mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-19 10:53:58 +00:00
715 lines
25 KiB
C
715 lines
25 KiB
C
/* $NetBSD: ixp425reg.h,v 1.19 2005/12/11 12:16:51 christos Exp $ */
|
|
/*
|
|
* Copyright (c) 2003
|
|
* Ichiro FUKUHARA <ichiro@ichiro.org>.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Ichiro FUKUHARA.
|
|
* 4. The name of the company nor the name of the author may be used to
|
|
* endorse or promote products derived from this software without specific
|
|
* prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY ICHIRO FUKUHARA ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL ICHIRO FUKUHARA OR THE VOICES IN HIS HEAD BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*
|
|
*/
|
|
|
|
#ifndef _IXP425REG_H_
|
|
#define _IXP425REG_H_
|
|
|
|
/*
|
|
* Physical memory map for the Intel IXP425
|
|
*/
|
|
/*
|
|
* CC00 00FF ---------------------------
|
|
* SDRAM Configuration Registers
|
|
* CC00 0000 ---------------------------
|
|
*
|
|
* C800 BFFF ---------------------------
|
|
* System and Peripheral Registers
|
|
* C800 0000 ---------------------------
|
|
* Expansion Bus Configuration Registers
|
|
* C400 0000 ---------------------------
|
|
* PCI Configuration and Status Registers
|
|
* C000 0000 ---------------------------
|
|
*
|
|
* 6400 0000 ---------------------------
|
|
* Queue manager
|
|
* 6000 0000 ---------------------------
|
|
* Expansion Bus Data
|
|
* 5000 0000 ---------------------------
|
|
* PCI Data
|
|
* 4800 0000 ---------------------------
|
|
*
|
|
* 4000 0000 ---------------------------
|
|
* SDRAM
|
|
* 0000 0000 ---------------------------
|
|
*/
|
|
|
|
/*
|
|
* Virtual memory map for the Intel IXP425/IXP435 integrated devices
|
|
*/
|
|
/*
|
|
* FFFF FFFF ---------------------------
|
|
*
|
|
* Global cache clean area
|
|
* FF00 0000 ---------------------------
|
|
*
|
|
* FE00 0000 ---------------------------
|
|
* 16M CFI Flash (on ext bus)
|
|
* FD00 0000 ---------------------------
|
|
*
|
|
* FC00 0000 ---------------------------
|
|
* PCI Data (memory space)
|
|
* F800 0000 --------------------------- IXP425_PCI_MEM_VBASE
|
|
*
|
|
* F020 1000 ---------------------------
|
|
* SDRAM/DDR Memory Controller
|
|
* F020 0000 --------------------------- IXP425_MCU_VBASE
|
|
*
|
|
* F001 F000 RS485 (Cambria) CAMBRIA_RS485_VBASE
|
|
* F001 E000 GPS (Cambria) CAMBRIA_GPS_VBASE
|
|
* F001 D000 EHCI USB 2 (IXP435) IXP435_USB2_VBASE
|
|
* F001 C000 EHCI USB 1 (IXP435) IXP435_USB1_VBASE
|
|
* Queue manager
|
|
* F001 8000 --------------------------- IXP425_QMGR_VBASE
|
|
* PCI Configuration and Status
|
|
* F001 7000 --------------------------- IXP425_PCI_VBASE
|
|
*
|
|
* (NB: gap for future addition of EXP CS5-7)
|
|
* F001 4000 Expansion Bus Chip Select 4
|
|
* F001 3000 Expansion Bus Chip Select 3
|
|
* F001 2000 Expansion Bus Chip Select 2
|
|
* F001 1000 Expansion Bus Chip Select 1
|
|
* Expansion Bus Configuration
|
|
* F001 0000 --------------------------- IXP425_EXP_VBASE
|
|
*
|
|
* F000 C000 MAC-A (IXP435)
|
|
* F000 B000 USB (option on IXP425)
|
|
* F000 A000 MAC-B (IXP425) | MAC-C (IXP435)
|
|
* F000 9000 MAC-A (IXP425)
|
|
* F000 8000 NPE-C
|
|
* F000 7000 NPE-B (IXP425)
|
|
* F000 6000 NPE-A
|
|
* F000 5000 Timers
|
|
* F000 4000 GPIO Controller
|
|
* F000 3000 Interrupt Controller
|
|
* F000 2000 Performance Monitor Controller (PMC)
|
|
* F000 1000 UART 1 (IXP425)
|
|
* F000 0000 UART 0
|
|
* F000 0000 --------------------------- IXP425_IO_VBASE
|
|
*
|
|
* 0000 0000 ---------------------------
|
|
*
|
|
*/
|
|
|
|
/* Physical/Virtual address for I/O space */
|
|
|
|
#define IXP425_IO_VBASE 0xf0000000UL
|
|
#define IXP425_IO_HWBASE 0xc8000000UL
|
|
#define IXP425_IO_SIZE 0x00010000UL
|
|
|
|
/* Physical/Virtual addresss offsets */
|
|
#define IXP425_UART0_OFFSET 0x00000000UL
|
|
#define IXP425_UART1_OFFSET 0x00001000UL
|
|
#define IXP425_PMC_OFFSET 0x00002000UL
|
|
#define IXP425_INTR_OFFSET 0x00003000UL
|
|
#define IXP425_GPIO_OFFSET 0x00004000UL
|
|
#define IXP425_TIMER_OFFSET 0x00005000UL
|
|
#define IXP425_NPE_A_OFFSET 0x00006000UL /* Not User Programmable */
|
|
#define IXP425_NPE_B_OFFSET 0x00007000UL /* Not User Programmable */
|
|
#define IXP425_NPE_C_OFFSET 0x00008000UL /* Not User Programmable */
|
|
#define IXP425_MAC_B_OFFSET 0x00009000UL /* Ethernet MAC on NPE-B */
|
|
#define IXP425_MAC_C_OFFSET 0x0000a000UL /* Ethernet MAC on NPE-C */
|
|
#define IXP425_USB_OFFSET 0x0000b000UL
|
|
|
|
#define IXP435_MAC_A_OFFSET 0x0000c000UL /* Ethernet MAC on NPE-A */
|
|
|
|
#define IXP425_REG_SIZE 0x1000
|
|
|
|
/*
|
|
* UART
|
|
* UART0 0xc8000000
|
|
* UART1 0xc8001000
|
|
*
|
|
*/
|
|
/* I/O space */
|
|
#define IXP425_UART0_HWBASE (IXP425_IO_HWBASE + IXP425_UART0_OFFSET)
|
|
#define IXP425_UART1_HWBASE (IXP425_IO_HWBASE + IXP425_UART1_OFFSET)
|
|
|
|
#define IXP425_UART0_VBASE (IXP425_IO_VBASE + IXP425_UART0_OFFSET)
|
|
/* 0xf0000000 */
|
|
#define IXP425_UART1_VBASE (IXP425_IO_VBASE + IXP425_UART1_OFFSET)
|
|
/* 0xf0001000 */
|
|
|
|
#define IXP425_UART_FREQ 14745600
|
|
|
|
#define IXP425_UART_IER 0x01 /* interrupt enable register */
|
|
#define IXP425_UART_IER_RTOIE 0x10 /* receiver timeout interrupt enable */
|
|
#define IXP425_UART_IER_UUE 0x40 /* UART Unit enable */
|
|
|
|
/*#define IXP4XX_COM_NPORTS 8*/
|
|
|
|
/*
|
|
* Timers
|
|
*/
|
|
#define IXP425_TIMER_HWBASE (IXP425_IO_HWBASE + IXP425_TIMER_OFFSET)
|
|
#define IXP425_TIMER_VBASE (IXP425_IO_VBASE + IXP425_TIMER_OFFSET)
|
|
|
|
#define IXP425_OST_TS 0x0000
|
|
#define IXP425_OST_TIM0 0x0004
|
|
#define IXP425_OST_TIM1 0x000C
|
|
|
|
#define IXP425_OST_TIM0_RELOAD 0x0008
|
|
#define IXP425_OST_TIM1_RELOAD 0x0010
|
|
#define TIMERRELOAD_MASK 0xFFFFFFFC
|
|
#define OST_ONESHOT_EN (1U << 1)
|
|
#define OST_TIMER_EN (1U << 0)
|
|
|
|
#define IXP425_OST_STATUS 0x0020
|
|
#define OST_WARM_RESET (1U << 4)
|
|
#define OST_WDOG_INT (1U << 3)
|
|
#define OST_TS_INT (1U << 2)
|
|
#define OST_TIM1_INT (1U << 1)
|
|
#define OST_TIM0_INT (1U << 0)
|
|
|
|
#define IXP425_OST_WDOG 0x0014
|
|
#define IXP425_OST_WDOG_ENAB 0x0018
|
|
#define IXP425_OST_WDOG_KEY 0x001c
|
|
#define OST_WDOG_KEY_MAJICK 0x482e
|
|
#define OST_WDOG_ENAB_RST_ENA (1u << 0)
|
|
#define OST_WDOG_ENAB_INT_ENA (1u << 1)
|
|
#define OST_WDOG_ENAB_CNT_ENA (1u << 2)
|
|
|
|
/*
|
|
* Interrupt Controller Unit.
|
|
* PA 0xc8003000
|
|
*/
|
|
|
|
#define IXP425_IRQ_HWBASE IXP425_IO_HWBASE + IXP425_INTR_OFFSET
|
|
#define IXP425_IRQ_VBASE IXP425_IO_VBASE + IXP425_INTR_OFFSET
|
|
/* 0xf0003000 */
|
|
#define IXP425_IRQ_SIZE 0x00000020UL
|
|
|
|
#define IXP425_INT_STATUS (IXP425_IRQ_VBASE + 0x00)
|
|
#define IXP425_INT_ENABLE (IXP425_IRQ_VBASE + 0x04)
|
|
#define IXP425_INT_SELECT (IXP425_IRQ_VBASE + 0x08)
|
|
#define IXP425_IRQ_STATUS (IXP425_IRQ_VBASE + 0x0C)
|
|
#define IXP425_FIQ_STATUS (IXP425_IRQ_VBASE + 0x10)
|
|
#define IXP425_INT_PRTY (IXP425_IRQ_VBASE + 0x14)
|
|
#define IXP425_IRQ_ENC (IXP425_IRQ_VBASE + 0x18)
|
|
#define IXP425_FIQ_ENC (IXP425_IRQ_VBASE + 0x1C)
|
|
|
|
#define IXP425_INT_SW1 31 /* SW Interrupt 1 */
|
|
#define IXP425_INT_SW0 30 /* SW Interrupt 0 */
|
|
#define IXP425_INT_GPIO_12 29 /* GPIO 12 */
|
|
#define IXP425_INT_GPIO_11 28 /* GPIO 11 */
|
|
#define IXP425_INT_GPIO_10 27 /* GPIO 11 */
|
|
#define IXP425_INT_GPIO_9 26 /* GPIO 9 */
|
|
#define IXP425_INT_GPIO_8 25 /* GPIO 8 */
|
|
#define IXP425_INT_GPIO_7 24 /* GPIO 7 */
|
|
#define IXP425_INT_GPIO_6 23 /* GPIO 6 */
|
|
#define IXP425_INT_GPIO_5 22 /* GPIO 5 */
|
|
#define IXP425_INT_GPIO_4 21 /* GPIO 4 */
|
|
#define IXP425_INT_GPIO_3 20 /* GPIO 3 */
|
|
#define IXP425_INT_GPIO_2 19 /* GPIO 2 */
|
|
#define IXP425_INT_XSCALE_PMU 18 /* XScale PMU */
|
|
#define IXP425_INT_AHB_PMU 17 /* AHB PMU */
|
|
#define IXP425_INT_WDOG 16 /* Watchdog Timer */
|
|
#define IXP425_INT_UART0 15 /* HighSpeed UART */
|
|
#define IXP425_INT_STAMP 14 /* Timestamp Timer */
|
|
#define IXP425_INT_UART1 13 /* Console UART */
|
|
#define IXP425_INT_USB 12 /* USB */
|
|
#define IXP425_INT_TMR1 11 /* General-Purpose Timer1 */
|
|
#define IXP425_INT_PCIDMA2 10 /* PCI DMA Channel 2 */
|
|
#define IXP425_INT_PCIDMA1 9 /* PCI DMA Channel 1 */
|
|
#define IXP425_INT_PCIINT 8 /* PCI Interrupt */
|
|
#define IXP425_INT_GPIO_1 7 /* GPIO 1 */
|
|
#define IXP425_INT_GPIO_0 6 /* GPIO 0 */
|
|
#define IXP425_INT_TMR0 5 /* General-Purpose Timer0 */
|
|
#define IXP425_INT_QUE33_64 4 /* Queue Manager 33-64 */
|
|
#define IXP425_INT_QUE1_32 3 /* Queue Manager 1-32 */
|
|
#define IXP425_INT_NPE_C 2 /* NPE C */
|
|
#define IXP425_INT_NPE_B 1 /* NPE B */
|
|
#define IXP425_INT_NPE_A 0 /* NPE A */
|
|
|
|
/* NB: IXP435 has an additional 32 IRQ's */
|
|
#define IXP435_INT_STATUS2 (IXP425_IRQ_VBASE + 0x20)
|
|
#define IXP435_INT_ENABLE2 (IXP425_IRQ_VBASE + 0x24)
|
|
#define IXP435_INT_SELECT2 (IXP425_IRQ_VBASE + 0x28)
|
|
#define IXP435_IRQ_STATUS2 (IXP425_IRQ_VBASE + 0x2C)
|
|
#define IXP435_FIQ_STATUS2 (IXP425_IRQ_VBASE + 0x30)
|
|
|
|
#define IXP435_INT_USB0 32 /* USB Host 2.0 Host 0 */
|
|
#define IXP435_INT_USB1 33 /* USB Host 2.0 Host 1 */
|
|
#define IXP435_INT_QMGR_PER 60 /* Queue manager parity error */
|
|
#define IXP435_INT_ECC 61 /* Single or multi-bit ECC error */
|
|
|
|
/*
|
|
* software interrupt
|
|
*/
|
|
#define IXP425_INT_bit31 31
|
|
#define IXP425_INT_bit30 30
|
|
#define IXP425_INT_bit14 14
|
|
#define IXP425_INT_bit11 11
|
|
|
|
#define IXP425_INT_HWMASK (0xffffffff & \
|
|
~((1 << IXP425_INT_bit31) | \
|
|
(1 << IXP425_INT_bit30) | \
|
|
(1 << IXP425_INT_bit14) | \
|
|
(1 << IXP425_INT_bit11)))
|
|
#define IXP425_INT_GPIOMASK (0x3ff800c0u)
|
|
|
|
#define IXP435_INT_HWMASK ((1 << (IXP435_INT_USB0 - 32)) | \
|
|
(1 << (IXP435_INT_USB1 - 32)) | \
|
|
(1 << (IXP435_INT_QMGR_PER - 32)) | \
|
|
(1 << (IXP435_INT_ECC - 32)))
|
|
|
|
/*
|
|
* GPIO
|
|
*/
|
|
#define IXP425_GPIO_HWBASE IXP425_IO_HWBASE + IXP425_GPIO_OFFSET
|
|
#define IXP425_GPIO_VBASE IXP425_IO_VBASE + IXP425_GPIO_OFFSET
|
|
/* 0xf0004000 */
|
|
#define IXP425_GPIO_SIZE 0x00000020UL
|
|
|
|
#define IXP425_GPIO_GPOUTR 0x00
|
|
#define IXP425_GPIO_GPOER 0x04
|
|
#define IXP425_GPIO_GPINR 0x08
|
|
#define IXP425_GPIO_GPISR 0x0c
|
|
#define IXP425_GPIO_GPIT1R 0x10
|
|
#define IXP425_GPIO_GPIT2R 0x14
|
|
#define IXP425_GPIO_GPCLKR 0x18
|
|
# define GPCLKR_MUX14 (1U << 8)
|
|
# define GPCLKR_CLK0TC_SHIFT 4
|
|
# define GPCLKR_CLK0DC_SHIFT 0
|
|
|
|
/* GPIO Output */
|
|
#define GPOUT_ON 0x1
|
|
#define GPOUT_OFF 0x0
|
|
|
|
/* GPIO direction */
|
|
#define GPOER_INPUT 0x1
|
|
#define GPOER_OUTPUT 0x0
|
|
|
|
/* GPIO Type bits */
|
|
#define GPIO_TYPE_ACT_HIGH 0x0
|
|
#define GPIO_TYPE_ACT_LOW 0x1
|
|
#define GPIO_TYPE_EDG_RISING 0x2
|
|
#define GPIO_TYPE_EDG_FALLING 0x3
|
|
#define GPIO_TYPE_TRANSITIONAL 0x4
|
|
#define GPIO_TYPE_MASK 0x7
|
|
#define GPIO_TYPE(b,v) ((v) << (((b) & 0x7) * 3))
|
|
#define GPIO_TYPE_REG(b) (((b)&8)?IXP425_GPIO_GPIT2R:IXP425_GPIO_GPIT1R)
|
|
|
|
#define IXP4XX_GPIO_PINS 16
|
|
|
|
/*
|
|
* Expansion Bus Configuration Space.
|
|
*/
|
|
#define IXP425_EXP_HWBASE 0xc4000000UL
|
|
#define IXP425_EXP_VBASE 0xf0010000UL
|
|
#define IXP425_EXP_SIZE 0x1000
|
|
|
|
/* offset */
|
|
#define EXP_TIMING_CS0_OFFSET 0x0000
|
|
#define EXP_TIMING_CS1_OFFSET 0x0004
|
|
#define EXP_TIMING_CS2_OFFSET 0x0008
|
|
#define EXP_TIMING_CS3_OFFSET 0x000c
|
|
#define EXP_TIMING_CS4_OFFSET 0x0010
|
|
#define EXP_TIMING_CS5_OFFSET 0x0014
|
|
#define EXP_TIMING_CS6_OFFSET 0x0018
|
|
#define EXP_TIMING_CS7_OFFSET 0x001c
|
|
#define EXP_CNFG0_OFFSET 0x0020
|
|
#define EXP_CNFG1_OFFSET 0x0024
|
|
#define EXP_FCTRL_OFFSET 0x0028
|
|
|
|
#define IXP425_EXP_RECOVERY_SHIFT 16
|
|
#define IXP425_EXP_HOLD_SHIFT 20
|
|
#define IXP425_EXP_STROBE_SHIFT 22
|
|
#define IXP425_EXP_SETUP_SHIFT 26
|
|
#define IXP425_EXP_ADDR_SHIFT 28
|
|
#define IXP425_EXP_CS_EN (1U << 31)
|
|
|
|
#define IXP425_EXP_RECOVERY_T(x) (((x) & 15) << IXP425_EXP_RECOVERY_SHIFT)
|
|
#define IXP425_EXP_HOLD_T(x) (((x) & 3) << IXP425_EXP_HOLD_SHIFT)
|
|
#define IXP425_EXP_STROBE_T(x) (((x) & 15) << IXP425_EXP_STROBE_SHIFT)
|
|
#define IXP425_EXP_SETUP_T(x) (((x) & 3) << IXP425_EXP_SETUP_SHIFT)
|
|
#define IXP425_EXP_ADDR_T(x) (((x) & 3) << IXP425_EXP_ADDR_SHIFT)
|
|
|
|
/* EXP_CSn bits */
|
|
#define EXP_BYTE_EN 0x00000001 /* bus uses only 8-bit data */
|
|
#define EXP_WR_EN 0x00000002 /* ena writes to CS region */
|
|
/* bit 2 is reserved */
|
|
#define EXP_SPLT_EN 0x00000008 /* ena AHB split transfers */
|
|
#define EXP_MUX_EN 0x00000010 /* multiplexed address/data */
|
|
#define EXP_HRDY_POL 0x00000020 /* HPI|HRDY polarity */
|
|
#define EXP_BYTE_RD16 0x00000040 /* byte rd access to word dev */
|
|
#define EXP_CNFG 0x00003c00 /* device config size */
|
|
#define EXP_SZ_512 (0 << 10)
|
|
#define EXP_SZ_1K (1 << 10)
|
|
#define EXP_SZ_2K (2 << 10)
|
|
#define EXP_SZ_4K (3 << 10)
|
|
#define EXP_SZ_8K (4 << 10)
|
|
#define EXP_SZ_16K (5 << 10)
|
|
#define EXP_SZ_32K (6 << 10)
|
|
#define EXP_SZ_64K (7 << 10)
|
|
#define EXP_SZ_128K (8 << 10)
|
|
#define EXP_SZ_256K (9 << 10)
|
|
#define EXP_SZ_512K (10 << 10)
|
|
#define EXP_SZ_1M (11 << 10)
|
|
#define EXP_SZ_2M (12 << 10)
|
|
#define EXP_SZ_4M (13 << 10)
|
|
#define EXP_SZ_8M (14 << 10)
|
|
#define EXP_SZ_16M (15 << 10)
|
|
#define EXP_CYC_TYPE 0x0000c000 /* bus cycle "type" */
|
|
#define EXP_CYC_INTEL (0 << 14)
|
|
#define EXP_CYC_MOTO (1 << 14)
|
|
#define EXP_CYC_HPI (2 << 14)
|
|
#define EXP_T5 0x000f0000 /* recovery timing */
|
|
#define EXP_T4 0x00300000 /* hold timing */
|
|
#define EXP_T3 0x03c00000 /* strobe timing */
|
|
#define EXP_T2 0x0c000000 /* setup/chip select timing */
|
|
#define EXP_T1 0x30000000 /* address timing */
|
|
/* bit 30 is reserved */
|
|
#define EXP_CS_EN 0x80000000 /* chip select enabled */
|
|
|
|
/* EXP_CNFG0 bits */
|
|
#define EXP_CNFG0_8BIT (1 << 0)
|
|
#define EXP_CNFG0_PCI_HOST (1 << 1)
|
|
#define EXP_CNFG0_PCI_ARB (1 << 2)
|
|
#define EXP_CNFG0_PCI_66MHZ (1 << 4)
|
|
#define EXP_CNFG0_MEM_MAP (1 << 31)
|
|
|
|
/* EXP_CNFG1 bits */
|
|
#define EXP_CNFG1_SW_INT0 (1 << 0)
|
|
#define EXP_CNFG1_SW_INT1 (1 << 1)
|
|
|
|
#define EXP_FCTRL_RCOMP (1<<0)
|
|
#define EXP_FCTRL_USB_DEVICE (1<<1)
|
|
#define EXP_FCTRL_HASH (1<<2)
|
|
#define EXP_FCTRL_AES (1<<3)
|
|
#define EXP_FCTRL_DES (1<<4)
|
|
#define EXP_FCTRL_HDLC (1<<5)
|
|
#define EXP_FCTRL_AAL (1<<6)
|
|
#define EXP_FCTRL_HSS (1<<7)
|
|
#define EXP_FCTRL_UTOPIA (1<<8)
|
|
#define EXP_FCTRL_ETH0 (1<<9)
|
|
#define EXP_FCTRL_ETH1 (1<<10)
|
|
#define EXP_FCTRL_NPEA (1<<11) /* reset */
|
|
#define EXP_FCTRL_NPEB (1<<12) /* reset */
|
|
#define EXP_FCTRL_NPEC (1<<13) /* reset */
|
|
#define EXP_FCTRL_PCI (1<<14)
|
|
#define EXP_FCTRL_ECC_TIMESYNC (1<<15)
|
|
#define EXP_FCTRL_UTOPIA_PHY (3<<16) /* PHY limit */
|
|
#define EXP_FCTRL_USB_HOST (1<<18)
|
|
#define EXP_FCTRL_NPEA_ETH (1<<19)
|
|
#define EXP_FCTRL_NPEB_ETH (1<<20)
|
|
#define EXP_FCTRL_RSA (1<<21)
|
|
#define EXP_FCTRL_MAXFREQ (3<<22) /* XScale frequency */
|
|
#define EXP_FCTRL_RESVD (0xff<<24)
|
|
|
|
#define EXP_FCTRL_IXP46X_ONLY \
|
|
(EXP_FCTRL_ECC_TIMESYNC | EXP_FCTRL_USB_HOST | EXP_FCTRL_NPEA_ETH | \
|
|
EXP_FCTRL_NPEB_ETH | EXP_FCTRL_RSA | EXP_FCTRL_MAXFREQ)
|
|
|
|
#define EXP_FCTRL_BITS \
|
|
"\20\1RCOMP\2USB\3HASH\4AES\5DES\6HDLC\7AAL\10HSS\11UTOPIA\12ETH0" \
|
|
"\13ETH1\17PCI\20ECC\23USB_HOST\24NPEA_ETH\25NPEB_ETH\26RSA"
|
|
|
|
/*
|
|
* PCI
|
|
*/
|
|
#define IXP425_PCI_HWBASE 0xc0000000
|
|
#define IXP425_PCI_VBASE 0xf0017000UL
|
|
#define IXP425_PCI_SIZE 0x1000
|
|
|
|
#define IXP425_AHB_OFFSET 0x00000000UL /* AHB bus */
|
|
|
|
/*
|
|
* Mapping registers of IXP425 PCI Configuration
|
|
*/
|
|
/* PCI_ID_REG 0x00 */
|
|
/* PCI_COMMAND_STATUS_REG 0x04 */
|
|
/* PCI_CLASS_REG 0x08 */
|
|
/* PCI_BHLC_REG 0x0c */
|
|
#define PCI_MAPREG_BAR0 0x10 /* Base Address 0 */
|
|
#define PCI_MAPREG_BAR1 0x14 /* Base Address 1 */
|
|
#define PCI_MAPREG_BAR2 0x18 /* Base Address 2 */
|
|
#define PCI_MAPREG_BAR3 0x1c /* Base Address 3 */
|
|
#define PCI_MAPREG_BAR4 0x20 /* Base Address 4 */
|
|
#define PCI_MAPREG_BAR5 0x24 /* Base Address 5 */
|
|
/* PCI_SUBSYS_ID_REG 0x2c */
|
|
/* PCI_INTERRUPT_REG 0x3c */
|
|
#define PCI_RTOTTO 0x40
|
|
|
|
/* PCI Controller CSR Base Address */
|
|
#define IXP425_PCI_CSR_BASE IXP425_PCI_VBASE
|
|
|
|
/* PCI Memory Space */
|
|
#define IXP425_PCI_MEM_HWBASE 0x48000000UL
|
|
#define IXP425_PCI_MEM_VBASE 0xf8000000UL
|
|
#define IXP425_PCI_MEM_SIZE 0x04000000UL /* 64MB */
|
|
|
|
/* PCI I/O Space */
|
|
#define IXP425_PCI_IO_HWBASE 0x00000000UL
|
|
#define IXP425_PCI_IO_SIZE 0x00100000UL /* 1Mbyte */
|
|
|
|
/* PCI Controller Configuration Offset */
|
|
#define PCI_NP_AD 0x00
|
|
#define PCI_NP_CBE 0x04
|
|
# define NP_CBE_SHIFT 4
|
|
#define PCI_NP_WDATA 0x08
|
|
#define PCI_NP_RDATA 0x0c
|
|
#define PCI_CRP_AD_CBE 0x10
|
|
#define PCI_CRP_AD_WDATA 0x14
|
|
#define PCI_CRP_AD_RDATA 0x18
|
|
#define PCI_CSR 0x1c
|
|
# define CSR_PRST (1U << 16)
|
|
# define CSR_IC (1U << 15)
|
|
# define CSR_ABE (1U << 4)
|
|
# define CSR_PDS (1U << 3)
|
|
# define CSR_ADS (1U << 2)
|
|
# define CSR_HOST (1U << 0)
|
|
#define PCI_ISR 0x20
|
|
# define ISR_AHBE (1U << 3)
|
|
# define ISR_PPE (1U << 2)
|
|
# define ISR_PFE (1U << 1)
|
|
# define ISR_PSE (1U << 0)
|
|
#define PCI_INTEN 0x24
|
|
#define PCI_DMACTRL 0x28
|
|
#define PCI_AHBMEMBASE 0x2c
|
|
#define PCI_AHBIOBASE 0x30
|
|
#define PCI_PCIMEMBASE 0x34
|
|
#define PCI_AHBDOORBELL 0x38
|
|
#define PCI_PCIDOORBELL 0x3c
|
|
#define PCI_ATPDMA0_AHBADDR 0x40
|
|
#define PCI_ATPDMA0_PCIADDR 0x44
|
|
#define PCI_ATPDMA0_LENGTH 0x48
|
|
#define PCI_ATPDMA1_AHBADDR 0x4c
|
|
#define PCI_ATPDMA1_PCIADDR 0x50
|
|
#define PCI_ATPDMA1_LENGTH 0x54
|
|
#define PCI_PTADMA0_AHBADDR 0x58
|
|
#define PCI_PTADMA0_PCIADDR 0x5c
|
|
#define PCI_PTADMA0_LENGTH 0x60
|
|
#define PCI_PTADMA1_AHBADDR 0x64
|
|
#define PCI_PTADMA1_PCIADDR 0x68
|
|
#define PCI_PTADMA1_LENGTH 0x6c
|
|
|
|
/* PCI target(T)/initiator(I) Interface Commands for PCI_NP_CBE register */
|
|
#define COMMAND_NP_IA 0x0 /* Interrupt Acknowledge (I)*/
|
|
#define COMMAND_NP_SC 0x1 /* Special Cycle (I)*/
|
|
#define COMMAND_NP_IO_READ 0x2 /* I/O Read (T)(I) */
|
|
#define COMMAND_NP_IO_WRITE 0x3 /* I/O Write (T)(I) */
|
|
#define COMMAND_NP_MEM_READ 0x6 /* Memory Read (T)(I) */
|
|
#define COMMAND_NP_MEM_WRITE 0x7 /* Memory Write (T)(I) */
|
|
#define COMMAND_NP_CONF_READ 0xa /* Configuration Read (T)(I) */
|
|
#define COMMAND_NP_CONF_WRITE 0xb /* Configuration Write (T)(I) */
|
|
|
|
/* PCI byte enables */
|
|
#define BE_8BIT(a) ((0x10u << ((a) & 0x03)) ^ 0xf0)
|
|
#define BE_16BIT(a) ((0x30u << ((a) & 0x02)) ^ 0xf0)
|
|
#define BE_32BIT(a) 0x00
|
|
|
|
/* PCI byte selects */
|
|
#define READ_8BIT(v,a) ((u_int8_t)((v) >> (((a) & 3) * 8)))
|
|
#define READ_16BIT(v,a) ((u_int16_t)((v) >> (((a) & 2) * 8)))
|
|
#define WRITE_8BIT(v,a) (((u_int32_t)(v)) << (((a) & 3) * 8))
|
|
#define WRITE_16BIT(v,a) (((u_int32_t)(v)) << (((a) & 2) * 8))
|
|
|
|
/* PCI Controller Configuration Commands for PCI_CRP_AD_CBE */
|
|
#define COMMAND_CRP_READ 0x00
|
|
#define COMMAND_CRP_WRITE (1U << 16)
|
|
|
|
/*
|
|
* SDRAM Configuration Register
|
|
*/
|
|
#define IXP425_MCU_HWBASE 0xcc000000UL
|
|
#define IXP425_MCU_VBASE 0xf0200000UL
|
|
#define IXP425_MCU_SIZE 0x1000 /* Actually only 256 bytes */
|
|
#define MCU_SDR_CONFIG 0x00
|
|
#define MCU_SDR_CONFIG_MCONF(x) ((x) & 0x7)
|
|
#define MCU_SDR_CONFIG_64MBIT (1u << 5)
|
|
#define MCU_SDR_REFRESH 0x04
|
|
#define MCU_SDR_IR 0x08
|
|
|
|
/*
|
|
* IXP435 DDR MCU Registers
|
|
*/
|
|
#define IXP435_MCU_HWBASE 0xcc00e500UL
|
|
#define MCU_DDR_SDIR 0x00 /* DDR SDAM Initialization Reg*/
|
|
#define MCU_DDR_SDCR0 0x04 /* DDR SDRAM Control Reg 0 */
|
|
#define MCU_DDR_SDCR1 0x08 /* DDR SDRAM Control Reg 1 */
|
|
#define MCU_DDR_SDBR 0x0c /* SDRAM Base Register */
|
|
#define MCU_DDR_SBR0 0x10 /* SDRAM Boundary Register 0 */
|
|
#define MCU_DDR_SBR1 0x14 /* SDRAM Boundary Register 1 */
|
|
#define MCU_DDR_ECCR 0x1c /* ECC Control Register */
|
|
#define MCU_DDR_ELOG0 0x20 /* ECC Log Register 0 */
|
|
#define MCU_DDR_ELOG1 0x24 /* ECC Log Register 1 */
|
|
#define MCU_DDR_ECAR0 0x28 /* ECC Address Register 0 */
|
|
#define MCU_DDR_ECAR1 0x2c /* ECC Address Register 1 */
|
|
#define MCU_DDR_ECTST 0x30 /* ECC Test Register */
|
|
#define MCU_DDR_MCISR 0x34 /* MC Interrupt Status Reg */
|
|
#define MCU_DDR_MPTCR 0x3c /* MC Port Transaction Cnt Reg*/
|
|
#define MCU_DDR_RFR 0x48 /* Refresh Frequency Register */
|
|
#define MCU_DDR_SDPR(n) (0x50+(n)*4) /* SDRAM Page Register 0-7 */
|
|
/* NB: RCVDLY at 0x1050 and LEGOVERIDE at 0x1074 */
|
|
|
|
/*
|
|
* Performance Monitoring Unit (CP14)
|
|
*
|
|
* CP14.0.1 Performance Monitor Control Register(PMNC)
|
|
* CP14.1.1 Clock Counter(CCNT)
|
|
* CP14.4.1 Interrupt Enable Register(INTEN)
|
|
* CP14.5.1 Overflow Flag Register(FLAG)
|
|
* CP14.8.1 Event Selection Register(EVTSEL)
|
|
* CP14.0.2 Performance Counter Register 0(PMN0)
|
|
* CP14.1.2 Performance Counter Register 0(PMN1)
|
|
* CP14.2.2 Performance Counter Register 0(PMN2)
|
|
* CP14.3.2 Performance Counter Register 0(PMN3)
|
|
*/
|
|
|
|
#define PMNC_E 0x00000001 /* enable all counters */
|
|
#define PMNC_P 0x00000002 /* reset all PMNs to 0 */
|
|
#define PMNC_C 0x00000004 /* clock counter reset */
|
|
#define PMNC_D 0x00000008 /* clock counter / 64 */
|
|
|
|
#define INTEN_CC_IE 0x00000001 /* enable clock counter interrupt */
|
|
#define INTEN_PMN0_IE 0x00000002 /* enable PMN0 interrupt */
|
|
#define INTEN_PMN1_IE 0x00000004 /* enable PMN1 interrupt */
|
|
#define INTEN_PMN2_IE 0x00000008 /* enable PMN2 interrupt */
|
|
#define INTEN_PMN3_IE 0x00000010 /* enable PMN3 interrupt */
|
|
|
|
#define FLAG_CC_IF 0x00000001 /* clock counter overflow */
|
|
#define FLAG_PMN0_IF 0x00000002 /* PMN0 overflow */
|
|
#define FLAG_PMN1_IF 0x00000004 /* PMN1 overflow */
|
|
#define FLAG_PMN2_IF 0x00000008 /* PMN2 overflow */
|
|
#define FLAG_PMN3_IF 0x00000010 /* PMN3 overflow */
|
|
|
|
#define EVTSEL_EVCNT_MASK 0x0000000ff /* event to count for PMNs */
|
|
#define PMNC_EVCNT0_SHIFT 0
|
|
#define PMNC_EVCNT1_SHIFT 8
|
|
#define PMNC_EVCNT2_SHIFT 16
|
|
#define PMNC_EVCNT3_SHIFT 24
|
|
|
|
/*
|
|
* Queue Manager
|
|
*/
|
|
#define IXP425_QMGR_HWBASE 0x60000000UL
|
|
#define IXP425_QMGR_VBASE 0xf0018000UL
|
|
#define IXP425_QMGR_SIZE 0x4000
|
|
|
|
/*
|
|
* Network Processing Engines (NPE's) and associated Ethernet MAC's.
|
|
*/
|
|
#define IXP425_NPE_A_HWBASE (IXP425_IO_HWBASE + IXP425_NPE_A_OFFSET)
|
|
#define IXP425_NPE_A_VBASE (IXP425_IO_VBASE + IXP425_NPE_A_OFFSET)
|
|
#define IXP425_NPE_A_SIZE 0x1000 /* Actually only 256 bytes */
|
|
|
|
#define IXP425_NPE_B_HWBASE (IXP425_IO_HWBASE + IXP425_NPE_B_OFFSET)
|
|
#define IXP425_NPE_B_VBASE (IXP425_IO_VBASE + IXP425_NPE_B_OFFSET)
|
|
#define IXP425_NPE_B_SIZE 0x1000 /* Actually only 256 bytes */
|
|
|
|
#define IXP425_NPE_C_HWBASE (IXP425_IO_HWBASE + IXP425_NPE_C_OFFSET)
|
|
#define IXP425_NPE_C_VBASE (IXP425_IO_VBASE + IXP425_NPE_C_OFFSET)
|
|
#define IXP425_NPE_C_SIZE 0x1000 /* Actually only 256 bytes */
|
|
|
|
#define IXP425_MAC_B_HWBASE (IXP425_IO_HWBASE + IXP425_MAC_B_OFFSET)
|
|
#define IXP425_MAC_B_VBASE (IXP425_IO_VBASE + IXP425_MAC_B_OFFSET)
|
|
#define IXP425_MAC_B_SIZE 0x1000 /* Actually only 256 bytes */
|
|
|
|
#define IXP425_MAC_C_HWBASE (IXP425_IO_HWBASE + IXP425_MAC_C_OFFSET)
|
|
#define IXP425_MAC_C_VBASE (IXP425_IO_VBASE + IXP425_MAC_C_OFFSET)
|
|
#define IXP425_MAC_C_SIZE 0x1000 /* Actually only 256 bytes */
|
|
|
|
#define IXP435_MAC_A_HWBASE (IXP425_IO_HWBASE + IXP435_MAC_A_OFFSET)
|
|
#define IXP435_MAC_A_VBASE (IXP425_IO_VBASE + IXP435_MAC_A_OFFSET)
|
|
#define IXP435_MAC_A_SIZE 0x1000 /* Actually only 256 bytes */
|
|
|
|
/*
|
|
* Expansion Bus Data Space.
|
|
*/
|
|
#define IXP425_EXP_BUS_HWBASE 0x50000000UL
|
|
#define IXP425_EXP_BUS_SIZE 0x01000000 /* max, typically smaller */
|
|
|
|
#define IXP425_EXP_BUS_CSx_HWBASE(i) \
|
|
(IXP425_EXP_BUS_HWBASE + (i)*IXP425_EXP_BUS_SIZE)
|
|
#define IXP425_EXP_BUS_CSx_SIZE 0x1000
|
|
#define IXP425_EXP_BUS_CSx_VBASE(i) \
|
|
(0xF0011000UL + (((i)-1)*IXP425_EXP_BUS_CSx_SIZE))
|
|
|
|
/* NB: CS0 is special; it maps flash */
|
|
#define IXP425_EXP_BUS_CS0_HWBASE IXP425_EXP_BUS_CSx_HWBASE(0)
|
|
#define IXP425_EXP_BUS_CS0_VBASE 0xFD000000UL
|
|
#ifndef IXP4XX_FLASH_SIZE
|
|
#define IXP425_EXP_BUS_CS0_SIZE 0x01000000 /* NB: 16M */
|
|
#else
|
|
#define IXP425_EXP_BUS_CS0_SIZE IXP4XX_FLASH_SIZE
|
|
#endif
|
|
#define IXP425_EXP_BUS_CS1_HWBASE IXP425_EXP_BUS_CSx_HWBASE(1)
|
|
#define IXP425_EXP_BUS_CS1_VBASE IXP425_EXP_BUS_CSx_VBASE(1)
|
|
#define IXP425_EXP_BUS_CS1_SIZE IXP425_EXP_BUS_CSx_SIZE
|
|
#define IXP425_EXP_BUS_CS2_HWBASE IXP425_EXP_BUS_CSx_HWBASE(2)
|
|
#define IXP425_EXP_BUS_CS2_VBASE IXP425_EXP_BUS_CSx_VBASE(2)
|
|
#define IXP425_EXP_BUS_CS2_SIZE IXP425_EXP_BUS_CSx_SIZE
|
|
#define IXP425_EXP_BUS_CS3_HWBASE IXP425_EXP_BUS_CSx_HWBASE(3)
|
|
#define IXP425_EXP_BUS_CS3_VBASE IXP425_EXP_BUS_CSx_VBASE(3)
|
|
#define IXP425_EXP_BUS_CS3_SIZE IXP425_EXP_BUS_CSx_SIZE
|
|
#define IXP425_EXP_BUS_CS4_HWBASE IXP425_EXP_BUS_CSx_HWBASE(4)
|
|
#define IXP425_EXP_BUS_CS4_VBASE IXP425_EXP_BUS_CSx_VBASE(4)
|
|
#define IXP425_EXP_BUS_CS4_SIZE IXP425_EXP_BUS_CSx_SIZE
|
|
|
|
/* NB: not mapped (yet) */
|
|
#define IXP425_EXP_BUS_CS5_HWBASE IXP425_EXP_BUS_CSx_HWBASE(5)
|
|
#define IXP425_EXP_BUS_CS6_HWBASE IXP425_EXP_BUS_CSx_HWBASE(6)
|
|
#define IXP425_EXP_BUS_CS7_HWBASE IXP425_EXP_BUS_CSx_HWBASE(7)
|
|
|
|
/*
|
|
* IXP435/Gateworks Cambria
|
|
*/
|
|
#define IXP435_USB1_HWBASE 0xCD000000UL /* USB host controller 1 */
|
|
#define IXP435_USB1_VBASE 0xF001C000UL
|
|
#define IXP435_USB1_SIZE 0x1000 /* NB: only uses 0x300 */
|
|
|
|
#define IXP435_USB2_HWBASE 0xCE000000UL /* USB host controller 2 */
|
|
#define IXP435_USB2_VBASE 0xF001D000UL
|
|
#define IXP435_USB2_SIZE 0x1000 /* NB: only uses 0x300 */
|
|
|
|
#define CAMBRIA_GPS_HWBASE 0x53FC0000UL /* optional GPS Serial Port */
|
|
#define CAMBRIA_GPS_VBASE 0xF001E000UL
|
|
#define CAMBRIA_GPS_SIZE 0x1000
|
|
#define CAMBRIA_RS485_HWBASE 0x53F80000UL /* optional RS485 Serial Port */
|
|
#define CAMBRIA_RS485_VBASE 0xF001F000UL
|
|
#define CAMBRIA_RS485_SIZE 0x1000
|
|
|
|
/* NB: these are mapped on the fly, so no fixed virtual addresses */
|
|
#define CAMBRIA_OCTAL_LED_HWBASE 0x53F40000UL /* Octal Status LED Latch */
|
|
#define CAMBRIA_OCTAL_LED_SIZE 0x1000
|
|
#define CAMBRIA_CFSEL1_HWBASE 0x53E40000UL /* Compact Flash Socket Sel 0 */
|
|
#define CAMBRIA_CFSEL1_SIZE 0x40000
|
|
#define CAMBRIA_CFSEL0_HWBASE 0x53E00000UL /* Compact Flash Socket Sel 1 */
|
|
#define CAMBRIA_CFSEL0_SIZE 0x40000
|
|
|
|
#endif /* _IXP425REG_H_ */
|