ata: clean up empty lines in .c and .h files

This commit is contained in:
Mateusz Guzik 2020-09-01 21:40:47 +00:00
parent 721b3402b6
commit 1529c50966
15 changed files with 13 additions and 30 deletions

View File

@ -296,7 +296,6 @@ struct ata_request {
#define ATA_DEBUG_RQ(request, string)
#endif
/* structure describing an ATA/ATAPI device */
struct ata_device {
device_t dev; /* device handle */

View File

@ -138,7 +138,7 @@ ata_isa_attach(device_t dev)
ch->r_io[ATA_CONTROL].offset = 0;
ch->r_io[ATA_IDX_ADDR].res = io;
ata_default_registers(dev);
/* initialize softc for this channel */
ch->unit = 0;
ch->flags |= ATA_USE_16BIT;
@ -187,7 +187,6 @@ ata_isa_resume(device_t dev)
return ata_resume(dev);
}
static device_method_t ata_isa_methods[] = {
/* device interface */
DEVMETHOD(device_probe, ata_isa_probe),

View File

@ -99,7 +99,6 @@ ata_begin_transaction(struct ata_request *request)
request->flags &= ~ATA_R_DMA;
switch (request->flags & (ATA_R_ATAPI | ATA_R_DMA)) {
/* ATA PIO data transfer and control commands */
default:
{
@ -116,7 +115,6 @@ ata_begin_transaction(struct ata_request *request)
/* device reset doesn't interrupt */
if (request->u.ata.command == ATA_DEVICE_RESET) {
int timeout = 1000000;
do {
DELAY(10);
@ -254,7 +252,6 @@ ata_end_transaction(struct ata_request *request)
request->status = ATA_IDX_INB(ch, ATA_STATUS);
switch (request->flags & (ATA_R_ATAPI | ATA_R_DMA | ATA_R_CONTROL)) {
/* ATA PIO data transfer and control commands */
default:
@ -273,10 +270,9 @@ ata_end_transaction(struct ata_request *request)
request->error = ATA_IDX_INB(ch, ATA_ERROR);
goto end_finished;
}
/* are we moving data ? */
if (request->flags & (ATA_R_READ | ATA_R_WRITE)) {
/* if read data get it */
if (request->flags & ATA_R_READ) {
int flags = ATA_S_DRQ;
@ -297,7 +293,6 @@ ata_end_transaction(struct ata_request *request)
/* do we need a scoop more ? */
if (request->bytecount > request->donecount) {
/* set this transfer size according to HW capabilities */
request->transfersize =
min((request->bytecount - request->donecount),
@ -305,7 +300,6 @@ ata_end_transaction(struct ata_request *request)
/* if data write command, output the data */
if (request->flags & ATA_R_WRITE) {
/* if we get an error here we are done with the HW */
if (ata_wait(ch, request->unit, (ATA_S_READY | ATA_S_DRQ)) < 0) {
device_printf(request->parent,
@ -364,7 +358,6 @@ ata_end_transaction(struct ata_request *request)
switch ((ATA_IDX_INB(ch, ATA_IREASON) & (ATA_I_CMD | ATA_I_IN)) |
(request->status & ATA_S_DRQ)) {
case ATAPI_P_CMDOUT:
/* this seems to be needed for some (slow) devices */
DELAY(10);
@ -457,7 +450,7 @@ ata_end_transaction(struct ata_request *request)
request->status |= ATA_S_ERROR;
else if (!(request->flags & ATA_R_TIMEOUT))
request->donecount = request->bytecount;
/* release SG list etc */
ch->dma.unload(request);

View File

@ -161,7 +161,7 @@ ata_pci_suspend(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(dev);
int error = 0;
bus_generic_suspend(dev);
if (ctlr->suspend)
error = ctlr->suspend(dev);
@ -173,7 +173,7 @@ ata_pci_resume(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(dev);
int error = 0;
if (ctlr->resume)
error = ctlr->resume(dev);
bus_generic_resume(dev);

View File

@ -56,7 +56,6 @@ __FBSDID("$FreeBSD$");
static int ata_cypress_chipinit(device_t dev);
static int ata_cypress_setmode(device_t dev, int target, int mode);
/*
* Cypress chipset support functions
*/

View File

@ -89,7 +89,7 @@ static int
ata_cyrix_ch_attach(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
ch->dma.alignment = 16;
ch->dma.max_iosize = 64 * DEV_BSIZE;
return (ata_pci_ch_attach(dev));

View File

@ -154,7 +154,6 @@ imx_ata_ch_attach(device_t dev)
bus_write_2(ctrl->r_res1, 0x24, 0xc0);
DELAY(100);
/* Write TIME_OFF/ON/1/2W */
bus_write_1(ctrl->r_res1, 0x00, 3);
bus_write_1(ctrl->r_res1, 0x01, 3);

View File

@ -65,7 +65,6 @@ static int ata_highpoint_check_80pin(device_t dev, int mode);
#define HPT_374 3
#define HPT_OLD 1
/*
* HighPoint chipset support functions
*/

View File

@ -117,7 +117,7 @@ ata_ite_ch_attach(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
int error;
error = ata_pci_ch_attach(dev);
ch->flags |= ATA_CHECKS_CABLE;
ch->flags |= ATA_NO_ATAPI_DMA;

View File

@ -135,7 +135,7 @@ ata_jmicron_ch_attach(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
int error;
error = ata_pci_ch_attach(dev);
ch->flags |= ATA_CHECKS_CABLE;
return (error);

View File

@ -147,7 +147,7 @@ ata_marvell_ch_attach(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
int error;
error = ata_pci_ch_attach(dev);
/* dont use 32 bit PIO transfers */
ch->flags |= ATA_USE_16BIT;

View File

@ -91,7 +91,7 @@ static int
ata_national_ch_attach(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
ch->dma.alignment = 16;
ch->dma.max_iosize = 64 * DEV_BSIZE;
return (ata_pci_ch_attach(dev));

View File

@ -90,11 +90,11 @@ static int
ata_netcell_ch_attach(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
/* setup the usual register normal pci style */
if (ata_pci_ch_attach(dev))
return ENXIO;
/* the NetCell only supports 16 bit PIO transfers */
ch->flags |= ATA_USE_16BIT;
/* It is a hardware RAID without cable. */

View File

@ -731,7 +731,6 @@ ata_promise_mio_reset(device_t dev)
case PR_SATA:
if ((ctlr->chip->cfg2 == PR_SATA) ||
((ctlr->chip->cfg2 == PR_CMBO) && (ch->unit < 2))) {
/* mask plug/unplug intr */
ATA_OUTL(ctlr->r_res2, 0x06c, (0x00110000 << ch->unit));
}
@ -745,7 +744,6 @@ ata_promise_mio_reset(device_t dev)
if ((ctlr->chip->cfg2 == PR_SATA) ||
((ctlr->chip->cfg2 == PR_CMBO) && (ch->unit < 2))) {
if (ata_sata_phy_reset(dev, -1, 1))
ata_generic_reset(dev);
else
@ -778,7 +776,6 @@ ata_promise_mio_reset(device_t dev)
if ((ctlr->chip->cfg2 == PR_SATA2) ||
((ctlr->chip->cfg2 == PR_CMBO2) && (ch->unit < 2))) {
/* set PHY mode to "improved" */
ATA_OUTL(ctlr->r_res2, 0x414 + (ch->unit << 8),
(ATA_INL(ctlr->r_res2, 0x414 + (ch->unit << 8)) &
@ -823,7 +820,6 @@ ata_promise_mio_reset(device_t dev)
else
ata_generic_reset(dev);
break;
}
}

View File

@ -68,7 +68,6 @@ static int ata_serverworks_status(device_t dev);
#define SWKS_100 2
#define SWKS_MIO 3
/*
* ServerWorks chipset support functions
*/
@ -235,7 +234,7 @@ ata_serverworks_ch_attach(device_t dev)
* The status register must be read as a long to fill the other
* registers.
*/
ch->hw.status = ata_serverworks_status;
ch->flags |= ATA_STATUS_IS_LONG;
}