freebsd_amp_hwpstate/sys/dev/syscons/fade/fade_saver.c

140 lines
3.4 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1995-1997 S<EFBFBD>ren Schmidt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
1995-05-30 06:12:45 +00:00
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software withough specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: fade_saver.c,v 1.11 1997/07/15 14:49:25 yokota Exp $
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/exec.h>
#include <sys/sysent.h>
#include <sys/lkm.h>
Incorporated lots of fixes and suggestions from Bruce and changes to facilitate the new saver loading/unloading notification interface in syscons. daemon_saver: - M_NOWAIT was wrong, since NULL returns are not handled. Just use M_WAITOK. - use `ostype' instead of hard-coded "FreeBSD". Now there is no more hard-coded string! (But, who will run this screen saver on other OS?!) - put macros and data declarations in a consistent order. - -DDEAMON_ONLY and -DSHOW_HOSTNAME options added in the previous commit are removed. Options of this kind can go stale and no one notices because no one uses them. DEAMON_ONLY is just removed. SHOW_HOSTNAME is made default. snake_saver: - use `ostype' and `osrelease' as in the daemon saver. The string changes slightly - there was a hyphen after "FreeBSD"; now there is a space. (It is consistent with uname -a, like the daemon server already is.) all screen savers: - Use the new add_scrn_saver()/remove_scrn_saver() in syscons.c to declare loading/unloading of a screen saver. Removed reference to `current_saver' and the variable `old_saver' as they are not necessary anymore. - The blank, fade and green screen savers manipulate VGA registers. Module loading should fail for non-VGA cards. - `scrn_blanked' is consistently treated as a number/counter rather than boolean. - Some savers touch `scp->start' and `scp->end' to force entire screen update when stopping themselves. This is unnecessary now because syscons.c takes care of that. - cleared up many unused or unnecessary #include statements. - Removed -DLKM from Makefiles. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THIS CHANGE.
1997-07-15 14:49:39 +00:00
#include <i386/isa/isa.h>
#include <saver.h>
Changed the first (name) arg of MOD_DEV(), MOD_EXEC() and MOD_MISC() from a string to an identifier so that it can be used to generate declarations and strings. It's much easier to stringize an identifier than to identifize a string. A uniform naming scheme must be used for the automatically generated things to apply. This is a feature. Used the module identifer to generate prototypes for the module load, unload and stat functions. Removed the few prototypes for these that already existed. Used the module identifier to generate a unique struct tag in MOD_DEV(). This should probably be done for all the MOD_*() macros. Moved the trailing semicolon from the MOD_*() macro definitions to the macro invocations that didn't already (bogusly) have it. Staticized the module load and unload functions. Added function return types for the module load, unload and stat functions. lkm/ibcs2/ibcs2.c: Included <sys/sysproto.h> to get everything prototyped. Cleaned up #includes. lkm/ibcs2/ipfw.c: Cleaned up #includes. lkm/linux/linux.c: The module name had to change from "linux_emulator" to "linux_mod" to be automatically generated. Cleaned up #includes. lkm/syscons/*/*_saver.c: Completed delcarations of function pointers. sys/i386/isa/atapi.c: The module name had to change from "atapi" to "atapi_mod" to be automatically generated. sys/i386/isa/wcd.c: Used the fixed MOD_DEV(). This module has two devices and expanded the macro in the source instead of fixing it. The module names had to change from "wcd" and "rwcd" to "wcd_mod" and "rwcd_mod" to be automatically generated. sys/pccard/pcic.c: The module name had to change from "pcic" to "pcic_mod" to be automatically generated.
1995-11-14 07:35:57 +00:00
MOD_MISC(fade_saver);
1995-05-30 06:12:45 +00:00
static void
fade_saver(int blank)
{
static int count = 0;
int i;
if (blank) {
scrn_blanked = 1;
switch (crtc_type) {
case KD_VGA:
if (count < 64) {
outb(PIXMASK, 0xFF); /* no pixelmask */
outb(PALWADR, 0x00);
outb(PALDATA, 0);
outb(PALDATA, 0);
outb(PALDATA, 0);
for (i = 3; i < 768; i++) {
if (palette[i] - count > 15)
outb(PALDATA, palette[i]-count);
else
outb(PALDATA, 15);
}
inb(crtc_addr+6); /* reset flip/flop */
outb(ATC, 0x20); /* enable palette */
count++;
}
break;
case KD_EGA:
/* not yet done XXX */
break;
case KD_CGA:
outb(crtc_addr + 4, 0x25);
break;
case KD_MONO:
case KD_HERCULES:
outb(crtc_addr + 4, 0x21);
break;
default:
break;
}
}
else {
switch (crtc_type) {
case KD_VGA:
load_palette(palette);
count = 0;
break;
case KD_EGA:
/* not yet done XXX */
break;
case KD_CGA:
outb(crtc_addr + 4, 0x2d);
break;
case KD_MONO:
case KD_HERCULES:
outb(crtc_addr + 4, 0x29);
break;
default:
break;
}
scrn_blanked = 0;
}
}
Changed the first (name) arg of MOD_DEV(), MOD_EXEC() and MOD_MISC() from a string to an identifier so that it can be used to generate declarations and strings. It's much easier to stringize an identifier than to identifize a string. A uniform naming scheme must be used for the automatically generated things to apply. This is a feature. Used the module identifer to generate prototypes for the module load, unload and stat functions. Removed the few prototypes for these that already existed. Used the module identifier to generate a unique struct tag in MOD_DEV(). This should probably be done for all the MOD_*() macros. Moved the trailing semicolon from the MOD_*() macro definitions to the macro invocations that didn't already (bogusly) have it. Staticized the module load and unload functions. Added function return types for the module load, unload and stat functions. lkm/ibcs2/ibcs2.c: Included <sys/sysproto.h> to get everything prototyped. Cleaned up #includes. lkm/ibcs2/ipfw.c: Cleaned up #includes. lkm/linux/linux.c: The module name had to change from "linux_emulator" to "linux_mod" to be automatically generated. Cleaned up #includes. lkm/syscons/*/*_saver.c: Completed delcarations of function pointers. sys/i386/isa/atapi.c: The module name had to change from "atapi" to "atapi_mod" to be automatically generated. sys/i386/isa/wcd.c: Used the fixed MOD_DEV(). This module has two devices and expanded the macro in the source instead of fixing it. The module names had to change from "wcd" and "rwcd" to "wcd_mod" and "rwcd_mod" to be automatically generated. sys/pccard/pcic.c: The module name had to change from "pcic" to "pcic_mod" to be automatically generated.
1995-11-14 07:35:57 +00:00
static int
fade_saver_load(struct lkm_table *lkmtp, int cmd)
{
switch (crtc_type) {
case KD_MONO:
case KD_HERCULES:
case KD_CGA:
/*
* `fade' saver is not fully implemented for MDA and CGA.
* It simply blanks the display instead.
*/
case KD_VGA:
break;
case KD_EGA:
/* EGA is yet to be supported */
default:
return ENODEV;
}
Incorporated lots of fixes and suggestions from Bruce and changes to facilitate the new saver loading/unloading notification interface in syscons. daemon_saver: - M_NOWAIT was wrong, since NULL returns are not handled. Just use M_WAITOK. - use `ostype' instead of hard-coded "FreeBSD". Now there is no more hard-coded string! (But, who will run this screen saver on other OS?!) - put macros and data declarations in a consistent order. - -DDEAMON_ONLY and -DSHOW_HOSTNAME options added in the previous commit are removed. Options of this kind can go stale and no one notices because no one uses them. DEAMON_ONLY is just removed. SHOW_HOSTNAME is made default. snake_saver: - use `ostype' and `osrelease' as in the daemon saver. The string changes slightly - there was a hyphen after "FreeBSD"; now there is a space. (It is consistent with uname -a, like the daemon server already is.) all screen savers: - Use the new add_scrn_saver()/remove_scrn_saver() in syscons.c to declare loading/unloading of a screen saver. Removed reference to `current_saver' and the variable `old_saver' as they are not necessary anymore. - The blank, fade and green screen savers manipulate VGA registers. Module loading should fail for non-VGA cards. - `scrn_blanked' is consistently treated as a number/counter rather than boolean. - Some savers touch `scp->start' and `scp->end' to force entire screen update when stopping themselves. This is unnecessary now because syscons.c takes care of that. - cleared up many unused or unnecessary #include statements. - Removed -DLKM from Makefiles. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THIS CHANGE.
1997-07-15 14:49:39 +00:00
return add_scrn_saver(fade_saver);
}
Changed the first (name) arg of MOD_DEV(), MOD_EXEC() and MOD_MISC() from a string to an identifier so that it can be used to generate declarations and strings. It's much easier to stringize an identifier than to identifize a string. A uniform naming scheme must be used for the automatically generated things to apply. This is a feature. Used the module identifer to generate prototypes for the module load, unload and stat functions. Removed the few prototypes for these that already existed. Used the module identifier to generate a unique struct tag in MOD_DEV(). This should probably be done for all the MOD_*() macros. Moved the trailing semicolon from the MOD_*() macro definitions to the macro invocations that didn't already (bogusly) have it. Staticized the module load and unload functions. Added function return types for the module load, unload and stat functions. lkm/ibcs2/ibcs2.c: Included <sys/sysproto.h> to get everything prototyped. Cleaned up #includes. lkm/ibcs2/ipfw.c: Cleaned up #includes. lkm/linux/linux.c: The module name had to change from "linux_emulator" to "linux_mod" to be automatically generated. Cleaned up #includes. lkm/syscons/*/*_saver.c: Completed delcarations of function pointers. sys/i386/isa/atapi.c: The module name had to change from "atapi" to "atapi_mod" to be automatically generated. sys/i386/isa/wcd.c: Used the fixed MOD_DEV(). This module has two devices and expanded the macro in the source instead of fixing it. The module names had to change from "wcd" and "rwcd" to "wcd_mod" and "rwcd_mod" to be automatically generated. sys/pccard/pcic.c: The module name had to change from "pcic" to "pcic_mod" to be automatically generated.
1995-11-14 07:35:57 +00:00
static int
fade_saver_unload(struct lkm_table *lkmtp, int cmd)
{
Incorporated lots of fixes and suggestions from Bruce and changes to facilitate the new saver loading/unloading notification interface in syscons. daemon_saver: - M_NOWAIT was wrong, since NULL returns are not handled. Just use M_WAITOK. - use `ostype' instead of hard-coded "FreeBSD". Now there is no more hard-coded string! (But, who will run this screen saver on other OS?!) - put macros and data declarations in a consistent order. - -DDEAMON_ONLY and -DSHOW_HOSTNAME options added in the previous commit are removed. Options of this kind can go stale and no one notices because no one uses them. DEAMON_ONLY is just removed. SHOW_HOSTNAME is made default. snake_saver: - use `ostype' and `osrelease' as in the daemon saver. The string changes slightly - there was a hyphen after "FreeBSD"; now there is a space. (It is consistent with uname -a, like the daemon server already is.) all screen savers: - Use the new add_scrn_saver()/remove_scrn_saver() in syscons.c to declare loading/unloading of a screen saver. Removed reference to `current_saver' and the variable `old_saver' as they are not necessary anymore. - The blank, fade and green screen savers manipulate VGA registers. Module loading should fail for non-VGA cards. - `scrn_blanked' is consistently treated as a number/counter rather than boolean. - Some savers touch `scp->start' and `scp->end' to force entire screen update when stopping themselves. This is unnecessary now because syscons.c takes care of that. - cleared up many unused or unnecessary #include statements. - Removed -DLKM from Makefiles. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THIS CHANGE.
1997-07-15 14:49:39 +00:00
return remove_scrn_saver(fade_saver);
}
Changed the first (name) arg of MOD_DEV(), MOD_EXEC() and MOD_MISC() from a string to an identifier so that it can be used to generate declarations and strings. It's much easier to stringize an identifier than to identifize a string. A uniform naming scheme must be used for the automatically generated things to apply. This is a feature. Used the module identifer to generate prototypes for the module load, unload and stat functions. Removed the few prototypes for these that already existed. Used the module identifier to generate a unique struct tag in MOD_DEV(). This should probably be done for all the MOD_*() macros. Moved the trailing semicolon from the MOD_*() macro definitions to the macro invocations that didn't already (bogusly) have it. Staticized the module load and unload functions. Added function return types for the module load, unload and stat functions. lkm/ibcs2/ibcs2.c: Included <sys/sysproto.h> to get everything prototyped. Cleaned up #includes. lkm/ibcs2/ipfw.c: Cleaned up #includes. lkm/linux/linux.c: The module name had to change from "linux_emulator" to "linux_mod" to be automatically generated. Cleaned up #includes. lkm/syscons/*/*_saver.c: Completed delcarations of function pointers. sys/i386/isa/atapi.c: The module name had to change from "atapi" to "atapi_mod" to be automatically generated. sys/i386/isa/wcd.c: Used the fixed MOD_DEV(). This module has two devices and expanded the macro in the source instead of fixing it. The module names had to change from "wcd" and "rwcd" to "wcd_mod" and "rwcd_mod" to be automatically generated. sys/pccard/pcic.c: The module name had to change from "pcic" to "pcic_mod" to be automatically generated.
1995-11-14 07:35:57 +00:00
int
fade_saver_mod(struct lkm_table *lkmtp, int cmd, int ver)
{
MOD_DISPATCH(fade_saver, lkmtp, cmd, ver,
fade_saver_load, fade_saver_unload, lkm_nullcmd);
}