To avoid conflicts between target and initiator devices in CAM, make
CTL use target ID reported by HBA as its initiator_id in XPT_PATH_INQ.
That target ID is known to never be used for initiator role, so it won't
conflict. For Fibre Channel and FireWire HBAs this specific ID choice
is irrelevant since all target IDs there are virtual. Same time for SPI
HBAs it seems could be even requirement to use same target ID for both
initiator and target roles.
While there are some more things to polish in isp(4) driver, first tests
of using both roles same time on the same port appeared successfull:
# camcontrol devlist -v
scbus0 on isp0 bus 0:
<FREEBSD CTLDISK 0001> at scbus0 target 1 lun 0 (da20,pass21)
<> at scbus0 target 256 lun 0 (ctl0)
<> at scbus0 target -1 lun ffffffff (ctl1)
FreeBSD never had limitation on number of target IDs, and there is no
any other requirement to allocate them densely. Since slots of port
database already populated just sequentially, there is no much need
for another indirection to allocate sequentially too.
[SCCP] Turn loads of null into undef instead of zero initialized values
Surprisingly, this is a correctness issue: the mmx type exists for
calling convention purposes, LLVM doesn't have a zero representation for
them.
This partially fixes PR23999.
Pull in r241143 from upstream llvm trunk (by David Majnemer):
[LoopUnroll] Use undef for phis with no value live
We would create a phi node with a zero initialized operand instead of
undef in the case where no value was originally available. This was
problematic for x86_mmx which has no null value.
These fix a "Cannot create a null constant of that type!" error when
compiling the graphics/sdl2_gfx port with MMX enabled.
Reported by: amdmi3
On Book-E, physical addresses are actually 36-bits, not 32-bits. This is
currently worked around by ignoring the top bits. However, in some cases, the
boot loader configures CCSR to something above the 32-bit mark. This is stage 1
in updating the pmap to handle 36-bit physaddr.
This will print out the Memory Subsystem Status Register on MPC745x (G4+ class),
and the Machine Check Status Register on Book-E class CPUs, to aid in debugging
machine checks. Other relevant registers, for other CPUs, can be added in the
future.
This function is equivalent to fclose(3) function except that it
does not close the underlying file descriptor.
fdclose(3) is step forward to make FILE structure private.
Reviewed by: wblock, jilles, jhb, pjd
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D2697
directory sys/contrib/libnv.
The goal of this operation is to NOT install header files which shouldn't
be used outside the nvlist library.
Approved by: pjd (mentor)
make the find it does extremely expensive, so compute it only
once. Also make sure the 'traditional' module building method works at
the expense of a bit of duplicated code.
and start teaching subsystems about it.
The Atheros MIPS platforms don't guarantee any kind of FIFO consistency
with interrupts in hardware. So software needs to do a flush when it
receives an interrupt and before it calls the interrupt handler.
There are new ones for the QCA934x and QCA955x, so do a few things:
* Get rid of the individual ones (for ethernet and IP2);
* Create a mux and enum listing all the variations on DDR flushes;
* replace the uses of IP2 with the relevant one (which will typically
be "PCI" here);
* call the USB DDR flush before calling the real USB interrupt handlers;
* call the ethernet one upon receiving an interrupt that's for us,
rather than never calling it during operation.
Tested:
* QCA9558 (TP-Link archer c7 v2)
* AR9331 (Carambola 2)
TODO:
* PCI, USB, ethernet, etc need to do a double-check to see if the
interrupt was truely for them before doing the DDR. For now I
prefer "correct" over "fast".
This stops the panics that occur on MIPS platforms when doing say,
'sysctl dev.ath.0' whilst the MAC is asleep. The MIPS platform is
rather unforgiving in getting power-save register access wrong and you
will get all kinds of odd failures if you don't have things woken
up at the right times.
Tested:
* QCA9558 (TP-Link Archer C7 v2)
* AR9331 (Carambola 2)
.. with no VAPs configured and ath0 down (thus the MAC is definitely
asleep.)
PR: kern/201117
Allow Makefiles to define generic metadata settings that apply to all test
programs defined by a Makefile. The generic TEST_METADATA variable extends
the per-test program settings already supported via TEST_METADATA.<program>.
This feature will be useful to easily apply some settings to all programs
in a directory. In particular, Kyua 0.12 will support parallel execution
of test programs and a bunch of them will need to be tagged as is_exclusive
to indicate that they cannot be run in parallel with anything else due to
their side-effects. It will be reasonable to set this setting on whole
directories.
MFC after: 1 week
Plain test programs are not preprocessed by the build system (as opposed to
ATF test cases, which automatically gain a shebang pointing at atf-sh), so
we must take care of providing the shebang ourselves.
I'm not sure why this was not causing problems with Kyua 0.11, but the
upcoming 0.12 release chokes on this particular issue.
MFC after: 1 week
cleanup routines can be executed at any point during the execution of the
body, including even before the body has done any real work. In those
cases, cleanup routines should be careful to not raise spurious errors so
as to not "override" the actual result of the test case.
This is just general good coding style but is not a problem in practice
for these specific tests. (The way I discovered the issue, though, was
due to a regression I introduced in Kyua itself while refactoring some
internals.)
MFC after: 1 week
The true cause of the missing UFS/MSDOSFS labels has been
identified, and only affects stable/10 at the moment.
An request for commit to stable/10 will be pending RE approval
after this commit.
MFC after: 1 day
X-MFC-Note: never
X-MFC-Never: r285018, r285019, r285076, r285078, r285082
Sponsored by: The FreeBSD Foundation
the kernel would generate a bogus one with a ":/<path>" suffix.
This would only occur for the case where there was no explicit
"principal" argument and the getaddrinfo() call in mount_nfs.c failed to a
return a cannonical name for the server.
This patch fixes this unusual case.
PR: 201073
Submitted by: masato@itc.naist.jp
MFC after: 2 weeks
Update setkey and libipsec to understand aes-gcm-16 as an
encryption method.
A partial commit of the work in review D2936.
Submitted by: eri
Reviewed by: jmg
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
change to GMAC easier on A20 SoCs.
On A10 only the EMAC controller is available (fast ethernet), but on A20
there is also GMAC a high (or better) performant controller (gigabit
ethernet).
On A20 the both controllers uses the same pins to talk to the ethernet PHY
(MII or RGMII) and they can be selected by the GPIO pin mux.
There is work in progress to bring in GMAC support.
