talexander
/
freebsd_amp_hwpstate
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd_amp_hwpstate/usr.sbin/ypserv/Makefile

42 lines
1.1 KiB
Makefile
Raw Normal View History

Fix a bug in the database handle caching. This has to do with the way the underlying database code works. When dealing with first/next queries, you have the notion of a database 'cursor,' which is essentially a file pointer for the database. To select the first entry, you do a fetch with the R_FIRST flag set, then you can use the R_NEXT flag to enumerate the other entries in the database. Unfortunately, doing a direct fetch with no flag does _not_ set the 'cursor,' so you can't do a direct fetch and then enumerate the table from there. The bug is that cached handles generated as the result of a YPPROC_MATCH were being treated as though they were the same as handles generated by a YPPROC_FIRST, which is not the case. The manifestation is that if you do a 'ypmatch first-key-in-map map' followed by a yp_first()/yp_next() pair, the yp_first() and yp_next() both return the first key in the table, which makes the entry appear to be duplicated. A couple smaller things since I'm here: - yp_main.c and yp_error.c both have a global 'int debug' in them. For some reason, our cc/ld doesn't flag this as a multiply defined symbol even though it should. Removed the declaration from yp_main.c; we want the one in yp_error.c. - The Makefile wasn't installing ypinit in the right place.
1998-02-11 19:15:32 +00:00
# $Id: Makefile,v 1.12 1997/11/10 22:17:09 wpaul Exp $
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
PROG= ypserv
SRCS= yp_svc.c yp_server.c yp_dblookup.c yp_dnslookup.c \
Big round o changes: - yp_dblookup.c: Create non-DB specific database access functions. Using these allows access to the underlying database functions without needing explicit knowledge of Berkeley DB. (These are used only when DB_CACHE is #defined. Other programs that use the non-caching functions (yp_mkdb, ypxfr, yppush, rpc.yppasswdd) shouldn't notice the difference.) - yp_dnslookup: Implement async DNS lookups. We send our own DNS requests using UDP and put the request in a queue. When the response arrives, we use the ID in the header to find the corresponsing queue entry and then send the response to the client. We can go about our business and handle other YP requests in the meantime. This way, we can deal with time consuming DNS requests without blocking and without forking. - yp_server.c: Convert to using new non-DB-specific database access functions. This simplifies the code a bit and removes the need for this module to know anything about Berkeley DB. Also convert the ypproc_match_2_svc() function to use the async DNS lookup routines. - yp_main.c: tweak yp_svc_run() to add the resolver socket to the set of descriptors monitored in the select() loop. Also add a timeout to select(); we may get stale DNS requests stuck in the queue which we want to invalidate after a while. If the timeout hits, we decrement the ttl on all pending DNS requests and nuke those requests that aren't handled before ttl hits zero. - yp_extern.h: Add prototypes for new stuff. - yp_svc_udp.c (new file): The async resolver code needs to be able to rummage around inside the RPC UDP transport handle in order to work correcty. There's basically one transport handle, and each time a request comes in, the transaction ID in the handle is changed. This means that if we queue a DNS request, then we handle some other unrelated requests, we will be unable to send the DNS response because the transaction ID and remote address of the client that made the DNS request will have been lost. What we need to do is save the client address and transaction ID in the queue entry for the DNS request, then put the transaction ID and address back in the transport handle when we're ready to reply. (And then we have to undo the change so as not to confuse any other part of the server.) The trouble is that the transaction ID is hidden in an opaque part of the transport handle, and only the code in the svc_udp module in the RPC library knows how to handle it. This file contains a couple of functions that let us read and set the transaction ID in spite of this. This is really a dirty trick and I should be taken out and shot for even thinking about it, but there's no other way to get this stuff to work. - Makefile: add yp_svc_udp.c to SRCS.
1996-12-22 22:30:58 +00:00
ypxfr_clnt.c yp_main.c yp_error.c yp_access.c yp_svc_udp.c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
MAN8= ypserv.8 ypinit.8
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
CFLAGS+= -I. -DDB_CACHE
Fixed building in obj directory.
1995-12-16 23:01:04 +00:00
A few small tweaks related to ypxfr: - Add a ypxfr_callback() function that we can use to signal failure to yppush(8) in the event that we can't fork()/exec() ypxfr(8). yppush only checks the return status from YPPROC_XFR enough to determine that the RPC succeded: it relies on its callback service to figure out whether or not the transfer actually worked. - Give yp_dblookup.c its own debug variable (ypdb_debug) so that DB access debugging messages can be turned on or off independent of the program's global debug messages. - Have the Makefile rpcgen the ypushresp_xfr_1() client stub for us and nuke the unneeded rule for yp_xdr.c that I left in by mistake (the XDR filters live in libc now).
1995-12-23 21:35:35 +00:00
CLEANFILES= yp_svc.c ypxfr_clnt.c yp.h
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
RPCDIR= ${.CURDIR}/../../include/rpcsvc
.PATH: ${RPCDIR}
A few small tweaks related to ypxfr: - Add a ypxfr_callback() function that we can use to signal failure to yppush(8) in the event that we can't fork()/exec() ypxfr(8). yppush only checks the return status from YPPROC_XFR enough to determine that the RPC succeded: it relies on its callback service to figure out whether or not the transfer actually worked. - Give yp_dblookup.c its own debug variable (ypdb_debug) so that DB access debugging messages can be turned on or off independent of the program's global debug messages. - Have the Makefile rpcgen the ypushresp_xfr_1() client stub for us and nuke the unneeded rule for yp_xdr.c that I left in by mistake (the XDR filters live in libc now).
1995-12-23 21:35:35 +00:00
RPCGEN= rpcgen -I -C
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
# We need to remove the 'static' keyword from _rpcsvcstate so that
# yp_main.c can see it.
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
yp_svc.c: yp.x yp.h
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
rm -f ${.TARGET}
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
${RPCGEN} -DYPSERV_ONLY -m ${RPCDIR}/yp.x | \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
sed s/"static int _rpcsvcstate"/"int _rpcsvcstate"/g > ${.TARGET}
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
ypxfr_clnt.c: yp.x yp.h
${RPCGEN} -DYPPUSH_ONLY -l -o ${.TARGET} ${RPCDIR}/yp.x
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
yp.h: yp.x
${RPCGEN} -h -o ${.TARGET} ${RPCDIR}/yp.x
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
afterinstall:
${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 444 \
${.CURDIR}/Makefile.yp \
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
${DESTDIR}/var/yp/Makefile.dist
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 555 \
Fix a bug in the database handle caching. This has to do with the way the underlying database code works. When dealing with first/next queries, you have the notion of a database 'cursor,' which is essentially a file pointer for the database. To select the first entry, you do a fetch with the R_FIRST flag set, then you can use the R_NEXT flag to enumerate the other entries in the database. Unfortunately, doing a direct fetch with no flag does _not_ set the 'cursor,' so you can't do a direct fetch and then enumerate the table from there. The bug is that cached handles generated as the result of a YPPROC_MATCH were being treated as though they were the same as handles generated by a YPPROC_FIRST, which is not the case. The manifestation is that if you do a 'ypmatch first-key-in-map map' followed by a yp_first()/yp_next() pair, the yp_first() and yp_next() both return the first key in the table, which makes the entry appear to be duplicated. A couple smaller things since I'm here: - yp_main.c and yp_error.c both have a global 'int debug' in them. For some reason, our cc/ld doesn't flag this as a multiply defined symbol even though it should. Removed the declaration from yp_main.c; we want the one in yp_error.c. - The Makefile wasn't installing ypinit in the right place.
1998-02-11 19:15:32 +00:00
${.CURDIR}/ypinit.sh ${DESTDIR}/${BINDIR}/ypinit
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@if [ ! -f ${DESTDIR}/var/yp/Makefile.dist ]; then \
ln -s ${DESTDIR}/var/yp/Makefile.dist \
${DESTDIR}/var/yp/Makefile; fi
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
.include <bsd.prog.mk>