talexander
/
freebsd_amp_hwpstate
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd_amp_hwpstate/sys/arm/at91/uart_cpu_at91rm9200usart.c

84 lines
2.5 KiB
C
Raw Normal View History

Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
/*-
* Copyright (c) 2003 Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "opt_uart.h"
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/cons.h>
#include <machine/bus.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_cpu.h>
#include <arm/at91/at91rm92reg.h>
bus_space_tag_t uart_bus_space_io;
bus_space_tag_t uart_bus_space_mem;
extern struct uart_ops at91_usart_ops;
extern struct bus_space at91_bs_tag;
int
uart_cpu_eqres(struct uart_bas *b1, struct uart_bas *b2)
{
return ((b1->bsh == b2->bsh && b1->bst == b2->bst) ? 1 : 0);
}
int
uart_cpu_getdev(int devtype, struct uart_devinfo *di)
{
di->ops = at91_usart_ops;
di->bas.chan = 0;
di->bas.bst = &at91_bs_tag;
/*
* XXX: Not pretty, but will work because we map VA == PA early
* for the last 1MB of memory.
*/
Resurrect Skyeye support : Add a new option, SKYEYE_WORKAROUNDS, which as the name suggests adds workarounds for things skyeye doesn't simulate. Specifically : - Use USART0 instead of DBGU as the console, make it not use DMA, and manually provoke an interrupt when we're done in the transmit function. - Skyeye maintains an internal counter for clock, but apparently there's no way to access it, so hack the timecounter code to return a value which is increased at every clock interrupts. This is gross, but I didn't find a better way to implement timecounters without hacking Skyeye to get the counter value. - Force the write-back of PTEs once we're done writing them, even if they are supposed to be write-through. I don't know why I have to do that.
2006-05-13 23:41:16 +00:00
#ifdef SKYEYE_WORKAROUNDS
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
di->bas.bsh = AT91RM92_BASE + AT91RM92_USART0_BASE;
di->baudrate = 38400;
#else
di->bas.bsh = AT91RM92_BASE + AT91RM92_SYS_BASE + DBGU;
di->baudrate = 115200;
#endif
di->bas.regshft = 0;
di->bas.rclk = 0;
di->databits = 8;
di->stopbits = 1;
di->parity = UART_PARITY_NONE;
Resurrect Skyeye support : Add a new option, SKYEYE_WORKAROUNDS, which as the name suggests adds workarounds for things skyeye doesn't simulate. Specifically : - Use USART0 instead of DBGU as the console, make it not use DMA, and manually provoke an interrupt when we're done in the transmit function. - Skyeye maintains an internal counter for clock, but apparently there's no way to access it, so hack the timecounter code to return a value which is increased at every clock interrupts. This is gross, but I didn't find a better way to implement timecounters without hacking Skyeye to get the counter value. - Force the write-back of PTEs once we're done writing them, even if they are supposed to be write-through. I don't know why I have to do that.
2006-05-13 23:41:16 +00:00
uart_bus_space_io = &at91_bs_tag;
uart_bus_space_mem = NULL;
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
/* Check the environment for overrides */
if (uart_getenv(devtype, di) == 0)
return (0);
return (0);
}