7873
It is available on both stable/10 and stable/11. This eases future MFCs
to stable/10.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7872
This paves the way for the dynamic RSS key and indirect table setting.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7864