Ian Lepore 05ca38474e Use explicit initializer style, fill in missing functions.		2015-01-21 03:28:07 +00:00
..
at91_aic.c	Unify interrupts bit definition and usage. While here remove PSR_C_bit.	2014-09-10 15:25:15 +00:00
at91_aicreg.h
at91_cfata.c
at91_common.c	Remove keyboard entropy [1] from r270105.	2014-08-17 18:27:02 +00:00
at91_gpio.h	Provide a simplified way to specify GPIO pins for the Atmel port.	2014-01-15 19:49:12 +00:00
at91_machdep.c	Eliminate a redundant declaration.	2014-12-21 21:23:53 +00:00
at91_mci.c	Make note about reset vs RTOE actions...	2014-08-18 21:04:35 +00:00
at91_mcireg.h	Print the symbolic bit names for the status when we get a timeout.	2014-08-14 23:17:33 +00:00
at91_pdcreg.h
at91_pinctrl.c	Convert the at91_pinctrl driver to use the new fdt_pinctrl interface.	2014-09-13 19:59:16 +00:00
at91_pio_sam9g20.h
at91_pio_sam9g45.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91_pio.c	Implement the FDT static pinctl/pinmux spec for Atmel. This will	2014-08-15 16:08:52 +00:00
at91_pioreg.h	Add definitions for the additional PIO pins found on recent AT91 SoCs.	2013-12-02 02:33:03 +00:00
at91_piovar.h	Implement the FDT static pinctl/pinmux spec for Atmel. This will	2014-08-15 16:08:52 +00:00
at91_pit.c	Add support for multipass to Atmel, for both FDT and !FDT cases.	2014-08-14 04:21:25 +00:00
at91_pitreg.h	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pmc.c	Add support for multipass to Atmel, for both FDT and !FDT cases.	2014-08-14 04:21:25 +00:00
at91_pmcreg.h	Add charge pump current register.	2012-08-10 04:47:20 +00:00
at91_pmcvar.h	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91_reset.S	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91_rst.c	Add FDT attachment. Flag lost functionality with FDT_HACKS so we can	2014-02-09 20:59:46 +00:00
at91_rstreg.h	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rtc.c	Loop reading the RTC registers until the same values are obtained	2012-10-07 20:36:46 +00:00
at91_rtcreg.h	Use the RTC unit to get the time. This works on all known AT91SAM9*	2012-10-07 01:58:32 +00:00
at91_sdramc.c	Add device node for SDRAMC device. Currently just claims device's	2014-02-28 02:59:51 +00:00
at91_shdwc.c	shdwc device for fdt	2014-02-28 03:00:25 +00:00
at91_smc.c	Add standard memory controller helper functions.	2014-01-19 17:45:13 +00:00
at91_smc.h	Add standard memory controller helper functions.	2014-01-19 17:45:13 +00:00
at91_spi.c	Honor the disabled status by only grabbing resources and returning	2014-02-13 16:50:08 +00:00
at91_spireg.h
at91_ssc.c
at91_sscreg.h
at91_st.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_streg.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_tcb.c	tcb device for fdt	2014-02-28 03:00:28 +00:00
at91_twi.c	Honor the disabled status by only grabbing resources and returning	2014-02-13 16:50:08 +00:00
at91_twiio.h
at91_twireg.h
at91_usartreg.h
at91_wdt.c	FDT attachment...	2014-02-09 21:01:53 +00:00
at91_wdtreg.h
at91.c	Use explicit initializer style, fill in missing functions.	2015-01-21 03:28:07 +00:00
at91board.h
at91reg.h	The system IRQ is always IRQ 1. Make it so.	2012-07-10 02:39:03 +00:00
at91rm92reg.h	Fix typos.	2014-09-26 09:07:02 +00:00
at91rm9200_devices.c	Fix a typo: the RXD0 pin is PA18, not PA19.	2013-03-29 18:06:54 +00:00
at91rm9200.c	Remove a bogus AIC.	2014-09-27 02:15:45 +00:00
at91rm9200var.h	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
at91sam9g20.c	Move AIC related stuff to own file.	2014-03-08 06:06:50 +00:00
at91sam9g20reg.h	Fix typos.	2014-09-26 09:07:02 +00:00
at91sam9g45.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9g45reg.h	Fix the definitioin of AT91SAM9G45_IRQ_PIOE and rename it to	2014-09-27 14:39:00 +00:00
at91sam9x5.c	Move AIC related stuff to own file.	2014-03-08 06:06:50 +00:00
at91sam9x5reg.h	Fix typos.	2014-09-26 09:07:02 +00:00
at91sam9260.c	Add AIC to at91sam9260 support, now that it is needed for multipass to	2014-08-14 04:21:31 +00:00
at91sam9260reg.h	Fix the size of AT91SAM9260_PIT_SIZE.	2014-09-26 09:08:09 +00:00
at91soc.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91soc.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91var.h	Make at91_soc_id() public.	2014-03-08 05:03:56 +00:00
board_bwct.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_eb9200.c	Fix board ID too...	2014-02-13 15:47:41 +00:00
board_ethernut5.c	uboot should be telling us it is an ETHERNUT5 for this board. Tag it	2012-07-14 06:00:37 +00:00
board_hl200.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_hl201.c	Connect NAND for the SAM9260EK eval board, as well as the HotE HL-201.	2014-01-19 17:59:34 +00:00
board_kb920x.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_qila9g20.c
board_sam9g20ek.c
board_sam9x25ek.c
board_sam9260ek.c	Fix gcc with -Wstrict-prototypes by telling it bi_emac takes no parameters.	2014-01-25 19:36:27 +00:00
board_sn9g45.c	Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.	2012-07-27 16:38:02 +00:00
board_tsc4370.c	Remove extra semicolons.	2014-06-06 16:37:42 +00:00
files.at91	Use explicit initializer style, fill in missing functions.	2015-01-21 03:28:07 +00:00
if_ate.c	Mechanically convert to if_inc_counter().	2014-09-19 09:20:16 +00:00
if_atereg.h
if_macb.c	Mechanically convert to if_inc_counter().	2014-09-19 09:20:16 +00:00
if_macbreg.h
if_macbvar.h	Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this	2013-11-30 22:17:27 +00:00
std.at91	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9g45	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.atmel	Remove the ARM_DEVICE_MULTIPASS option and make its effect be the default.	2014-10-26 18:30:35 +00:00
std.bwct	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.eb9200	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.ethernut5	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.hl200	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.hl201	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.kb920x	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.qila9g20	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.sam9g20ek	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.sam9x25ek	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.sam9260ek	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.sn9g45	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
std.tsc4370	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00
uart_bus_at91usart.c	Remove redundant declaration for uart devclass.	2014-01-24 16:50:15 +00:00
uart_cpu_at91usart.c	Remove redundant declaration for uart devclass.	2014-01-24 16:50:15 +00:00
uart_dev_at91usart.c	Style(9) nit: Use tab here.	2014-02-27 08:19:19 +00:00