freebsd_amp_hwpstate/print-dhcp6.c

841 lines
19 KiB
C
Raw Normal View History

/*
* Copyright (C) 1998 and 1999 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* RFC3315: DHCPv6
* supported DHCPv6 options:
* RFC3319,
* RFC3633,
* RFC3646,
2007-10-16 02:20:42 +00:00
* RFC3898,
* RFC4075,
* RFC4242,
* RFC4280,
*/
#ifndef lint
static const char rcsid[] _U_ =
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
"@(#) $Header: /tcpdump/master/tcpdump/print-dhcp6.c,v 1.37 2008-02-06 10:26:09 guy Exp $";
#endif
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <tcpdump-stdinc.h>
#include <stdio.h>
#include <string.h>
#include "interface.h"
#include "addrtoname.h"
#include "extract.h"
/* lease duration */
#define DHCP6_DURATITION_INFINITE 0xffffffff
/* Error Values */
#define DH6ERR_FAILURE 16
#define DH6ERR_AUTHFAIL 17
#define DH6ERR_POORLYFORMED 18
#define DH6ERR_UNAVAIL 19
#define DH6ERR_OPTUNAVAIL 20
/* Message type */
#define DH6_SOLICIT 1
#define DH6_ADVERTISE 2
#define DH6_REQUEST 3
#define DH6_CONFIRM 4
#define DH6_RENEW 5
#define DH6_REBIND 6
#define DH6_REPLY 7
#define DH6_RELEASE 8
#define DH6_DECLINE 9
#define DH6_RECONFIGURE 10
#define DH6_INFORM_REQ 11
#define DH6_RELAY_FORW 12
#define DH6_RELAY_REPLY 13
2009-03-21 16:23:46 +00:00
#define DH6_LEASEQUERY 14
#define DH6_LQ_REPLY 15
/* DHCP6 base packet format */
struct dhcp6 {
union {
u_int8_t m;
u_int32_t x;
} dh6_msgtypexid;
/* options follow */
};
#define dh6_msgtype dh6_msgtypexid.m
#define dh6_xid dh6_msgtypexid.x
#define DH6_XIDMASK 0x00ffffff
/* DHCPv6 relay messages */
struct dhcp6_relay {
u_int8_t dh6relay_msgtype;
u_int8_t dh6relay_hcnt;
u_int8_t dh6relay_linkaddr[16]; /* XXX: badly aligned */
u_int8_t dh6relay_peeraddr[16];
/* options follow */
};
/* options */
#define DH6OPT_CLIENTID 1
#define DH6OPT_SERVERID 2
#define DH6OPT_IA_NA 3
2007-10-16 02:20:42 +00:00
#define DH6OPT_IA_TA 4
#define DH6OPT_IA_ADDR 5
#define DH6OPT_ORO 6
#define DH6OPT_PREFERENCE 7
# define DH6OPT_PREF_MAX 255
#define DH6OPT_ELAPSED_TIME 8
#define DH6OPT_RELAY_MSG 9
/*#define DH6OPT_SERVER_MSG 10 deprecated */
#define DH6OPT_AUTH 11
# define DH6OPT_AUTHPROTO_DELAYED 2
# define DH6OPT_AUTHPROTO_RECONFIG 3
# define DH6OPT_AUTHALG_HMACMD5 1
# define DH6OPT_AUTHRDM_MONOCOUNTER 0
# define DH6OPT_AUTHRECONFIG_KEY 1
# define DH6OPT_AUTHRECONFIG_HMACMD5 2
#define DH6OPT_UNICAST 12
#define DH6OPT_STATUS_CODE 13
# define DH6OPT_STCODE_SUCCESS 0
# define DH6OPT_STCODE_UNSPECFAIL 1
# define DH6OPT_STCODE_NOADDRAVAIL 2
# define DH6OPT_STCODE_NOBINDING 3
# define DH6OPT_STCODE_NOTONLINK 4
# define DH6OPT_STCODE_USEMULTICAST 5
# define DH6OPT_STCODE_NOPREFIXAVAIL 6
2009-03-21 16:23:46 +00:00
# define DH6OPT_STCODE_UNKNOWNQUERYTYPE 7
# define DH6OPT_STCODE_MALFORMEDQUERY 8
# define DH6OPT_STCODE_NOTCONFIGURED 9
# define DH6OPT_STCODE_NOTALLOWED 10
#define DH6OPT_RAPID_COMMIT 14
#define DH6OPT_USER_CLASS 15
#define DH6OPT_VENDOR_CLASS 16
#define DH6OPT_VENDOR_OPTS 17
#define DH6OPT_INTERFACE_ID 18
#define DH6OPT_RECONF_MSG 19
#define DH6OPT_RECONF_ACCEPT 20
#define DH6OPT_SIP_SERVER_D 21
#define DH6OPT_SIP_SERVER_A 22
#define DH6OPT_DNS 23
#define DH6OPT_DNSNAME 24
#define DH6OPT_IA_PD 25
#define DH6OPT_IA_PD_PREFIX 26
2007-10-16 02:20:42 +00:00
#define DH6OPT_NIS_SERVERS 27
#define DH6OPT_NISP_SERVERS 28
#define DH6OPT_NIS_NAME 29
#define DH6OPT_NISP_NAME 30
#define DH6OPT_NTP_SERVERS 31
#define DH6OPT_LIFETIME 32
#define DH6OPT_BCMCS_SERVER_D 33
#define DH6OPT_BCMCS_SERVER_A 34
#define DH6OPT_GEOCONF_CIVIC 36
#define DH6OPT_REMOTE_ID 37
#define DH6OPT_SUBSCRIBER_ID 38
#define DH6OPT_CLIENT_FQDN 39
2009-03-21 16:23:46 +00:00
#define DH6OPT_PANA_AGENT 40
#define DH6OPT_NEW_POSIX_TIMEZONE 41
#define DH6OPT_NEW_TZDB_TIMEZONE 42
#define DH6OPT_ERO 43
#define DH6OPT_LQ_QUERY 44
#define DH6OPT_CLIENT_DATA 45
#define DH6OPT_CLT_TIME 46
#define DH6OPT_LQ_RELAY_DATA 47
#define DH6OPT_LQ_CLIENT_LINK 48
struct dhcp6opt {
u_int16_t dh6opt_type;
u_int16_t dh6opt_len;
/* type-dependent data follows */
};
static const char *
dhcp6opt_name(int type)
{
static char genstr[sizeof("opt_65535") + 1]; /* XXX thread unsafe */
if (type > 65535)
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "INVALID-option";
switch(type) {
case DH6OPT_CLIENTID:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "client-ID";
case DH6OPT_SERVERID:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "server-ID";
case DH6OPT_IA_NA:
return "IA_NA";
2007-10-16 02:20:42 +00:00
case DH6OPT_IA_TA:
return "IA_TA";
case DH6OPT_IA_ADDR:
return "IA_ADDR";
case DH6OPT_ORO:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "option-request";
case DH6OPT_PREFERENCE:
return "preference";
case DH6OPT_ELAPSED_TIME:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "elapsed-time";
case DH6OPT_RELAY_MSG:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "relay-message";
case DH6OPT_AUTH:
return "authentication";
case DH6OPT_UNICAST:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "server-unicast";
case DH6OPT_STATUS_CODE:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "status-code";
case DH6OPT_RAPID_COMMIT:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "rapid-commit";
case DH6OPT_USER_CLASS:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "user-class";
case DH6OPT_VENDOR_CLASS:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "vendor-class";
case DH6OPT_VENDOR_OPTS:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "vendor-specific-info";
case DH6OPT_INTERFACE_ID:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "interface-ID";
case DH6OPT_RECONF_MSG:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "reconfigure-message";
case DH6OPT_RECONF_ACCEPT:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "reconfigure-accept";
case DH6OPT_SIP_SERVER_D:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "SIP-servers-domain";
case DH6OPT_SIP_SERVER_A:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "SIP-servers-address";
case DH6OPT_DNS:
2012-05-14 08:01:48 +00:00
return "DNS-server";
case DH6OPT_DNSNAME:
2012-05-14 08:01:48 +00:00
return "DNS-search-list";
case DH6OPT_IA_PD:
return "IA_PD";
case DH6OPT_IA_PD_PREFIX:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "IA_PD-prefix";
case DH6OPT_NTP_SERVERS:
2012-05-14 08:01:48 +00:00
return "NTP-server";
case DH6OPT_LIFETIME:
return "lifetime";
2007-10-16 02:20:42 +00:00
case DH6OPT_NIS_SERVERS:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "NIS-server";
2007-10-16 02:20:42 +00:00
case DH6OPT_NISP_SERVERS:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "NIS+-server";
2007-10-16 02:20:42 +00:00
case DH6OPT_NIS_NAME:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "NIS-domain-name";
2007-10-16 02:20:42 +00:00
case DH6OPT_NISP_NAME:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "NIS+-domain-name";
2007-10-16 02:20:42 +00:00
case DH6OPT_BCMCS_SERVER_D:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "BCMCS-domain-name";
2007-10-16 02:20:42 +00:00
case DH6OPT_BCMCS_SERVER_A:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "BCMCS-server";
2007-10-16 02:20:42 +00:00
case DH6OPT_GEOCONF_CIVIC:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "Geoconf-Civic";
2007-10-16 02:20:42 +00:00
case DH6OPT_REMOTE_ID:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "Remote-ID";
2007-10-16 02:20:42 +00:00
case DH6OPT_SUBSCRIBER_ID:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "Subscriber-ID";
2007-10-16 02:20:42 +00:00
case DH6OPT_CLIENT_FQDN:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "Client-FQDN";
2009-03-21 16:23:46 +00:00
case DH6OPT_PANA_AGENT:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "PANA-agent";
2009-03-21 16:23:46 +00:00
case DH6OPT_NEW_POSIX_TIMEZONE:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "POSIX-timezone";
2009-03-21 16:23:46 +00:00
case DH6OPT_NEW_TZDB_TIMEZONE:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "POSIX-tz-database";
2009-03-21 16:23:46 +00:00
case DH6OPT_ERO:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "Echo-request-option";
2009-03-21 16:23:46 +00:00
case DH6OPT_LQ_QUERY:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "Lease-query";
2009-03-21 16:23:46 +00:00
case DH6OPT_CLIENT_DATA:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "LQ-client-data";
2009-03-21 16:23:46 +00:00
case DH6OPT_CLT_TIME:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "Clt-time";
2009-03-21 16:23:46 +00:00
case DH6OPT_LQ_RELAY_DATA:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "LQ-relay-data";
2009-03-21 16:23:46 +00:00
case DH6OPT_LQ_CLIENT_LINK:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
return "LQ-client-link";
default:
snprintf(genstr, sizeof(genstr), "opt_%d", type);
return(genstr);
}
}
static const char *
dhcp6stcode(int code)
{
static char genstr[sizeof("code255") + 1]; /* XXX thread unsafe */
if (code > 255)
return "INVALID code";
switch(code) {
case DH6OPT_STCODE_SUCCESS:
return "success";
case DH6OPT_STCODE_UNSPECFAIL:
return "unspec failure";
case DH6OPT_STCODE_NOADDRAVAIL:
return "no addresses";
case DH6OPT_STCODE_NOBINDING:
return "no binding";
case DH6OPT_STCODE_NOTONLINK:
return "not on-link";
case DH6OPT_STCODE_USEMULTICAST:
return "use multicast";
case DH6OPT_STCODE_NOPREFIXAVAIL:
return "no prefixes";
2009-03-21 16:23:46 +00:00
case DH6OPT_STCODE_UNKNOWNQUERYTYPE:
return "unknown query type";
case DH6OPT_STCODE_MALFORMEDQUERY:
return "malformed query";
case DH6OPT_STCODE_NOTCONFIGURED:
return "not configured";
case DH6OPT_STCODE_NOTALLOWED:
return "not allowed";
default:
snprintf(genstr, sizeof(genstr), "code%d", code);
return(genstr);
}
}
static void
dhcp6opt_print(const u_char *cp, const u_char *ep)
{
struct dhcp6opt *dh6o;
u_char *tp;
size_t i;
u_int16_t opttype;
size_t optlen;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
u_int8_t auth_proto;
u_int authinfolen, authrealmlen;
if (cp == ep)
return;
while (cp < ep) {
if (ep < cp + sizeof(*dh6o))
goto trunc;
dh6o = (struct dhcp6opt *)cp;
optlen = EXTRACT_16BITS(&dh6o->dh6opt_len);
if (ep < cp + sizeof(*dh6o) + optlen)
goto trunc;
opttype = EXTRACT_16BITS(&dh6o->dh6opt_type);
printf(" (%s", dhcp6opt_name(opttype));
switch (opttype) {
case DH6OPT_CLIENTID:
case DH6OPT_SERVERID:
if (optlen < 2) {
/*(*/
printf(" ?)");
break;
}
tp = (u_char *)(dh6o + 1);
switch (EXTRACT_16BITS(tp)) {
case 1:
if (optlen >= 2 + 6) {
printf(" hwaddr/time type %u time %u ",
EXTRACT_16BITS(&tp[2]),
EXTRACT_32BITS(&tp[4]));
for (i = 8; i < optlen; i++)
printf("%02x", tp[i]);
/*(*/
printf(")");
} else {
/*(*/
printf(" ?)");
}
break;
case 2:
if (optlen >= 2 + 8) {
printf(" vid ");
for (i = 2; i < 2 + 8; i++)
printf("%02x", tp[i]);
/*(*/
printf(")");
} else {
/*(*/
printf(" ?)");
}
break;
case 3:
if (optlen >= 2 + 2) {
printf(" hwaddr type %u ",
EXTRACT_16BITS(&tp[2]));
for (i = 4; i < optlen; i++)
printf("%02x", tp[i]);
/*(*/
printf(")");
} else {
/*(*/
printf(" ?)");
}
break;
default:
printf(" type %d)", EXTRACT_16BITS(tp));
break;
}
break;
2007-10-16 02:20:42 +00:00
case DH6OPT_IA_ADDR:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (optlen < 24) {
/*(*/
2007-10-16 02:20:42 +00:00
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
printf(" %s", ip6addr_string(&tp[0]));
printf(" pltime:%u vltime:%u",
EXTRACT_32BITS(&tp[16]),
EXTRACT_32BITS(&tp[20]));
if (optlen > 24) {
2007-10-16 02:20:42 +00:00
/* there are sub-options */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
dhcp6opt_print(tp + 24, tp + 24 + optlen);
2007-10-16 02:20:42 +00:00
}
printf(")");
break;
case DH6OPT_ORO:
2009-03-21 16:23:46 +00:00
case DH6OPT_ERO:
if (optlen % 2) {
printf(" ?)");
break;
}
tp = (u_char *)(dh6o + 1);
for (i = 0; i < optlen; i += 2) {
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
printf(" %s",
dhcp6opt_name(EXTRACT_16BITS(&tp[i])));
}
printf(")");
break;
case DH6OPT_PREFERENCE:
if (optlen != 1) {
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
printf(" %d)", *tp);
break;
case DH6OPT_ELAPSED_TIME:
if (optlen != 2) {
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
printf(" %d)", EXTRACT_16BITS(tp));
break;
case DH6OPT_RELAY_MSG:
printf(" (");
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
dhcp6_print(tp, optlen);
printf(")");
break;
case DH6OPT_AUTH:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (optlen < 11) {
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
auth_proto = *tp;
switch (auth_proto) {
case DH6OPT_AUTHPROTO_DELAYED:
printf(" proto: delayed");
break;
case DH6OPT_AUTHPROTO_RECONFIG:
printf(" proto: reconfigure");
break;
default:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
printf(" proto: %d", auth_proto);
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp++;
switch (*tp) {
case DH6OPT_AUTHALG_HMACMD5:
/* XXX: may depend on the protocol */
printf(", alg: HMAC-MD5");
break;
default:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
printf(", alg: %d", *tp);
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp++;
switch (*tp) {
case DH6OPT_AUTHRDM_MONOCOUNTER:
printf(", RDM: mono");
break;
default:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
printf(", RDM: %d", *tp);
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp++;
printf(", RD:");
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
for (i = 0; i < 4; i++, tp += 2)
printf(" %04x", EXTRACT_16BITS(tp));
/* protocol dependent part */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
authinfolen = optlen - 11;
switch (auth_proto) {
case DH6OPT_AUTHPROTO_DELAYED:
if (authinfolen == 0)
break;
if (authinfolen < 20) {
printf(" ??");
break;
}
authrealmlen = authinfolen - 20;
if (authrealmlen > 0) {
printf(", realm: ");
}
for (i = 0; i < authrealmlen; i++, tp++)
printf("%02x", *tp);
printf(", key ID: %08x", EXTRACT_32BITS(tp));
tp += 4;
printf(", HMAC-MD5:");
for (i = 0; i < 4; i++, tp+= 4)
printf(" %08x", EXTRACT_32BITS(tp));
break;
case DH6OPT_AUTHPROTO_RECONFIG:
if (authinfolen != 17) {
printf(" ??");
break;
}
switch (*tp++) {
case DH6OPT_AUTHRECONFIG_KEY:
printf(" reconfig-key");
break;
case DH6OPT_AUTHRECONFIG_HMACMD5:
printf(" type: HMAC-MD5");
break;
default:
printf(" type: ??");
break;
}
printf(" value:");
for (i = 0; i < 4; i++, tp+= 4)
printf(" %08x", EXTRACT_32BITS(tp));
break;
default:
printf(" ??");
break;
}
printf(")");
break;
case DH6OPT_RAPID_COMMIT: /* nothing todo */
printf(")");
break;
case DH6OPT_INTERFACE_ID:
2009-03-21 16:23:46 +00:00
case DH6OPT_SUBSCRIBER_ID:
/*
* Since we cannot predict the encoding, print hex dump
* at most 10 characters.
*/
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
2009-03-21 16:23:46 +00:00
printf(" ");
for (i = 0; i < optlen && i < 10; i++)
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
printf("%02x", tp[i]);
2009-03-21 16:23:46 +00:00
printf("...)");
break;
case DH6OPT_RECONF_MSG:
tp = (u_char *)(dh6o + 1);
switch (*tp) {
case DH6_RENEW:
printf(" for renew)");
break;
case DH6_INFORM_REQ:
printf(" for inf-req)");
break;
default:
printf(" for ?\?\?(%02x))", *tp);
break;
}
break;
case DH6OPT_RECONF_ACCEPT: /* nothing todo */
printf(")");
break;
case DH6OPT_SIP_SERVER_A:
case DH6OPT_DNS:
case DH6OPT_NTP_SERVERS:
2007-10-16 02:20:42 +00:00
case DH6OPT_NIS_SERVERS:
case DH6OPT_NISP_SERVERS:
case DH6OPT_BCMCS_SERVER_A:
2009-03-21 16:23:46 +00:00
case DH6OPT_PANA_AGENT:
case DH6OPT_LQ_CLIENT_LINK:
if (optlen % 16) {
printf(" ?)");
break;
}
tp = (u_char *)(dh6o + 1);
for (i = 0; i < optlen; i += 16)
printf(" %s", ip6addr_string(&tp[i]));
printf(")");
break;
case DH6OPT_STATUS_CODE:
if (optlen < 2) {
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
printf(" %s)", dhcp6stcode(EXTRACT_16BITS(&tp[0])));
break;
case DH6OPT_IA_NA:
case DH6OPT_IA_PD:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (optlen < 12) {
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
printf(" IAID:%u T1:%u T2:%u",
EXTRACT_32BITS(&tp[0]),
EXTRACT_32BITS(&tp[4]),
EXTRACT_32BITS(&tp[8]));
if (optlen > 12) {
/* there are sub-options */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
dhcp6opt_print(tp + 12, tp + 12 + optlen);
}
printf(")");
break;
2009-03-21 16:23:46 +00:00
case DH6OPT_IA_TA:
if (optlen < 4) {
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
printf(" IAID:%u", EXTRACT_32BITS(tp));
2009-03-21 16:23:46 +00:00
if (optlen > 4) {
/* there are sub-options */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
dhcp6opt_print(tp + 4, tp + 4 + optlen);
2009-03-21 16:23:46 +00:00
}
printf(")");
break;
case DH6OPT_IA_PD_PREFIX:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (optlen < 25) {
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
printf(" %s/%d", ip6addr_string(&tp[9]), tp[8]);
printf(" pltime:%u vltime:%u",
EXTRACT_32BITS(&tp[0]),
EXTRACT_32BITS(&tp[4]));
if (optlen > 25) {
/* there are sub-options */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
dhcp6opt_print(tp + 25, tp + 25 + optlen);
}
printf(")");
break;
case DH6OPT_LIFETIME:
2009-03-21 16:23:46 +00:00
case DH6OPT_CLT_TIME:
if (optlen != 4) {
printf(" ?)");
break;
}
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
printf(" %d)", EXTRACT_32BITS(tp));
break;
2009-03-21 16:23:46 +00:00
case DH6OPT_REMOTE_ID:
if (optlen < 4) {
printf(" ?)");
break;
}
tp = (u_char *)(dh6o + 1);
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
printf(" %d ", EXTRACT_32BITS(tp));
2009-03-21 16:23:46 +00:00
/*
* Print hex dump first 10 characters.
*/
for (i = 4; i < optlen && i < 14; i++)
printf("%02x", tp[i]);
printf("...)");
break;
case DH6OPT_LQ_QUERY:
if (optlen < 17) {
printf(" ?)");
break;
}
tp = (u_char *)(dh6o + 1);
switch (*tp) {
case 1:
printf(" by-address");
break;
case 2:
printf(" by-clientID");
break;
default:
printf(" type_%d", (int)*tp);
break;
}
printf(" %s", ip6addr_string(&tp[1]));
if (optlen > 17) {
/* there are query-options */
dhcp6opt_print(tp + 17, tp + optlen);
}
printf(")");
break;
case DH6OPT_CLIENT_DATA:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
tp = (u_char *)(dh6o + 1);
2009-03-21 16:23:46 +00:00
if (optlen > 0) {
/* there are encapsulated options */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
dhcp6opt_print(tp, tp + optlen);
2009-03-21 16:23:46 +00:00
}
printf(")");
break;
case DH6OPT_LQ_RELAY_DATA:
if (optlen < 16) {
printf(" ?)");
break;
}
tp = (u_char *)(dh6o + 1);
printf(" %s ", ip6addr_string(&tp[0]));
/*
* Print hex dump first 10 characters.
*/
for (i = 16; i < optlen && i < 26; i++)
printf("%02x", tp[i]);
printf("...)");
break;
default:
printf(")");
break;
}
cp += sizeof(*dh6o) + optlen;
}
return;
trunc:
printf("[|dhcp6ext]");
}
/*
* Print dhcp6 packets
*/
void
dhcp6_print(const u_char *cp, u_int length)
{
struct dhcp6 *dh6;
struct dhcp6_relay *dh6relay;
const u_char *ep;
u_char *extp;
const char *name;
printf("dhcp6");
ep = (u_char *)snapend;
if (cp + length < ep)
ep = cp + length;
dh6 = (struct dhcp6 *)cp;
dh6relay = (struct dhcp6_relay *)cp;
TCHECK(dh6->dh6_xid);
switch (dh6->dh6_msgtype) {
case DH6_SOLICIT:
name = "solicit";
break;
case DH6_ADVERTISE:
name = "advertise";
break;
case DH6_REQUEST:
name = "request";
break;
case DH6_CONFIRM:
name = "confirm";
break;
case DH6_RENEW:
name = "renew";
break;
case DH6_REBIND:
name = "rebind";
break;
case DH6_REPLY:
name = "reply";
break;
case DH6_RELEASE:
name = "release";
break;
case DH6_DECLINE:
name = "decline";
break;
case DH6_RECONFIGURE:
name = "reconfigure";
break;
case DH6_INFORM_REQ:
name= "inf-req";
break;
case DH6_RELAY_FORW:
name= "relay-fwd";
break;
case DH6_RELAY_REPLY:
name= "relay-reply";
break;
2009-03-21 16:23:46 +00:00
case DH6_LEASEQUERY:
name= "leasequery";
break;
case DH6_LQ_REPLY:
name= "leasequery-reply";
break;
default:
name = NULL;
break;
}
if (!vflag) {
if (name)
printf(" %s", name);
else if (dh6->dh6_msgtype != DH6_RELAY_FORW &&
dh6->dh6_msgtype != DH6_RELAY_REPLY) {
printf(" msgtype-%u", dh6->dh6_msgtype);
}
return;
}
/* XXX relay agent messages have to be handled differently */
if (name)
printf(" %s (", name); /*)*/
else
printf(" msgtype-%u (", dh6->dh6_msgtype); /*)*/
if (dh6->dh6_msgtype != DH6_RELAY_FORW &&
dh6->dh6_msgtype != DH6_RELAY_REPLY) {
printf("xid=%x", EXTRACT_32BITS(&dh6->dh6_xid) & DH6_XIDMASK);
extp = (u_char *)(dh6 + 1);
dhcp6opt_print(extp, ep);
} else { /* relay messages */
struct in6_addr addr6;
TCHECK(dh6relay->dh6relay_peeraddr);
memcpy(&addr6, dh6relay->dh6relay_linkaddr, sizeof (addr6));
printf("linkaddr=%s", ip6addr_string(&addr6));
memcpy(&addr6, dh6relay->dh6relay_peeraddr, sizeof (addr6));
printf(" peeraddr=%s", ip6addr_string(&addr6));
dhcp6opt_print((u_char *)(dh6relay + 1), ep);
}
/*(*/
printf(")");
return;
trunc:
printf("[|dhcp6]");
}