freebsd_amp_hwpstate/sys/i386/boot/biosboot/boot.c

308 lines
8.4 KiB
C
Raw Normal View History

1993-06-12 14:58:17 +00:00
/*
* Mach Operating System
* Copyright (c) 1992, 1991 Carnegie Mellon University
* All Rights Reserved.
*
* Permission to use, copy, modify and distribute this software and its
* documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
* ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie Mellon
* the rights to redistribute these changes.
*
* from: Mach, [92/04/03 16:51:14 rvb]
* $Id: boot.c,v 1.37 1995/04/20 06:08:27 phk Exp $
1993-06-12 14:58:17 +00:00
*/
/*
Copyright 1988, 1989, 1990, 1991, 1992
by Intel Corporation, Santa Clara, California.
All Rights Reserved
Permission to use, copy, modify, and distribute this software and
its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appears in all
copies and that both the copyright notice and this permission notice
appear in supporting documentation, and that the name of Intel
not be used in advertising or publicity pertaining to distribution
of the software without specific, written prior permission.
INTEL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
IN NO EVENT SHALL INTEL BE LIABLE FOR ANY SPECIAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT,
NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <sys/param.h>
#include "boot.h"
#include <a.out.h>
#include <sys/reboot.h>
#include <machine/bootinfo.h>
1993-06-12 14:58:17 +00:00
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
#define ouraddr (BOOTSEG << 4) /* XXX */
#define NAMEBUF_LEN 100
char namebuf[NAMEBUF_LEN];
1993-06-12 14:58:17 +00:00
struct exec head;
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
struct bootinfo bootinfo;
int loadflags;
/* NORETURN */
void
boot(int drive)
1993-06-12 14:58:17 +00:00
{
int ret;
char *t;
#ifndef FORCE_COMCONSOLE
if (probe_keyboard()) {
init_serial();
loadflags |= RB_SERIAL;
printf("\nNo keyboard found.");
}
#else
init_serial();
loadflags |= RB_SERIAL;
printf("\nSerial console forced.");
#endif
/* Pick up the story from the Bios on geometry of disks */
for(ret = 0; ret < N_BIOS_GEOM; ret ++)
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
bootinfo.bi_bios_geom[ret] = get_diskinfo(ret + 0x80);
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
bootinfo.bi_basemem = memsize(0);
bootinfo.bi_extmem = memsize(1);
bootinfo.bi_memsizes_valid = 1;
printf("\n>> FreeBSD BOOT @ 0x%x: %d/%d k of memory\n"
"Use hd(1,a)/kernel to boot sd0 when wd0 is also installed.\n"
"Usage: [[%s(%d,a)]%s][-abcCdhrsv]\n"
"Use ? for file list or press Enter for defaults\n\n",
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
ouraddr, bootinfo.bi_basemem, bootinfo.bi_extmem,
devs[drive & 0x80 ? 0 : 2], drive & 0x7f, name);
1993-06-12 14:58:17 +00:00
gateA20();
1993-06-12 14:58:17 +00:00
loadstart:
/***************************************************************\
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
* As a default set it to the first partition of the boot *
1993-06-12 14:58:17 +00:00
* floppy or hard drive *
\***************************************************************/
part = 0;
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
unit = drive & 0x7f;
1993-06-12 14:58:17 +00:00
maj = (drive&0x80 ? 0 : 2); /* a good first bet */
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
printf("Boot: ");
/*
* Be paranoid and make doubly sure that the input
* buffer is empty.
*/
if (loadflags & RB_SERIAL)
init_serial();
1993-06-12 14:58:17 +00:00
getbootdev(&loadflags);
ret = openrd();
if (ret != 0) {
if (ret > 0)
printf("Can't find %s\n", name);
1993-06-12 14:58:17 +00:00
goto loadstart;
}
/* if (inode.i_mode&IEXEC)
loadflags |= RB_KDB;
*/
loadprog(loadflags);
goto loadstart;
}
void
loadprog(int howto)
1993-06-12 14:58:17 +00:00
{
long int startaddr;
long int addr; /* physical address.. not directly useable */
long int bootdev;
1993-06-12 14:58:17 +00:00
int i;
unsigned pad;
1993-06-12 14:58:17 +00:00
read((void *)&head, sizeof(head));
if ( N_BADMAG(head)) {
1993-06-12 14:58:17 +00:00
printf("Invalid format!\n");
return;
}
poff = N_TXTOFF(head);
/*if(poff==0)
poff = 32;*/
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
/*
* We assume that the entry address is the same as the lowest text
* address and that the kernel startup code handles relocation by
* this address rounded down to a multiple of 16M.
*/
startaddr = head.a_entry & 0x00FFFFFF;
addr = startaddr;
1993-06-12 14:58:17 +00:00
printf("Booting %s(%d,%c)%s @ 0x%x\n"
, devs[maj]
, unit
, 'a'+part
, name
, addr);
if(addr < 0x00100000)
1993-06-12 14:58:17 +00:00
{
/*
* Bail out, instead of risking to damage the BIOS
* variables, the loader, or the adapter memory area.
* We don't support loading below 1 MB any more.
*/
printf("Start address too low\n");
return;
1993-06-12 14:58:17 +00:00
}
printf("text=0x%x ", head.a_text);
1993-06-12 14:58:17 +00:00
/********************************************************/
/* LOAD THE TEXT SEGMENT */
/********************************************************/
xread((void *)addr, head.a_text);
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
addr += head.a_text;
1993-06-12 14:58:17 +00:00
/********************************************************/
/* Load the Initialised data after the text */
/********************************************************/
while (addr & CLOFSET)
*(char *)addr++ = 0;
printf("data=0x%x ", head.a_data);
xread((void *)addr, head.a_data);
1993-06-12 14:58:17 +00:00
addr += head.a_data;
/********************************************************/
/* Skip over the uninitialised data */
/* (but clear it) */
/********************************************************/
printf("bss=0x%x ", head.a_bss);
/*
* XXX however, we should be checking that we don't load ... into
* nonexistent memory. A full symbol table is unlikely to fit on 4MB
* machines.
*/
pbzero((void *)addr,head.a_bss);
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
addr += head.a_bss;
/* Pad to a page boundary. */
pad = (unsigned)addr % NBPG;
if (pad != 0) {
pad = NBPG - pad;
addr += pad;
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
}
bootinfo.bi_symtab = addr;
/********************************************************/
/* Copy the symbol table size */
/********************************************************/
pcpy((void *)&head.a_syms, (void *)addr, sizeof(head.a_syms));
addr += sizeof(head.a_syms);
/********************************************************/
/* Load the symbol table */
/********************************************************/
printf("symbols=[+0x%x+0x%x+0x%x", pad, sizeof(head.a_syms),
head.a_syms);
xread((void *)addr, head.a_syms);
addr += head.a_syms;
/********************************************************/
/* Load the string table size */
/********************************************************/
read((void *)&i, sizeof(int));
pcpy((void *)&i, (void *)addr, sizeof(int));
i -= sizeof(int);
addr += sizeof(int);
/********************************************************/
/* Load the string table */
/********************************************************/
printf("+0x%x+0x%x] ", sizeof(int), i);
xread((void *)addr, i);
addr += i;
bootinfo.bi_esymtab = addr;
/*
* For backwards compatibility, use the previously-unused adaptor
* and controller bitfields to hold the slice number.
*/
bootdev = MAKEBOOTDEV(maj, (slice >> 4), slice & 0xf, unit, part);
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
bootinfo.bi_version = BOOTINFO_VERSION;
bootinfo.bi_kernelname = name + ouraddr;
bootinfo.bi_nfs_diskless = NULL;
bootinfo.bi_size = sizeof(bootinfo);
printf("total=0x%x entry point=0x%x\n", (int)addr, (int)startaddr);
startprog((int)startaddr, howto | RB_BOOTINFO, bootdev,
(int)&bootinfo + ouraddr);
1993-06-12 14:58:17 +00:00
}
void
getbootdev(int *howto)
1993-06-12 14:58:17 +00:00
{
char c, *ptr = namebuf;
if (gets(namebuf)) {
while (c=*ptr) {
while (c==' ')
c = *++ptr;
if (!c)
return;
if (c=='-')
while ((c = *++ptr) && c!=' ') {
if (c == 'C')
{ *howto |= RB_CDROM; continue; }
if (c == 'a')
{ *howto |= RB_ASKNAME; continue; }
if (c == 'b')
{ *howto |= RB_HALT; continue; }
if (c == 'c')
{ *howto |= RB_CONFIG; continue; }
if (c == 'd')
{ *howto |= RB_KDB; continue; }
if (c == 'r')
{ *howto |= RB_DFLTROOT; continue;}
if (c == 's')
{ *howto |= RB_SINGLE; continue;}
if (c == 'v')
{ *howto |= RB_VERBOSE; continue;}
if (c == 'h') {
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
*howto ^= RB_SERIAL;
if (*howto & RB_SERIAL)
init_serial();
continue;
1993-06-12 14:58:17 +00:00
}
}
1993-06-12 14:58:17 +00:00
else {
name = ptr;
while ((c = *++ptr) && c!=' ');
if (c)
*ptr++ = 0;
}
}
} else
printf("\n");
1993-06-12 14:58:17 +00:00
}