mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-20 11:11:24 +00:00
e4e7b5bc54
obtained from o2micro. These should only be needed for 'older' o2micro bridges (anything before the 7xxx series of bridges), but will work with the new bridges. # I don't plan on porting it to oldcard, but will happily commit to # oldcard if someone else needs them.
447 lines
16 KiB
C
447 lines
16 KiB
C
/* $NetBSD: i82365reg.h,v 1.3 1998/12/20 17:53:28 nathanw Exp $ */
|
|
/* $FreeBSD$ */
|
|
|
|
/*
|
|
* Copyright (c) 2002 M Warner Losh. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* This software may be derived from NetBSD i82365.c and other files with
|
|
* the following copyright:
|
|
*
|
|
* Copyright (c) 1997 Marc Horowitz. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Marc Horowitz.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _SYS_DEV_EXCA_EXCAREG_H
|
|
#define _SYS_DEV_EXCA_EXCAREG_H
|
|
|
|
/*
|
|
* All information is from the intel 82365sl PC Card Interface Controller
|
|
* (PCIC) data sheet, marked "preliminary". Order number 290423-002, January
|
|
* 1993.
|
|
*/
|
|
|
|
#define EXCA_IOSIZE 2
|
|
|
|
#define EXCA_REG_INDEX 0
|
|
#define EXCA_REG_DATA 1
|
|
|
|
#define EXCA_NSLOTS 4 /* 2 in 2 chips */
|
|
|
|
/*
|
|
* I/o ports
|
|
*/
|
|
#define EXCA_INDEX0 0x3e0
|
|
|
|
/*
|
|
* The PCIC allows two chips to share the same address. In order not to run
|
|
* afoul of the bsd device model, this driver will treat those chips as
|
|
* the same device.
|
|
*/
|
|
|
|
#define EXCA_CHIP0_BASE 0x00
|
|
#define EXCA_CHIP1_BASE 0x80
|
|
|
|
/* Each PCIC chip can drive two sockets */
|
|
|
|
#define EXCA_SOCKET_SIZE 0x40
|
|
#define EXCA_SOCKETA_INDEX 0x00
|
|
#define EXCA_SOCKETB_INDEX EXCA_SOCKET_SIZE
|
|
|
|
/* general setup registers */
|
|
|
|
#define EXCA_IDENT 0x00 /* RO */
|
|
#define EXCA_IDENT_IFTYPE_MASK 0xC0
|
|
#define EXCA_IDENT_IFTYPE_IO_ONLY 0x00
|
|
#define EXCA_IDENT_IFTYPE_MEM_ONLY 0x40
|
|
#define EXCA_IDENT_IFTYPE_MEM_AND_IO 0x80
|
|
#define EXCA_IDENT_IFTYPE_RESERVED 0xC0
|
|
#define EXCA_IDENT_ZERO 0x30
|
|
#define EXCA_IDENT_REV_MASK 0x0F
|
|
#define EXCA_IDENT_REV_I82365SLR0 0x02 /* step a/b */
|
|
#define EXCA_IDENT_REV_I82365SLR1 0x03 /* step c */
|
|
#define EXCA_IDENT_REV_I82365SLDF 0x04 /* step df */
|
|
#define EXCA_IDENT_REV_IBM1 0x08 /* ibm clone */
|
|
#define EXCA_IDENT_REV_IBM2 0x09 /* ibm clone */
|
|
#define EXCA_IDENT_REV_IBM_KING 0x0a /* ibm king */
|
|
|
|
#define EXCA_IF_STATUS 0x01 /* RO */
|
|
#define EXCA_IF_STATUS_GPI 0x80 /* General Purpose Input */
|
|
#define EXCA_IF_STATUS_POWERACTIVE 0x40
|
|
#define EXCA_IF_STATUS_READY 0x20 /* really READY/!BUSY */
|
|
#define EXCA_IF_STATUS_MEM_WP 0x10
|
|
#define EXCA_IF_STATUS_CARDDETECT_MASK 0x0C
|
|
#define EXCA_IF_STATUS_CARDDETECT_PRESENT 0x0C
|
|
#define EXCA_IF_STATUS_BATTERY_MASK 0x03
|
|
#define EXCA_IF_STATUS_BATTERY_DEAD1 0x00
|
|
#define EXCA_IF_STATUS_BATTERY_DEAD2 0x01
|
|
#define EXCA_IF_STATUS_BATTERY_WARNING 0x02
|
|
#define EXCA_IF_STATUS_BATTERY_GOOD 0x03
|
|
|
|
#define EXCA_PWRCTL 0x02 /* RW */
|
|
#define EXCA_PWRCTL_OE 0x80 /* output enable */
|
|
#define EXCA_PWRCTL_DISABLE_RESETDRV 0x40
|
|
#define EXCA_PWRCTL_AUTOSWITCH_ENABLE 0x20
|
|
#define EXCA_PWRCTL_PWR_ENABLE 0x10
|
|
#define EXCA_PWRCTL_VPP2_MASK 0x0C
|
|
/* XXX these are a little unclear from the data sheet */
|
|
#define EXCA_PWRCTL_VPP2_RESERVED 0x0C
|
|
#define EXCA_PWRCTL_VPP2_EN1 0x08
|
|
#define EXCA_PWRCTL_VPP2_EN0 0x04
|
|
#define EXCA_PWRCTL_VPP2_ENX 0x00
|
|
#define EXCA_PWRCTL_VPP1_MASK 0x03
|
|
/* XXX these are a little unclear from the data sheet */
|
|
#define EXCA_PWRCTL_VPP1_RESERVED 0x03
|
|
#define EXCA_PWRCTL_VPP1_EN1 0x02
|
|
#define EXCA_PWRCTL_VPP1_EN0 0x01
|
|
#define EXCA_PWRCTL_VPP1_ENX 0x00
|
|
|
|
#define EXCA_CSC 0x04 /* RW */
|
|
#define EXCA_CSC_ZERO 0xE0
|
|
#define EXCA_CSC_GPI 0x10
|
|
#define EXCA_CSC_CD 0x08 /* Card Detect Change */
|
|
#define EXCA_CSC_READY 0x04
|
|
#define EXCA_CSC_BATTWARN 0x02
|
|
#define EXCA_CSC_BATTDEAD 0x01 /* for memory cards */
|
|
#define EXCA_CSC_RI 0x01 /* for i/o cards */
|
|
|
|
#define EXCA_ADDRWIN_ENABLE 0x06 /* RW */
|
|
#define EXCA_ADDRWIN_ENABLE_IO1 0x80
|
|
#define EXCA_ADDRWIN_ENABLE_IO0 0x40
|
|
#define EXCA_ADDRWIN_ENABLE_MEMCS16 0x20 /* rtfds if you care */
|
|
#define EXCA_ADDRWIN_ENABLE_MEM4 0x10
|
|
#define EXCA_ADDRWIN_ENABLE_MEM3 0x08
|
|
#define EXCA_ADDRWIN_ENABLE_MEM2 0x04
|
|
#define EXCA_ADDRWIN_ENABLE_MEM1 0x02
|
|
#define EXCA_ADDRWIN_ENABLE_MEM0 0x01
|
|
|
|
#define EXCA_CARD_DETECT 0x16 /* RW */
|
|
#define EXCA_CARD_DETECT_RESERVED 0xC0
|
|
#define EXCA_CARD_DETECT_SW_INTR 0x20
|
|
#define EXCA_CARD_DETECT_RESUME_ENABLE 0x10
|
|
#define EXCA_CARD_DETECT_GPI_TRANSCTL 0x08
|
|
#define EXCA_CARD_DETECT_GPI_ENABLE 0x04
|
|
#define EXCA_CARD_DETECT_CFGRST_ENABLE 0x02
|
|
#define EXCA_CARD_DETECT_MEMDLY_INHIBIT 0x01
|
|
|
|
/* interrupt registers */
|
|
|
|
#define EXCA_INTR 0x03 /* RW */
|
|
#define EXCA_INTR_RI_ENABLE 0x80
|
|
#define EXCA_INTR_RESET 0x40 /* active low (zero) */
|
|
#define EXCA_INTR_CARDTYPE_MASK 0x20
|
|
#define EXCA_INTR_CARDTYPE_IO 0x20
|
|
#define EXCA_INTR_CARDTYPE_MEM 0x00
|
|
#define EXCA_INTR_ENABLE 0x10
|
|
#define EXCA_INTR_IRQ_MASK 0x0F
|
|
#define EXCA_INTR_IRQ_SHIFT 0
|
|
#define EXCA_INTR_IRQ_NONE 0x00
|
|
#define EXCA_INTR_IRQ_RESERVED1 0x01
|
|
#define EXCA_INTR_IRQ_RESERVED2 0x02
|
|
#define EXCA_INTR_IRQ3 0x03
|
|
#define EXCA_INTR_IRQ4 0x04
|
|
#define EXCA_INTR_IRQ5 0x05
|
|
#define EXCA_INTR_IRQ_RESERVED6 0x06
|
|
#define EXCA_INTR_IRQ7 0x07
|
|
#define EXCA_INTR_IRQ_RESERVED8 0x08
|
|
#define EXCA_INTR_IRQ9 0x09
|
|
#define EXCA_INTR_IRQ10 0x0A
|
|
#define EXCA_INTR_IRQ11 0x0B
|
|
#define EXCA_INTR_IRQ12 0x0C
|
|
#define EXCA_INTR_IRQ_RESERVED13 0x0D
|
|
#define EXCA_INTR_IRQ14 0x0E
|
|
#define EXCA_INTR_IRQ15 0x0F
|
|
|
|
#define EXCA_INTR_IRQ_VALIDMASK 0xDEB8 /* 1101 1110 1011 1000 */
|
|
|
|
#define EXCA_CSC_INTR 0x05 /* RW */
|
|
#define EXCA_CSC_INTR_IRQ_MASK 0xF0
|
|
#define EXCA_CSC_INTR_IRQ_SHIFT 4
|
|
#define EXCA_CSC_INTR_IRQ_NONE 0x00
|
|
#define EXCA_CSC_INTR_IRQ_RESERVED1 0x10
|
|
#define EXCA_CSC_INTR_IRQ_RESERVED2 0x20
|
|
#define EXCA_CSC_INTR_IRQ3 0x30
|
|
#define EXCA_CSC_INTR_IRQ4 0x40
|
|
#define EXCA_CSC_INTR_IRQ5 0x50
|
|
#define EXCA_CSC_INTR_IRQ_RESERVED6 0x60
|
|
#define EXCA_CSC_INTR_IRQ7 0x70
|
|
#define EXCA_CSC_INTR_IRQ_RESERVED8 0x80
|
|
#define EXCA_CSC_INTR_IRQ9 0x90
|
|
#define EXCA_CSC_INTR_IRQ10 0xA0
|
|
#define EXCA_CSC_INTR_IRQ11 0xB0
|
|
#define EXCA_CSC_INTR_IRQ12 0xC0
|
|
#define EXCA_CSC_INTR_IRQ_RESERVED13 0xD0
|
|
#define EXCA_CSC_INTR_IRQ14 0xE0
|
|
#define EXCA_CSC_INTR_IRQ15 0xF0
|
|
#define EXCA_CSC_INTR_CD_ENABLE 0x08
|
|
#define EXCA_CSC_INTR_READY_ENABLE 0x04
|
|
#define EXCA_CSC_INTR_BATTWARN_ENABLE 0x02
|
|
#define EXCA_CSC_INTR_BATTDEAD_ENABLE 0x01 /* for memory cards */
|
|
#define EXCA_CSC_INTR_RI_ENABLE 0x01 /* for I/O cards */
|
|
|
|
#define EXCA_CSC_INTR_IRQ_VALIDMASK 0xDEB8 /* 1101 1110 1011 1000 */
|
|
|
|
/* I/O registers */
|
|
|
|
#define EXCA_IO_WINS 2
|
|
|
|
#define EXCA_IOCTL 0x07 /* RW */
|
|
#define EXCA_IOCTL_IO1_WAITSTATE 0x80
|
|
#define EXCA_IOCTL_IO1_ZEROWAIT 0x40
|
|
#define EXCA_IOCTL_IO1_IOCS16SRC_MASK 0x20
|
|
#define EXCA_IOCTL_IO1_IOCS16SRC_CARD 0x20
|
|
#define EXCA_IOCTL_IO1_IOCS16SRC_DATASIZE 0x00
|
|
#define EXCA_IOCTL_IO1_DATASIZE_MASK 0x10
|
|
#define EXCA_IOCTL_IO1_DATASIZE_16BIT 0x10
|
|
#define EXCA_IOCTL_IO1_DATASIZE_8BIT 0x00
|
|
#define EXCA_IOCTL_IO0_WAITSTATE 0x08
|
|
#define EXCA_IOCTL_IO0_ZEROWAIT 0x04
|
|
#define EXCA_IOCTL_IO0_IOCS16SRC_MASK 0x02
|
|
#define EXCA_IOCTL_IO0_IOCS16SRC_CARD 0x02
|
|
#define EXCA_IOCTL_IO0_IOCS16SRC_DATASIZE 0x00
|
|
#define EXCA_IOCTL_IO0_DATASIZE_MASK 0x01
|
|
#define EXCA_IOCTL_IO0_DATASIZE_16BIT 0x01
|
|
#define EXCA_IOCTL_IO0_DATASIZE_8BIT 0x00
|
|
|
|
#define EXCA_IOADDR0_START_LSB 0x08
|
|
#define EXCA_IOADDR0_START_MSB 0x09
|
|
#define EXCA_IOADDR0_STOP_LSB 0x0A
|
|
#define EXCA_IOADDR0_STOP_MSB 0x0B
|
|
#define EXCA_IOADDR1_START_LSB 0x0C
|
|
#define EXCA_IOADDR1_START_MSB 0x0D
|
|
#define EXCA_IOADDR1_STOP_LSB 0x0E
|
|
#define EXCA_IOADDR1_STOP_MSB 0x0F
|
|
|
|
/* memory registers */
|
|
|
|
/*
|
|
* memory window addresses refer to bits A23-A12 of the ISA system memory
|
|
* address. This is a shift of 12 bits. The LSB contains A19-A12, and the
|
|
* MSB contains A23-A20, plus some other bits.
|
|
*/
|
|
|
|
#define EXCA_MEM_WINS 5
|
|
|
|
#define EXCA_MEM_SHIFT 12
|
|
#define EXCA_MEM_PAGESIZE (1<<EXCA_MEM_SHIFT)
|
|
|
|
#define EXCA_SYSMEM_ADDRX_SHIFT EXCA_MEM_SHIFT
|
|
#define EXCA_SYSMEM_ADDRX_START_MSB_DATASIZE_MASK 0x80
|
|
#define EXCA_SYSMEM_ADDRX_START_MSB_DATASIZE_16BIT 0x80
|
|
#define EXCA_SYSMEM_ADDRX_START_MSB_DATASIZE_8BIT 0x00
|
|
#define EXCA_SYSMEM_ADDRX_START_MSB_ZEROWAIT 0x40
|
|
#define EXCA_SYSMEM_ADDRX_START_MSB_SCRATCH_MASK 0x30
|
|
#define EXCA_SYSMEM_ADDRX_START_MSB_ADDR_MASK 0x0F
|
|
|
|
#define EXCA_SYSMEM_ADDRX_STOP_MSB_WAIT_MASK 0xC0
|
|
#define EXCA_SYSMEM_ADDRX_STOP_MSB_WAIT0 0x00
|
|
#define EXCA_SYSMEM_ADDRX_STOP_MSB_WAIT1 0x40
|
|
#define EXCA_SYSMEM_ADDRX_STOP_MSB_WAIT2 0x80
|
|
#define EXCA_SYSMEM_ADDRX_STOP_MSB_WAIT3 0xC0
|
|
#define EXCA_SYSMEM_ADDRX_STOP_MSB_ADDR_MASK 0x0F
|
|
|
|
/*
|
|
* The card side of a memory mapping consists of bits A19-A12 of the card
|
|
* memory address in the LSB, and A25-A20 plus some other bits in the MSB.
|
|
* Again, the shift is 12 bits.
|
|
*/
|
|
|
|
#define EXCA_CARDMEM_ADDRX_SHIFT EXCA_MEM_SHIFT
|
|
#define EXCA_CARDMEM_ADDRX_MSB_WP 0x80
|
|
#define EXCA_CARDMEM_ADDRX_MSB_REGACTIVE_MASK 0x40
|
|
#define EXCA_CARDMEM_ADDRX_MSB_REGACTIVE_ATTR 0x40
|
|
#define EXCA_CARDMEM_ADDRX_MSB_REGACTIVE_COMMON 0x00
|
|
#define EXCA_CARDMEM_ADDRX_MSB_ADDR_MASK 0x3F
|
|
|
|
#define EXCA_SYSMEM_ADDR0_START_LSB 0x10
|
|
#define EXCA_SYSMEM_ADDR0_START_MSB 0x11
|
|
#define EXCA_SYSMEM_ADDR0_STOP_LSB 0x12
|
|
#define EXCA_SYSMEM_ADDR0_STOP_MSB 0x13
|
|
|
|
#define EXCA_CARDMEM_ADDR0_LSB 0x14
|
|
#define EXCA_CARDMEM_ADDR0_MSB 0x15
|
|
|
|
/* #define EXCA_RESERVED 0x17 */
|
|
|
|
#define EXCA_SYSMEM_ADDR1_START_LSB 0x18
|
|
#define EXCA_SYSMEM_ADDR1_START_MSB 0x19
|
|
#define EXCA_SYSMEM_ADDR1_STOP_LSB 0x1A
|
|
#define EXCA_SYSMEM_ADDR1_STOP_MSB 0x1B
|
|
|
|
#define EXCA_CARDMEM_ADDR1_LSB 0x1C
|
|
#define EXCA_CARDMEM_ADDR1_MSB 0x1D
|
|
|
|
#define EXCA_SYSMEM_ADDR2_START_LSB 0x20
|
|
#define EXCA_SYSMEM_ADDR2_START_MSB 0x21
|
|
#define EXCA_SYSMEM_ADDR2_STOP_LSB 0x22
|
|
#define EXCA_SYSMEM_ADDR2_STOP_MSB 0x23
|
|
|
|
#define EXCA_CARDMEM_ADDR2_LSB 0x24
|
|
#define EXCA_CARDMEM_ADDR2_MSB 0x25
|
|
|
|
/* #define EXCA_RESERVED 0x26 */
|
|
/* #define EXCA_RESERVED 0x27 */
|
|
|
|
#define EXCA_SYSMEM_ADDR3_START_LSB 0x28
|
|
#define EXCA_SYSMEM_ADDR3_START_MSB 0x29
|
|
#define EXCA_SYSMEM_ADDR3_STOP_LSB 0x2A
|
|
#define EXCA_SYSMEM_ADDR3_STOP_MSB 0x2B
|
|
|
|
#define EXCA_CARDMEM_ADDR3_LSB 0x2C
|
|
#define EXCA_CARDMEM_ADDR3_MSB 0x2D
|
|
|
|
/* #define EXCA_RESERVED 0x2E */
|
|
/* #define EXCA_RESERVED 0x2F */
|
|
|
|
#define EXCA_SYSMEM_ADDR4_START_LSB 0x30
|
|
#define EXCA_SYSMEM_ADDR4_START_MSB 0x31
|
|
#define EXCA_SYSMEM_ADDR4_STOP_LSB 0x32
|
|
#define EXCA_SYSMEM_ADDR4_STOP_MSB 0x33
|
|
|
|
#define EXCA_CARDMEM_ADDR4_LSB 0x34
|
|
#define EXCA_CARDMEM_ADDR4_MSB 0x35
|
|
|
|
/* #define EXCA_RESERVED 0x36 */
|
|
/* #define EXCA_RESERVED 0x37 */
|
|
/* #define EXCA_RESERVED 0x38 */
|
|
/* #define EXCA_RESERVED 0x39 */
|
|
/* #define EXCA_RESERVED 0x3A */
|
|
/* #define EXCA_RESERVED 0x3B */
|
|
/* #define EXCA_RESERVED 0x3C */
|
|
/* #define EXCA_RESERVED 0x3D */
|
|
/* #define EXCA_RESERVED 0x3E */
|
|
/* #define EXCA_RESERVED 0x3F */
|
|
|
|
/* cardbus extensions - memory window page registers */
|
|
|
|
#define EXCA_MEMREG_WIN_SHIFT 24
|
|
#define EXCA_SYSMEM_ADDR0_WIN 0x40
|
|
#define EXCA_SYSMEM_ADDR1_WIN 0x41
|
|
#define EXCA_SYSMEM_ADDR2_WIN 0x42
|
|
#define EXCA_SYSMEM_ADDR3_WIN 0x43
|
|
#define EXCA_SYSMEM_ADDR4_WIN 0x44
|
|
|
|
/* vendor-specific registers */
|
|
|
|
#define EXCA_INTEL_GLOBAL_CTL 0x1E /* RW */
|
|
#define EXCA_INTEL_GLOBAL_CTL_RESERVED 0xF0
|
|
#define EXCA_INTEL_GLOBAL_CTL_IRQ14PULSE_ENABLE 0x08
|
|
#define EXCA_INTEL_GLOBAL_CTL_EXPLICIT_CSC_ACK 0x04
|
|
#define EXCA_INTEL_GLOBAL_CTL_IRQLEVEL_ENABLE 0x02
|
|
#define EXCA_INTEL_GLOBAL_CTL_POWERDOWN 0x01
|
|
|
|
#define EXCA_CIRRUS_MISC_CTL_2 0x1E
|
|
#define EXCA_CIRRUS_MISC_CTL_2_SUSPEND 0x04
|
|
|
|
#define EXCA_CIRRUS_CHIP_INFO 0x1F
|
|
#define EXCA_CIRRUS_CHIP_INFO_CHIP_ID 0xC0
|
|
#define EXCA_CIRRUS_CHIP_INFO_SLOTS 0x20
|
|
#define EXCA_CIRRUS_CHIP_INFO_REV 0x1F
|
|
|
|
#define EXCA_CIRRUS_EXTENDED_INDEX 0x2E
|
|
#define EXCA_CIRRUS_EXTENDED_DATA 0x2F
|
|
#define EXCA_CIRRUS_EXT_CONTROL_1 0x03
|
|
#define EXCA_CIRRUS_EXT_CONTROL_1_PCI_INTR_MASK 0x18
|
|
|
|
#define EXCA_VADEM_VMISC 0x3a
|
|
#define EXCA_VADEM_REV 0x40
|
|
#define EXCA_VADEM_COOKIE1 0x0E
|
|
#define EXCA_VADEM_COOKIE2 0x37
|
|
|
|
#define EXCA_RICOH_ID 0x3a
|
|
#define EXCA_RID_296 0x32
|
|
#define EXCA_RID_396 0xb2
|
|
|
|
/*
|
|
* o2 micro specific registers
|
|
*/
|
|
#define EXCA_O2MICRO_CTRL_C 0x3a
|
|
#define EXCA_O2CC_IREQ_INTC 0x80
|
|
#define EXCA_O2CC_STSCHG_INTC 0x20
|
|
|
|
/* Plug and play */
|
|
#define EXCA_PNP_ACTIONTEC 0x1802A904 /* AEI0218 */
|
|
#define EXCA_PNP_IBM3765 0x65374d24 /* IBM3765 */
|
|
#define EXCA_PNP_82365 0x000ED041 /* PNP0E00 */
|
|
#define EXCA_PNP_CL_PD6720 0x010ED041 /* PNP0E01 */
|
|
#define EXCA_PNP_VLSI_82C146 0x020ED041 /* PNP0E02 */
|
|
#define EXCA_PNP_82365_CARDBUS 0x030ED041 /* PNP0E03 */
|
|
#define EXCA_PNP_SCM_SWAPBOX 0x69046d4c /* SMC0469 */
|
|
|
|
/* C-Bus PnP Definitions */
|
|
#define EXCA_NEC_PC9801_102 0x9180a3b8 /* NEC8091 PC-9801-102 */
|
|
#define EXCA_NEC_PC9821RA_E01 0x2181a3b8 /* NEC8121 PC-9821RA-E01 */
|
|
|
|
/*
|
|
* Mask of allowable interrupts.
|
|
*
|
|
* For IBM-AT machines, irqs 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 are
|
|
* allowed. Nearly all IBM-AT machines with pcic cards or bridges
|
|
* wire these interrupts (or a subset thereof) to the corresponding
|
|
* pins on the ISA bus. Some older laptops are reported to not route
|
|
* all the interrupt pins to the bus because the designers knew that
|
|
* some would conflict with builtin devices. Older versions of Windows
|
|
* NT had a special device that would probe for conflicts early in the
|
|
* boot process and formulate a mapping table. Maybe we should do
|
|
* something similar.
|
|
*
|
|
* For NEC PC-98 machines, irq 3, 5, 6, 9, 10, 11, 12, 13 are allowed.
|
|
* These correspond to the C-BUS signals INT 0, 1, 2, 3, 41, 42, 5, 6
|
|
* respectively.
|
|
*
|
|
* Hiroshi TSUKADA-san writes in FreeBSD98-testers that CBUS INT 2
|
|
* (mapped to IRQ 6) is routed to the IRQ 7 pin of the pcic in pc98
|
|
* cbus add-in cards. He has confirmed this routing with a visual
|
|
* inspection of his card or a VOM.
|
|
*/
|
|
#ifdef PC98
|
|
#define EXCA_INT_MASK_ALLOWED 0x3E68 /* PC98 */
|
|
#else
|
|
#define EXCA_INT_MASK_ALLOWED 0xDEB8 /* AT */
|
|
#endif
|
|
|
|
#endif /* !_SYS_DEV_EXCA_EXCAREG_H */
|