mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-25 11:37:56 +00:00
ce4946daa5
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000 copper PHY. There are a whole bunch of very low cost cards available with this chipset selling for $150USD or less. This includes the SMC9462TX, D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards from Addtron. This chip supports TCP/IP checksum offload, VLAN tagging/insertion. 2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs. I have not done serious performance testing with this driver. I know it works, and I want it under CVS control so I can keep tabs on it. Note that there's no serious mutex stuff in here yet either: I need to talk more with jhb to figure out the right way to do this. That said, I don't think there will be any problems. This driver should also work on the alpha. It's not turned on in GENERIC.
169 lines
8.0 KiB
C
169 lines
8.0 KiB
C
/*
|
|
* Copyright (c) 2001 Wind River Systems
|
|
* Copyright (c) 2001
|
|
* Bill Paul <wpaul@bsdi.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _DEV_MII_NSGPHYREG_H_
|
|
#define _DEV_MII_NSGPHYREG_H_
|
|
|
|
/*
|
|
* NatSemi DP83891 registers
|
|
*/
|
|
|
|
#define NSGPHY_MII_BMCR 0x00
|
|
#define NSGPHY_BMCR_RESET 0x8000
|
|
#define NSGPHY_BMCR_LOOP 0x4000
|
|
#define NSGPHY_BMCR_SPD0 0x2000 /* speed select, lower bit */
|
|
#define NSGPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */
|
|
#define NSGPHY_BMCR_PDOWN 0x0800 /* Power down */
|
|
#define NSGPHY_BMCR_ISO 0x0400 /* Isolate */
|
|
#define NSGPHY_BMCR_STARTNEG 0x0200 /* Restart autoneg */
|
|
#define NSGPHY_BMCR_FDX 0x0100 /* Duplex mode */
|
|
#define NSGPHY_BMCR_CTEST 0x0080 /* Collision test enable */
|
|
#define NSGPHY_BMCR_SPD1 0x0040 /* Speed select, upper bit */
|
|
|
|
#define NSGPHY_S1000 NSGPHY_BMCR_SPD1 /* 1000mbps */
|
|
#define NSGPHY_S100 NSGPHY_BMCR_SPD0 /* 100mpbs */
|
|
#define NSGPHY_S10 0 /* 10mbps */
|
|
|
|
#define NSGPHY_MII_BMSR 0x01
|
|
#define NSGPHY_BMSR_100BT4 0x8000 /* 100baseT4 support */
|
|
#define NSGPHY_BMSR_100FDX 0x4000 /* 100baseTX full duplex */
|
|
#define NSGPHY_BMSR_100HDX 0x2000 /* 100baseTX half duplex */
|
|
#define NSGPHY_BMSR_10FDX 0x1000 /* 10baseT full duplex */
|
|
#define NSGPHY_BMSR_10HDX 0x0800 /* 10baseT half duplex */
|
|
#define NSGPHY_BMSR_100T2FDX 0x0400 /* 100baseT2 full duplex */
|
|
#define NSGPHY_BMSR_100T2HDX 0x0200 /* 100baseT2 full duplex */
|
|
#define NSGPHY_BMSR_EXTSTS 0x0100 /* 1000baseT Extended status present */
|
|
#define NSGPHY_BMSR_PRESUB 0x0040 /* Preamble surpression */
|
|
#define NSGPHY_BMSR_ACOMP 0x0020 /* Autoneg complete */
|
|
#define NSGPHY_BMSR_RFAULT 0x0010 /* Remote fault condition occured */
|
|
#define NSGPHY_BMSR_ANEG 0x0008 /* Autoneg capable */
|
|
#define NSGPHY_BMSR_LINK 0x0004 /* Link status */
|
|
#define NSGPHY_BMSR_JABBER 0x0002 /* Jabber detected */
|
|
#define NSGPHY_BMSR_EXT 0x0001 /* Extended capability */
|
|
|
|
#define NSGPHY_MII_ANAR 0x04
|
|
#define NSGPHY_ANAR_NP 0x8000 /* Next page */
|
|
#define NSGPHY_ANAR_RF 0x2000 /* Remote fault */
|
|
#define NSGPHY_ANAR_ASP 0x0800 /* Asymetric Pause */
|
|
#define NSGPHY_ANAR_PC 0x0400 /* Pause capable */
|
|
#define NSGPHY_ANAR_100T4 0x0200 /* 100baseT4 support */
|
|
#define NSGPHY_ANAR_100FDX 0x0100 /* 100baseTX full duplex support */
|
|
#define NSGPHY_ANAR_100HDX 0x0080 /* 100baseTX half duplex support */
|
|
#define NSGPHY_ANAR_10FDX 0x0040 /* 10baseT full duplex support */
|
|
#define NSGPHY_ANAR_10HDX 0x0020 /* 10baseT half duplex support */
|
|
#define NSGPHY_ANAR_SEL 0x001F /* selector field, 00001=Ethernet */
|
|
|
|
#define NSGPHY_MII_ANLPAR 0x05
|
|
#define NSGPHY_ANLPAR_NP 0x8000 /* Next page */
|
|
#define NSGPHY_ANLPAR_RF 0x2000 /* Remote fault */
|
|
#define NSGPHY_ANLPAR_ASP 0x0800 /* Asymetric Pause */
|
|
#define NSGPHY_ANLPAR_PC 0x0400 /* Pause capable */
|
|
#define NSGPHY_ANLPAR_100T4 0x0200 /* 100baseT4 support */
|
|
#define NSGPHY_ANLPAR_100FDX 0x0100 /* 100baseTX full duplex support */
|
|
#define NSGPHY_ANLPAR_100HDX 0x0080 /* 100baseTX half duplex support */
|
|
#define NSGPHY_ANLPAR_10FDX 0x0040 /* 10baseT full duplex support */
|
|
#define NSGPHY_ANLPAR_10HDX 0x0020 /* 10baseT half duplex support */
|
|
#define NSGPHY_ANLPAR_SEL 0x001F /* selector field, 00001=Ethernet */
|
|
|
|
#define NSGPHY_SEL_TYPE 0x0001 /* ethernet */
|
|
|
|
#define NSGPHY_MII_ANER 0x06
|
|
#define NSGPHY_ANER_PDF 0x0010 /* Parallel detection fault */
|
|
#define NSGPHY_ANER_LPNP 0x0008 /* Link partner can next page */
|
|
#define NSGPHY_ANER_NP 0x0004 /* Local PHY can next page */
|
|
#define NSGPHY_ANER_RX 0x0002 /* Next page received */
|
|
#define NSGPHY_ANER_LPAN 0x0001 /* Link partner autoneg capable */
|
|
|
|
#define NSGPHY_MII_NEXTP 0x07 /* Next page */
|
|
#define NSGPHY_NEXTP_NP 0x8000 /* Next page indication */
|
|
#define NSGPHY_NEXTP_MP 0x2000 /* Message page */
|
|
#define NSGPHY_NEXTP_ACK2 0x1000 /* Acknowledge 2 */
|
|
#define NSGPHY_NEXTP_TOGGLE 0x0800 /* Toggle */
|
|
#define NSGPHY_NEXTP_CODE 0x07FF /* Code field */
|
|
|
|
#define NSGPHY_MII_NEXTP_LP 0x08 /* Next page of link partner */
|
|
#define NSGPHY_NEXTPLP_NP 0x8000 /* Next page indication */
|
|
#define NSGPHY_NEXTPLP_MP 0x2000 /* Message page */
|
|
#define NSGPHY_NEXTPLP_ACK2 0x1000 /* Acknowledge 2 */
|
|
#define NSGPHY_NEXTPLP_TOGGLE 0x0800 /* Toggle */
|
|
#define NSGPHY_NEXTPLP_CODE 0x07FF /* Code field */
|
|
|
|
#define NSGPHY_MII_1000CTL 0x09 /* 1000baseT control */
|
|
#define NSGPHY_1000CTL_TST 0xE000 /* test modes */
|
|
#define NSGPHY_1000CTL_MSE 0x1000 /* Master/Slave config enable */
|
|
#define NSGPHY_1000CTL_MSC 0x0800 /* Master/Slave setting */
|
|
#define NSGPHY_1000CTL_RD 0x0400 /* Port type: Repeater/DTE */
|
|
#define NSGPHY_1000CTL_AFD 0x0200 /* Advertise full duplex */
|
|
#define NSGPHY_1000CTL_AHD 0x0100 /* Advertise half duplex */
|
|
|
|
#define NSGPHY_MII_1000STS 0x0A /* 1000baseT status */
|
|
#define NSGPHY_1000STS_MSF 0x8000 /* Master/slave fault */
|
|
#define NSGPHY_1000STS_MSR 0x4000 /* Master/slave result */
|
|
#define NSGPHY_1000STS_LRS 0x2000 /* Local receiver status */
|
|
#define NSGPHY_1000STS_RRS 0x1000 /* Remote receiver status */
|
|
#define NSGPHY_1000STS_LPFD 0x0800 /* Link partner can FD */
|
|
#define NSGPHY_1000STS_LPHD 0x0400 /* Link partner can HD */
|
|
#define NSGPHY_1000STS_ASM_DIR 0x0200 /* Asymetric pause capable */
|
|
#define NSGPHY_1000STS_IEC 0x00FF /* Idle error count */
|
|
|
|
#define NSGPHY_MII_EXTSTS 0x0F /* Extended status */
|
|
#define NSGPHY_EXTSTS_X_FD_CAP 0x8000 /* 1000base-X FD capable */
|
|
#define NSGPHY_EXTSTS_X_HD_CAP 0x4000 /* 1000base-X HD capable */
|
|
#define NSGPHY_EXTSTS_T_FD_CAP 0x2000 /* 1000base-T FD capable */
|
|
#define NSGPHY_EXTSTS_T_HD_CAP 0x1000 /* 1000base-T HD capable */
|
|
|
|
#define NSGPHY_MII_STRAPOPT 0x10 /* Strap options */
|
|
#define NSGPHY_STRAPOPT_PHYADDR 0xF800 /* PHY address */
|
|
#define NSGPHY_STRAPOPT_COMPAT 0x0400 /* Broadcom compat mode */
|
|
#define NSGPHY_STRAPOPT_MMSE 0x0200 /* Manual master/slave enable */
|
|
#define NSGPHY_STRAPOPT_ANEG 0x0100 /* Autoneg enable */
|
|
#define NSGPHY_STRAPOPT_MMSV 0x0080 /* Manual master/slave setting */
|
|
#define NSGPHY_STRAPOPT_1000HDX 0x0010 /* Advertise 1000 half-duplex */
|
|
#define NSGPHY_STRAPOPT_1000FDX 0x0008 /* Advertise 1000 full-duplex */
|
|
#define NSGPHY_STRAPOPT_100_ADV 0x0004 /* Advertise 100 full/half-duplex */
|
|
#define NSGPHY_STRAPOPT_SPDSEL 0x0003 /* speed selection */
|
|
|
|
#define NSGPHY_MII_PHYSUP 0x11 /* PHY support/current status */
|
|
#define NSGPHY_PHYSUP_SPDSTS 0x0018 /* speed status */
|
|
#define NSGPHY_PHYSUP_LNKSTS 0x0004 /* link status */
|
|
#define NSGPHY_PHYSUP_DUPSTS 0x0002 /* duplex status 1 == full */
|
|
#define NSGPHY_PHYSUP_10BT 0x0001 /* 10baseT resolved */
|
|
|
|
#define NSGPHY_SPDSTS_1000 0x0010
|
|
#define NSGPHY_SPDSTS_100 0x0008
|
|
#define NSGPHY_SPDSTS_10 0x0000
|
|
|
|
#endif /* _DEV_NSGPHY_MIIREG_H_ */
|