freebsd_amp_hwpstate/sys/dev/isp/isp_freebsd.c

2012 lines
53 KiB
C
Raw Normal View History

1999-08-28 01:08:13 +00:00
/* $FreeBSD$ */
/*
* Platform (FreeBSD) dependent common attachment code for Qlogic adapters.
*
*---------------------------------------
* Copyright (c) 1997, 1998, 1999 by Matthew Jacob
* NASA/Ames Research Center
* All rights reserved.
*---------------------------------------
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <dev/isp/isp_freebsd.h>
static void isp_cam_async(void *, u_int32_t, struct cam_path *, void *);
static void isp_poll(struct cam_sim *);
static void isp_relsim(void *);
static void isp_action(struct cam_sim *, union ccb *);
static struct ispsoftc *isplist = NULL;
/* #define ISP_LUN0_ONLY 1 */
1999-12-16 05:42:02 +00:00
#ifdef DEBUG
int isp_debug = 2;
#elif defined(CAMDEBUG) || defined(DIAGNOSTIC)
int isp_debug = 1;
#else
int isp_debug = 0;
#endif
void
isp_attach(struct ispsoftc *isp)
{
int primary, secondary;
struct ccb_setasync csa;
struct cam_devq *devq;
struct cam_sim *sim;
struct cam_path *path;
/*
* Establish (in case of 12X0) which bus is the primary.
*/
primary = 0;
secondary = 1;
/*
* Create the device queue for our SIM(s).
*/
devq = cam_simq_alloc(isp->isp_maxcmds);
if (devq == NULL) {
return;
}
/*
* Construct our SIM entry.
*/
sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
isp->isp_unit, 1, isp->isp_maxcmds, devq);
if (sim == NULL) {
cam_simq_free(devq);
return;
}
if (xpt_bus_register(sim, primary) != CAM_SUCCESS) {
cam_sim_free(sim, TRUE);
return;
}
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
return;
}
xpt_setup_ccb(&csa.ccb_h, path, 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = isp_cam_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
isp->isp_sim = sim;
isp->isp_path = path;
/*
* If we have a second channel, construct SIM entry for that.
*/
1999-12-16 05:42:02 +00:00
if (IS_DUALBUS(isp)) {
sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
isp->isp_unit, 1, isp->isp_maxcmds, devq);
if (sim == NULL) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
cam_simq_free(devq);
return;
}
if (xpt_bus_register(sim, secondary) != CAM_SUCCESS) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
cam_sim_free(sim, TRUE);
return;
}
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
return;
}
xpt_setup_ccb(&csa.ccb_h, path, 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = isp_cam_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
isp->isp_sim2 = sim;
isp->isp_path2 = path;
}
isp->isp_state = ISP_RUNSTATE;
if (isplist == NULL) {
isplist = isp;
} else {
struct ispsoftc *tmp = isplist;
while (tmp->isp_osinfo.next) {
tmp = tmp->isp_osinfo.next;
}
tmp->isp_osinfo.next = isp;
}
}
/*
* Put the target mode functions here, because some are inlines
*/
#ifdef ISP_TARGET_MODE
#include "targbh.h"
static __inline int is_lun_enabled(struct ispsoftc *, lun_id_t);
static __inline int are_any_luns_enabled(struct ispsoftc *);
static __inline tstate_t *get_lun_statep(struct ispsoftc *, lun_id_t);
static __inline void rls_lun_statep(struct ispsoftc *, tstate_t *);
static __inline int isp_psema_sig_rqe(struct ispsoftc *);
static __inline int isp_cv_wait_timed_rqe(struct ispsoftc *, int);
static __inline void isp_cv_signal_rqe(struct ispsoftc *, int);
static __inline void isp_vsema_rqe(struct ispsoftc *);
static cam_status
create_lun_state(struct ispsoftc *, struct cam_path *, tstate_t **);
static void destroy_lun_state(struct ispsoftc *, tstate_t *);
static void isp_en_lun(struct ispsoftc *, union ccb *);
static cam_status isp_abort_tgt_ccb(struct ispsoftc *, union ccb *);
static cam_status isp_target_start_ctio(struct ispsoftc *, union ccb *);
static int isp_handle_platform_atio(struct ispsoftc *, at_entry_t *);
static int isp_handle_platform_atio2(struct ispsoftc *, at2_entry_t *);
static int isp_handle_platform_ctio(struct ispsoftc *, void *);
static __inline int
is_lun_enabled(struct ispsoftc *isp, lun_id_t lun)
{
tstate_t *tptr;
int s = splsoftcam();
if ((tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(lun)]) == NULL) {
splx(s);
return (0);
}
do {
if (tptr->lun == (lun_id_t) lun) {
splx(s);
return (1);
}
} while ((tptr = tptr->next) != NULL);
splx(s);
return (0);
}
static __inline int
are_any_luns_enabled(struct ispsoftc *isp)
{
int i;
for (i = 0; i < LUN_HASH_SIZE; i++) {
if (isp->isp_osinfo.lun_hash[i]) {
return (1);
}
}
return (0);
}
static __inline tstate_t *
get_lun_statep(struct ispsoftc *isp, lun_id_t lun)
{
tstate_t *tptr;
int s;
s = splsoftcam();
if (lun == CAM_LUN_WILDCARD) {
tptr = &isp->isp_osinfo.tsdflt;
tptr->hold++;
splx(s);
return (tptr);
} else {
tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(lun)];
}
if (tptr == NULL) {
splx(s);
return (NULL);
}
do {
if (tptr->lun == lun) {
tptr->hold++;
splx(s);
return (tptr);
}
} while ((tptr = tptr->next) != NULL);
splx(s);
return (tptr);
}
static __inline void
rls_lun_statep(struct ispsoftc *isp, tstate_t *tptr)
{
if (tptr->hold)
tptr->hold--;
}
static __inline int
isp_psema_sig_rqe(struct ispsoftc *isp)
{
int s = splcam();
while (isp->isp_osinfo.tmflags & TM_BUSY) {
isp->isp_osinfo.tmflags |= TM_WANTED;
if (tsleep(&isp->isp_osinfo.tmflags, PRIBIO|PCATCH, "i0", 0)) {
splx(s);
return (-1);
}
isp->isp_osinfo.tmflags |= TM_BUSY;
}
splx(s);
return (0);
}
static __inline int
isp_cv_wait_timed_rqe(struct ispsoftc *isp, int timo)
{
int s = splcam();
if (tsleep(&isp->isp_osinfo.rstatus, PRIBIO, "qt1", timo)) {
splx(s);
return (-1);
}
splx(s);
return (0);
}
static __inline void
isp_cv_signal_rqe(struct ispsoftc *isp, int status)
{
isp->isp_osinfo.rstatus = status;
wakeup(&isp->isp_osinfo.rstatus);
}
static __inline void
isp_vsema_rqe(struct ispsoftc *isp)
{
int s = splcam();
if (isp->isp_osinfo.tmflags & TM_WANTED) {
isp->isp_osinfo.tmflags &= ~TM_WANTED;
wakeup(&isp->isp_osinfo.tmflags);
}
isp->isp_osinfo.tmflags &= ~TM_BUSY;
splx(s);
}
static cam_status
create_lun_state(struct ispsoftc *isp, struct cam_path *path, tstate_t **rslt)
{
int s;
cam_status status;
lun_id_t lun;
tstate_t *tptr, *new;
lun = xpt_path_lun_id(path);
if (lun < 0) {
return (CAM_LUN_INVALID);
}
if (is_lun_enabled(isp, lun)) {
return (CAM_LUN_ALRDY_ENA);
}
new = (tstate_t *) malloc(sizeof (tstate_t), M_DEVBUF, M_NOWAIT);
if (new == NULL) {
return (CAM_RESRC_UNAVAIL);
}
bzero(new, sizeof (tstate_t));
status = xpt_create_path(&new->owner, NULL, xpt_path_path_id(path),
xpt_path_target_id(path), xpt_path_lun_id(path));
if (status != CAM_REQ_CMP) {
free(new, M_DEVBUF);
return (status);
}
new->lun = lun;
SLIST_INIT(&new->atios);
SLIST_INIT(&new->inots);
new->hold = 1;
s = splsoftcam();
if ((tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(lun)]) == NULL) {
isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(lun)] = new;
} else {
while (tptr->next)
tptr = tptr->next;
tptr->next = new;
}
splx(s);
*rslt = new;
return (CAM_REQ_CMP);
}
static __inline void
destroy_lun_state(struct ispsoftc *isp, tstate_t *tptr)
{
tstate_t *lw, *pw;
int s;
s = splsoftcam();
if (tptr->hold) {
splx(s);
return;
}
pw = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(tptr->lun)];
if (pw == NULL) {
splx(s);
return;
} else if (pw->lun == tptr->lun) {
isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(tptr->lun)] = pw->next;
} else {
lw = pw;
pw = lw->next;
while (pw) {
if (pw->lun == tptr->lun) {
lw->next = pw->next;
break;
}
lw = pw;
pw = pw->next;
}
if (pw == NULL) {
splx(s);
return;
}
}
free(tptr, M_DEVBUF);
splx(s);
}
static void
isp_en_lun(struct ispsoftc *isp, union ccb *ccb)
{
const char *lfmt = "Lun now %sabled for target mode\n";
struct ccb_en_lun *cel = &ccb->cel;
tstate_t *tptr;
u_int16_t rstat;
int bus, s;
lun_id_t lun;
target_id_t tgt;
bus = XS_CHANNEL(ccb);
tgt = ccb->ccb_h.target_id;
lun = ccb->ccb_h.target_lun;
/*
* First, check to see if we're enabling on fibre channel
* and don't yet have a notion of who the heck we are (no
* loop yet). We do this by
*/
if (IS_FC(isp) && cel->enable &&
(isp->isp_osinfo.tmflags & TM_TMODE_ENABLED) == 0) {
int rv;
fcparam *fcp = isp->isp_param;
s = splcam();
rv = isp_control(isp, ISPCTL_FCLINK_TEST, NULL);
(void) splx(s);
if (rv || fcp->isp_fwstate != FW_READY) {
xpt_print_path(ccb->ccb_h.path);
printf("link status not good yet\n");
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
s = splcam();
rv = isp_control(isp, ISPCTL_PDB_SYNC, NULL);
(void) splx(s);
if (rv || fcp->isp_loopstate != LOOP_READY) {
xpt_print_path(ccb->ccb_h.path);
printf("could not get a good port database\n");
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
}
/*
* Next check to see whether this is a target/lun wildcard action.
*
* If so, we enable/disable target mode but don't do any lun enabling.
*/
if (lun == CAM_LUN_WILDCARD && tgt == CAM_TARGET_WILDCARD) {
int av;
tptr = &isp->isp_osinfo.tsdflt;
if (cel->enable) {
if (isp->isp_osinfo.tmflags & TM_TMODE_ENABLED) {
ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
return;
}
ccb->ccb_h.status =
xpt_create_path(&tptr->owner, NULL,
xpt_path_path_id(ccb->ccb_h.path),
xpt_path_target_id(ccb->ccb_h.path),
xpt_path_lun_id(ccb->ccb_h.path));
if (ccb->ccb_h.status != CAM_REQ_CMP) {
return;
}
SLIST_INIT(&tptr->atios);
SLIST_INIT(&tptr->inots);
av = 1;
s = splcam();
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
xpt_free_path(tptr->owner);
splx(s);
return;
}
isp->isp_osinfo.tmflags |= TM_TMODE_ENABLED;
splx(s);
} else {
if ((isp->isp_osinfo.tmflags & TM_TMODE_ENABLED) == 0) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
if (are_any_luns_enabled(isp)) {
ccb->ccb_h.status = CAM_SCSI_BUSY;
return;
}
av = 0;
s = splcam();
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
splx(s);
return;
}
isp->isp_osinfo.tmflags &= ~TM_TMODE_ENABLED;
splx(s);
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_print_path(ccb->ccb_h.path);
printf(lfmt, (cel->enable) ? "en" : "dis");
return;
}
/*
* Do some sanity checking first.
*/
if (IS_SCSI(isp)) {
if (lun < 0 || lun >= 32) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
if (tgt != CAM_TARGET_WILDCARD &&
tgt != ((sdparam *) isp->isp_param)->isp_initiator_id) {
ccb->ccb_h.status = CAM_TID_INVALID;
return;
}
} else {
#ifdef ISP2100_SCCLUN
if (lun < 0 || lun >= 65536) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
#else
if (lun < 0 || lun >= 16) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
#endif
if (tgt != CAM_TARGET_WILDCARD &&
tgt != ((fcparam *) isp->isp_param)->isp_loopid) {
ccb->ccb_h.status = CAM_TID_INVALID;
return;
}
}
if (cel->enable) {
ccb->ccb_h.status =
create_lun_state(isp, ccb->ccb_h.path, &tptr);
if (ccb->ccb_h.status != CAM_REQ_CMP) {
return;
}
} else {
tptr = get_lun_statep(isp, lun);
if (tptr == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
}
if (isp_psema_sig_rqe(isp)) {
rls_lun_statep(isp, tptr);
if (cel->enable)
destroy_lun_state(isp, tptr);
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
s = splcam();
if (cel->enable) {
u_int32_t seq = isp->isp_osinfo.rollinfo++;
rstat = LUN_ERR;
if (isp_lun_cmd(isp, RQSTYPE_ENABLE_LUN, bus, tgt, lun, seq)) {
xpt_print_path(ccb->ccb_h.path);
printf("isp_lun_cmd failed\n");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
printf("wait for ENABLE LUN timed out\n");
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
printf("ENABLE LUN returned 0x%x\n", rstat);
goto out;
}
} else {
u_int32_t seq;
seq = isp->isp_osinfo.rollinfo++;
rstat = LUN_ERR;
if (isp_lun_cmd(isp, -RQSTYPE_MODIFY_LUN, bus, tgt, lun, seq)) {
xpt_print_path(ccb->ccb_h.path);
printf("isp_lun_cmd failed\n");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
printf("wait for MODIFY LUN timed out\n");
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
printf("MODIFY LUN returned 0x%x\n", rstat);
goto out;
}
rstat = LUN_ERR;
seq = isp->isp_osinfo.rollinfo++;
if (isp_lun_cmd(isp, -RQSTYPE_ENABLE_LUN, bus, tgt, lun, seq)) {
xpt_print_path(ccb->ccb_h.path);
printf("isp_lun_cmd failed\n");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
printf("wait for ENABLE LUN timed out\n");
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
printf("ENABLE LUN returned 0x%x\n", rstat);
goto out;
}
}
out:
isp_vsema_rqe(isp);
splx(s);
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
printf("lun %sable failed\n", (cel->enable) ? "en" : "dis");
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
rls_lun_statep(isp, tptr);
if (cel->enable)
destroy_lun_state(isp, tptr);
} else {
xpt_print_path(ccb->ccb_h.path);
printf(lfmt, (cel->enable) ? "en" : "dis");
rls_lun_statep(isp, tptr);
if (cel->enable == 0) {
destroy_lun_state(isp, tptr);
}
ccb->ccb_h.status = CAM_REQ_CMP;
}
}
static cam_status
isp_abort_tgt_ccb(struct ispsoftc *isp, union ccb *ccb)
{
tstate_t *tptr;
struct ccb_hdr_slist *lp;
struct ccb_hdr *curelm;
int found;
union ccb *accb = ccb->cab.abort_ccb;
if (accb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
if (IS_FC(isp) && (accb->ccb_h.target_id !=
((fcparam *) isp->isp_param)->isp_loopid)) {
return (CAM_PATH_INVALID);
} else if (IS_SCSI(isp) && (accb->ccb_h.target_id !=
((sdparam *) isp->isp_param)->isp_initiator_id)) {
return (CAM_PATH_INVALID);
}
}
tptr = get_lun_statep(isp, accb->ccb_h.target_lun);
if (tptr == NULL) {
return (CAM_PATH_INVALID);
}
if (accb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
lp = &tptr->atios;
} else if (accb->ccb_h.func_code == XPT_IMMED_NOTIFY) {
lp = &tptr->inots;
} else {
rls_lun_statep(isp, tptr);
return (CAM_UA_ABORT);
}
curelm = SLIST_FIRST(lp);
found = 0;
if (curelm == &accb->ccb_h) {
found = 1;
SLIST_REMOVE_HEAD(lp, sim_links.sle);
} else {
while(curelm != NULL) {
struct ccb_hdr *nextelm;
nextelm = SLIST_NEXT(curelm, sim_links.sle);
if (nextelm == &accb->ccb_h) {
found = 1;
SLIST_NEXT(curelm, sim_links.sle) =
SLIST_NEXT(nextelm, sim_links.sle);
break;
}
curelm = nextelm;
}
}
rls_lun_statep(isp, tptr);
if (found) {
accb->ccb_h.status = CAM_REQ_ABORTED;
return (CAM_REQ_CMP);
}
return(CAM_PATH_INVALID);
}
static cam_status
isp_target_start_ctio(struct ispsoftc *isp, union ccb *ccb)
{
void *qe;
struct ccb_scsiio *cso = &ccb->csio;
u_int32_t *hp, save_handle;
u_int16_t iptr, optr;
if (isp_getrqentry(isp, &iptr, &optr, &qe)) {
xpt_print_path(ccb->ccb_h.path);
printf("Request Queue Overflow in isp_target_start_ctio\n");
return (CAM_RESRC_UNAVAIL);
}
bzero(qe, QENTRY_LEN);
/*
* We're either moving data or completing a command here.
*/
if (IS_FC(isp)) {
ct2_entry_t *cto = qe;
u_int16_t *ssptr = NULL;
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
cto->ct_header.rqs_entry_count = 1;
cto->ct_iid = cso->init_id;
#ifndef ISP2100_SCCLUN
cto->ct_lun = ccb->ccb_h.target_lun;
#endif
cto->ct_rxid = cso->tag_id;
cto->ct_flags = CT2_CCINCR;
if (cso->dxfer_len == 0) {
cto->ct_flags |= CT2_FLAG_MODE1 | CT2_NO_DATA;
KASSERT(ccb->ccb_h.flags & CAM_SEND_STATUS,
("a CTIO with no data and no status?"));
cto->ct_flags |= CT2_SENDSTATUS;
ssptr = &cto->rsp.m1.ct_scsi_status;
*ssptr = cso->scsi_status;
if ((ccb->ccb_h.flags & CAM_SEND_SENSE) != 0) {
int m = min(cso->sense_len, MAXRESPLEN);
bcopy(&cso->sense_data, cto->rsp.m1.ct_resp, m);
cto->rsp.m1.ct_senselen = m;
cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID;
}
} else {
cto->ct_flags |= CT2_FLAG_MODE0;
if ((cso->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cto->ct_flags |= CT2_DATA_IN;
} else {
cto->ct_flags |= CT2_DATA_OUT;
}
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
ssptr = &cto->rsp.m0.ct_scsi_status;
cto->ct_flags |= CT2_SENDSTATUS;
cto->rsp.m0.ct_scsi_status = cso->scsi_status;
}
ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
}
if (ssptr && cso->resid) {
cto->ct_resid = cso->resid;
if (cso->resid < 0)
*ssptr |= CT2_DATA_OVER;
else
*ssptr |= CT2_DATA_UNDER;
}
if (isp_tdebug > 1 && ssptr &&
(cso->scsi_status != SCSI_STATUS_OK || cso->resid)) {
printf("%s:CTIO2 RX_ID 0x%x SCSI STATUS 0x%x "
"resid %d\n", isp->isp_name, cto->ct_rxid,
cso->scsi_status, cso->resid);
}
hp = &cto->ct_reserved;
} else {
ct_entry_t *cto = qe;
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
cto->ct_header.rqs_entry_count = 1;
cto->ct_iid = cso->init_id;
cto->ct_tgt = ccb->ccb_h.target_id;
cto->ct_lun = ccb->ccb_h.target_lun;
cto->ct_tag_type = cso->tag_action;
cto->ct_tag_val = cso->tag_id;
cto->ct_flags = CT_CCINCR;
if (cso->dxfer_len) {
cto->ct_flags |= CT_NO_DATA;
} else if ((cso->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cto->ct_flags |= CT_DATA_IN;
} else {
cto->ct_flags |= CT_DATA_OUT;
}
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
cto->ct_flags |= CT_SENDSTATUS;
cto->ct_scsi_status = cso->scsi_status;
cto->ct_resid = cso->resid;
}
if (isp_tdebug > 1 &&
(cso->scsi_status != SCSI_STATUS_OK || cso->resid)) {
printf("%s:CTIO SCSI STATUS 0x%x resid %d\n",
isp->isp_name, cso->scsi_status, cso->resid);
}
hp = &cto->ct_reserved;
ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
}
if (isp_save_xs(isp, (ISP_SCSI_XFER_T *)ccb, hp)) {
xpt_print_path(ccb->ccb_h.path);
printf("No XFLIST pointers for isp_target_start_ctio\n");
return (CAM_RESRC_UNAVAIL);
}
/*
* Call the dma setup routines for this entry (and any subsequent
* CTIOs) if there's data to move, and then tell the f/w it's got
* new things to play with. As with ispscsicmd's usage of DMA setup,
* any swizzling is done in the machine dependent layer. Because
* of this, we put the request onto the queue area first in native
* format.
*/
save_handle = *hp;
switch (ISP_DMASETUP(isp, cso, qe, &iptr, optr)) {
case CMD_QUEUED:
MemoryBarrier();
ISP_ADD_REQUEST(isp, iptr);
return (CAM_REQ_INPROG);
case CMD_EAGAIN:
ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
isp_destroy_handle(isp, save_handle);
return (CAM_RESRC_UNAVAIL);
default:
isp_destroy_handle(isp, save_handle);
return (ccb->ccb_h.spriv_field0);
}
}
/*
* Handle ATIO stuff that the generic code can't.
* This means handling CDBs.
*/
static int
isp_handle_platform_atio(struct ispsoftc *isp, at_entry_t *aep)
{
tstate_t *tptr;
int status;
struct ccb_accept_tio *atiop;
/*
* The firmware status (except for the QLTM_SVALID bit)
* indicates why this ATIO was sent to us.
*
* If QLTM_SVALID is set, the firware has recommended Sense Data.
*
* If the DISCONNECTS DISABLED bit is set in the flags field,
* we're still connected on the SCSI bus - i.e. the initiator
* did not set DiscPriv in the identify message. We don't care
* about this so it's ignored.
*/
status = aep->at_status;
if ((status & ~QLTM_SVALID) == AT_PHASE_ERROR) {
/*
* Bus Phase Sequence error. We should have sense data
* suggested by the f/w. I'm not sure quite yet what
* to do about this for CAM.
*/
printf("%s: PHASE ERROR\n", isp->isp_name);
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
if ((status & ~QLTM_SVALID) != AT_CDB) {
printf("%s: bogus atio (0x%x) leaked to platform\n",
isp->isp_name, status);
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
tptr = get_lun_statep(isp, aep->at_lun);
if (tptr == NULL) {
tptr = get_lun_statep(isp, CAM_LUN_WILDCARD);
}
if (tptr == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a BUSY status
* instead. This works out okay because the only
* time we should, in fact, get this, is in the
* case that somebody configured us without the
* blackhole driver, so they get what they deserve.
*/
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
atiop = (struct ccb_accept_tio *) SLIST_FIRST(&tptr->atios);
if (atiop == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a QUEUE FULL status
* instead. This works out okay because the only time we
* should, in fact, get this, is in the case that we've
* run out of ATIOS.
*/
xpt_print_path(tptr->owner);
printf("no ATIOS for lun %d from initiator %d\n",
aep->at_lun, aep->at_iid);
rls_lun_statep(isp, tptr);
if (aep->at_flags & AT_TQAE)
isp_endcmd(isp, aep, SCSI_STATUS_QUEUE_FULL, 0);
else
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
SLIST_REMOVE_HEAD(&tptr->atios, sim_links.sle);
if (tptr == &isp->isp_osinfo.tsdflt) {
atiop->ccb_h.target_id = aep->at_tgt;
atiop->ccb_h.target_lun = aep->at_lun;
}
if (aep->at_flags & AT_NODISC) {
xpt_print_path(tptr->owner);
printf("incoming command that cannot disconnect\n");
}
atiop->init_id = aep->at_iid;
atiop->cdb_len = aep->at_cdblen;
MEMCPY(atiop->cdb_io.cdb_bytes, aep->at_cdb, aep->at_cdblen);
atiop->ccb_h.status = CAM_CDB_RECVD;
if ((atiop->tag_action = aep->at_tag_type) != 0) {
atiop->tag_id = aep->at_tag_val;
atiop->ccb_h.status |= CAM_TAG_ACTION_VALID;
}
xpt_done((union ccb*)atiop);
if (isp_tdebug > 1) {
printf("%s:ATIO CDB=0x%x iid%d->lun%d tag 0x%x ttype 0x%x\n",
isp->isp_name, aep->at_cdb[0] & 0xff, aep->at_iid,
aep->at_lun, aep->at_tag_val & 0xff, aep->at_tag_type);
}
rls_lun_statep(isp, tptr);
return (0);
}
static int
isp_handle_platform_atio2(struct ispsoftc *isp, at2_entry_t *aep)
{
lun_id_t lun;
tstate_t *tptr;
struct ccb_accept_tio *atiop;
/*
* The firmware status (except for the QLTM_SVALID bit)
* indicates why this ATIO was sent to us.
*
* If QLTM_SVALID is set, the firware has recommended Sense Data.
*/
if ((aep->at_status & ~QLTM_SVALID) != AT_CDB) {
printf("%s: bogus atio (0x%x) leaked to platform\n",
isp->isp_name, aep->at_status);
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
#ifdef ISP2100_SCCLUN
lun = aep->at_scclun;
#else
lun = aep->at_lun;
#endif
tptr = get_lun_statep(isp, lun);
if (tptr == NULL) {
tptr = get_lun_statep(isp, CAM_LUN_WILDCARD);
}
if (tptr == NULL) {
#if 0
/* XXX WE REALLY NEED A HARDWIRED SENSE/INQ CTIO TO USE XXX */
u_int32_t ccode = SCSI_STATUS_CHECK_COND | ECMD_SVALID;
#if NTARGBH > 0
/* Not Ready, Unit Not Self-Configured yet.... */
ccode |= (SSD_KEY_NOT_READY << 8) | (0x3E << 24);
#else
/* Illegal Request, Unit Not Self-Configured yet.... */
ccode |= (SSD_KEY_ILLEGAL_REQUEST << 8) | (0x25 << 24);
#endif
#else
u_int32_t ccode = SCSI_STATUS_BUSY;
#endif
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a BUSY status
* instead. This works out okay because the only
* time we should, in fact, get this, is in the
* case that somebody configured us without the
* blackhole driver, so they get what they deserve.
*/
isp_endcmd(isp, aep, ccode, 0);
return (0);
}
atiop = (struct ccb_accept_tio *) SLIST_FIRST(&tptr->atios);
if (atiop == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a QUEUE FULL status
* instead. This works out okay because the only time we
* should, in fact, get this, is in the case that we've
* run out of ATIOS.
*/
xpt_print_path(tptr->owner);
printf("no ATIOS for lun %d from initiator %d\n",
lun, aep->at_iid);
rls_lun_statep(isp, tptr);
if (aep->at_flags & AT_TQAE)
isp_endcmd(isp, aep, SCSI_STATUS_QUEUE_FULL, 0);
else
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
SLIST_REMOVE_HEAD(&tptr->atios, sim_links.sle);
if (tptr == &isp->isp_osinfo.tsdflt) {
atiop->ccb_h.target_id =
((fcparam *)isp->isp_param)->isp_loopid;
atiop->ccb_h.target_lun = lun;
}
atiop->init_id = aep->at_iid;
atiop->cdb_len = ATIO2_CDBLEN;
MEMCPY(atiop->cdb_io.cdb_bytes, aep->at_cdb, ATIO2_CDBLEN);
atiop->ccb_h.status = CAM_CDB_RECVD;
atiop->tag_id = aep->at_rxid;
switch (aep->at_taskflags & ATIO2_TC_ATTR_MASK) {
case ATIO2_TC_ATTR_SIMPLEQ:
atiop->tag_action = MSG_SIMPLE_Q_TAG;
break;
case ATIO2_TC_ATTR_HEADOFQ:
atiop->tag_action = MSG_HEAD_OF_Q_TAG;
break;
case ATIO2_TC_ATTR_ORDERED:
atiop->tag_action = MSG_ORDERED_Q_TAG;
break;
case ATIO2_TC_ATTR_ACAQ: /* ?? */
case ATIO2_TC_ATTR_UNTAGGED:
default:
atiop->tag_action = 0;
break;
}
if (atiop->tag_action != 0) {
atiop->ccb_h.status |= CAM_TAG_ACTION_VALID;
}
xpt_done((union ccb*)atiop);
if (isp_tdebug > 1) {
printf("%s:ATIO2 RX_ID 0x%x CDB=0x%x iid%d->lun%d tattr 0x%x\n",
isp->isp_name, aep->at_rxid & 0xffff, aep->at_cdb[0] & 0xff,
aep->at_iid, lun, aep->at_taskflags);
}
rls_lun_statep(isp, tptr);
return (0);
}
static int
isp_handle_platform_ctio(struct ispsoftc *isp, void * arg)
{
union ccb *ccb;
int sentstatus, ok;
/*
* CTIO and CTIO2 are close enough....
*/
ccb = (union ccb *) isp_find_xs(isp, ((ct_entry_t *)arg)->ct_reserved);
KASSERT((ccb != NULL), ("null ccb in isp_handle_platform_ctio"));
isp_destroy_handle(isp, ((ct_entry_t *)arg)->ct_reserved);
if (IS_FC(isp)) {
ct2_entry_t *ct = arg;
sentstatus = ct->ct_flags & CT2_SENDSTATUS;
ok = (ct->ct_status & ~QLTM_SVALID) == CT_OK;
if (ok && ccb->ccb_h.flags & CAM_SEND_SENSE) {
ccb->ccb_h.status |= CAM_SENT_SENSE;
}
if (isp_tdebug > 1) {
printf("%s:CTIO2 RX_ID 0x%x sts 0x%x flg 0x%x sns "
"%d FIN\n", isp->isp_name, ct->ct_rxid,
ct->ct_status, ct->ct_flags,
(ccb->ccb_h.status & CAM_SENT_SENSE) != 0);
}
} else {
ct_entry_t *ct = arg;
sentstatus = ct->ct_flags & CT_SENDSTATUS;
ok = (ct->ct_status & ~QLTM_SVALID) == CT_OK;
if (isp_tdebug > 1) {
printf("%s:CTIO tag 0x%x sts 0x%x flg 0x%x FIN\n",
isp->isp_name, ct->ct_tag_val, ct->ct_status,
ct->ct_flags);
}
}
/*
* We're here either because data transfers are done (and
* it's time to send a final status CTIO) or because the final
* status CTIO is done. We don't get called for all intermediate
* CTIOs that happen for a large data transfer.
*
* In any case, for this platform, the upper layers figure out
* what to do next, so all we do here is collect status and
* pass information along.
*/
if (sentstatus) {
/*
* Data transfer done. See if all went okay.
*/
if (ok) {
ccb->csio.resid = 0;
} else {
ccb->csio.resid = ccb->csio.dxfer_len;
}
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
ccb->ccb_h.status |= CAM_REQ_CMP;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_RESOURCE) {
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_RESOURCE;
if (isp->isp_osinfo.simqfrozen == 0) {
if ((ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
IDPRINTF(3, ("%s: isp_done -> relsimq\n",
isp->isp_name));
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
} else {
IDPRINTF(3, ("%s: isp_done -> devq frozen\n",
isp->isp_name));
}
} else {
IDPRINTF(3, ("%s: isp_done -> simqfrozen = %x\n",
isp->isp_name, isp->isp_osinfo.simqfrozen));
}
}
xpt_done(ccb);
return (0);
}
#endif
static void
isp_cam_async(void *cbarg, u_int32_t code, struct cam_path *path, void *arg)
{
struct cam_sim *sim;
struct ispsoftc *isp;
sim = (struct cam_sim *)cbarg;
isp = (struct ispsoftc *) cam_sim_softc(sim);
switch (code) {
case AC_LOST_DEVICE:
if (IS_SCSI(isp)) {
u_int16_t oflags, nflags;
sdparam *sdp = isp->isp_param;
int s, rvf, tgt;
tgt = xpt_path_target_id(path);
rvf = ISP_FW_REVX(isp->isp_fwrev);
s = splcam();
sdp += cam_sim_bus(sim);
isp->isp_update |= (1 << cam_sim_bus(sim));
nflags = DPARM_SAFE_DFLT;
if (rvf >= ISP_FW_REV(7, 55, 0) ||
(ISP_FW_REV(4, 55, 0) <= rvf &&
(rvf < ISP_FW_REV(5, 0, 0)))) {
nflags |= DPARM_NARROW | DPARM_ASYNC;
}
oflags = sdp->isp_devparam[tgt].dev_flags;
sdp->isp_devparam[tgt].dev_flags = nflags;
sdp->isp_devparam[tgt].dev_update = 1;
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS, NULL);
sdp->isp_devparam[tgt].dev_flags = oflags;
(void) splx(s);
}
break;
default:
printf("%s: isp_attach Async Code 0x%x\n", isp->isp_name, code);
break;
}
}
static void
isp_poll(struct cam_sim *sim)
{
isp_intr((struct ispsoftc *) cam_sim_softc(sim));
}
static void
isp_relsim(void *arg)
{
struct ispsoftc *isp = arg;
int s = splcam();
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_TIMED) {
int wasfrozen = isp->isp_osinfo.simqfrozen & SIMQFRZ_TIMED;
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_TIMED;
if (wasfrozen && isp->isp_osinfo.simqfrozen == 0) {
xpt_release_simq(isp->isp_sim, 1);
IDPRINTF(3, ("%s: timed relsimq\n", isp->isp_name));
}
}
splx(s);
}
static void
isp_action(struct cam_sim *sim, union ccb *ccb)
{
int s, bus, tgt, error;
struct ispsoftc *isp;
struct ccb_trans_settings *cts;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("isp_action\n"));
isp = (struct ispsoftc *)cam_sim_softc(sim);
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = isp;
if (isp->isp_state != ISP_RUNSTATE &&
ccb->ccb_h.func_code == XPT_SCSI_IO) {
s = splcam();
DISABLE_INTS(isp);
isp_init(isp);
if (isp->isp_state != ISP_INITSTATE) {
(void) splx(s);
/*
* Lie. Say it was a selection timeout.
*/
ccb->ccb_h.status = CAM_SEL_TIMEOUT;
ccb->ccb_h.status |= CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, 1);
xpt_done(ccb);
return;
}
isp->isp_state = ISP_RUNSTATE;
ENABLE_INTS(isp);
(void) splx(s);
}
IDPRINTF(4, ("%s: isp_action code %x\n", isp->isp_name,
ccb->ccb_h.func_code));
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO: /* Execute the requested I/O operation */
/*
* Do a couple of preliminary checks...
*/
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) {
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
#ifdef DIAGNOSTIC
if (ccb->ccb_h.target_id > (ISP_MAX_TARGETS(isp) - 1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
} else if (ccb->ccb_h.target_lun > (ISP_MAX_LUNS(isp) - 1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
}
if (ccb->ccb_h.status == CAM_PATH_INVALID) {
printf("%s: invalid tgt/lun (%d.%d) in XPT_SCSI_IO\n",
isp->isp_name, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun);
xpt_done(ccb);
break;
}
#endif
((struct ccb_scsiio *) ccb)->scsi_status = SCSI_STATUS_OK;
s = splcam();
DISABLE_INTS(isp);
error = ispscsicmd((ISP_SCSI_XFER_T *) ccb);
ENABLE_INTS(isp);
splx(s);
switch (error) {
case CMD_QUEUED:
ccb->ccb_h.status |= CAM_SIM_QUEUED;
break;
case CMD_RQLATER:
if (isp->isp_osinfo.simqfrozen == 0) {
IDPRINTF(3, ("%s: RQLATER freeze simq\n",
isp->isp_name));
isp->isp_osinfo.simqfrozen |= SIMQFRZ_TIMED;
timeout(isp_relsim, isp, 500);
xpt_freeze_simq(sim, 1);
}
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
break;
case CMD_EAGAIN:
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
IDPRINTF(3, ("%s: EAGAIN freeze simq\n",
isp->isp_name));
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_RESOURCE;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
break;
case CMD_COMPLETE:
isp_done((struct ccb_scsiio *) ccb);
break;
default:
printf("%s: What's this? 0x%x at %d in file %s\n",
isp->isp_name, error, __LINE__, __FILE__);
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
xpt_done(ccb);
}
break;
#ifdef ISP_TARGET_MODE
case XPT_EN_LUN: /* Enable LUN as a target */
isp_en_lun(isp, ccb);
xpt_done(ccb);
break;
case XPT_NOTIFY_ACK: /* recycle notify ack */
xpt_print_path(ccb->ccb_h.path);
printf("notify ack\n");
case XPT_IMMED_NOTIFY: /* Add Immediate Notify Resource */
case XPT_ACCEPT_TARGET_IO: /* Add Accept Target IO Resource */
{
tstate_t *tptr = get_lun_statep(isp, ccb->ccb_h.target_lun);
if (tptr == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
xpt_done(ccb);
break;
}
s = splsoftcam();
if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
SLIST_INSERT_HEAD(&tptr->atios,
&ccb->ccb_h, sim_links.sle);
} else {
SLIST_INSERT_HEAD(&tptr->inots, &ccb->ccb_h,
sim_links.sle);
}
splx(s);
rls_lun_statep(isp, tptr);
ccb->ccb_h.status = CAM_REQ_INPROG;
break;
}
case XPT_CONT_TARGET_IO:
{
s = splcam();
ccb->ccb_h.status = isp_target_start_ctio(isp, ccb);
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
xpt_print_path(ccb->ccb_h.path);
printf("XPT_CONT_TARGET_IO freeze simq\n");
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_RESOURCE;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
} else {
ccb->ccb_h.status |= CAM_SIM_QUEUED;
}
splx(s);
break;
}
#endif
case XPT_RESET_DEV: /* BDR the specified SCSI device */
bus = cam_sim_bus(xpt_path_sim(ccb->ccb_h.path));
tgt = ccb->ccb_h.target_id;
tgt |= (bus << 16);
s = splcam();
error = isp_control(isp, ISPCTL_RESET_DEV, &tgt);
(void) splx(s);
if (error) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_ABORT: /* Abort the specified CCB */
{
union ccb *accb = ccb->cab.abort_ccb;
switch (accb->ccb_h.func_code) {
#ifdef ISP_TARGET_MODE
case XPT_ACCEPT_TARGET_IO:
case XPT_IMMED_NOTIFY:
ccb->ccb_h.status = isp_abort_tgt_ccb(isp, ccb);
break;
case XPT_CONT_TARGET_IO:
PRINTF("%s: cannot abort CTIOs yet\n", isp->isp_name);
ccb->ccb_h.status = CAM_UA_ABORT;
break;
#endif
case XPT_SCSI_IO:
s = splcam();
error = isp_control(isp, ISPCTL_ABORT_CMD, ccb);
(void) splx(s);
if (error) {
ccb->ccb_h.status = CAM_UA_ABORT;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
break;
}
case XPT_SET_TRAN_SETTINGS: /* Nexus Settings */
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
s = splcam();
if (IS_SCSI(isp)) {
sdparam *sdp = isp->isp_param;
u_int16_t *dptr;
bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
sdp += bus;
#if 0
if (cts->flags & CCB_TRANS_CURRENT_SETTINGS)
dptr = &sdp->isp_devparam[tgt].cur_dflags;
else
dptr = &sdp->isp_devparam[tgt].dev_flags;
#else
/*
* We always update (internally) from dev_flags
* so any request to change settings just gets
* vectored to that location.
*/
dptr = &sdp->isp_devparam[tgt].dev_flags;
#endif
/*
* Note that these operations affect the
* the goal flags (dev_flags)- not
* the current state flags. Then we mark
* things so that the next operation to
* this HBA will cause the update to occur.
*/
if (cts->valid & CCB_TRANS_DISC_VALID) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) {
*dptr |= DPARM_DISC;
} else {
*dptr &= ~DPARM_DISC;
}
}
if (cts->valid & CCB_TRANS_TQ_VALID) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) {
*dptr |= DPARM_TQING;
} else {
*dptr &= ~DPARM_TQING;
}
}
if (cts->valid & CCB_TRANS_BUS_WIDTH_VALID) {
switch (cts->bus_width) {
case MSG_EXT_WDTR_BUS_16_BIT:
*dptr |= DPARM_WIDE;
break;
default:
*dptr &= ~DPARM_WIDE;
}
}
/*
* Any SYNC RATE of nonzero and SYNC_OFFSET
* of nonzero will cause us to go to the
* selected (from NVRAM) maximum value for
* this device. At a later point, we'll
* allow finer control.
*/
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) &&
(cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) &&
(cts->sync_offset > 0)) {
*dptr |= DPARM_SYNC;
} else {
*dptr &= ~DPARM_SYNC;
}
*dptr |= DPARM_SAFE_DFLT;
if (bootverbose || isp->isp_dblev >= 3)
printf("%s: %d.%d set %s period 0x%x offset "
"0x%x flags 0x%x\n", isp->isp_name, bus,
tgt,
(cts->flags & CCB_TRANS_CURRENT_SETTINGS)?
"current" : "user",
sdp->isp_devparam[tgt].sync_period,
sdp->isp_devparam[tgt].sync_offset,
sdp->isp_devparam[tgt].dev_flags);
sdp->isp_devparam[tgt].dev_update = 1;
isp->isp_update |= (1 << bus);
}
(void) splx(s);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
if (IS_FC(isp)) {
/*
* a lot of normal SCSI things don't make sense.
*/
cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
/*
* How do you measure the width of a high
* speed serial bus? Well, in bytes.
*
* Offset and period make no sense, though, so we set
* (above) a 'base' transfer speed to be gigabit.
*/
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
} else {
sdparam *sdp = isp->isp_param;
u_int16_t dval, pval, oval;
int bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
sdp += bus;
if (cts->flags & CCB_TRANS_CURRENT_SETTINGS) {
s = splcam();
sdp->isp_devparam[tgt].dev_refresh = 1;
isp->isp_update |= (1 << bus);
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS,
NULL);
(void) splx(s);
dval = sdp->isp_devparam[tgt].cur_dflags;
oval = sdp->isp_devparam[tgt].cur_offset;
pval = sdp->isp_devparam[tgt].cur_period;
} else {
dval = sdp->isp_devparam[tgt].dev_flags;
oval = sdp->isp_devparam[tgt].sync_offset;
pval = sdp->isp_devparam[tgt].sync_period;
}
s = splcam();
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if (dval & DPARM_DISC) {
cts->flags |= CCB_TRANS_DISC_ENB;
}
if (dval & DPARM_TQING) {
cts->flags |= CCB_TRANS_TAG_ENB;
}
if (dval & DPARM_WIDE) {
cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
cts->valid = CCB_TRANS_BUS_WIDTH_VALID |
CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if ((dval & DPARM_SYNC) && oval != 0) {
cts->sync_period = pval;
cts->sync_offset = oval;
cts->valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
splx(s);
if (bootverbose || isp->isp_dblev >= 3)
printf("%s: %d.%d get %s period 0x%x offset "
"0x%x flags 0x%x\n", isp->isp_name, bus,
tgt,
(cts->flags & CCB_TRANS_CURRENT_SETTINGS)?
"current" : "user", pval, oval, dval);
}
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t secs_per_cylinder;
u_int32_t size_mb;
ccg = &ccb->ccg;
if (ccg->block_size == 0) {
printf("%s: %d.%d XPT_CALC_GEOMETRY block size 0?\n",
isp->isp_name, ccg->ccb_h.target_id,
ccg->ccb_h.target_lun);
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
size_mb = ccg->volume_size /((1024L * 1024L) / ccg->block_size);
if (size_mb > 1024) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified bus */
bus = cam_sim_bus(sim);
s = splcam();
error = isp_control(isp, ISPCTL_RESET_BUS, &bus);
(void) splx(s);
if (error)
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
else {
if (cam_sim_bus(sim) && isp->isp_path2 != NULL)
xpt_async(AC_BUS_RESET, isp->isp_path2, NULL);
else if (isp->isp_path != NULL)
xpt_async(AC_BUS_RESET, isp->isp_path, NULL);
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_TERM_IO: /* Terminate the I/O process */
/* Does this need to be implemented? */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1;
#ifdef ISP_TARGET_MODE
cpi->target_sprt = PIT_PROCESSOR | PIT_DISCONNECT | PIT_TERM_IO;
#else
cpi->target_sprt = 0;
#endif
cpi->hba_eng_cnt = 0;
cpi->max_target = ISP_MAX_TARGETS(isp) - 1;
cpi->max_lun = ISP_MAX_LUNS(isp) - 1;
cpi->bus_id = cam_sim_bus(sim);
if (IS_FC(isp)) {
cpi->hba_misc = PIM_NOBUSRESET;
/*
* Because our loop ID can shift from time to time,
* make our initiator ID out of range of our bus.
*/
cpi->initiator_id = cpi->max_target + 1;
Add a number of interrelated CAM feature enhancements and bug fixes. NOTE: These changes will require recompilation of any userland applications, like cdrecord, xmcd, etc., that use the CAM passthrough interface. A make world is recommended. camcontrol.[c8]: - We now support two new commands, "tags" and "negotiate". - The tags commands allows users to view the number of tagged openings for a device as well as a number of other related parameters, and it allows users to set tagged openings for a device. - The negotiate command allows users to enable and disable disconnection and tagged queueing, set sync rates, offsets and bus width. Note that not all of those features are available for all controllers. Only the adv, ahc, and ncr drivers fully support all of the features at this point. Some cards do not allow the setting of sync rates, offsets and the like, and some of the drivers don't have any facilities to do so. Some drivers, like the adw driver, only support enabling or disabling sync negotiation, but do not support setting sync rates. - new description in the camcontrol man page of how to format a disk - cleanup of the camcontrol inquiry command - add support in the 'devlist' command for skipping unconfigured devices if -v was not specified on the command line. - make use of the new base_transfer_speed in the path inquiry CCB. - fix CCB bzero cases cam_xpt.c, cam_sim.[ch], cam_ccb.h: - new flags on many CCB function codes to designate whether they're non-immediate, use a user-supplied CCB, and can only be passed from userland programs via the xpt device. Use these flags in the transport layer and pass driver to categorize CCBs. - new flag in the transport layer device matching code for device nodes that indicates whether a device is unconfigured - bump the CAM version from 0x10 to 0x11 - Change the CAM ioctls to use the version as their group code, so we can force users to recompile code even when the CCB size doesn't change. - add + fill in a new value in the path inquiry CCB, base_transfer_speed. Remove a corresponding field from the cam_sim structure, and add code to every SIM to set this field to the proper value. - Fix the set transfer settings code in the transport layer. scsi_cd.c: - make some variables volatile instead of just casting them in various places - fix a race condition in the changer code - attach unless we get a "logical unit not supported" error. This should fix all of the cases where people have devices that return weird errors when they don't have media in the drive. scsi_da.c: - attach unless we get a "logical unit not supported" error scsi_pass.c: - for immediate CCBs, just malloc a CCB to send the user request in. This gets rid of the 'held' count problem in camcontrol tags. scsi_pass.h: - change the CAM ioctls to use the CAM version as their group code. adv driver: - Allow changing the sync rate and offset separately. adw driver - Allow changing the sync rate and offset separately. aha driver: - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs. ahc driver: - Allow setting offset and sync rate separately bt driver: - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs. NCR driver: - Fix the ultra/ultra 2 negotiation bug - allow setting both the sync rate and offset separately Other HBA drivers: - Put code in to set the base_transfer_speed field for XPT_GET_TRAN_SETTINGS CCBs. Reviewed by: gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
/*
* Set base transfer capabilities for Fibre Channel.
* Technically not correct because we don't know
* what media we're running on top of- but we'll
* look good if we always say 100MB/s.
*/
cpi->base_transfer_speed = 100000;
cpi->hba_inquiry = PI_TAG_ABLE;
} else {
sdparam *sdp = isp->isp_param;
sdp += cam_sim_bus(xpt_path_sim(cpi->ccb_h.path));
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->hba_misc = 0;
cpi->initiator_id = sdp->isp_initiator_id;
Add a number of interrelated CAM feature enhancements and bug fixes. NOTE: These changes will require recompilation of any userland applications, like cdrecord, xmcd, etc., that use the CAM passthrough interface. A make world is recommended. camcontrol.[c8]: - We now support two new commands, "tags" and "negotiate". - The tags commands allows users to view the number of tagged openings for a device as well as a number of other related parameters, and it allows users to set tagged openings for a device. - The negotiate command allows users to enable and disable disconnection and tagged queueing, set sync rates, offsets and bus width. Note that not all of those features are available for all controllers. Only the adv, ahc, and ncr drivers fully support all of the features at this point. Some cards do not allow the setting of sync rates, offsets and the like, and some of the drivers don't have any facilities to do so. Some drivers, like the adw driver, only support enabling or disabling sync negotiation, but do not support setting sync rates. - new description in the camcontrol man page of how to format a disk - cleanup of the camcontrol inquiry command - add support in the 'devlist' command for skipping unconfigured devices if -v was not specified on the command line. - make use of the new base_transfer_speed in the path inquiry CCB. - fix CCB bzero cases cam_xpt.c, cam_sim.[ch], cam_ccb.h: - new flags on many CCB function codes to designate whether they're non-immediate, use a user-supplied CCB, and can only be passed from userland programs via the xpt device. Use these flags in the transport layer and pass driver to categorize CCBs. - new flag in the transport layer device matching code for device nodes that indicates whether a device is unconfigured - bump the CAM version from 0x10 to 0x11 - Change the CAM ioctls to use the version as their group code, so we can force users to recompile code even when the CCB size doesn't change. - add + fill in a new value in the path inquiry CCB, base_transfer_speed. Remove a corresponding field from the cam_sim structure, and add code to every SIM to set this field to the proper value. - Fix the set transfer settings code in the transport layer. scsi_cd.c: - make some variables volatile instead of just casting them in various places - fix a race condition in the changer code - attach unless we get a "logical unit not supported" error. This should fix all of the cases where people have devices that return weird errors when they don't have media in the drive. scsi_da.c: - attach unless we get a "logical unit not supported" error scsi_pass.c: - for immediate CCBs, just malloc a CCB to send the user request in. This gets rid of the 'held' count problem in camcontrol tags. scsi_pass.h: - change the CAM ioctls to use the CAM version as their group code. adv driver: - Allow changing the sync rate and offset separately. adw driver - Allow changing the sync rate and offset separately. aha driver: - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs. ahc driver: - Allow setting offset and sync rate separately bt driver: - Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs. NCR driver: - Fix the ultra/ultra 2 negotiation bug - allow setting both the sync rate and offset separately Other HBA drivers: - Put code in to set the base_transfer_speed field for XPT_GET_TRAN_SETTINGS CCBs. Reviewed by: gibbs, mjacob (isp), imp (aha)
1999-05-06 20:16:39 +00:00
cpi->base_transfer_speed = 3300;
}
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Qlogic", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
#define ISPDDB (CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
void
isp_done(struct ccb_scsiio *sccb)
{
struct ispsoftc *isp = XS_ISP(sccb);
if (XS_NOERR(sccb))
XS_SETERR(sccb, CAM_REQ_CMP);
sccb->ccb_h.status &= ~CAM_STATUS_MASK;
sccb->ccb_h.status |= sccb->ccb_h.spriv_field0;
if ((sccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
(sccb->scsi_status != SCSI_STATUS_OK)) {
sccb->ccb_h.status &= ~CAM_STATUS_MASK;
if ((sccb->scsi_status == SCSI_STATUS_CHECK_COND) &&
(sccb->ccb_h.status & CAM_AUTOSNS_VALID) == 0) {
sccb->ccb_h.status |= CAM_AUTOSENSE_FAIL;
} else {
sccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
}
}
sccb->ccb_h.status &= ~CAM_SIM_QUEUED;
if ((sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
sccb->ccb_h.status |= CAM_DEV_QFRZN;
xpt_freeze_devq(sccb->ccb_h.path, 1);
if (sccb->scsi_status != SCSI_STATUS_OK)
IDPRINTF(3, ("%s: fdevq %d.%d %x %x\n",
isp->isp_name, sccb->ccb_h.target_id,
sccb->ccb_h.target_lun, sccb->ccb_h.status,
sccb->scsi_status));
}
}
/*
* If we were frozen waiting resources, clear that we were frozen
* waiting for resources. If we are no longer frozen, and the devq
* isn't frozen, mark the completing CCB to have the XPT layer
* release the simq.
*/
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_RESOURCE) {
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_RESOURCE;
if (isp->isp_osinfo.simqfrozen == 0) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
IDPRINTF(3, ("%s: isp_done -> relsimq\n",
isp->isp_name));
sccb->ccb_h.status |= CAM_RELEASE_SIMQ;
} else {
IDPRINTF(3, ("%s: isp_done -> devq frozen\n",
isp->isp_name));
}
} else {
IDPRINTF(3, ("%s: isp_done -> simqfrozen = %x\n",
isp->isp_name, isp->isp_osinfo.simqfrozen));
}
}
if (CAM_DEBUGGED(sccb->ccb_h.path, ISPDDB) &&
(sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
xpt_print_path(sccb->ccb_h.path);
printf("cam completion status 0x%x\n", sccb->ccb_h.status);
}
xpt_done((union ccb *) sccb);
}
int
isp_async(struct ispsoftc *isp, ispasync_t cmd, void *arg)
{
int bus, rv = 0;
switch (cmd) {
case ISPASYNC_NEW_TGT_PARAMS:
{
int flags, tgt;
sdparam *sdp = isp->isp_param;
struct ccb_trans_settings neg;
struct cam_path *tmppath;
tgt = *((int *)arg);
bus = (tgt >> 16) & 0xffff;
tgt &= 0xffff;
sdp += bus;
if (xpt_create_path(&tmppath, NULL,
cam_sim_path(bus? isp->isp_sim2 : isp->isp_sim),
tgt, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_print_path(isp->isp_path);
printf("isp_async cannot make temp path for "
"target %d bus %d\n", tgt, bus);
rv = -1;
break;
}
flags = sdp->isp_devparam[tgt].cur_dflags;
neg.valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if (flags & DPARM_DISC) {
neg.flags |= CCB_TRANS_DISC_ENB;
}
if (flags & DPARM_TQING) {
neg.flags |= CCB_TRANS_TAG_ENB;
}
neg.valid |= CCB_TRANS_BUS_WIDTH_VALID;
neg.bus_width = (flags & DPARM_WIDE)?
MSG_EXT_WDTR_BUS_8_BIT : MSG_EXT_WDTR_BUS_16_BIT;
neg.sync_period = sdp->isp_devparam[tgt].cur_period;
neg.sync_offset = sdp->isp_devparam[tgt].cur_offset;
if (flags & DPARM_SYNC) {
neg.valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
IDPRINTF(3, ("%s: NEW_TGT_PARAMS bus %d tgt %d period "
"0x%x offset 0x%x flags 0x%x\n", isp->isp_name,
bus, tgt, neg.sync_period, neg.sync_offset, flags));
xpt_setup_ccb(&neg.ccb_h, tmppath, 1);
xpt_async(AC_TRANSFER_NEG, tmppath, &neg);
xpt_free_path(tmppath);
break;
}
case ISPASYNC_BUS_RESET:
bus = *((int *)arg);
printf("%s: SCSI bus reset on bus %d detected\n",
isp->isp_name, bus);
if (bus > 0 && isp->isp_path2) {
xpt_async(AC_BUS_RESET, isp->isp_path2, NULL);
} else if (isp->isp_path) {
xpt_async(AC_BUS_RESET, isp->isp_path, NULL);
}
break;
case ISPASYNC_LOOP_DOWN:
if (isp->isp_path) {
if (isp->isp_osinfo.simqfrozen == 0) {
IDPRINTF(3, ("%s: loop down freeze simq\n",
isp->isp_name));
xpt_freeze_simq(isp->isp_sim, 1);
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
}
printf("%s: Loop DOWN\n", isp->isp_name);
break;
case ISPASYNC_LOOP_UP:
if (isp->isp_path) {
int wasfrozen =
isp->isp_osinfo.simqfrozen & SIMQFRZ_LOOPDOWN;
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_LOOPDOWN;
if (wasfrozen && isp->isp_osinfo.simqfrozen == 0) {
xpt_release_simq(isp->isp_sim, 1);
IDPRINTF(3, ("%s: loop up release simq\n",
isp->isp_name));
}
}
printf("%s: Loop UP\n", isp->isp_name);
break;
case ISPASYNC_PDB_CHANGED:
{
const char *fmt = "%s: Target %d (Loop 0x%x) Port ID 0x%x "
"role %s %s\n Port WWN 0x%08x%08x\n Node WWN 0x%08x%08x\n";
const static char *roles[4] = {
"(none)", "Target", "Initiator", "Target/Initiator"
};
char *ptr;
fcparam *fcp = isp->isp_param;
int tgt = *((int *) arg);
struct lportdb *lp = &fcp->portdb[tgt];
if (lp->valid) {
ptr = "arrived";
} else {
ptr = "disappeared";
}
printf(fmt, isp->isp_name, tgt, lp->loopid, lp->portid,
roles[lp->roles & 0x3], ptr,
(u_int32_t) (lp->port_wwn >> 32),
(u_int32_t) (lp->port_wwn & 0xffffffffLL),
(u_int32_t) (lp->node_wwn >> 32),
(u_int32_t) (lp->node_wwn & 0xffffffffLL));
break;
}
case ISPASYNC_CHANGE_NOTIFY:
printf("%s: Name Server Database Changed\n", isp->isp_name);
break;
#ifdef ISP2100_FABRIC
case ISPASYNC_FABRIC_DEV:
{
int target;
struct lportdb *lp;
char *pt;
sns_ganrsp_t *resp = (sns_ganrsp_t *) arg;
u_int32_t portid;
u_int64_t wwpn, wwnn;
fcparam *fcp = isp->isp_param;
rv = -1;
portid =
(((u_int32_t) resp->snscb_port_id[0]) << 16) |
(((u_int32_t) resp->snscb_port_id[1]) << 8) |
(((u_int32_t) resp->snscb_port_id[2]));
wwpn =
(((u_int64_t)resp->snscb_portname[0]) << 56) |
(((u_int64_t)resp->snscb_portname[1]) << 48) |
(((u_int64_t)resp->snscb_portname[2]) << 40) |
(((u_int64_t)resp->snscb_portname[3]) << 32) |
(((u_int64_t)resp->snscb_portname[4]) << 24) |
(((u_int64_t)resp->snscb_portname[5]) << 16) |
(((u_int64_t)resp->snscb_portname[6]) << 8) |
(((u_int64_t)resp->snscb_portname[7]));
wwnn =
(((u_int64_t)resp->snscb_nodename[0]) << 56) |
(((u_int64_t)resp->snscb_nodename[1]) << 48) |
(((u_int64_t)resp->snscb_nodename[2]) << 40) |
(((u_int64_t)resp->snscb_nodename[3]) << 32) |
(((u_int64_t)resp->snscb_nodename[4]) << 24) |
(((u_int64_t)resp->snscb_nodename[5]) << 16) |
(((u_int64_t)resp->snscb_nodename[6]) << 8) |
(((u_int64_t)resp->snscb_nodename[7]));
if (portid == 0 || wwpn == 0) {
rv = 0;
break;
}
switch (resp->snscb_port_type) {
case 1:
pt = " N_Port";
break;
case 2:
pt = " NL_Port";
break;
case 3:
pt = "F/NL_Port";
break;
case 0x7f:
pt = " Nx_Port";
break;
case 0x81:
pt = " F_port";
break;
case 0x82:
pt = " FL_Port";
break;
case 0x84:
pt = " E_port";
break;
default:
pt = "?";
break;
}
CFGPRINTF("%s: %s @ 0x%x, Node 0x%08x%08x Port %08x%08x\n",
isp->isp_name, pt, portid,
((u_int32_t) (wwnn >> 32)), ((u_int32_t) wwnn),
((u_int32_t) (wwpn >> 32)), ((u_int32_t) wwpn));
#if 0
if ((resp->snscb_fc4_types[1] & 0x1) == 0) {
rv = 0;
printf("Types 0..3: 0x%x 0x%x 0x%x 0x%x\n",
resp->snscb_fc4_types[0], resp->snscb_fc4_types[1],
resp->snscb_fc4_types[3], resp->snscb_fc4_types[3]);
break;
}
#endif
for (target = FC_SNS_ID+1; target < MAX_FC_TARG; target++) {
lp = &fcp->portdb[target];
if (lp->port_wwn == wwpn && lp->node_wwn == wwnn)
break;
}
if (target < MAX_FC_TARG) {
rv = 0;
break;
}
for (target = FC_SNS_ID+1; target < MAX_FC_TARG; target++) {
lp = &fcp->portdb[target];
if (lp->port_wwn == 0)
break;
}
if (target == MAX_FC_TARG) {
printf("%s: no more space for fabric devices\n",
isp->isp_name);
break;
}
lp->node_wwn = wwnn;
lp->port_wwn = wwpn;
lp->portid = portid;
rv = 0;
break;
}
#endif
#ifdef ISP_TARGET_MODE
case ISPASYNC_TARGET_MESSAGE:
{
tmd_msg_t *mp = arg;
ITDEBUG(2, ("%s: bus %d iid %d tgt %d lun %d ttype %x tval %x"
" msg[0]=0x%x\n", isp->isp_name, mp->nt_bus,
(int) mp->nt_iid, (int) mp->nt_tgt, (int) mp->nt_lun,
mp->nt_tagtype, mp->nt_tagval, mp->nt_msg[0]));
break;
}
case ISPASYNC_TARGET_EVENT:
{
tmd_event_t *ep = arg;
ITDEBUG(2, ("%s: bus %d event code 0x%x\n", isp->isp_name,
ep->ev_bus, ep->ev_event));
break;
}
case ISPASYNC_TARGET_ACTION:
switch (((isphdr_t *)arg)->rqs_entry_type) {
default:
printf("%s: event 0x%x for unhandled target action\n",
isp->isp_name, ((isphdr_t *)arg)->rqs_entry_type);
break;
case RQSTYPE_ATIO:
rv = isp_handle_platform_atio(isp, (at_entry_t *) arg);
break;
case RQSTYPE_ATIO2:
rv = isp_handle_platform_atio2(isp, (at2_entry_t *)arg);
break;
case RQSTYPE_CTIO2:
case RQSTYPE_CTIO:
rv = isp_handle_platform_ctio(isp, arg);
break;
case RQSTYPE_ENABLE_LUN:
case RQSTYPE_MODIFY_LUN:
isp_cv_signal_rqe(isp, ((lun_entry_t *)arg)->le_status);
break;
}
break;
#endif
default:
PRINTF("%s: unknown isp_async event %d\n", isp->isp_name, cmd);
rv = -1;
break;
}
return (rv);
}
/*
* Locks are held before coming here.
*/
void
isp_uninit(struct ispsoftc *isp)
{
ISP_WRITE(isp, HCCR, HCCR_CMD_RESET);
DISABLE_INTS(isp);
}