Bruce for putting lots of effort into these; getting them right isn't
easy, and they went through many iterations.
Submitted by: Steve Kargl <sgk@apl.washington.edu> with revisions from bde
is a violation of RFC 1034 [STD 13], it is accepted by certain name servers
as well as other popular operating systems' resolver library.
Bugs are mine.
Obtained from: ume
MFC after: 2 weeks
of disk names, where you must free each pointer, as well as the array
by hand. [1]
- Destaticize "disks" in Disk_Names, it has no reasons to be static.
PR: kern/96077 [1]
PR: kern/114110 [1]
MFC after: 1 month
Approved by: rwatson (mentor)
the same operation of lockmgr() but accepting a custom wmesg, prio and
timo for the particular lock instance, overriding default values
lkp->lk_wmesg, lkp->lk_prio and lkp->lk_timo.
- Use lockmgr_args() in order to implement BUF_TIMELOCK()
- Cleanup BUF_LOCK()
- Remove LK_INTERNAL as it is nomore used in the lockmgr namespace
Tested by: Andrea Barberio <insomniac at slackware dot it>
fundamentally fairly confused about how signals work and when it is
appropriate for upcalls to be interrupted. In particular, we should
be exempting certain upcalls from interruption, we should not always
eventually time out sleeping on a upcall, and we should not be
interrupting the sleep for certain signals that we currently are
(including SIGINFO). This code needs to be reworked in the style of
NFS interruptible mounts.
MFC after: 1 month
various open flags and then tests various operations to make sure that
they are properly constrained by open flags. Various I/O mechansms
are tried, including aio if compiled into the kernel or loaded as a
module. There's more to be done here but it's a useful start, running
about 220 individual tests.
This is in support of FreeBSD-SA-08:03.sendfile.
for rpcbind(8) to crash.
The crash was due to a boolean variable initialized
improperly. Besides fixing the initialization, pick
a better name for the variable so that its meaning is
clear and no more coding errors appear around it.
under it while running. Note that this is still not perfect:
- Try to do something intelligent if kvm_read() fails to read a routing
table structure such as an rtentry, radix_node, or ifnet.
- Don't follow left and right node pointers in radix_nodes unless
RNF_ACTIVE is set in rn_flags. This avoids walking through freed
radix_nodes.
MFC after: 1 week
coherent with the data caches. Implement a quick fix to allow
us to boot on Montecito, while I'm working on a better fix in
the mean time.
Commit made on Montecito-based Itanium...
is to be requested via a "ro" option. At the same time, MNT_RDONLY
is gradually becoming an indicator of the current state of the FS
instead of a command flag. Today passing MNT_RDONLY alone to the
kernel's mount machinery will lead to various glitches. (See the
PRs for examples.)
Therefore mount the root FS with a "ro" option instead of the
MNT_RDONLY flag. (Note that MNT_RDONLY still is added to the mount
flags internally, by vfs_donmount(), if "ro" was specified.)
To be able to pass "ro" cleanly to kernel_vmount(), teach the latter
function to accept options with NULL values.
Also correct the comment explaining how mount_arg() handles length
of -1.
PR: bin/106636 kern/120319
Submitted by: Jaakko Heinonen <see PR kern/120319 for email> (originally)
legacy interrupts rather than MSI as a special case. Prior to this
commit, the interrupt handler was doing the slow handshaking with
the device to ensure the legacy interrupt was lowered in both
the legacy and MSI-X case. This handshaking was not
required for MSI-X.
|x| or |y| and b is |y| or |x|) when mixing NaN arg(s).
hypot*() had its own foot shooting for mixing NaNs -- it swaps the
args so that |x| in bits is largest, but does this before quieting
signaling NaNs, so on amd64 (where the result of adding NaNs depends
on the order) it gets inconsistent results if setting the quiet bit
makes a difference, just like a similar ia64 and i387 hardware comparison.
The usual fix (see e_powf.c 1.13 for more details) of mixing using
(a+0.0)+-(b+0.0) doesn't work on amd64 if the args are swapped (since
the rder makes a difference with SSE). Fortunately, the original args
are unchanged and don't need to be swapped when we let the hardware
decide the mixing after quieting them, but we need to take their
absolute value.
hypotf() doesn't seem to have any real bugs masked by this non-bug.
On amd64, its maximum error in 2^32 trials on amd64 is now 0.8422 ulps,
and on i386 the maximum error is unchanged and about the same, except
with certain CFLAGS it magically drops to 0.5 (perfect rounding).
Convert to __FBSDID().
(x+0.0)-(y+0.0) for mixing NaNs documented in a previous log message
didn't actually get committed. Apparently, adding 0.0 uniformizes
the order enough to give consistent results.
be into 12+24 bits of precision for extra-precision multiplication,
but was into 13+24 bits. On i386 with -O1 the bug was hidden by
accidental extra precision, but on amd64, in 2^32 trials the bug
caused about 200000 errors of more than 1 ulp, with a maximum error
of about 80 ulps. Now the maximum error in 2^32 trials on amd64
is 0.8573 ulps. It is still 0.8316 ulps on i386 with -O1.
The nearby decomposition of 1/ln2 and the decomposition of 2/(3ln2) in
the double precision version seem to be sub-optimal but not broken.
This uses 2 tricks to improve consistency so that more serious problems
aren't hidden in simple regression tests by noise for the NaNs:
- for a signaling NaN, adding 0.0 generates the invalid exception and
converts to a quiet NaN, and doesn't have too many effects for other
types of args (it converts -0 to +0 in some rounding modes, but that
hopefully doesn't change the result after adding the NaN arg). This
avoids some inconsistencies on i386 and ia64. On these arches, the
result of an operation on 2 NaNs is apparently the largest or the
smallest of the NaNs as bits (consistently largest or smallest for
each arch, but the opposite). I forget which way the comparison
goes and if the sign bit affects it. The quiet bit is is handled
poorly by not always setting it before the comparision or ignoring
it. Thus if one of the args was originally a signaling NaN and the
other was originally a quiet NaN, then the result depends too much
on whether the signaling NaN has been quieted at this point, which
in turn depends on optimizations and promotions. E.g., passing float
signaling NaNs to double functions must quiet them on conversion;
on i387, loading a signaling NaN of type float or double (but not
long double) into a register involves a conversion, so it quiets
signaling NaNs, so if the addition has 2 register operands than it
only sees quiet NaNs, but if the addition has a memory operand then
it sees a signaling NaN iff it is in the memory operand.
- subtraction instead of addition is used to avoid a dubious optimization
in old versions of gcc. For SSE operations, mixing of NaNs apparently
always gives the target operand. This is not as good as the i387
and ia64 behaviour. It doesn't mix NaNs at all, and makes addition
not quite commutative. Old versions of gcc sometimes rewrite x+y
to y+x and thus give different results (in bits) for NaNs. gcc-3.3.3
rewrites x+y to y+x for one of pow() and powf() but not the other,
so starting from float NaN args x and y, powf(x, y) was almost always
different from pow(x, y).
These tricks won't give consistency of 2-arg float and double functions
with long double ones on amd64, since long double ones use the i387
which has different semantics from SSE.
Convert to __FBSDID().
allocator for jumbo frame.
o Removed unneeded jlist lock which was used to manage jumbo
buffers.
o Don't reinitialize hardware if MTU was not changed.
o Added additional check for minimal MTU size.
o Added a new tunable hw.skc.jumbo_disable to disable jumbo frame
support for the driver. The tunable could be set for systems that
do not need to use jumbo frames and it would save
(9K * number of Rx descriptors) bytes kernel memory.
o Jumbo buffer allocation failure is no longer critical error for
the operation of sk(4). If sk(4) encounter the allocation failure
it just disables jumbo frame support and continues to work without
user intervention.
With these changes jumbo frame performance of sk(4) was slightly
increased and users should not encounter jumbo buffer allocation
failure. Previously sk(4) tried to allocate physically contiguous
memory, 3388KB for 256 Rx descriptors. Sometimes that amount of
contiguous memory region could not be available for running systems
which in turn resulted in failure of loading the driver.
Tested by: Cy Schubert < Cy.Schubert () komquats dot com >
