freebsd_amp_hwpstate/sys/i386/isa/apic_vector.s

534 lines
12 KiB
ArmAsm
Raw Normal View History

/*
* from: vector.s, 386BSD 0.1 unknown origin
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
#include <machine/apic.h>
#include <machine/smp.h>
#include "i386/isa/intr_machdep.h"
/* convert an absolute IRQ# into a bitmask */
#define IRQ_BIT(irq_num) (1 << (irq_num))
/* make an index into the IO APIC from the IRQ# */
#define REDTBL_IDX(irq_num) (0x10 + ((irq_num) * 2))
- Change fast interrupts on x86 to push a full interrupt frame and to return through doreti to handle ast's. This is necessary for the clock interrupts to work properly. - Change the clock interrupts on the x86 to be fast instead of threaded. This is needed because both hardclock() and statclock() need to run in the context of the current process, not in a separate thread context. - Kill the prevproc hack as it is no longer needed. - We really need Giant when we call psignal(), but we don't want to block during the clock interrupt. Instead, use two p_flag's in the proc struct to mark the current process as having a pending SIGVTALRM or a SIGPROF and let them be delivered during ast() when hardclock() has finished running. - Remove CLKF_BASEPRI, which was #ifdef'd out on the x86 anyways. It was broken on the x86 if it was turned on since cpl is gone. It's only use was to bogusly run softclock() directly during hardclock() rather than scheduling an SWI. - Remove the COM_LOCK simplelock and replace it with a clock_lock spin mutex. Since the spin mutex already handles disabling/restoring interrupts appropriately, this also lets us axe all the *_intr() fu. - Back out the hacks in the APIC_IO x86 cpu_initclocks() code to use temporary fast interrupts for the APIC trial. - Add two new process flags P_ALRMPEND and P_PROFPEND to mark the pending signals in hardclock() that are to be delivered in ast(). Submitted by: jakeb (making statclock safe in a fast interrupt) Submitted by: cp (concept of delaying signals until ast())
2000-10-06 02:20:21 +00:00
/*
*
*/
#define PUSH_FRAME \
pushl $0 ; /* dummy error code */ \
pushl $0 ; /* dummy trap type */ \
pushal ; \
pushl %ds ; /* save data and extra segments ... */ \
pushl %es ; \
pushl %fs
#define POP_FRAME \
popl %fs ; \
popl %es ; \
popl %ds ; \
popal ; \
addl $4+4,%esp
/*
* Macros for interrupt entry, call to handler, and exit.
*/
#define FAST_INTR(irq_num, vec_name) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
- Change fast interrupts on x86 to push a full interrupt frame and to return through doreti to handle ast's. This is necessary for the clock interrupts to work properly. - Change the clock interrupts on the x86 to be fast instead of threaded. This is needed because both hardclock() and statclock() need to run in the context of the current process, not in a separate thread context. - Kill the prevproc hack as it is no longer needed. - We really need Giant when we call psignal(), but we don't want to block during the clock interrupt. Instead, use two p_flag's in the proc struct to mark the current process as having a pending SIGVTALRM or a SIGPROF and let them be delivered during ast() when hardclock() has finished running. - Remove CLKF_BASEPRI, which was #ifdef'd out on the x86 anyways. It was broken on the x86 if it was turned on since cpl is gone. It's only use was to bogusly run softclock() directly during hardclock() rather than scheduling an SWI. - Remove the COM_LOCK simplelock and replace it with a clock_lock spin mutex. Since the spin mutex already handles disabling/restoring interrupts appropriately, this also lets us axe all the *_intr() fu. - Back out the hacks in the APIC_IO x86 cpu_initclocks() code to use temporary fast interrupts for the APIC trial. - Add two new process flags P_ALRMPEND and P_PROFPEND to mark the pending signals in hardclock() that are to be delivered in ast(). Submitted by: jakeb (making statclock safe in a fast interrupt) Submitted by: cp (concept of delaying signals until ast())
2000-10-06 02:20:21 +00:00
PUSH_FRAME ; \
movl $KDSEL,%eax ; \
mov %ax,%ds ; \
- Change fast interrupts on x86 to push a full interrupt frame and to return through doreti to handle ast's. This is necessary for the clock interrupts to work properly. - Change the clock interrupts on the x86 to be fast instead of threaded. This is needed because both hardclock() and statclock() need to run in the context of the current process, not in a separate thread context. - Kill the prevproc hack as it is no longer needed. - We really need Giant when we call psignal(), but we don't want to block during the clock interrupt. Instead, use two p_flag's in the proc struct to mark the current process as having a pending SIGVTALRM or a SIGPROF and let them be delivered during ast() when hardclock() has finished running. - Remove CLKF_BASEPRI, which was #ifdef'd out on the x86 anyways. It was broken on the x86 if it was turned on since cpl is gone. It's only use was to bogusly run softclock() directly during hardclock() rather than scheduling an SWI. - Remove the COM_LOCK simplelock and replace it with a clock_lock spin mutex. Since the spin mutex already handles disabling/restoring interrupts appropriately, this also lets us axe all the *_intr() fu. - Back out the hacks in the APIC_IO x86 cpu_initclocks() code to use temporary fast interrupts for the APIC trial. - Add two new process flags P_ALRMPEND and P_PROFPEND to mark the pending signals in hardclock() that are to be delivered in ast(). Submitted by: jakeb (making statclock safe in a fast interrupt) Submitted by: cp (concept of delaying signals until ast())
2000-10-06 02:20:21 +00:00
mov %ax,%es ; \
movl $KPSEL,%eax ; \
mov %ax,%fs ; \
- Change fast interrupts on x86 to push a full interrupt frame and to return through doreti to handle ast's. This is necessary for the clock interrupts to work properly. - Change the clock interrupts on the x86 to be fast instead of threaded. This is needed because both hardclock() and statclock() need to run in the context of the current process, not in a separate thread context. - Kill the prevproc hack as it is no longer needed. - We really need Giant when we call psignal(), but we don't want to block during the clock interrupt. Instead, use two p_flag's in the proc struct to mark the current process as having a pending SIGVTALRM or a SIGPROF and let them be delivered during ast() when hardclock() has finished running. - Remove CLKF_BASEPRI, which was #ifdef'd out on the x86 anyways. It was broken on the x86 if it was turned on since cpl is gone. It's only use was to bogusly run softclock() directly during hardclock() rather than scheduling an SWI. - Remove the COM_LOCK simplelock and replace it with a clock_lock spin mutex. Since the spin mutex already handles disabling/restoring interrupts appropriately, this also lets us axe all the *_intr() fu. - Back out the hacks in the APIC_IO x86 cpu_initclocks() code to use temporary fast interrupts for the APIC trial. - Add two new process flags P_ALRMPEND and P_PROFPEND to mark the pending signals in hardclock() that are to be delivered in ast(). Submitted by: jakeb (making statclock safe in a fast interrupt) Submitted by: cp (concept of delaying signals until ast())
2000-10-06 02:20:21 +00:00
FAKE_MCOUNT(13*4(%esp)) ; \
movl PCPU(CURPROC),%ebx ; \
incl P_INTR_NESTING_LEVEL(%ebx) ; \
pushl _intr_unit + (irq_num) * 4 ; \
call *_intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
addl $4, %esp ; \
movl $0, _lapic+LA_EOI ; \
lock ; \
incl _cnt+V_INTR ; /* book-keeping can wait */ \
movl _intr_countp + (irq_num) * 4, %eax ; \
lock ; \
incl (%eax) ; \
decl P_INTR_NESTING_LEVEL(%ebx) ; \
MEXITCOUNT ; \
jmp _doreti
#define IOAPICADDR(irq_num) CNAME(int_to_apicintpin) + 16 * (irq_num) + 8
#define REDIRIDX(irq_num) CNAME(int_to_apicintpin) + 16 * (irq_num) + 12
#define MASK_IRQ(irq_num) \
IMASK_LOCK ; /* into critical reg */ \
testl $IRQ_BIT(irq_num), _apic_imen ; \
jne 7f ; /* masked, don't mask */ \
orl $IRQ_BIT(irq_num), _apic_imen ; /* set the mask bit */ \
movl IOAPICADDR(irq_num), %ecx ; /* ioapic addr */ \
movl REDIRIDX(irq_num), %eax ; /* get the index */ \
movl %eax, (%ecx) ; /* write the index */ \
movl IOAPIC_WINDOW(%ecx), %eax ; /* current value */ \
orl $IOART_INTMASK, %eax ; /* set the mask */ \
movl %eax, IOAPIC_WINDOW(%ecx) ; /* new value */ \
7: ; /* already masked */ \
IMASK_UNLOCK
/*
* Test to see whether we are handling an edge or level triggered INT.
* Level-triggered INTs must still be masked as we don't clear the source,
* and the EOI cycle would cause redundant INTs to occur.
*/
#define MASK_LEVEL_IRQ(irq_num) \
testl $IRQ_BIT(irq_num), _apic_pin_trigger ; \
jz 9f ; /* edge, don't mask */ \
MASK_IRQ(irq_num) ; \
9:
#ifdef APIC_INTR_REORDER
#define EOI_IRQ(irq_num) \
movl _apic_isrbit_location + 8 * (irq_num), %eax ; \
movl (%eax), %eax ; \
testl _apic_isrbit_location + 4 + 8 * (irq_num), %eax ; \
jz 9f ; /* not active */ \
movl $0, _lapic+LA_EOI ; \
9:
#else
#define EOI_IRQ(irq_num) \
testl $IRQ_BIT(irq_num), _lapic+LA_ISR1; \
jz 9f ; /* not active */ \
movl $0, _lapic+LA_EOI; \
9:
#endif
/*
* Test to see if the source is currently masked, clear if so.
*/
#define UNMASK_IRQ(irq_num) \
IMASK_LOCK ; /* into critical reg */ \
testl $IRQ_BIT(irq_num), _apic_imen ; \
je 7f ; /* bit clear, not masked */ \
andl $~IRQ_BIT(irq_num), _apic_imen ;/* clear mask bit */ \
movl IOAPICADDR(irq_num), %ecx ; /* ioapic addr */ \
movl REDIRIDX(irq_num), %eax ; /* get the index */ \
movl %eax, (%ecx) ; /* write the index */ \
movl IOAPIC_WINDOW(%ecx), %eax ; /* current value */ \
andl $~IOART_INTMASK, %eax ; /* clear the mask */ \
movl %eax, IOAPIC_WINDOW(%ecx) ; /* new value */ \
7: ; /* already unmasked */ \
IMASK_UNLOCK
/*
* Slow, threaded interrupts.
*
* XXX Most of the parameters here are obsolete. Fix this when we're
* done.
* XXX we really shouldn't return via doreti if we just schedule the
* interrupt handler and don't run anything. We could just do an
* iret. FIXME.
*/
#define INTR(irq_num, vec_name, maybe_extra_ipending) \
.text ; \
SUPERALIGN_TEXT ; \
/* _XintrNN: entry point used by IDT/HWIs via _vec[]. */ \
IDTVEC(vec_name) ; \
PUSH_FRAME ; \
movl $KDSEL, %eax ; /* reload with kernel's data segment */ \
mov %ax, %ds ; \
mov %ax, %es ; \
movl $KPSEL, %eax ; \
mov %ax, %fs ; \
; \
maybe_extra_ipending ; \
; \
MASK_LEVEL_IRQ(irq_num) ; \
EOI_IRQ(irq_num) ; \
0: ; \
movl PCPU(CURPROC),%ebx ; \
incl P_INTR_NESTING_LEVEL(%ebx) ; \
; \
/* entry point used by doreti_unpend for HWIs. */ \
__CONCAT(Xresume,irq_num): ; \
FAKE_MCOUNT(13*4(%esp)) ; /* XXX avoid dbl cnt */ \
pushl $irq_num; /* pass the IRQ */ \
sti ; \
call _sched_ithd ; \
addl $4, %esp ; /* discard the parameter */ \
; \
decl P_INTR_NESTING_LEVEL(%ebx) ; \
MEXITCOUNT ; \
jmp _doreti
/*
* Handle "spurious INTerrupts".
* Notes:
* This is different than the "spurious INTerrupt" generated by an
* 8259 PIC for missing INTs. See the APIC documentation for details.
* This routine should NOT do an 'EOI' cycle.
*/
.text
SUPERALIGN_TEXT
.globl _Xspuriousint
_Xspuriousint:
/* No EOI cycle used here */
iret
/*
* Handle TLB shootdowns.
*/
.text
SUPERALIGN_TEXT
.globl _Xinvltlb
_Xinvltlb:
pushl %eax
#ifdef COUNT_XINVLTLB_HITS
pushl %fs
movl $KPSEL, %eax
mov %ax, %fs
movl PCPU(CPUID), %eax
popl %fs
ss
incl _xhits(,%eax,4)
#endif /* COUNT_XINVLTLB_HITS */
movl %cr3, %eax /* invalidate the TLB */
movl %eax, %cr3
ss /* stack segment, avoid %ds load */
movl $0, _lapic+LA_EOI /* End Of Interrupt to APIC */
popl %eax
iret
#ifdef BETTER_CLOCK
/*
* Executed by a CPU when it receives an Xcpucheckstate IPI from another CPU,
*
* - Stores current cpu state in checkstate_cpustate[cpuid]
* 0 == user, 1 == sys, 2 == intr
* - Stores current process in checkstate_curproc[cpuid]
*
* - Signals its receipt by setting bit cpuid in checkstate_probed_cpus.
*
* stack: 0->ds, 4->fs, 8->ebx, 12->eax, 16->eip, 20->cs, 24->eflags
*/
.text
SUPERALIGN_TEXT
.globl _Xcpucheckstate
.globl _checkstate_cpustate
.globl _checkstate_curproc
.globl _checkstate_pc
_Xcpucheckstate:
pushl %eax
pushl %ebx
pushl %ds /* save current data segment */
pushl %fs
movl $KDSEL, %eax
mov %ax, %ds /* use KERNEL data segment */
movl $KPSEL, %eax
mov %ax, %fs
movl $0, _lapic+LA_EOI /* End Of Interrupt to APIC */
movl $0, %ebx
movl 20(%esp), %eax
andl $3, %eax
cmpl $3, %eax
je 1f
testl $PSL_VM, 24(%esp)
jne 1f
incl %ebx /* system or interrupt */
1:
movl PCPU(CPUID), %eax
movl %ebx, _checkstate_cpustate(,%eax,4)
movl PCPU(CURPROC), %ebx
movl %ebx, _checkstate_curproc(,%eax,4)
movl 16(%esp), %ebx
movl %ebx, _checkstate_pc(,%eax,4)
lock /* checkstate_probed_cpus |= (1<<id) */
btsl %eax, _checkstate_probed_cpus
popl %fs
popl %ds /* restore previous data segment */
popl %ebx
popl %eax
iret
#endif /* BETTER_CLOCK */
/*
* Executed by a CPU when it receives an Xcpuast IPI from another CPU,
*
* - Signals its receipt by clearing bit cpuid in checkstate_need_ast.
*
* - We need a better method of triggering asts on other cpus.
*/
.text
SUPERALIGN_TEXT
.globl _Xcpuast
_Xcpuast:
PUSH_FRAME
movl $KDSEL, %eax
mov %ax, %ds /* use KERNEL data segment */
mov %ax, %es
movl $KPSEL, %eax
mov %ax, %fs
movl PCPU(CPUID), %eax
lock /* checkstate_need_ast &= ~(1<<id) */
btrl %eax, _checkstate_need_ast
movl $0, _lapic+LA_EOI /* End Of Interrupt to APIC */
lock
btsl %eax, _checkstate_pending_ast
jc 1f
FAKE_MCOUNT(13*4(%esp))
MTX_LOCK_SPIN(sched_lock, 0)
movl PCPU(CURPROC),%ebx
orl $PS_ASTPENDING, P_SFLAG(%ebx)
movl PCPU(CPUID), %eax
lock
btrl %eax, _checkstate_pending_ast
lock
btrl %eax, CNAME(resched_cpus)
jnc 2f
orl $PS_NEEDRESCHED, P_SFLAG(%ebx)
lock
incl CNAME(want_resched_cnt)
2:
MTX_UNLOCK_SPIN(sched_lock)
lock
incl CNAME(cpuast_cnt)
MEXITCOUNT
jmp _doreti
1:
/* We are already in the process of delivering an ast for this CPU */
POP_FRAME
iret
/*
* Executed by a CPU when it receives an Xcpustop IPI from another CPU,
*
* - Signals its receipt.
* - Waits for permission to restart.
* - Signals its restart.
*/
.text
SUPERALIGN_TEXT
.globl _Xcpustop
_Xcpustop:
pushl %ebp
movl %esp, %ebp
pushl %eax
pushl %ecx
pushl %edx
pushl %ds /* save current data segment */
pushl %fs
movl $KDSEL, %eax
mov %ax, %ds /* use KERNEL data segment */
movl $KPSEL, %eax
mov %ax, %fs
movl $0, _lapic+LA_EOI /* End Of Interrupt to APIC */
movl PCPU(CPUID), %eax
imull $PCB_SIZE, %eax
leal CNAME(stoppcbs)(%eax), %eax
pushl %eax
call CNAME(savectx) /* Save process context */
addl $4, %esp
movl PCPU(CPUID), %eax
lock
btsl %eax, _stopped_cpus /* stopped_cpus |= (1<<id) */
1:
btl %eax, _started_cpus /* while (!(started_cpus & (1<<id))) */
jnc 1b
lock
btrl %eax, _started_cpus /* started_cpus &= ~(1<<id) */
lock
btrl %eax, _stopped_cpus /* stopped_cpus &= ~(1<<id) */
test %eax, %eax
jnz 2f
movl CNAME(cpustop_restartfunc), %eax
test %eax, %eax
jz 2f
movl $0, CNAME(cpustop_restartfunc) /* One-shot */
call *%eax
2:
popl %fs
popl %ds /* restore previous data segment */
popl %edx
popl %ecx
popl %eax
movl %ebp, %esp
popl %ebp
iret
MCOUNT_LABEL(bintr)
FAST_INTR(0,fastintr0)
FAST_INTR(1,fastintr1)
FAST_INTR(2,fastintr2)
FAST_INTR(3,fastintr3)
FAST_INTR(4,fastintr4)
FAST_INTR(5,fastintr5)
FAST_INTR(6,fastintr6)
FAST_INTR(7,fastintr7)
FAST_INTR(8,fastintr8)
FAST_INTR(9,fastintr9)
FAST_INTR(10,fastintr10)
FAST_INTR(11,fastintr11)
FAST_INTR(12,fastintr12)
FAST_INTR(13,fastintr13)
FAST_INTR(14,fastintr14)
FAST_INTR(15,fastintr15)
FAST_INTR(16,fastintr16)
FAST_INTR(17,fastintr17)
FAST_INTR(18,fastintr18)
FAST_INTR(19,fastintr19)
FAST_INTR(20,fastintr20)
FAST_INTR(21,fastintr21)
FAST_INTR(22,fastintr22)
FAST_INTR(23,fastintr23)
FAST_INTR(24,fastintr24)
FAST_INTR(25,fastintr25)
FAST_INTR(26,fastintr26)
FAST_INTR(27,fastintr27)
FAST_INTR(28,fastintr28)
FAST_INTR(29,fastintr29)
FAST_INTR(30,fastintr30)
FAST_INTR(31,fastintr31)
#define CLKINTR_PENDING movl $1,CNAME(clkintr_pending)
/* Threaded interrupts */
INTR(0,intr0, CLKINTR_PENDING)
INTR(1,intr1,)
INTR(2,intr2,)
INTR(3,intr3,)
INTR(4,intr4,)
INTR(5,intr5,)
INTR(6,intr6,)
INTR(7,intr7,)
INTR(8,intr8,)
INTR(9,intr9,)
INTR(10,intr10,)
INTR(11,intr11,)
INTR(12,intr12,)
INTR(13,intr13,)
INTR(14,intr14,)
INTR(15,intr15,)
INTR(16,intr16,)
INTR(17,intr17,)
INTR(18,intr18,)
INTR(19,intr19,)
INTR(20,intr20,)
INTR(21,intr21,)
INTR(22,intr22,)
INTR(23,intr23,)
INTR(24,intr24,)
INTR(25,intr25,)
INTR(26,intr26,)
INTR(27,intr27,)
INTR(28,intr28,)
INTR(29,intr29,)
INTR(30,intr30,)
INTR(31,intr31,)
MCOUNT_LABEL(eintr)
/*
* Executed by a CPU when it receives a RENDEZVOUS IPI from another CPU.
*
* - Calls the generic rendezvous action function.
*/
.text
SUPERALIGN_TEXT
.globl _Xrendezvous
_Xrendezvous:
PUSH_FRAME
movl $KDSEL, %eax
mov %ax, %ds /* use KERNEL data segment */
mov %ax, %es
movl $KPSEL, %eax
mov %ax, %fs
call _smp_rendezvous_action
movl $0, _lapic+LA_EOI /* End Of Interrupt to APIC */
POP_FRAME
iret
.data
#ifdef COUNT_XINVLTLB_HITS
.globl _xhits
_xhits:
.space (NCPU * 4), 0
#endif /* COUNT_XINVLTLB_HITS */
/* variables used by stop_cpus()/restart_cpus()/Xcpustop */
.globl _stopped_cpus, _started_cpus
_stopped_cpus:
.long 0
_started_cpus:
.long 0
#ifdef BETTER_CLOCK
.globl _checkstate_probed_cpus
_checkstate_probed_cpus:
.long 0
#endif /* BETTER_CLOCK */
.globl _checkstate_need_ast
_checkstate_need_ast:
.long 0
_checkstate_pending_ast:
.long 0
.globl CNAME(resched_cpus)
.globl CNAME(want_resched_cnt)
.globl CNAME(cpuast_cnt)
.globl CNAME(cpustop_restartfunc)
CNAME(resched_cpus):
.long 0
CNAME(want_resched_cnt):
.long 0
CNAME(cpuast_cnt):
.long 0
CNAME(cpustop_restartfunc):
.long 0
.globl _apic_pin_trigger
_apic_pin_trigger:
.long 0
.text