Implementation of the upcoming Wireless Mesh standard, 802.11s, on the

net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.

Authentication and encryption are not implemented.

There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).

A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.

Drivers that support mesh networks right now are: ath, ral and mwl.

More information at: http://wiki.freebsd.org/WifiMesh

Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.

Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.

Reviewed by:	sam
Approved by:	re (kensmith)
Obtained from:	projects/mesh11s

sbin/ifconfig/ifconfig.8

@@ -28,7 +28,7 @@
 .\"     From: @(#)ifconfig.8	8.3 (Berkeley) 1/5/94
 .\" $FreeBSD$
 .\"
-.Dd June 24, 2009
+.Dd July 8, 2009
 .Dt IFCONFIG 8
 .Os
 .Sh NAME
@@ -623,6 +623,7 @@ is one of
 .Cm hostap ),
 .Cm wds ,
 .Cm tdma ,
+.Cm mesh ,
 and
 .Cm monitor .
 The operating mode of a cloned interface cannot be changed.
@@ -1195,6 +1196,9 @@ indicates the address is denied access,
 .Ql *
 indicates the address is present but the current policy open
 (so the ACL is not consulted).
+.It Cm list mesh
+Displays the mesh routing table, used for forwarding packets on a mesh
+network.
 .It Cm list regdomain
 Display the current regulatory settings including the available channels
 and transmit power caps.
@@ -1278,6 +1282,8 @@ When operating as an access point display the stations that are
 currently associated.
 When operating in ad-hoc mode display stations identified as
 neighbors in the IBSS.
+When operating in mesh mode display stations identified as
+neighbors in the MBSS.
 When operating in station mode display the access point.
 Capabilities advertised by the stations are described under
 the
@@ -1813,6 +1819,85 @@ as it handles the RADIUS processing
 (and marks stations as authorized).
 .El
 .Pp
+The following parameters are related to a wireless interface operating in mesh
+mode:
+.Bl -tag -width indent
+.It Cm meshid Ar meshid
+Set the desired Mesh Identifier.
+The Mesh ID is a string up to 32 characters in length.
+A mesh interface must have a Mesh Identifier specified
+to reach an operational state.
+.It Cm meshttl Ar ttl
+Set the desired ``time to live'' for mesh forwarded packets;
+this is the number of hops a packet may be forwarded before
+it is discarded.
+The default setting for
+.Cm meshttl
+is 31.
+.It Cm meshpeering
+Enable or disable peering with neighbor mesh stations.
+Stations must peer before any data packets can be exchanged.
+By default
+.Cm meshpeering
+is enabled.
+.It Cm meshforward
+Enable or disable forwarding packets by a mesh interface.
+By default
+.Cm meshforward
+is enabled.
+.It Cm meshmetric Ar protocol
+Set the specified
+.Ar protocol
+as the link metric protocol used on a mesh network.
+The default protocol is called
+.Ar AIRTIME .
+The mesh interface will restart after changing this setting.
+.It Cm meshpath Ar protocol
+Set the specified
+.Ar protocol
+as the path selection protocol used on a mesh network.
+The only available protocol at the moment is called
+.Ar HWMP
+(Hybrid Wireless Mesh Protocol).
+The mesh interface will restart after changing this setting.
+.It Cm hwmprootmode Ar mode
+Stations on a mesh network can operate as ``root nodes.''
+Root nodes try to find paths to all mesh nodes and advertise themselves
+regularly.
+When there is a root mesh node on a network, other mesh nodes can setup
+paths between themselves faster because they can use the root node
+to find the destination.
+This path may not be the best, but on-demand
+routing will eventually find the best path.
+The following modes are recognized:
+.Pp
+.Bl -tag -width ".Cm PROACTIVE" -compact
+.It Cm DISABLED
+Disable root mode.
+.It Cm NORMAL
+Send broadcast path requests every two seconds.
+Nodes on the mesh without a path to this root mesh station with try to
+discover a path to us.
+.It Cm PROACTIVE
+Send broadcast path requests every two seconds and every node must reply with
+with a path reply even if it already has a path to this root mesh station,
+.It Cm RANN
+Send broadcast root annoucement (RANN) frames.
+Nodes on the mesh without a path to this root mesh station with try to
+discover a path to us.
+.El
+By default
+.Cm hwmprootmode 
+is set to
+.Ar DISABLED .
+.It Cm hwmpmaxhops Ar cnt
+Set the maximum number of hops allowed in an HMWP path to
+.Ar cnt .
+The default setting for
+.Cm hwmpmaxhops
+is 31.
+.El
+.Pp
 The following parameters are for compatibility with other systems:
 .Bl -tag -width indent
 .It Cm nwid Ar ssid

sbin/ifconfig/ifieee80211.c

@@ -81,6 +81,7 @@
 #include <net80211/ieee80211_freebsd.h>
 #include <net80211/ieee80211_superg.h>
 #include <net80211/ieee80211_tdma.h>
+#include <net80211/ieee80211_mesh.h>
 
 #include <assert.h>
 #include <ctype.h>
@@ -162,6 +163,7 @@ static void print_channels(int, const struct ieee80211req_chaninfo *,
     int allchans, int verbose);
 static void regdomain_makechannels(struct ieee80211_regdomain_req *,
     const struct ieee80211_devcaps_req *);
+static const char *mesh_linkstate_string(uint8_t state);
 
 static struct ieee80211req_chaninfo *chaninfo;
 static struct ieee80211_regdomain regdomain;
@@ -574,6 +576,20 @@ set80211ssid(const char *val, int d, int s, const struct afswtch *rafp)
 	set80211(s, IEEE80211_IOC_SSID, ssid, len, data);
 }
 
+static void
+set80211meshid(const char *val, int d, int s, const struct afswtch *rafp)
+{
+	int		len;
+	u_int8_t	data[IEEE80211_NWID_LEN];
+
+	memset(data, 0, sizeof(data));
+	len = sizeof(data);
+	if (get_string(val, NULL, data, &len) == NULL)
+		exit(1);
+
+	set80211(s, IEEE80211_IOC_MESH_ID, 0, len, data);
+}	
+
 static void
 set80211stationname(const char *val, int d, int s, const struct afswtch *rafp)
 {
@@ -1261,6 +1277,66 @@ DECL_CMD_FUNC(set80211maccmd, val, d)
 	set80211(s, IEEE80211_IOC_MACCMD, d, 0, NULL);
 }
 
+static void
+set80211meshrtmac(int s, int req, const char *val)
+{
+	char *temp;
+	struct sockaddr_dl sdl;
+
+	temp = malloc(strlen(val) + 2); /* ':' and '\0' */
+	if (temp == NULL)
+		errx(1, "malloc failed");
+	temp[0] = ':';
+	strcpy(temp + 1, val);
+	sdl.sdl_len = sizeof(sdl);
+	link_addr(temp, &sdl);
+	free(temp);
+	if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
+		errx(1, "malformed link-level address");
+	set80211(s, IEEE80211_IOC_MESH_RTCMD, req,
+	    IEEE80211_ADDR_LEN, LLADDR(&sdl));
+}
+
+static
+DECL_CMD_FUNC(set80211addmeshrt, val, d)
+{
+	set80211meshrtmac(s, IEEE80211_MESH_RTCMD_ADD, val);
+}
+
+static
+DECL_CMD_FUNC(set80211delmeshrt, val, d)
+{
+	set80211meshrtmac(s, IEEE80211_MESH_RTCMD_DELETE, val);
+}
+
+static
+DECL_CMD_FUNC(set80211meshrtcmd, val, d)
+{
+	set80211(s, IEEE80211_IOC_MESH_RTCMD, d, 0, NULL);
+}
+
+static
+DECL_CMD_FUNC(set80211hwmprootmode, val, d)
+{
+	int mode;
+
+	if (strcasecmp(val, "normal") == 0)
+		mode = IEEE80211_HWMP_ROOTMODE_NORMAL;
+	else if (strcasecmp(val, "proactive") == 0)
+		mode = IEEE80211_HWMP_ROOTMODE_PROACTIVE;
+	else if (strcasecmp(val, "rann") == 0)
+		mode = IEEE80211_HWMP_ROOTMODE_RANN;
+	else
+		mode = IEEE80211_HWMP_ROOTMODE_DISABLED;
+	set80211(s, IEEE80211_IOC_HWMP_ROOTMODE, mode, 0, NULL);
+}
+
+static
+DECL_CMD_FUNC(set80211hwmpmaxhops, val, d)
+{
+	set80211(s, IEEE80211_IOC_HWMP_MAXHOPS, atoi(val), 0, NULL);
+}
+
 static void
 set80211pureg(const char *val, int d, int s, const struct afswtch *rafp)
 {
@@ -1771,6 +1847,42 @@ DECL_CMD_FUNC(set80211tdmabintval, val, d)
 	set80211(s, IEEE80211_IOC_TDMA_BINTERVAL, atoi(val), 0, NULL);
 }
 
+static
+DECL_CMD_FUNC(set80211meshttl, val, d)
+{
+	set80211(s, IEEE80211_IOC_MESH_TTL, atoi(val), 0, NULL);
+}
+
+static
+DECL_CMD_FUNC(set80211meshforward, val, d)
+{
+	set80211(s, IEEE80211_IOC_MESH_FWRD, atoi(val), 0, NULL);
+}
+
+static
+DECL_CMD_FUNC(set80211meshpeering, val, d)
+{
+	set80211(s, IEEE80211_IOC_MESH_AP, atoi(val), 0, NULL);
+}
+
+static
+DECL_CMD_FUNC(set80211meshmetric, val, d)
+{
+	char v[12];
+	
+	memcpy(v, val, sizeof(v));
+	set80211(s, IEEE80211_IOC_MESH_PR_METRIC, 0, 0, v);
+}
+
+static
+DECL_CMD_FUNC(set80211meshpath, val, d)
+{
+	char v[12];
+	
+	memcpy(v, val, sizeof(v));
+	set80211(s, IEEE80211_IOC_MESH_PR_PATH, 0, 0, v);
+}
+
 static int
 regdomain_sort(const void *a, const void *b)
 {
@@ -2498,6 +2610,45 @@ printathie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
 	}
 }
 
+
+static void
+printmeshconf(const char *tag, const uint8_t *ie, size_t ielen, int maxlen)
+{
+#define MATCHOUI(field, oui, string)					\
+do {									\
+	if (memcmp(field, oui, 4) == 0)					\
+		printf("%s", string);					\
+} while (0)
+
+	printf("%s", tag);
+	if (verbose) {
+		const struct ieee80211_meshconf_ie *mconf =
+			(const struct ieee80211_meshconf_ie *)ie;
+		const uint8_t null[4] = IEEE80211_MESHCONF_NULL;
+		const uint8_t hwmp[4] = IEEE80211_MESHCONF_HWMP;
+		const uint8_t airtime[4] = IEEE80211_MESHCONF_AIRTIME;
+		const uint8_t ccsig[4] = IEEE80211_MESHCONF_CCSIG;
+		const uint8_t sae[4] = IEEE80211_MESHCONF_SAE;
+		const uint8_t neighoff[4] = IEEE80211_MESHCONF_SAE;
+		printf("<v%d PATH:", mconf->conf_ver);
+		MATCHOUI(mconf->conf_pselid, hwmp, "HWMP");
+		printf(" LINK:");
+		MATCHOUI(mconf->conf_pmetid, airtime, "AIRTIME");
+		printf(" CONGESTION:");
+		MATCHOUI(mconf->conf_ccid, ccsig, "SIG");
+		MATCHOUI(mconf->conf_ccid, null, "NULL");
+		printf(" SYNC:");
+		MATCHOUI(mconf->conf_syncid, neighoff, "NEIGHOFF");
+		MATCHOUI(mconf->conf_syncid, null, "NULL");
+		printf(" AUTH:");
+		MATCHOUI(mconf->conf_authid, sae, "SAE");
+		MATCHOUI(mconf->conf_authid, null, "NULL");
+		printf(" FORM:0x%x CAPS:0x%x>", mconf->conf_form,
+		    mconf->conf_cap);
+	}
+#undef MATCHOUI
+}
+
 static const char *
 wpa_cipher(const u_int8_t *sel)
 {
@@ -2968,6 +3119,13 @@ printies(const u_int8_t *vp, int ielen, int maxcols)
 			if (verbose)
 				printhtinfo(" HTINFO", vp, 2+vp[1], maxcols);
 			break;
+		case IEEE80211_ELEMID_MESHID:
+			if (verbose)
+				printssid(" MESHID", vp, 2+vp[1], maxcols);
+			break;
+		case IEEE80211_ELEMID_MESHCONF:
+			printmeshconf(" MESHCONF", vp, 2+vp[1], maxcols);
+			break;
 		default:
 			if (verbose)
 				printie(iename(vp[0]), vp, 2+vp[1], maxcols);
@@ -2996,7 +3154,7 @@ list_scan(int s)
 	uint8_t buf[24*1024];
 	char ssid[IEEE80211_NWID_LEN+1];
 	const uint8_t *cp;
-	int len, ssidmax;
+	int len, ssidmax, idlen;
 
 	if (get80211len(s, IEEE80211_IOC_SCAN_RESULTS, buf, sizeof(buf), &len) < 0)
 		errx(1, "unable to get scan results");
@@ -3005,9 +3163,9 @@ list_scan(int s)
 
 	getchaninfo(s);
 
-	ssidmax = verbose ? IEEE80211_NWID_LEN : 14;
+	ssidmax = verbose ? IEEE80211_NWID_LEN - 1 : 14;
 	printf("%-*.*s  %-17.17s  %4s %4s  %-7s  %3s %4s\n"
-		, ssidmax, ssidmax, "SSID"
+		, ssidmax, ssidmax, "SSID/MESH ID"
 		, "BSSID"
 		, "CHAN"
 		, "RATE"
@@ -3018,13 +3176,20 @@ list_scan(int s)
 	cp = buf;
 	do {
 		const struct ieee80211req_scan_result *sr;
-		const uint8_t *vp;
+		const uint8_t *vp, *idp;
 
 		sr = (const struct ieee80211req_scan_result *) cp;
 		vp = cp + sr->isr_ie_off;
+		if (sr->isr_meshid_len) {
+			idp = vp + sr->isr_ssid_len;
+			idlen = sr->isr_meshid_len;
+		} else {
+			idp = vp;
+			idlen = sr->isr_ssid_len;
+		}
 		printf("%-*.*s  %s  %3d  %3dM %3d:%-3d  %3d %-4.4s"
 			, ssidmax
-			  , copy_essid(ssid, ssidmax, vp, sr->isr_ssid_len)
+			  , copy_essid(ssid, ssidmax, idp, idlen)
 			  , ssid
 			, ether_ntoa((const struct ether_addr *) sr->isr_bssid)
 			, ieee80211_mhz2ieee(sr->isr_freq, sr->isr_flags)
@@ -3033,7 +3198,8 @@ list_scan(int s)
 			, sr->isr_intval
 			, getcaps(sr->isr_capinfo)
 		);
-		printies(vp + sr->isr_ssid_len, sr->isr_ie_len, 24);
+		printies(vp + sr->isr_ssid_len + sr->isr_meshid_len,
+		    sr->isr_ie_len, 24);
 		printf("\n");
 		cp += sr->isr_len, len -= sr->isr_len;
 	} while (len >= sizeof(struct ieee80211req_scan_result));
@@ -3151,18 +3317,32 @@ list_stations(int s)
 
 	getchaninfo(s);
 
-	printf("%-17.17s %4s %4s %4s %4s %4s %6s %6s %4s %-7s\n"
-		, "ADDR"
-		, "AID"
-		, "CHAN"
-		, "RATE"
-		, "RSSI"
-		, "IDLE"
-		, "TXSEQ"
-		, "RXSEQ"
-		, "CAPS"
-		, "FLAG"
-	);
+	if (opmode == IEEE80211_M_MBSS)
+		printf("%-17.17s %4s %5s %5s %7s %4s %4s %4s %6s %6s\n"
+			, "ADDR"
+			, "CHAN"
+			, "LOCAL"
+			, "PEER"
+			, "STATE"
+			, "RATE"
+			, "RSSI"
+			, "IDLE"
+			, "TXSEQ"
+			, "RXSEQ"
+		);
+	else 
+		printf("%-17.17s %4s %4s %4s %4s %4s %6s %6s %4s %-7s\n"
+			, "ADDR"
+			, "AID"
+			, "CHAN"
+			, "RATE"
+			, "RSSI"
+			, "IDLE"
+			, "TXSEQ"
+			, "RXSEQ"
+			, "CAPS"
+			, "FLAG"
+		);
 	cp = (const uint8_t *) u.req.info;
 	do {
 		const struct ieee80211req_sta_info *si;
@@ -3170,18 +3350,36 @@ list_stations(int s)
 		si = (const struct ieee80211req_sta_info *) cp;
 		if (si->isi_len < sizeof(*si))
 			break;
-		printf("%s %4u %4d %3dM %3.1f %4d %6d %6d %-4.4s %-7.7s"
-			, ether_ntoa((const struct ether_addr*) si->isi_macaddr)
-			, IEEE80211_AID(si->isi_associd)
-			, ieee80211_mhz2ieee(si->isi_freq, si->isi_flags)
-			, si->isi_txmbps/2
-			, si->isi_rssi/2.
-			, si->isi_inact
-			, gettxseq(si)
-			, getrxseq(si)
-			, getcaps(si->isi_capinfo)
-			, getflags(si->isi_state)
-		);
+		if (opmode == IEEE80211_M_MBSS)
+			printf("%s %4d %5x %5x %7.7s %3dM %4.1f %4d %6d %6d"
+				, ether_ntoa((const struct ether_addr*)
+				    si->isi_macaddr)
+				, ieee80211_mhz2ieee(si->isi_freq,
+				    si->isi_flags)
+				, si->isi_localid
+				, si->isi_peerid
+				, mesh_linkstate_string(si->isi_peerstate)
+				, si->isi_txmbps/2
+				, si->isi_rssi/2.
+				, si->isi_inact
+				, gettxseq(si)
+				, getrxseq(si)
+			);
+		else 
+			printf("%s %4u %4d %3dM %4.1f %4d %6d %6d %-4.4s %-7.7s"
+				, ether_ntoa((const struct ether_addr*)
+				    si->isi_macaddr)
+				, IEEE80211_AID(si->isi_associd)
+				, ieee80211_mhz2ieee(si->isi_freq,
+				    si->isi_flags)
+				, si->isi_txmbps/2
+				, si->isi_rssi/2.
+				, si->isi_inact
+				, gettxseq(si)
+				, getrxseq(si)
+				, getcaps(si->isi_capinfo)
+				, getflags(si->isi_state)
+			);
 		printies(cp + si->isi_ie_off, si->isi_ie_len, 24);
 		printmimo(&si->isi_mimo);
 		printf("\n");
@@ -3189,6 +3387,28 @@ list_stations(int s)
 	} while (len >= sizeof(struct ieee80211req_sta_info));
 }
 
+static const char *
+mesh_linkstate_string(uint8_t state)
+{
+#define	N(a)	(sizeof(a) / sizeof(a[0]))
+	static const char *state_names[] = {
+	    [0] = "IDLE",
+	    [1] = "OPEN-TX",
+	    [2] = "OPEN-RX",
+	    [3] = "CONF-RX",
+	    [4] = "ESTAB",
+	    [5] = "HOLDING",
+	};
+
+	if (state >= N(state_names)) {
+		static char buf[10];
+		snprintf(buf, sizeof(buf), "#%u", state);
+		return buf;
+	} else
+		return state_names[state];
+#undef N
+}
+
 static const char *
 get_chaninfo(const struct ieee80211_channel *c, int precise,
 	char buf[], size_t bsize)
@@ -3409,9 +3629,9 @@ list_keys(int s)
 }
 
 #define	IEEE80211_C_BITS \
-	"\20\1STA\7FF\10TURBOP\11IBSS\12PMGT" \
+	"\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \
 	"\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \
-	"\21MONITOR\22DFS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \
+	"\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \
 	"\37TXFRAG\40TDMA"
 
 static void
@@ -3729,6 +3949,40 @@ list_regdomain(int s, int channelsalso)
 		print_regdomain(&regdomain, verbose);
 }
 
+static void
+list_mesh(int s)
+{
+	int i;
+	struct ieee80211req ireq;
+	struct ieee80211req_mesh_route routes[128];
+
+	(void) memset(&ireq, 0, sizeof(ireq));
+	(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
+	ireq.i_type = IEEE80211_IOC_MESH_RTCMD;
+	ireq.i_val = IEEE80211_MESH_RTCMD_LIST;
+	ireq.i_data = &routes;
+	ireq.i_len = sizeof(routes);
+	if (ioctl(s, SIOCG80211, &ireq) < 0)
+	 	err(1, "unable to get the Mesh routing table");
+
+	printf("%-17.17s %-17.17s %4s %4s %4s\n"
+		, "DEST"
+		, "NEXT HOP"
+		, "HOPS"
+		, "METRIC"
+		, "LIFETIME");
+
+	for (i = 0; i < ireq.i_len / sizeof(*routes); i++) {
+		printf("%s ",
+		    ether_ntoa((const struct ether_addr *)routes[i].imr_dest));
+		printf("%s %4u   %4d   %6d\n",
+			ether_ntoa((const struct ether_addr *)
+			    routes[i].imr_nexthop),
+			routes[i].imr_nhops, routes[i].imr_metric,
+			routes[i].imr_lifetime);
+	}
+}
+
 static
 DECL_CMD_FUNC(set80211list, arg, d)
 {
@@ -3762,6 +4016,8 @@ DECL_CMD_FUNC(set80211list, arg, d)
 		list_regdomain(s, 1);
 	else if (iseq(arg, "countries"))
 		list_countries();
+	else if (iseq(arg, "mesh"))
+		list_mesh(s);
 	else
 		errx(1, "Don't know how to list %s for %s", arg, name);
 	LINE_BREAK();
@@ -3787,6 +4043,8 @@ get80211opmode(int s)
 			return IEEE80211_M_HOSTAP;
 		if (ifmr.ifm_current & IFM_IEEE80211_MONITOR)
 			return IEEE80211_M_MONITOR;
+		if (ifmr.ifm_current & IFM_IEEE80211_MBSS)
+			return IEEE80211_M_MBSS;
 	}
 	return IEEE80211_M_STA;
 }
@@ -3911,13 +4169,13 @@ printrate(const char *tag, int v, int defrate, int defmcs)
 }
 
 static int
-getssid(int s, int ix, void *data, size_t len, int *plen)
+getid(int s, int ix, void *data, size_t len, int *plen, int mesh)
 {
 	struct ieee80211req ireq;
 
 	(void) memset(&ireq, 0, sizeof(ireq));
 	(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
-	ireq.i_type = IEEE80211_IOC_SSID;
+	ireq.i_type = (!mesh) ? IEEE80211_IOC_SSID : IEEE80211_IOC_MESH_ID;
 	ireq.i_val = ix;
 	ireq.i_data = data;
 	ireq.i_len = len;
@@ -3938,7 +4196,7 @@ ieee80211_status(int s)
 	const struct ieee80211_roamparam *rp;
 	const struct ieee80211_txparam *tp;
 
-	if (getssid(s, -1, data, sizeof(data), &len) < 0) {
+	if (getid(s, -1, data, sizeof(data), &len, 0) < 0) {
 		/* If we can't get the SSID, this isn't an 802.11 device. */
 		return;
 	}
@@ -3953,19 +4211,25 @@ ieee80211_status(int s)
 	gothtconf = 0;
 	gotregdomain = 0;
 
-	if (get80211val(s, IEEE80211_IOC_NUMSSIDS, &num) < 0)
-		num = 0;
-	printf("\tssid ");
-	if (num > 1) {
-		for (i = 0; i < num; i++) {
-			if (getssid(s, i, data, sizeof(data), &len) >= 0 && len > 0) {
-				printf(" %d:", i + 1);
-				print_string(data, len);
-			}
-		}
-	} else
+	printf("\t");
+	if (opmode == IEEE80211_M_MBSS) {
+		printf("meshid ");
+		getid(s, 0, data, sizeof(data), &len, 1);
 		print_string(data, len);
-
+	} else {
+		if (get80211val(s, IEEE80211_IOC_NUMSSIDS, &num) < 0)
+			num = 0;
+		printf("ssid ");
+		if (num > 1) {
+			for (i = 0; i < num; i++) {
+				if (getid(s, i, data, sizeof(data), &len, 0) >= 0 && len > 0) {
+					printf(" %d:", i + 1);
+					print_string(data, len);
+				}
+			}
+		} else
+			print_string(data, len);
+	}
 	c = getcurchan(s);
 	if (c->ic_freq != IEEE80211_CHAN_ANY) {
 		char buf[14];
@@ -4515,6 +4779,57 @@ end:
 		LINE_BREAK();
 		list_wme(s);
 	}
+
+	if (opmode == IEEE80211_M_MBSS) {
+		if (get80211val(s, IEEE80211_IOC_MESH_TTL, &val) != -1) {
+			LINE_CHECK("meshttl %u", val);
+		}
+		if (get80211val(s, IEEE80211_IOC_MESH_AP, &val) != -1) {
+			if (val)
+				LINE_CHECK("meshpeering");
+			else
+				LINE_CHECK("-meshpeering");
+		}
+		if (get80211val(s, IEEE80211_IOC_MESH_FWRD, &val) != -1) {
+			if (val)
+				LINE_CHECK("meshforward");
+			else
+				LINE_CHECK("-meshforward");
+		}
+		if (get80211len(s, IEEE80211_IOC_MESH_PR_METRIC, data, 12,
+		    &len) != -1) {
+			data[len] = '\0';
+			LINE_CHECK("meshmetric %s", data);
+		}
+		if (get80211len(s, IEEE80211_IOC_MESH_PR_PATH, data, 12,
+		    &len) != -1) {
+			data[len] = '\0';
+			LINE_CHECK("meshpath %s", data);
+		}
+		if (get80211val(s, IEEE80211_IOC_HWMP_ROOTMODE, &val) != -1) {
+			switch (val) {
+			case IEEE80211_HWMP_ROOTMODE_DISABLED:
+				LINE_CHECK("hwmprootmode DISABLED");
+				break;
+			case IEEE80211_HWMP_ROOTMODE_NORMAL:
+				LINE_CHECK("hwmprootmode NORMAL");
+				break;
+			case IEEE80211_HWMP_ROOTMODE_PROACTIVE:
+				LINE_CHECK("hwmprootmode PROACTIVE");
+				break;
+			case IEEE80211_HWMP_ROOTMODE_RANN:
+				LINE_CHECK("hwmprootmode RANN");
+				break;
+			default:
+				LINE_CHECK("hwmprootmode UNKNOWN(%d)", val);
+				break;
+			}
+		}
+		if (get80211val(s, IEEE80211_IOC_HWMP_MAXHOPS, &val) != -1) {
+			LINE_CHECK("hwmpmaxhops %u", val);
+		}
+	}
+
 	LINE_BREAK();
 }
 
@@ -4731,7 +5046,9 @@ DECL_CMD_FUNC(set80211clone_wlanmode, arg, d)
 	else if (iseq(arg, "tdma")) {
 		params.icp_opmode = IEEE80211_M_AHDEMO;
 		params.icp_flags |= IEEE80211_CLONE_TDMA;
-	} else
+	} else if (iseq(arg, "mesh") || iseq(arg, "mp")) /* mesh point */
+		params.icp_opmode = IEEE80211_M_MBSS;
+	else
 		errx(1, "Don't know to create %s for %s", arg, name);
 #undef iseq
 }
@@ -4767,6 +5084,7 @@ set80211clone_wdslegacy(const char *val, int d, int s, const struct afswtch *raf
 static struct cmd ieee80211_cmds[] = {
 	DEF_CMD_ARG("ssid",		set80211ssid),
 	DEF_CMD_ARG("nwid",		set80211ssid),
+	DEF_CMD_ARG("meshid",		set80211meshid),
 	DEF_CMD_ARG("stationname",	set80211stationname),
 	DEF_CMD_ARG("station",		set80211stationname),	/* BSD/OS */
 	DEF_CMD_ARG("channel",		set80211channel),
@@ -4908,6 +5226,19 @@ static struct cmd ieee80211_cmds[] = {
 	DEF_CMD_ARG("tdmaslotlen",	set80211tdmaslotlen),
 	DEF_CMD_ARG("tdmabintval",	set80211tdmabintval),
 
+	DEF_CMD_ARG("meshttl",		set80211meshttl),
+	DEF_CMD("meshforward",	1,	set80211meshforward),
+	DEF_CMD("-meshforward",	0,	set80211meshforward),
+	DEF_CMD("meshpeering",	1,	set80211meshpeering),
+	DEF_CMD("-meshpeering",	0,	set80211meshpeering),
+	DEF_CMD_ARG("meshmetric",	set80211meshmetric),
+	DEF_CMD_ARG("meshpath",		set80211meshpath),
+	DEF_CMD("meshrt:flush",	IEEE80211_MESH_RTCMD_FLUSH,	set80211meshrtcmd),
+	DEF_CMD_ARG("meshrt:add",	set80211addmeshrt),
+	DEF_CMD_ARG("meshrt:del",	set80211delmeshrt),
+	DEF_CMD_ARG("hwmprootmode",	set80211hwmprootmode),
+	DEF_CMD_ARG("hwmpmaxhops",	set80211hwmpmaxhops),
+
 	/* vap cloning support */
 	DEF_CLONE_CMD_ARG("wlanaddr",	set80211clone_wlanaddr),
 	DEF_CLONE_CMD_ARG("wlanbssid",	set80211clone_wlanbssid),

sbin/ifconfig/ifmedia.c

@@ -104,7 +104,8 @@ static struct ifmedia_description *get_subtype_desc(int,
 
 #define	IFM_OPMODE(x) \
 	((x) & (IFM_IEEE80211_ADHOC | IFM_IEEE80211_HOSTAP | \
-	 IFM_IEEE80211_IBSS | IFM_IEEE80211_WDS | IFM_IEEE80211_MONITOR))
+	 IFM_IEEE80211_IBSS | IFM_IEEE80211_WDS | IFM_IEEE80211_MONITOR | \
+	 IFM_IEEE80211_MBSS))
 #define	IFM_IEEE80211_STA	0
 
 static void

share/man/man4/ath.4

@@ -28,7 +28,7 @@
 .\"
 .\" $FreeBSD$
 .\"/
-.Dd March 25, 2009
+.Dd July 8, 2009
 .Dt ATH 4
 .Os
 .Sh NAME
@@ -61,7 +61,7 @@ These APIs are used by a wide variety of chips; most all chips with
 a PCI and/or CardBus interface are supported.
 .Pp
 Supported features include 802.11 and 802.3 frames, power management, BSS,
-IBSS, TDMA, and host-based access point operation modes.
+IBSS, MBSS, TDMA, and host-based access point operation modes.
 All host/device interaction is via DMA.
 .Pp
 The
@@ -102,6 +102,7 @@ The driver supports
 .Cm adhoc ,
 .Cm adhoc-demo ,
 .Cm hostap ,
+.Cm mesh ,
 .Cm wds ,
 and
 .Cm monitor
@@ -175,6 +176,12 @@ ifconfig wlan0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
 	mode 11g
 .Ed
 .Pp
+Create an 802.11a mesh station:
+.Bd -literal -offset indent
+ifconfig wlan0 create wlandev ath0 wlanmode mesh
+ifconfig wlan0 meshid my_mesh mode 11a inet 192.168.0.10/24
+.Ed
+.Pp
 Create two virtual 802.11a host-based access points, one with
 with WEP enabled and one with no security, and bridge them to
 the fxp0 (wired) device:

share/man/man4/mwl.4

@@ -28,7 +28,7 @@
 .\"
 .\" $FreeBSD$
 .\"/
-.Dd June 9, 2009
+.Dd July 8, 2009
 .Dt MWL 4
 .Os
 .Sh NAME
@@ -64,7 +64,7 @@ module to work.
 Normally this module is loaded on demand by the driver but it may
 also be compiled into the kernel.
 .Pp
-Supported features include 802.11n, power management, BSS,
+Supported features include 802.11n, power management, BSS, MBSS,
 and host-based access point operation modes.
 All host/device interaction is via DMA.
 .Pp
@@ -83,6 +83,7 @@ AES-CCM, TKIP, and Michael cryptographic operations.
 The driver supports
 .Cm station ,
 .Cm hostap ,
+.Cm mesh ,
 and
 .Cm wds
 mode operation.
@@ -139,6 +140,12 @@ ifconfig wlan0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
 	mode 11g
 .Ed
 .Pp
+Create an 802.11a mesh station:
+.Bd -literal -offset indent
+ifconfig wlan0 create wlandev mwl0 wlanmode mesh
+ifconfig wlan0 meshid my_mesh mode 11a inet 192.168.0.10/24
+.Ed
+.Pp
 Create two virtual 802.11a host-based access points, one with
 with WEP enabled and one with no security, and bridge them to
 the fxp0 (wired) device:

share/man/man4/ral.4

@@ -15,7 +15,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd April 13, 2008
+.Dd July 8, 2009
 .Os
 .Dt RAL 4
 .Sh NAME
@@ -72,12 +72,15 @@ supports
 .Cm station ,
 .Cm adhoc ,
 .Cm hostap ,
+.Cm mesh ,
 .Cm wds ,
 and
 .Cm monitor
 mode operation.
 Only one
 .Cm hostap
+or
+.Cm mesh
 virtual interface may be configured at a time.
 Any number of 
 .Cm wds

share/man/man4/wlan.4

@@ -25,7 +25,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd May 15, 2009
+.Dd July 8, 2009
 .Dt WLAN 4
 .Os
 .Sh NAME
@@ -48,7 +48,7 @@ support.
 .Nm
 supports multi-mode devices capable of
 operating in both 2.4GHz and 5GHz bands and supports numerous
-802.11 standards: 802.11a, 802.11b, 802.11g, and 802.11n.
+802.11 standards: 802.11a, 802.11b, 802.11g, 802.11n, and 802.11s (Draft 3.0).
 The WPA, 802.11i, and 802.1x security protocols are supported
 through a combination of in-kernel code and user-mode applications.
 The WME/WMM multi-media protocols are supported entirely within
@@ -83,6 +83,8 @@ A client station in an infrastructure bss
 (i.e. one that associates to an access point).
 .It Cm hostap
 An access point in an infrastructure bss.
+.It Cm mesh
+A mesh station in an MBSS network.
 .It Cm adhoc
 A station in an IBSS network.
 .It Cm ahdemo
@@ -115,8 +117,6 @@ interface that does not send beacon frames before
 interfaces may be created.
 .El
 .Pp
-More types are planned to support
-802.11s mesh nodes (station and ap).
 Note that an interface's type cannot be changed once it is created.
 .Pp
 .Nm
@@ -161,6 +161,12 @@ The module name of
 .Nm
 was used to be compatible with
 .Nx .
+.Pp
+Mesh stations follow the 802.11s Draft 3.0 specification which is
+not ratified and subject to change.
+Beware that this specification is incompatible with earlier drafts;
+and stations implementing earlier drafts (e.g. Linux)
+may not interoperate.
 .Sh SEE ALSO
 .Xr an 4 ,
 .Xr ath 4 ,

sys/amd64/conf/GENERIC

@@ -258,6 +258,7 @@ device		xe		# Xircom pccard Ethernet
 device		wlan		# 802.11 support
 options 	IEEE80211_DEBUG	# enable debug msgs
 options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
+options 	IEEE80211_SUPPORT_MESH	# enable 802.11s D3.0 support
 device		wlan_wep	# 802.11 WEP support
 device		wlan_ccmp	# 802.11 CCMP support
 device		wlan_tkip	# 802.11 TKIP support

sys/conf/NOTES

@@ -738,6 +738,8 @@ device		vlan
 device		wlan
 options 	IEEE80211_DEBUG		#enable debugging msgs
 options 	IEEE80211_AMPDU_AGE	#age frames in AMPDU reorder q's
+options 	IEEE80211_SUPPORT_MESH	#enable 802.11s D3.0 support
+options 	IEEE80211_SUPPORT_TDMA	#enable TDMA support
 
 #  The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide
 #  support for WEP, TKIP, and AES-CCMP crypto protocols optionally

sys/conf/files

@@ -2239,6 +2239,7 @@ net80211/ieee80211_acl.c	optional wlan wlan_acl
 net80211/ieee80211_action.c	optional wlan
 net80211/ieee80211_ageq.c	optional wlan
 net80211/ieee80211_adhoc.c	optional wlan
+net80211/ieee80211_ageq.c	optional wlan
 net80211/ieee80211_amrr.c	optional wlan wlan_amrr
 net80211/ieee80211_crypto.c	optional wlan
 net80211/ieee80211_crypto_ccmp.c optional wlan wlan_ccmp
@@ -2250,8 +2251,10 @@ net80211/ieee80211_dfs.c	optional wlan
 net80211/ieee80211_freebsd.c	optional wlan
 net80211/ieee80211_hostap.c	optional wlan
 net80211/ieee80211_ht.c		optional wlan
+net80211/ieee80211_hwmp.c	optional wlan ieee80211_support_mesh
 net80211/ieee80211_input.c	optional wlan
 net80211/ieee80211_ioctl.c	optional wlan
+net80211/ieee80211_mesh.c	optional wlan ieee80211_support_mesh
 net80211/ieee80211_monitor.c	optional wlan
 net80211/ieee80211_node.c	optional wlan
 net80211/ieee80211_output.c	optional wlan

sys/conf/options

@@ -804,6 +804,7 @@ INTR_FILTER
 IEEE80211_DEBUG		opt_wlan.h
 IEEE80211_DEBUG_REFCNT	opt_wlan.h
 IEEE80211_AMPDU_AGE	opt_wlan.h
+IEEE80211_SUPPORT_MESH	opt_wlan.h
 IEEE80211_SUPPORT_SUPERG	opt_wlan.h
 IEEE80211_SUPPORT_TDMA	opt_wlan.h
 

sys/dev/ath/if_ath.c

@@ -578,6 +578,7 @@ ath_attach(u_int16_t devid, struct ath_softc *sc)
 		| IEEE80211_C_MONITOR		/* monitor mode */
 		| IEEE80211_C_AHDEMO		/* adhoc demo mode */
 		| IEEE80211_C_WDS		/* 4-address traffic works */
+		| IEEE80211_C_MBSS		/* mesh point link mode */
 		| IEEE80211_C_SHPREAMBLE	/* short preamble supported */
 		| IEEE80211_C_SHSLOT		/* short slot time supported */
 		| IEEE80211_C_WPA		/* capable of WPA1+WPA2 */
@@ -655,6 +656,7 @@ ath_attach(u_int16_t devid, struct ath_softc *sc)
 	if (ath_hal_hasbursting(ah))
 		ic->ic_caps |= IEEE80211_C_BURST;
 	sc->sc_hasbmask = ath_hal_hasbssidmask(ah);
+	sc->sc_hasbmatch = ath_hal_hasbssidmatch(ah);
 	sc->sc_hastsfadd = ath_hal_hastsfadjust(ah);
 	if (ath_hal_hasfastframes(ah))
 		ic->ic_caps |= IEEE80211_C_FF;
@@ -918,6 +920,7 @@ ath_vap_create(struct ieee80211com *ic,
 		}
 		break;
 	case IEEE80211_M_HOSTAP:
+	case IEEE80211_M_MBSS:
 		needbeacon = 1;
 		break;
 	case IEEE80211_M_WDS:
@@ -936,7 +939,6 @@ ath_vap_create(struct ieee80211com *ic,
 			ic_opmode = IEEE80211_M_HOSTAP;
 		else
 			ic_opmode = ic->ic_opmode;
-		break;
 	default:
 		device_printf(sc->sc_dev, "unknown opmode %d\n", opmode);
 		goto bad;
@@ -950,7 +952,7 @@ ath_vap_create(struct ieee80211com *ic,
 	}
 
 	/* STA, AHDEMO? */
-	if (opmode == IEEE80211_M_HOSTAP) {
+	if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS) {
 		assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID);
 		ath_hal_setbssidmask(sc->sc_ah, sc->sc_hwbssidmask);
 	}
@@ -1042,6 +1044,7 @@ ath_vap_create(struct ieee80211com *ic,
 		/* fall thru... */
 #endif
 	case IEEE80211_M_HOSTAP:
+	case IEEE80211_M_MBSS:
 		sc->sc_opmode = HAL_M_HOSTAP;
 		break;
 	case IEEE80211_M_MONITOR:
@@ -1129,7 +1132,8 @@ ath_vap_delete(struct ieee80211vap *vap)
 		sc->sc_nstavaps--;
 		if (sc->sc_nstavaps == 0 && sc->sc_swbmiss)
 			sc->sc_swbmiss = 0;
-	} else if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
+	} else if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
+	    vap->iv_opmode == IEEE80211_M_MBSS) {
 		reclaim_address(sc, vap->iv_myaddr);
 		ath_hal_setbssidmask(ah, sc->sc_hwbssidmask);
 	}
@@ -2330,7 +2334,7 @@ ath_key_update_end(struct ieee80211vap *vap)
  *   NB: older hal's add rx filter bits out of sight and we need to
  *	 blindly preserve them
  * o probe request frames are accepted only when operating in
- *   hostap, adhoc, or monitor modes
+ *   hostap, adhoc, mesh, or monitor modes
  * o enable promiscuous mode
  *   - when in monitor mode
  *   - if interface marked PROMISC (assumes bridge setting is filtered)
@@ -2343,6 +2347,7 @@ ath_key_update_end(struct ieee80211vap *vap)
  *   - when doing s/w beacon miss (e.g. for ap+sta)
  *   - when operating in ap mode in 11g to detect overlapping bss that
  *     require protection
+ *   - when operating in mesh mode to detect neighbors
  * o accept control frames:
  *   - when in monitor mode
  * XXX BAR frames for 11n
@@ -2375,6 +2380,13 @@ ath_calcrxfilter(struct ath_softc *sc)
 	if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
 	    IEEE80211_IS_CHAN_ANYG(ic->ic_curchan))
 		rfilt |= HAL_RX_FILTER_BEACON;
+	if (ic->ic_opmode == IEEE80211_M_MBSS) {
+		rfilt |= HAL_RX_FILTER_BEACON;
+		if (sc->sc_hasbmatch)
+			rfilt |= HAL_RX_FILTER_BSSID;
+		else
+			rfilt |= HAL_RX_FILTER_PROM;
+	}
 	if (ic->ic_opmode == IEEE80211_M_MONITOR)
 		rfilt |= HAL_RX_FILTER_CONTROL;
 	DPRINTF(sc, ATH_DEBUG_MODE, "%s: RX filter 0x%x, %s if_flags 0x%x\n",
@@ -2500,7 +2512,8 @@ ath_updateslot(struct ifnet *ifp)
 	 * immediately.  For other operation we defer the change
 	 * until beacon updates have propagated to the stations.
 	 */
-	if (ic->ic_opmode == IEEE80211_M_HOSTAP)
+	if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
+	    ic->ic_opmode == IEEE80211_M_MBSS)
 		sc->sc_updateslot = UPDATE;
 	else
 		ath_setslottime(sc);
@@ -2535,7 +2548,8 @@ ath_beaconq_config(struct ath_softc *sc)
 	HAL_TXQ_INFO qi;
 
 	ath_hal_gettxqueueprops(ah, sc->sc_bhalq, &qi);
-	if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
+	if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
+	    ic->ic_opmode == IEEE80211_M_MBSS) {
 		/*
 		 * Always burst out beacon and CAB traffic.
 		 */
@@ -3087,9 +3101,10 @@ ath_beacon_config(struct ath_softc *sc, struct ieee80211vap *vap)
 	/* extract tstamp from last beacon and convert to TU */
 	nexttbtt = TSF_TO_TU(LE_READ_4(ni->ni_tstamp.data + 4),
 			     LE_READ_4(ni->ni_tstamp.data));
-	if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
+	if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
+	    ic->ic_opmode == IEEE80211_M_MBSS) {
 		/*
-		 * For multi-bss ap support beacons are either staggered
+		 * For multi-bss ap/mesh support beacons are either staggered
 		 * evenly over N slots or burst together.  For the former
 		 * arrange for the SWBA to be delivered for each slot.
 		 * Slots that are not occupied will generate nothing.
@@ -3230,10 +3245,11 @@ ath_beacon_config(struct ath_softc *sc, struct ieee80211vap *vap)
 				} while (nexttbtt < tsftu);
 			}
 			ath_beaconq_config(sc);
-		} else if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
+		} else if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
+		    ic->ic_opmode == IEEE80211_M_MBSS) {
 			/*
-			 * In AP mode we enable the beacon timers and
-			 * SWBA interrupts to prepare beacon frames.
+			 * In AP/mesh mode we enable the beacon timers
+			 * and SWBA interrupts to prepare beacon frames.
 			 */
 			intval |= HAL_BEACON_ENA;
 			sc->sc_imask |= HAL_INT_SWBA;	/* beacon prepare */
@@ -5602,6 +5618,7 @@ ath_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
 #endif
 		case IEEE80211_M_HOSTAP:
 		case IEEE80211_M_IBSS:
+		case IEEE80211_M_MBSS:
 			/*
 			 * Allocate and setup the beacon frame.
 			 *

sys/dev/ath/if_athvar.h

@@ -235,6 +235,7 @@ struct ath_softc {
 				sc_outdoor  : 1,/* outdoor operation */
 				sc_dturbo   : 1,/* dynamic turbo in use */
 				sc_hasbmask : 1,/* bssid mask support */
+				sc_hasbmatch: 1,/* bssid match disable support*/
 				sc_hastsfadd: 1,/* tsf adjust support */
 				sc_beacons  : 1,/* beacons running */
 				sc_swbmiss  : 1,/* sta mode using sw bmiss */

sys/dev/mwl/if_mwl.c

@@ -420,6 +420,7 @@ mwl_attach(uint16_t devid, struct mwl_softc *sc)
 		| IEEE80211_C_IBSS		/* ibss, nee adhoc, mode */
 		| IEEE80211_C_AHDEMO		/* adhoc demo mode */
 #endif
+		| IEEE80211_C_MBSS		/* mesh point link mode */
 		| IEEE80211_C_WDS		/* WDS supported */
 		| IEEE80211_C_SHPREAMBLE	/* short preamble supported */
 		| IEEE80211_C_SHSLOT		/* short slot time supported */
@@ -615,6 +616,7 @@ mwl_vap_create(struct ieee80211com *ic,
 	IEEE80211_ADDR_COPY(mac, mac0);
 	switch (opmode) {
 	case IEEE80211_M_HOSTAP:
+	case IEEE80211_M_MBSS:
 		if ((flags & IEEE80211_CLONE_MACADDR) == 0)
 			assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID);
 		hvap = mwl_hal_newvap(mh, MWL_HAL_AP, mac);
@@ -686,7 +688,7 @@ mwl_vap_create(struct ieee80211com *ic,
 	vap->iv_key_delete = mwl_key_delete;
 	vap->iv_key_set = mwl_key_set;
 #ifdef MWL_HOST_PS_SUPPORT
-	if (opmode == IEEE80211_M_HOSTAP) {
+	if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS) {
 		vap->iv_update_ps = mwl_update_ps;
 		mvp->mv_set_tim = vap->iv_set_tim;
 		vap->iv_set_tim = mwl_set_tim;
@@ -706,12 +708,14 @@ mwl_vap_create(struct ieee80211com *ic,
 
 	switch (vap->iv_opmode) {
 	case IEEE80211_M_HOSTAP:
+	case IEEE80211_M_MBSS:
 	case IEEE80211_M_STA:
 		/*
 		 * Setup sta db entry for local address.
 		 */
 		mwl_localstadb(vap);
-		if (vap->iv_opmode == IEEE80211_M_HOSTAP)
+		if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
+		    vap->iv_opmode == IEEE80211_M_MBSS)
 			sc->sc_napvaps++;
 		else
 			sc->sc_nstavaps++;
@@ -753,11 +757,12 @@ mwl_vap_delete(struct ieee80211vap *vap)
 	ieee80211_vap_detach(vap);
 	switch (opmode) {
 	case IEEE80211_M_HOSTAP:
+	case IEEE80211_M_MBSS:
 	case IEEE80211_M_STA:
 		KASSERT(hvap != NULL, ("no hal vap handle"));
 		(void) mwl_hal_delstation(hvap, vap->iv_myaddr);
 		mwl_hal_delvap(hvap);
-		if (opmode == IEEE80211_M_HOSTAP)
+		if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS)
 			sc->sc_napvaps--;
 		else
 			sc->sc_nstavaps--;
@@ -1281,6 +1286,7 @@ mwl_reset_vap(struct ieee80211vap *vap, int state)
 	/* re-setup beacons */
 	if (state == IEEE80211_S_RUN &&
 	    (vap->iv_opmode == IEEE80211_M_HOSTAP ||
+	     vap->iv_opmode == IEEE80211_M_MBSS ||
 	     vap->iv_opmode == IEEE80211_M_IBSS)) {
 		mwl_setapmode(vap, vap->iv_bss->ni_chan);
 		mwl_hal_setnprotmode(hvap,
@@ -4184,6 +4190,7 @@ mwl_localstadb(struct ieee80211vap *vap)
 			mwl_setglobalkeys(vap);
 		break;
 	case IEEE80211_M_HOSTAP:
+	case IEEE80211_M_MBSS:
 		error = mwl_hal_newstation(hvap, vap->iv_myaddr,
 		    0, 0, NULL, vap->iv_flags & IEEE80211_F_WME, 0);
 		if (error == 0)
@@ -4248,7 +4255,8 @@ mwl_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
 		(void) mwl_peerstadb(ni, 0, 0, NULL);
 	} else if (nstate == IEEE80211_S_CSA) {
 		/* XXX move to below? */
-		if (vap->iv_opmode == IEEE80211_M_HOSTAP)
+		if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
+		    vap->iv_opmode == IEEE80211_M_MBSS)
 			mwl_startcsa(vap);
 	} else if (nstate == IEEE80211_S_CAC) {
 		/* XXX move to below? */
@@ -4282,6 +4290,7 @@ mwl_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
 		mwl_localstadb(vap);
 		switch (vap->iv_opmode) {
 		case IEEE80211_M_HOSTAP:
+		case IEEE80211_M_MBSS:
 			if (ostate == IEEE80211_S_CAC) {
 				/* enable in-service radar detection */
 				mwl_hal_setradardetection(mh,

sys/dev/ral/rt2560.c

@@ -285,6 +285,7 @@ rt2560_attach(device_t dev, int id)
 		| IEEE80211_C_MONITOR		/* monitor mode */
 		| IEEE80211_C_AHDEMO		/* adhoc demo mode */
 		| IEEE80211_C_WDS		/* 4-address traffic works */
+		| IEEE80211_C_MBSS		/* mesh point link mode */
 		| IEEE80211_C_SHPREAMBLE	/* short preamble supported */
 		| IEEE80211_C_SHSLOT		/* short slot time supported */
 		| IEEE80211_C_WPA		/* capable of WPA1+WPA2 */
@@ -391,6 +392,8 @@ rt2560_vap_create(struct ieee80211com *ic,
 	case IEEE80211_M_AHDEMO:
 	case IEEE80211_M_MONITOR:
 	case IEEE80211_M_HOSTAP:
+	case IEEE80211_M_MBSS:
+		/* XXXRP: TBD */
 		if (!TAILQ_EMPTY(&ic->ic_vaps)) {
 			if_printf(ifp, "only 1 vap supported\n");
 			return NULL;
@@ -811,7 +814,8 @@ rt2560_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
 		}
 
 		if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
-		    vap->iv_opmode == IEEE80211_M_IBSS) {
+		    vap->iv_opmode == IEEE80211_M_IBSS ||
+		    vap->iv_opmode == IEEE80211_M_MBSS) {
 			m = ieee80211_beacon_alloc(ni, &rvp->ral_bo);
 			if (m == NULL) {
 				if_printf(ifp, "could not allocate beacon\n");
@@ -1343,7 +1347,8 @@ rt2560_beacon_expire(struct rt2560_softc *sc)
 	struct rt2560_tx_data *data;
 
 	if (ic->ic_opmode != IEEE80211_M_IBSS &&
-	    ic->ic_opmode != IEEE80211_M_HOSTAP)
+	    ic->ic_opmode != IEEE80211_M_HOSTAP &&
+	    ic->ic_opmode != IEEE80211_M_MBSS)
 		return;	
 
 	data = &sc->bcnq.data[sc->bcnq.next];
@@ -2690,7 +2695,8 @@ rt2560_init_locked(struct rt2560_softc *sc)
 	tmp = RT2560_DROP_PHY_ERROR | RT2560_DROP_CRC_ERROR;
 	if (ic->ic_opmode != IEEE80211_M_MONITOR) {
 		tmp |= RT2560_DROP_CTL | RT2560_DROP_VERSION_ERROR;
-		if (ic->ic_opmode != IEEE80211_M_HOSTAP)
+		if (ic->ic_opmode != IEEE80211_M_HOSTAP &&
+		    ic->ic_opmode != IEEE80211_M_MBSS)
 			tmp |= RT2560_DROP_TODS;
 		if (!(ifp->if_flags & IFF_PROMISC))
 			tmp |= RT2560_DROP_NOT_TO_ME;

sys/dev/ral/rt2661.c

@@ -287,6 +287,7 @@ rt2661_attach(device_t dev, int id)
 		| IEEE80211_C_MONITOR		/* monitor mode */
 		| IEEE80211_C_AHDEMO		/* adhoc demo mode */
 		| IEEE80211_C_WDS		/* 4-address traffic works */
+		| IEEE80211_C_MBSS		/* mesh point link mode */
 		| IEEE80211_C_SHPREAMBLE	/* short preamble supported */
 		| IEEE80211_C_SHSLOT		/* short slot time supported */
 		| IEEE80211_C_WPA		/* capable of WPA1+WPA2 */
@@ -387,6 +388,8 @@ rt2661_vap_create(struct ieee80211com *ic,
 	case IEEE80211_M_AHDEMO:
 	case IEEE80211_M_MONITOR:
 	case IEEE80211_M_HOSTAP:
+	case IEEE80211_M_MBSS:
+		/* XXXRP: TBD */
 		if (!TAILQ_EMPTY(&ic->ic_vaps)) {
 			if_printf(ifp, "only 1 vap supported\n");
 			return NULL;
@@ -818,7 +821,8 @@ rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
 		}
 
 		if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
-		    vap->iv_opmode == IEEE80211_M_IBSS) {
+		    vap->iv_opmode == IEEE80211_M_IBSS ||
+		    vap->iv_opmode == IEEE80211_M_MBSS) {
 			error = rt2661_prepare_beacon(sc, vap);
 			if (error != 0)
 				return error;
@@ -2428,7 +2432,8 @@ rt2661_init_locked(struct rt2661_softc *sc)
 	if (ic->ic_opmode != IEEE80211_M_MONITOR) {
 		tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR |
 		       RT2661_DROP_ACKCTS;
-		if (ic->ic_opmode != IEEE80211_M_HOSTAP)
+		if (ic->ic_opmode != IEEE80211_M_HOSTAP &&
+		    ic->ic_opmode != IEEE80211_M_MBSS)
 			tmp |= RT2661_DROP_TODS;
 		if (!(ifp->if_flags & IFF_PROMISC))
 			tmp |= RT2661_DROP_NOT_TO_ME;

sys/i386/conf/GENERIC

@@ -270,6 +270,7 @@ device		xe		# Xircom pccard Ethernet
 device		wlan		# 802.11 support
 options 	IEEE80211_DEBUG	# enable debug msgs
 options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
+options 	IEEE80211_SUPPORT_MESH	# enable 802.11s D3.0 support
 device		wlan_wep	# 802.11 WEP support
 device		wlan_ccmp	# 802.11 CCMP support
 device		wlan_tkip	# 802.11 TKIP support

sys/net/if_media.h

@@ -217,6 +217,7 @@ uint64_t	ifmedia_baudrate(int);
 #define	IFM_IEEE80211_WDS	0x00000800	/* Operate in WDS mode */
 #define	IFM_IEEE80211_TURBO	0x00001000	/* Operate in turbo mode */
 #define	IFM_IEEE80211_MONITOR	0x00002000	/* Operate in monitor mode */
+#define	IFM_IEEE80211_MBSS	0x00004000	/* Operate in MBSS mode */
 
 /* operating mode for multi-mode devices */
 #define	IFM_IEEE80211_11A	0x00010000	/* 5Ghz, OFDM mode */
@@ -509,6 +510,7 @@ struct ifmedia_description {
 	{ IFM_IEEE80211_WDS, "wds" },					\
 	{ IFM_IEEE80211_TURBO, "turbo" },				\
 	{ IFM_IEEE80211_MONITOR, "monitor" },				\
+	{ IFM_IEEE80211_MBSS, "mesh" },					\
 	{ 0, NULL },							\
 }
 

sys/net80211/_ieee80211.h

@@ -83,8 +83,9 @@ enum ieee80211_opmode {
 	IEEE80211_M_AHDEMO	= 3,	/* Old lucent compatible adhoc demo */
 	IEEE80211_M_HOSTAP	= 4,	/* Software Access Point */
 	IEEE80211_M_MONITOR	= 5,	/* Monitor mode */
+	IEEE80211_M_MBSS	= 6,	/* MBSS (Mesh Point) link */
 };
-#define	IEEE80211_OPMODE_MAX	(IEEE80211_M_MONITOR+1)
+#define	IEEE80211_OPMODE_MAX	(IEEE80211_M_MBSS+1)
 
 /*
  * 802.11g/802.11n protection mode.

sys/net80211/ieee80211.c

@@ -74,6 +74,9 @@ const int ieee80211_opcap[IEEE80211_OPMODE_MAX] = {
 	[IEEE80211_M_AHDEMO]	= IEEE80211_C_AHDEMO,
 	[IEEE80211_M_HOSTAP]	= IEEE80211_C_HOSTAP,
 	[IEEE80211_M_MONITOR]	= IEEE80211_C_MONITOR,
+#ifdef IEEE80211_SUPPORT_MESH
+	[IEEE80211_M_MBSS]	= IEEE80211_C_MBSS,
+#endif
 };
 
 static const uint8_t ieee80211broadcastaddr[IEEE80211_ADDR_LEN] =
@@ -960,6 +963,8 @@ addmedia(struct ifmedia *media, int caps, int addsta, int mode, int mword)
 		ADD(media, mword, mopt | IFM_IEEE80211_MONITOR);
 	if (caps & IEEE80211_C_WDS)
 		ADD(media, mword, mopt | IFM_IEEE80211_WDS);
+	if (caps & IEEE80211_C_MBSS)
+		ADD(media, mword, mopt | IFM_IEEE80211_MBSS);
 #undef ADD
 }
 
@@ -1264,6 +1269,9 @@ media_status(enum ieee80211_opmode opmode, const struct ieee80211_channel *chan)
 	case IEEE80211_M_WDS:
 		status |= IFM_IEEE80211_WDS;
 		break;
+	case IEEE80211_M_MBSS:
+		status |= IFM_IEEE80211_MBSS;
+		break;
 	}
 	if (IEEE80211_IS_CHAN_HTA(chan)) {
 		status |= IFM_IEEE80211_11NA;

sys/net80211/ieee80211.h

@@ -185,6 +185,7 @@ struct ieee80211_qosframe_addr4 {
 	(IEEE80211_SEQ_SUB(b, a+1) < IEEE80211_SEQ_BA_RANGE-1)
 
 #define	IEEE80211_NWID_LEN			32
+#define	IEEE80211_MESHID_LEN			32
 
 #define	IEEE80211_QOS_TXOP			0x00ff
 /* bit 8 is reserved */
@@ -705,6 +706,30 @@ enum {
 	IEEE80211_ELEMID_TPC		= 150,
 	IEEE80211_ELEMID_CCKM		= 156,
 	IEEE80211_ELEMID_VENDOR		= 221,	/* vendor private */
+
+	/*
+	 * 802.11s IEs based on D3.0 spec and were not assigned by
+	 * ANA. Beware changing them because some of them are being
+	 * kept compatible with Linux.
+	 */
+	IEEE80211_ELEMID_MESHCONF	= 51,
+	IEEE80211_ELEMID_MESHID		= 52,
+	IEEE80211_ELEMID_MESHLINK	= 35,
+	IEEE80211_ELEMID_MESHCNGST	= 36,
+	IEEE80211_ELEMID_MESHPEER	= 55,
+	IEEE80211_ELEMID_MESHCSA	= 38,
+	IEEE80211_ELEMID_MESHTIM	= 39,
+	IEEE80211_ELEMID_MESHAWAKEW	= 40,
+	IEEE80211_ELEMID_MESHBEACONT	= 41,
+	IEEE80211_ELEMID_MESHPANN	= 48,
+	IEEE80211_ELEMID_MESHRANN	= 49,
+	IEEE80211_ELEMID_MESHPREQ	= 68,
+	IEEE80211_ELEMID_MESHPREP	= 69,
+	IEEE80211_ELEMID_MESHPERR	= 70,
+	IEEE80211_ELEMID_MESHPU		= 53,
+	IEEE80211_ELEMID_MESHPUC	= 54,
+	IEEE80211_ELEMID_MESHAH		= 60, /* Abbreviated Handshake */
+	IEEE80211_ELEMID_MESHPEERVER	= 80, /* Peering Protocol Version */
 };
 
 struct ieee80211_tim_ie {
@@ -890,6 +915,17 @@ enum {
 	IEEE80211_REASON_SETUP_NEEDED		= 38,	/* 11e */
 	IEEE80211_REASON_TIMEOUT		= 39,	/* 11e */
 
+	/* values not yet allocated by ANA */
+	IEEE80211_REASON_PEER_LINK_CANCELED	= 2,	/* 11s */
+	IEEE80211_REASON_MESH_MAX_PEERS		= 3,	/* 11s */
+	IEEE80211_REASON_MESH_CPVIOLATION	= 4,	/* 11s */
+	IEEE80211_REASON_MESH_CLOSE_RCVD	= 5,	/* 11s */
+	IEEE80211_REASON_MESH_MAX_RETRIES	= 6,	/* 11s */
+	IEEE80211_REASON_MESH_CONFIRM_TIMEOUT	= 7,	/* 11s */
+	IEEE80211_REASON_MESH_INVALID_GTK	= 8,	/* 11s */
+	IEEE80211_REASON_MESH_INCONS_PARAMS	= 9,	/* 11s */
+	IEEE80211_REASON_MESH_INVALID_SECURITY	= 10,	/* 11s */
+
 	IEEE80211_STATUS_SUCCESS		= 0,
 	IEEE80211_STATUS_UNSPECIFIED		= 1,
 	IEEE80211_STATUS_CAPINFO		= 10,

sys/net80211/ieee80211_action.c

@@ -47,6 +47,7 @@ __FBSDID("$FreeBSD$");
 
 #include <net80211/ieee80211_var.h>
 #include <net80211/ieee80211_action.h>
+#include <net80211/ieee80211_mesh.h>
 
 static int
 send_inval(struct ieee80211_node *ni, int cat, int act, void *sa)
@@ -62,8 +63,6 @@ static ieee80211_send_action_func *ht_send_action[8] = {
 	send_inval, send_inval, send_inval, send_inval,
 	send_inval, send_inval, send_inval, send_inval,
 };
-/* NB: temporary until 802.11s support is added */
-#ifdef IEEE80211_ACTION_CAT_MESHPEERING
 static ieee80211_send_action_func *meshpl_send_action[8] = {
 	send_inval, send_inval, send_inval, send_inval,
 	send_inval, send_inval, send_inval, send_inval,
@@ -75,7 +74,6 @@ static ieee80211_send_action_func *hwmp_send_action[8] = {
 	send_inval, send_inval, send_inval, send_inval,
 	send_inval, send_inval, send_inval, send_inval,
 };
-#endif
 static ieee80211_send_action_func *vendor_send_action[8] = {
 	send_inval, send_inval, send_inval, send_inval,
 	send_inval, send_inval, send_inval, send_inval,
@@ -96,7 +94,6 @@ ieee80211_send_action_register(int cat, int act, ieee80211_send_action_func *f)
 			break;
 		ht_send_action[act] = f;
 		return 0;
-#ifdef IEEE80211_ACTION_CAT_MESHPEERING
 	case IEEE80211_ACTION_CAT_MESHPEERING:
 		if (act >= N(meshpl_send_action))
 			break;
@@ -112,7 +109,6 @@ ieee80211_send_action_register(int cat, int act, ieee80211_send_action_func *f)
 			break;
 		hwmp_send_action[act] = f;
 		return 0;
-#endif
 	case IEEE80211_ACTION_CAT_VENDOR:
 		if (act >= N(vendor_send_action))
 			break;
@@ -144,7 +140,6 @@ ieee80211_send_action(struct ieee80211_node *ni, int cat, int act, void *sa)
 		if (act < N(ht_send_action))
 			f = ht_send_action[act];
 		break;
-#ifdef IEEE80211_ACTION_CAT_MESHPEERING
 	case IEEE80211_ACTION_CAT_MESHPEERING:
 		if (act < N(meshpl_send_action))
 			f = meshpl_send_action[act];
@@ -157,7 +152,6 @@ ieee80211_send_action(struct ieee80211_node *ni, int cat, int act, void *sa)
 		if (act < N(hwmp_send_action))
 			f = hwmp_send_action[act];
 		break;
-#endif
 	case IEEE80211_ACTION_CAT_VENDOR:
 		if (act < N(vendor_send_action))
 			f = vendor_send_action[act];
@@ -182,7 +176,6 @@ static ieee80211_recv_action_func *ht_recv_action[8] = {
 	recv_inval, recv_inval, recv_inval, recv_inval,
 	recv_inval, recv_inval, recv_inval, recv_inval,
 };
-#ifdef IEEE80211_ACTION_CAT_MESHPEERING
 static ieee80211_recv_action_func *meshpl_recv_action[8] = {
 	recv_inval, recv_inval, recv_inval, recv_inval,
 	recv_inval, recv_inval, recv_inval, recv_inval,
@@ -194,7 +187,6 @@ static ieee80211_recv_action_func *hwmp_recv_action[8] = {
 	recv_inval, recv_inval, recv_inval, recv_inval,
 	recv_inval, recv_inval, recv_inval, recv_inval,
 };
-#endif
 static ieee80211_recv_action_func *vendor_recv_action[8] = {
 	recv_inval, recv_inval, recv_inval, recv_inval,
 	recv_inval, recv_inval, recv_inval, recv_inval,
@@ -215,7 +207,6 @@ ieee80211_recv_action_register(int cat, int act, ieee80211_recv_action_func *f)
 			break;
 		ht_recv_action[act] = f;
 		return 0;
-#ifdef IEEE80211_ACTION_CAT_MESHPEERING
 	case IEEE80211_ACTION_CAT_MESHPEERING:
 		if (act >= N(meshpl_recv_action))
 			break;
@@ -231,7 +222,6 @@ ieee80211_recv_action_register(int cat, int act, ieee80211_recv_action_func *f)
 			break;
 		hwmp_recv_action[act] = f;
 		return 0;
-#endif
 	case IEEE80211_ACTION_CAT_VENDOR:
 		if (act >= N(vendor_recv_action))
 			break;
@@ -267,7 +257,6 @@ ieee80211_recv_action(struct ieee80211_node *ni,
 		if (ia->ia_action < N(ht_recv_action))
 			f = ht_recv_action[ia->ia_action];
 		break;
-#ifdef IEEE80211_ACTION_CAT_MESHPEERING
 	case IEEE80211_ACTION_CAT_MESHPEERING:
 		if (ia->ia_action < N(meshpl_recv_action))
 			f = meshpl_recv_action[ia->ia_action];
@@ -280,7 +269,6 @@ ieee80211_recv_action(struct ieee80211_node *ni,
 		if (ia->ia_action < N(hwmp_recv_action))
 			f = hwmp_recv_action[ia->ia_action];
 		break;
-#endif
 	case IEEE80211_ACTION_CAT_VENDOR:
 		if (ia->ia_action < N(vendor_recv_action))
 			f = vendor_recv_action[ia->ia_action];

sys/net80211/ieee80211_ddb.c

@@ -50,6 +50,9 @@ __FBSDID("$FreeBSD$");
 #ifdef IEEE80211_SUPPORT_TDMA
 #include <net80211/ieee80211_tdma.h>
 #endif
+#ifdef IEEE80211_SUPPORT_MESH
+#include <net80211/ieee80211_mesh.h>
+#endif
 
 #include <ddb/ddb.h>
 #include <ddb/db_sym.h>
@@ -75,7 +78,11 @@ static void _db_show_roamparams(const char *tag, const void *arg,
 	const struct ieee80211_roamparam *rp);
 static void _db_show_txparams(const char *tag, const void *arg,
 	const struct ieee80211_txparam *tp);
+static void _db_show_ageq(const char *tag, const struct ieee80211_ageq *q);
 static void _db_show_stats(const struct ieee80211_stats *);
+#ifdef IEEE80211_SUPPORT_MESH
+static void _db_show_mesh(const struct ieee80211_mesh_state *);
+#endif
 
 DB_SHOW_COMMAND(sta, db_show_sta)
 {
@@ -178,6 +185,20 @@ DB_SHOW_ALL_COMMAND(vaps, db_show_all_vaps)
 	}
 }
 
+#ifdef IEEE80211_SUPPORT_MESH
+DB_SHOW_ALL_COMMAND(mesh, db_show_mesh)
+{
+	const struct ieee80211_mesh_state *ms;
+
+	if (!have_addr) {
+		db_printf("usage: show mesh <addr>\n");
+		return;
+	}
+	ms = (const struct ieee80211_mesh_state *) addr;
+	_db_show_mesh(ms);
+}
+#endif /* IEEE80211_SUPPORT_MESH */
+
 static void
 _db_show_txampdu(const char *sep, int ix, const struct ieee80211_tx_ampdu *tap)
 {
@@ -283,7 +304,12 @@ _db_show_sta(const struct ieee80211_node *ni)
 
 	db_printf("\tinact %u inact_reload %u txrate %u\n",
 		ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate);
-	/* XXX wdsq */
+#ifdef IEEE80211_SUPPORT_MESH
+	_db_show_ssid("\tmeshid ", 0, ni->ni_meshidlen, ni->ni_meshid);
+	db_printf(" mlstate %b mllid 0x%x mlpid 0x%x mlrcnt %u mltval %u\n",
+	    ni->ni_mlstate, IEEE80211_MESH_MLSTATE_BITS,
+	    ni->ni_mllid, ni->ni_mlpid, ni->ni_mlrcnt, ni->ni_mltval);
+#endif
 }
 
 #ifdef IEEE80211_SUPPORT_TDMA
@@ -563,10 +589,13 @@ _db_show_com(const struct ieee80211com *ic, int showvaps, int showsta, int showp
 	db_printf("\n");
 
 	db_printf("\tmax_keyix %d", ic->ic_max_keyix);
+	db_printf(" hash_key 0x%x", ic->ic_hash_key);
 	db_printf(" wme %p", &ic->ic_wme);
 	if (!showsta)
 		db_printf(" sta %p", &ic->ic_sta);
 	db_printf("\n");
+	db_printf("\tstageq@%p:\n", &ic->ic_stageq);
+	_db_show_ageq("\t", &ic->ic_stageq);
 	if (showsta)
 		_db_show_node_table("\t", &ic->ic_sta);
 
@@ -643,16 +672,16 @@ _db_show_node_table(const char *tag, const struct ieee80211_node_table *nt)
 	int i;
 
 	db_printf("%s%s@%p:\n", tag, nt->nt_name, nt);
-	db_printf("%s  nodelock %p", tag, &nt->nt_nodelock);
+	db_printf("%s nodelock %p", tag, &nt->nt_nodelock);
 	db_printf(" inact_init %d", nt->nt_inact_init);
 	db_printf(" scanlock %p", &nt->nt_scanlock);
 	db_printf(" scangen %u\n", nt->nt_scangen);
-	db_printf("%s  keyixmax %d keyixmap %p\n",
+	db_printf("%s keyixmax %d keyixmap %p\n",
 	    tag, nt->nt_keyixmax, nt->nt_keyixmap);
 	for (i = 0; i < nt->nt_keyixmax; i++) {
 		const struct ieee80211_node *ni = nt->nt_keyixmap[i];
 		if (ni != NULL)
-			db_printf("%s  [%3u] %p %s\n", tag, i, ni,
+			db_printf("%s [%3u] %p %s\n", tag, i, ni,
 			    ether_sprintf(ni->ni_macaddr));
 	}
 }
@@ -809,8 +838,44 @@ _db_show_txparams(const char *tag, const void *arg,
 	db_printf(" maxretry %d", tp->maxretry);
 }
 
+static void
+_db_show_ageq(const char *tag, const struct ieee80211_ageq *q)
+{
+	const struct mbuf *m;
+
+	db_printf("%s lock %p len %d maxlen %d drops %d head %p tail %p\n",
+	    tag, &q->aq_lock, q->aq_len, q->aq_maxlen, q->aq_drops,
+	    q->aq_head, q->aq_tail);
+	for (m = q->aq_head; m != NULL; m = m->m_nextpkt)
+		db_printf("%s %p (len %d, %b)\n", tag, m, m->m_len,
+		    /* XXX could be either TX or RX but is mostly TX */
+		    m->m_flags, IEEE80211_MBUF_TX_FLAG_BITS);
+}
+
 static void
 _db_show_stats(const struct ieee80211_stats *is)
 {
 }
+
+#ifdef IEEE80211_SUPPORT_MESH
+static void
+_db_show_mesh(const struct ieee80211_mesh_state *ms)
+{
+	struct ieee80211_mesh_route *rt;
+	int i;
+
+	_db_show_ssid(" meshid ", 0, ms->ms_idlen, ms->ms_id);
+	db_printf("nextseq %u ttl %u flags 0x%x\n", ms->ms_seq,
+	    ms->ms_ttl, ms->ms_flags);
+	db_printf("routing table:\n");
+	i = 0;
+	TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) {
+		db_printf("entry %d:\tdest: %6D nexthop: %6D metric: %u", i,
+		    rt->rt_dest, ":", rt->rt_nexthop, ":", rt->rt_metric);
+		db_printf("\tlifetime: %u lastseq: %u priv: %p\n",
+		    rt->rt_lifetime, rt->rt_lastmseq, rt->rt_priv);
+		i++;
+	}
+}
+#endif /* IEEE80211_SUPPORT_MESH */
 #endif /* DDB */

sys/net80211/ieee80211_freebsd.h

@@ -209,6 +209,19 @@ struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen);
 #define	M_AMPDU_MPDU	M_PROTO8		/* A-MPDU re-order done */
 #endif
 #define	M_80211_RX	(M_AMPDU|M_WEP|M_AMPDU_MPDU)
+
+#define	IEEE80211_MBUF_TX_FLAG_BITS \
+	"\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY\5M_ENCAP\6M_WEP\7M_EAPOL" \
+	"\10M_PWR_SAV\11M_MORE_DATA\12M_BCAST\13M_MCAST\14M_FRAG\15M_FIRSTFRAG" \
+	"\16M_LASTFRAG\17M_SKIP_FIREWALL\20M_FREELIST\21M_VLANTAG\22M_PROMISC" \
+	"\23M_NOFREE\24M_FF\25M_TXCB\26M_AMPDU_MPDU\27M_FLOWID"
+
+#define	IEEE80211_MBUF_RX_FLAG_BITS \
+	"\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY\5M_AMPDU\6M_WEP\7M_PROTO3" \
+	"\10M_PROTO4\11M_PROTO5\12M_BCAST\13M_MCAST\14M_FRAG\15M_FIRSTFRAG" \
+	"\16M_LASTFRAG\17M_SKIP_FIREWALL\20M_FREELIST\21M_VLANTAG\22M_PROMISC" \
+	"\23M_NOFREE\24M_PROTO6\25M_PROTO7\26M_AMPDU_MPDU\27M_FLOWID"
+
 /*
  * Store WME access control bits in the vlan tag.
  * This is safe since it's done after the packet is classified

sys/net80211/ieee80211_input.c

@@ -46,6 +46,9 @@ __FBSDID("$FreeBSD$");
 
 #include <net80211/ieee80211_var.h>
 #include <net80211/ieee80211_input.h>
+#ifdef IEEE80211_SUPPORT_MESH
+#include <net80211/ieee80211_mesh.h>
+#endif
 
 #include <net/bpf.h>
 
@@ -230,7 +233,16 @@ ieee80211_deliver_data(struct ieee80211vap *vap,
 struct mbuf *
 ieee80211_decap(struct ieee80211vap *vap, struct mbuf *m, int hdrlen)
 {
-	struct ieee80211_qosframe_addr4 wh;	/* Max size address frames */
+#ifdef IEEE80211_SUPPORT_MESH
+	union {
+		struct ieee80211_qosframe_addr4 wh4;
+		uint8_t b[sizeof(struct ieee80211_qosframe_addr4) +
+			  sizeof(struct ieee80211_meshcntl_ae11)];
+	} whu;
+#define	wh	whu.wh4
+#else
+	struct ieee80211_qosframe_addr4 wh;
+#endif
 	struct ether_header *eh;
 	struct llc *llc;
 
@@ -327,6 +339,7 @@ ieee80211_decap(struct ieee80211vap *vap, struct mbuf *m, int hdrlen)
 		eh->ether_type = htons(m->m_pkthdr.len - sizeof(*eh));
 	}
 	return m;
+#undef	wh
 }
 
 /*
@@ -484,6 +497,8 @@ ieee80211_parse_beacon(struct ieee80211_node *ni, struct mbuf *m,
 	 *	[tlv] HT capabilities
 	 *	[tlv] HT information
 	 *	[tlv] Atheros capabilities
+	 *	[tlv] Mesh ID
+	 *	[tlv] Mesh Configuration
 	 */
 	IEEE80211_VERIFY_LENGTH(efrm - frm, 12,
 	    return (scan->status = IEEE80211_BPARSE_BADIELEN));
@@ -559,6 +574,14 @@ ieee80211_parse_beacon(struct ieee80211_node *ni, struct mbuf *m,
 		case IEEE80211_ELEMID_HTINFO:
 			scan->htinfo = frm;
 			break;
+#ifdef IEEE80211_SUPPORT_TDMA
+		case IEEE80211_ELEMID_MESHID:
+			scan->meshid = frm;
+			break;
+		case IEEE80211_ELEMID_MESHCONF:
+			scan->meshconf = frm;
+			break;
+#endif
 		case IEEE80211_ELEMID_VENDOR:
 			if (iswpaoui(frm))
 				scan->wpa = frm;

sys/net80211/ieee80211_ioctl.c

@@ -241,7 +241,8 @@ scan_space(const struct ieee80211_scan_entry *se, int *ielen)
 	 * packet is <3Kbytes so we are sure this doesn't overflow
 	 * 16-bits; if this is a concern we can drop the ie's.
 	 */
-	len = sizeof(struct ieee80211req_scan_result) + se->se_ssid[1] + *ielen;
+	len = sizeof(struct ieee80211req_scan_result) + se->se_ssid[1] +
+	    se->se_meshid[1] + *ielen;
 	return roundup(len, sizeof(uint32_t));
 }
 
@@ -286,14 +287,19 @@ get_scan_result(void *arg, const struct ieee80211_scan_entry *se)
 	memcpy(sr->isr_rates+nr, se->se_xrates+2, nxr);
 	sr->isr_nrates = nr + nxr;
 
+	/* copy SSID */
 	sr->isr_ssid_len = se->se_ssid[1];
 	cp = ((uint8_t *)sr) + sr->isr_ie_off;
 	memcpy(cp, se->se_ssid+2, sr->isr_ssid_len);
 
-	if (ielen) {
-		cp += sr->isr_ssid_len;
+	/* copy mesh id */
+	cp += sr->isr_ssid_len;
+	sr->isr_meshid_len = se->se_meshid[1];
+	memcpy(cp, se->se_meshid+2, sr->isr_meshid_len);
+	cp += sr->isr_meshid_len;
+
+	if (ielen)
 		memcpy(cp, se->se_ies.data, ielen);
-	}
 
 	req->space -= len;
 	req->sr = (struct ieee80211req_scan_result *)(((uint8_t *)sr) + len);
@@ -435,6 +441,9 @@ get_sta_info(void *arg, struct ieee80211_node *ni)
 	else
 		si->isi_inact = vap->iv_inact_init;
 	si->isi_inact = (si->isi_inact - ni->ni_inact) * IEEE80211_INACT_WAIT;
+	si->isi_localid = ni->ni_mllid;
+	si->isi_peerid = ni->ni_mlpid;
+	si->isi_peerstate = ni->ni_mlstate;
 
 	if (ielen) {
 		cp = ((uint8_t *)si) + si->isi_ie_off;
@@ -2847,6 +2856,7 @@ ieee80211_ioctl_set80211(struct ieee80211vap *vap, u_long cmd, struct ieee80211r
 		break;
 	case IEEE80211_IOC_DTIM_PERIOD:
 		if (vap->iv_opmode != IEEE80211_M_HOSTAP &&
+		    vap->iv_opmode != IEEE80211_M_MBSS &&
 		    vap->iv_opmode != IEEE80211_M_IBSS)
 			return EINVAL;
 		if (IEEE80211_DTIM_MIN <= ireq->i_val &&
@@ -2858,6 +2868,7 @@ ieee80211_ioctl_set80211(struct ieee80211vap *vap, u_long cmd, struct ieee80211r
 		break;
 	case IEEE80211_IOC_BEACON_INTERVAL:
 		if (vap->iv_opmode != IEEE80211_M_HOSTAP &&
+		    vap->iv_opmode != IEEE80211_M_MBSS &&
 		    vap->iv_opmode != IEEE80211_M_IBSS)
 			return EINVAL;
 		if (IEEE80211_BINTVAL_MIN <= ireq->i_val &&

sys/net80211/ieee80211_ioctl.h

@@ -223,6 +223,19 @@ struct ieee80211_stats {
 	uint32_t	is_tx_ctl;		/* tx ctrl frames */
 	uint32_t	is_ampdu_rexmt;		/* A-MPDU frames rexmt ok */
 	uint32_t	is_ampdu_rexmt_fail;	/* A-MPDU frames rexmt fail */
+
+	uint32_t	is_mesh_wrongmesh;	/* dropped 'cuz not mesh sta*/
+	uint32_t	is_mesh_nolink;		/* dropped 'cuz link not estab*/
+	uint32_t	is_mesh_fwd_ttl;	/* mesh not fwd'd 'cuz ttl 0 */
+	uint32_t	is_mesh_fwd_nobuf;	/* mesh not fwd'd 'cuz no mbuf*/
+	uint32_t	is_mesh_fwd_tooshort;	/* mesh not fwd'd 'cuz no hdr */
+	uint32_t	is_mesh_fwd_disabled;	/* mesh not fwd'd 'cuz disabled */
+	uint32_t	is_mesh_fwd_nopath;	/* mesh not fwd'd 'cuz path unknown */
+
+	uint32_t	is_hwmp_wrongseq;	/* wrong hwmp seq no. */
+	uint32_t	is_hwmp_rootreqs;	/* root PREQs sent */
+	uint32_t	is_hwmp_rootrann;	/* root RANNs sent */
+
 	uint32_t	is_spare[16];
 };
 
@@ -304,6 +317,27 @@ struct ieee80211req_maclist {
 	uint8_t		ml_macaddr[IEEE80211_ADDR_LEN];
 } __packed;
 
+/*
+ * Mesh Routing Table Operations.
+ */
+enum {
+	IEEE80211_MESH_RTCMD_LIST   = 0, /* list HWMP routing table */
+	IEEE80211_MESH_RTCMD_FLUSH  = 1, /* flush HWMP routing table */
+	IEEE80211_MESH_RTCMD_ADD    = 2, /* add entry to the table */
+	IEEE80211_MESH_RTCMD_DELETE = 3, /* delete an entry from the table */
+};
+
+/*
+ * HWMP root modes
+ */
+enum {
+	IEEE80211_HWMP_ROOTMODE_DISABLED	= 0, 	/* disabled */
+	IEEE80211_HWMP_ROOTMODE_NORMAL		= 1,	/* normal PREPs */
+	IEEE80211_HWMP_ROOTMODE_PROACTIVE	= 2,	/* proactive PREPS */
+	IEEE80211_HWMP_ROOTMODE_RANN		= 3,	/* use RANN elemid */
+};
+
+
 /*
  * Set the active channel list by IEEE channel #: each channel
  * to be marked active is set in a bit vector.  Note this list is
@@ -384,6 +418,10 @@ struct ieee80211req_sta_info {
 	uint16_t	isi_pad;
 	uint32_t	isi_jointime;		/* time of assoc/join */
 	struct ieee80211_mimo_info isi_mimo;	/* MIMO info for 11n sta's */
+	/* 11s info */
+	uint16_t	isi_peerid;
+	uint16_t	isi_localid;
+	uint8_t		isi_peerstate;
 	/* XXX frag state? */
 	/* variable length IE data */
 };
@@ -637,6 +675,22 @@ struct ieee80211req {
 #define	IEEE80211_IOC_GREENFIELD	112	/* Greenfield (on, off) */
 #define	IEEE80211_IOC_STBC		113	/* STBC Tx/RX (on, off) */
 
+#define	IEEE80211_IOC_MESH_ID		170	/* mesh identifier */
+#define	IEEE80211_IOC_MESH_AP		171	/* accepting peerings */
+#define	IEEE80211_IOC_MESH_FWRD		172	/* forward frames */
+#define	IEEE80211_IOC_MESH_PROTO	173	/* mesh protocols */
+#define	IEEE80211_IOC_MESH_TTL		174	/* mesh TTL */
+#define	IEEE80211_IOC_MESH_RTCMD	175	/* mesh routing table commands*/
+#define	IEEE80211_IOC_MESH_PR_METRIC	176	/* mesh metric protocol */
+#define	IEEE80211_IOC_MESH_PR_PATH	177	/* mesh path protocol */
+#define	IEEE80211_IOC_MESH_PR_SIG	178	/* mesh sig protocol */
+#define	IEEE80211_IOC_MESH_PR_CC	179	/* mesh congestion protocol */
+#define	IEEE80211_IOC_MESH_PR_AUTH	180	/* mesh auth protocol */
+
+#define	IEEE80211_IOC_HWMP_ROOTMODE	190	/* HWMP root mode */
+#define	IEEE80211_IOC_HWMP_MAXHOPS	191	/* number of hops before drop */
+#define	IEEE80211_IOC_HWMP_TTL		192	/* HWMP TTL */
+
 #define	IEEE80211_IOC_TDMA_SLOT		201	/* TDMA: assigned slot */
 #define	IEEE80211_IOC_TDMA_SLOTCNT	202	/* TDMA: slots in bss */
 #define	IEEE80211_IOC_TDMA_SLOTLEN	203	/* TDMA: slot length (usecs) */
@@ -724,7 +778,9 @@ struct ieee80211req_scan_result {
 	uint8_t		isr_nrates;
 	uint8_t		isr_rates[IEEE80211_RATE_MAXSIZE];
 	uint8_t		isr_ssid_len;		/* SSID length */
-	/* variable length SSID followed by IE data */
+	uint8_t		isr_meshid_len;		/* MESH ID length */
+	/* variable length SSID, followed by variable length MESH ID,
+	  followed by IE data */
 };
 
 /*

sys/net80211/ieee80211_mesh.h

@@ -0,0 +1,505 @@
+/*- 
+ * Copyright (c) 2009 The FreeBSD Foundation 
+ * All rights reserved. 
+ * 
+ * This software was developed by Rui Paulo under sponsorship from the
+ * FreeBSD Foundation. 
+ *  
+ * Redistribution and use in source and binary forms, with or without 
+ * modification, are permitted provided that the following conditions 
+ * are met: 
+ * 1. Redistributions of source code must retain the above copyright 
+ *    notice, this list of conditions and the following disclaimer. 
+ * 2. Redistributions in binary form must reproduce the above copyright 
+ *    notice, this list of conditions and the following disclaimer in the 
+ *    documentation and/or other materials provided with the distribution. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
+ * SUCH DAMAGE. 
+ * 
+ * $FreeBSD$
+ */
+#ifndef _NET80211_IEEE80211_MESH_H_
+#define _NET80211_IEEE80211_MESH_H_
+
+#define	IEEE80211_MESH_DEFAULT_TTL	31
+
+/*
+ * NB: all structures are__packed  so sizeof works on arm, et. al.
+ */
+/*
+ * 802.11s Information Elements.
+*/
+/* Mesh Configuration */
+struct ieee80211_meshconf_ie {
+	uint8_t		conf_ie;	/* IEEE80211_ELEMID_MESHCONF */
+	uint8_t		conf_len;
+	uint8_t		conf_ver;
+	uint8_t		conf_pselid[4];	/* Active Path Sel. Proto. ID */
+	uint8_t		conf_pmetid[4];	/* APS Metric Identifier */
+	uint8_t		conf_ccid[4];	/* Congestion Control Mode ID  */
+	uint8_t		conf_syncid[4];	/* Sync. Protocol ID */
+	uint8_t		conf_authid[4];	/* Auth. Protocol ID */
+	uint8_t		conf_form;	/* Formation Information */
+	uint8_t		conf_cap;
+} __packed;
+
+#define	IEEE80211_MESHCONF_VERSION		1
+/* Null Protocol */
+#define	IEEE80211_MESHCONF_NULL_OUI		0x00, 0x0f, 0xac
+#define	IEEE80211_MESHCONF_NULL_VALUE		0xff
+#define	IEEE80211_MESHCONF_NULL		{ IEEE80211_MESHCONF_NULL_OUI, \
+					  IEEE80211_MESHCONF_NULL_VALUE }
+/* Hybrid Wireless Mesh Protocol */
+#define	IEEE80211_MESHCONF_HWMP_OUI		0x00, 0x0f, 0xac
+#define	IEEE80211_MESHCONF_HWMP_VALUE		0x00
+#define	IEEE80211_MESHCONF_HWMP		{ IEEE80211_MESHCONF_HWMP_OUI, \
+					  IEEE80211_MESHCONF_HWMP_VALUE }
+/* Airtime Link Metric */
+#define	IEEE80211_MESHCONF_AIRTIME_OUI		0x00, 0x0f, 0xac
+#define	IEEE80211_MESHCONF_AIRTIME_VALUE	0x00
+#define	IEEE80211_MESHCONF_AIRTIME	{ IEEE80211_MESHCONF_AIRTIME_OUI, \
+					  IEEE80211_MESHCONF_AIRTIME_VALUE }
+/* Congestion Control Signaling */
+#define	IEEE80211_MESHCONF_CCSIG_OUI		0x00, 0x0f, 0xac
+#define	IEEE80211_MESHCONF_CCSIG_VALUE		0x00
+#define	IEEE80211_MESHCONF_CCSIG	{ IEEE80211_MESHCONF_CCSIG_OUI,\
+					  IEEE80211_MESHCONF_CCSIG_VALUE }
+/* Neighbour Offset */
+#define	IEEE80211_MESHCONF_NEIGHOFF_OUI		0x00, 0x0f, 0xac
+#define	IEEE80211_MESHCONF_NEIGHOFF_VALUE	0x00
+#define	IEEE80211_MESHCONF_NEIGHOFF	{ IEEE80211_MESHCONF_NEIGHOFF_OUI, \
+					  IEEE80211_MESHCONF_NEIGHOFF_VALUE }
+/* Simultaneous Authenticaction of Equals */
+#define	IEEE80211_MESHCONF_SAE_OUI		0x00, 0x0f, 0xac
+#define	IEEE80211_MESHCONF_SAE_VALUE		0x01
+#define	IEEE80211_MESHCONF_SAE		{ IEEE80211_MESHCONF_SAE_OUI, \
+					  IEEE80211_MESHCONF_SAE_VALUE }
+#define	IEEE80211_MESHCONF_FORM_MP		0x01 /* Connected to Portal */
+#define	IEEE80211_MESHCONF_FORM_NNEIGH_MASK	0x04 /* Number of Neighbours */
+#define	IEEE80211_MESHCONF_CAP_AP	0x01	/* Accepting Peers */
+#define	IEEE80211_MESHCONF_CAP_MCCAS	0x02	/* MCCA supported */
+#define	IEEE80211_MESHCONF_CAP_MCCAE	0x04	/* MCCA enabled */
+#define	IEEE80211_MESHCONF_CAP_FWRD 	0x08	/* forwarding enabled */
+#define	IEEE80211_MESHCONF_CAP_BTR	0x10	/* Beacon Timing Report Enab */
+#define	IEEE80211_MESHCONF_CAP_TBTTA	0x20	/* TBTT Adj. Enabled */
+#define	IEEE80211_MESHCONF_CAP_PSL	0x40	/* Power Save Level */
+
+/* Mesh Identifier */
+struct ieee80211_meshid_ie {
+	uint8_t		id_ie;		/* IEEE80211_ELEMID_MESHID */
+	uint8_t		id_len;
+} __packed;
+
+/* Link Metric Report */
+struct ieee80211_meshlmetric_ie {
+	uint8_t		lm_ie;	/* IEEE80211_ELEMID_MESHLINK */
+	uint8_t		lm_len;
+	uint32_t	lm_metric;
+#define	IEEE80211_MESHLMETRIC_INITIALVAL	0
+} __packed;
+
+/* Congestion Notification */
+struct ieee80211_meshcngst_ie {
+	uint8_t		cngst_ie;	/* IEEE80211_ELEMID_MESHCNGST */
+	uint8_t		cngst_len;
+	uint16_t	cngst_timer[4];	/* Expiration Timers: AC_BK,
+					   AC_BE, AC_VI, AC_VO */
+} __packed;
+
+/* Peer Version */
+struct ieee80211_meshpeerver_ie {
+	uint8_t		peerver_ie;	/* IEEE80211_ELEMID_MESHPEERVER */
+	uint8_t		peerver_len;
+	uint8_t		peerver_proto[4];
+} __packed;
+/* Mesh Peering Management Protocol */
+#define	IEEE80211_MESHPEERVER_PEER_OUI		0x00, 0x0f, 0xac
+#define	IEEE80211_MESHPEERVER_PEER_VALUE	0x2a
+#define	IEEE80211_MESHPEERVER_PEER	{ IEEE80211_MESHPEERVER_PEER_OUI, \
+					  IEEE80211_MESHPEERVER_PEER_VALUE }
+/* Abbreviated Handshake Protocol */
+#define	IEEE80211_MESHPEERVER_AH_OUI		0x00, 0x0f, 0xac
+#define	IEEE80211_MESHPEERVER_AH_VALUE		0x2b
+#define	IEEE80211_MESHPEERVER_AH	{ IEEE80211_MESHPEERVER_AH_OUI, \
+					  IEEE80211_MESHPEERVER_AH_VALUE }
+
+/* Peer Link Management */
+struct ieee80211_meshpeer_ie {
+	uint8_t		peer_ie;	/* IEEE80211_ELEMID_MESHPEER */
+	uint8_t		peer_len;
+	uint8_t		peer_subtype;
+	uint16_t	peer_llinkid;	/* Local Link ID */
+	uint16_t	peer_linkid;	/* Peer Link ID */
+	uint16_t	peer_rcode;
+} __packed;
+
+enum {
+	IEEE80211_MESH_PEER_LINK_OPEN		= 0,
+	IEEE80211_MESH_PEER_LINK_CONFIRM	= 1,
+	IEEE80211_MESH_PEER_LINK_CLOSE		= 2,
+	/* values 3-255 are reserved */
+};
+
+#ifdef notyet
+/* Mesh Channel Switch Annoucement */
+struct ieee80211_meshcsa_ie {
+	uint8_t		csa_ie;		/* IEEE80211_ELEMID_MESHCSA */
+	uint8_t		csa_len;
+	uint8_t		csa_mode;
+	uint8_t		csa_newclass;	/* New Regulatory Class */
+	uint8_t		csa_newchan;
+	uint8_t		csa_precvalue;	/* Precedence Value */
+	uint8_t		csa_count;
+} __packed;
+
+/* Mesh TIM */
+/* Equal to the non Mesh version */
+
+/* Mesh Awake Window */
+struct ieee80211_meshawakew_ie {
+	uint8_t		awakew_ie;		/* IEEE80211_ELEMID_MESHAWAKEW */
+	uint8_t		awakew_len;
+	uint8_t		awakew_windowlen;	/* in TUs */
+} __packed;
+
+/* Mesh Beacon Timing */
+struct ieee80211_meshbeacont_ie {
+	uint8_t		beacont_ie;		/* IEEE80211_ELEMID_MESHBEACONT */
+	uint8_t		beacont_len;
+	struct {
+		uint8_t		mp_aid;		/* Least Octet of AID */
+		uint16_t	mp_btime;	/* Beacon Time */
+		uint16_t	mp_bint;	/* Beacon Interval */
+	} __packed mp[1];			/* NB: variable size */
+} __packed;
+#endif
+
+/* Portal (MP) Annoucement */
+struct ieee80211_meshpann_ie {
+	uint8_t		pann_ie;		/* IEEE80211_ELEMID_MESHPANN */
+	uint8_t		pann_len;
+	uint8_t		pann_flags;
+	uint8_t		pann_hopcount;
+	uint8_t		pann_ttl;
+	uint8_t		pann_addr[IEEE80211_ADDR_LEN];
+	uint8_t		pann_seq;		/* PANN Sequence Number */
+} __packed;
+
+/* Root (MP) Annoucement */
+struct ieee80211_meshrann_ie {
+	uint8_t		rann_ie;		/* IEEE80211_ELEMID_MESHRANN */
+	uint8_t		rann_len;
+	uint8_t		rann_flags;
+#define	IEEE80211_MESHRANN_FLAGS_PR	0x01	/* Portal Role */
+	uint8_t		rann_hopcount;
+	uint8_t		rann_ttl;
+	uint8_t		rann_addr[IEEE80211_ADDR_LEN];
+	uint32_t	rann_seq;		/* HWMP Sequence Number */
+	uint32_t	rann_metric;
+} __packed;
+
+/* Mesh Path Request */
+struct ieee80211_meshpreq_ie {
+	uint8_t		preq_ie;	/* IEEE80211_ELEMID_MESHPREQ */
+	uint8_t		preq_len;
+	uint8_t		preq_flags;
+#define	IEEE80211_MESHPREQ_FLAGS_PR	0x01	/* Portal Role */
+#define	IEEE80211_MESHPREQ_FLAGS_AM	0x02	/* 0 = ucast / 1 = bcast */
+#define	IEEE80211_MESHPREQ_FLAGS_PP	0x04	/* Proactive PREP */
+#define	IEEE80211_MESHPREQ_FLAGS_AE	0x40	/* Address Extension */
+	uint8_t		preq_hopcount;
+	uint8_t		preq_ttl;
+	uint32_t	preq_id;
+	uint8_t		preq_origaddr[IEEE80211_ADDR_LEN];
+	uint32_t	preq_origseq;	/* HWMP Sequence Number */
+	/* NB: may have Originator Proxied Address */
+	uint32_t	preq_lifetime;
+	uint32_t	preq_metric;
+	uint8_t		preq_tcount;	/* target count */
+	struct {
+		uint8_t		target_flags;
+#define	IEEE80211_MESHPREQ_TFLAGS_TO	0x01	/* Target Only */
+#define	IEEE80211_MESHPREQ_TFLAGS_RF	0x02	/* Reply and Forward */
+#define	IEEE80211_MESHPREQ_TFLAGS_USN	0x04	/* Unknown HWMP seq number */
+		uint8_t		target_addr[IEEE80211_ADDR_LEN];
+		uint32_t	target_seq;	/* HWMP Sequence Number */
+	} __packed preq_targets[1];		/* NB: variable size */
+} __packed;
+
+/* Mesh Path Reply */
+struct ieee80211_meshprep_ie {
+	uint8_t		prep_ie;	/* IEEE80211_ELEMID_MESHPREP */
+	uint8_t		prep_len;
+	uint8_t		prep_flags;
+	uint8_t		prep_hopcount;
+	uint8_t		prep_ttl;
+	uint8_t		prep_targetaddr[IEEE80211_ADDR_LEN];
+	uint32_t	prep_targetseq;
+	/* NB: May have Target Proxied Address */
+	uint32_t	prep_lifetime;
+	uint32_t	prep_metric;
+	uint8_t		prep_origaddr[IEEE80211_ADDR_LEN];
+	uint32_t	prep_origseq;	/* HWMP Sequence Number */
+} __packed;
+
+/* Mesh Path Error */
+struct ieee80211_meshperr_ie {
+	uint8_t		perr_ie;	/* IEEE80211_ELEMID_MESHPERR */
+	uint8_t		perr_len;
+	uint8_t		perr_mode;	/* NB: reserved */
+	uint8_t		perr_ndests;	/* Number of Destinations */
+	struct {
+		uint8_t		dest_addr[IEEE80211_ADDR_LEN];
+		uint32_t	dest_seq;	/* HWMP Sequence Number */
+	} __packed perr_dests[1];		/* NB: variable size */
+} __packed;
+
+#ifdef notyet
+/* Mesh Proxy Update */
+struct ieee80211_meshpu_ie {
+	uint8_t		pu_ie;		/* IEEE80211_ELEMID_MESHPU */
+	uint8_t		pu_len;
+	uint8_t		pu_flags;
+#define	IEEE80211_MESHPU_FLAGS_MASK		0x1
+#define	IEEE80211_MESHPU_FLAGS_DEL		0x0
+#define	IEEE80211_MESHPU_FLAGS_ADD		0x1
+	uint8_t		pu_seq;		/* PU Sequence Number */
+	uint8_t		pu_addr[IEEE80211_ADDR_LEN];
+	uint8_t		pu_naddr;	/* Number of Proxied Addresses */
+	/* NB: proxied address follows */
+} __packed;
+
+/* Mesh Proxy Update Confirmation */
+struct ieee80211_meshpuc_ie {
+	uint8_t		puc_ie;		/* IEEE80211_ELEMID_MESHPUC */
+	uint8_t		puc_len;
+	uint8_t		puc_flags;
+	uint8_t		puc_seq;	/* PU Sequence Number */
+	uint8_t		puc_daddr[IEEE80211_ADDR_LEN];
+} __packed;
+#endif
+
+/*
+ * 802.11s Action Frames
+ */
+#define	IEEE80211_ACTION_CAT_MESHPEERING	30	/* XXX Linux */
+#define	IEEE80211_ACTION_CAT_MESHLMETRIC	13
+#define	IEEE80211_ACTION_CAT_MESHPATH		32	/* XXX Linux */
+#define	IEEE80211_ACTION_CAT_INTERWORK		15
+#define	IEEE80211_ACTION_CAT_RESOURCE		16
+#define	IEEE80211_ACTION_CAT_PROXY		17
+
+/*
+ * Mesh Peering Action codes.
+ */
+enum {
+	IEEE80211_ACTION_MESHPEERING_OPEN	= 0,
+	IEEE80211_ACTION_MESHPEERING_CONFIRM	= 1,
+	IEEE80211_ACTION_MESHPEERING_CLOSE	= 2,
+	/* 3-255 reserved */
+};
+
+/*
+ * Mesh Path Selection Action codes.
+ */
+enum {
+	IEEE80211_ACTION_MESHPATH_REQ	= 0,
+	IEEE80211_ACTION_MESHPATH_REP	= 1,
+	IEEE80211_ACTION_MESHPATH_ERR	= 2,
+	IEEE80211_ACTION_MESHPATH_RANN	= 3,
+	/* 4-255 reserved */
+};
+
+/*
+ * Mesh Link Metric Action codes.
+ */
+enum {
+	IEEE80211_ACTION_MESHLMETRIC_REQ = 0,	/* Link Metric Request */
+	IEEE80211_ACTION_MESHLMETRIC_REP = 1,	/* Link Metric Report */
+	/* 2-255 reserved */
+};
+
+/*
+ * Mesh Portal Annoucement Action codes.
+ */
+enum {
+	IEEE80211_ACTION_MESHPANN	= 0,
+	/* 1-255 reserved */
+};
+
+/*
+ * Different mesh control structures based on the AE
+ * (Address Extension) bits.
+ */
+struct ieee80211_meshcntl {
+	uint8_t		mc_flags;	/* Address Extension 00 */
+	uint8_t		mc_ttl;		/* TTL */
+	uint8_t		mc_seq[4];	/* Sequence No. */
+	/* NB: more addresses may follow */
+} __packed;
+
+struct ieee80211_meshcntl_ae01 {
+	uint8_t		mc_flags;	/* Address Extension 01 */
+	uint8_t		mc_ttl;		/* TTL */
+	uint8_t		mc_seq[4];	/* Sequence No. */
+	uint8_t		mc_addr4[IEEE80211_ADDR_LEN];
+} __packed;
+
+struct ieee80211_meshcntl_ae10 {
+	uint8_t		mc_flags;	/* Address Extension 10 */
+	uint8_t		mc_ttl;		/* TTL */
+	uint8_t		mc_seq[4];	/* Sequence No. */
+	uint8_t		mc_addr5[IEEE80211_ADDR_LEN];
+	uint8_t		mc_addr6[IEEE80211_ADDR_LEN];
+} __packed;
+
+struct ieee80211_meshcntl_ae11 {
+	uint8_t		mc_flags;	/* Address Extension 11 */
+	uint8_t		mc_ttl;		/* TTL */
+	uint8_t		mc_seq[4];	/* Sequence No. */
+	uint8_t		mc_addr4[IEEE80211_ADDR_LEN];
+	uint8_t		mc_addr5[IEEE80211_ADDR_LEN];
+	uint8_t		mc_addr6[IEEE80211_ADDR_LEN];
+} __packed;
+
+struct ieee80211req_mesh_route {
+	uint8_t			imr_dest[IEEE80211_ADDR_LEN];
+	uint8_t			imr_nexthop[IEEE80211_ADDR_LEN];
+	uint32_t		imr_metric;
+	uint16_t		imr_nhops;
+	uint32_t		imr_lifetime;
+};
+
+#ifdef _KERNEL
+MALLOC_DECLARE(M_80211_MESH_RT);
+struct ieee80211_mesh_route {
+	TAILQ_ENTRY(ieee80211_mesh_route)	rt_next;
+	uint8_t			rt_dest[IEEE80211_ADDR_LEN];
+	uint8_t			rt_nexthop[IEEE80211_ADDR_LEN];
+	uint32_t		rt_metric;	/* path metric */
+	uint16_t		rt_nhops;	/* number of hops */
+	uint32_t		rt_lifetime;
+	uint32_t		rt_lastmseq;	/* last seq# seen dest */
+	void			*rt_priv;	/* private data */
+};
+#define	IEEE80211_MESH_ROUTE_PRIV(rt, cast)	((cast *)rt->rt_priv)
+
+#define	IEEE80211_MESH_PROTO_DSZ	12	/* description size */
+/*
+ * Mesh Path Selection Protocol.
+ */
+enum ieee80211_state;
+struct ieee80211_mesh_proto_path {
+	char 		mpp_descr[IEEE80211_MESH_PROTO_DSZ];
+	uint8_t		mpp_ie[4];
+	struct ieee80211_node *
+	    		(*mpp_discover)(struct ieee80211vap *,
+				const uint8_t [IEEE80211_ADDR_LEN],
+				struct mbuf *);
+	void		(*mpp_peerdown)(struct ieee80211_node *);
+	void		(*mpp_vattach)(struct ieee80211vap *);
+	void		(*mpp_vdetach)(struct ieee80211vap *);
+	int		(*mpp_newstate)(struct ieee80211vap *,
+			    enum ieee80211_state, int);
+	size_t		mpp_privlen;	/* size required in the routing table
+					   for private data */
+};
+
+/*
+ * Mesh Link Metric Report Protocol.
+ */
+struct ieee80211_mesh_proto_metric {
+	char		mpm_descr[IEEE80211_MESH_PROTO_DSZ];
+	uint8_t		mpm_ie[4];
+	uint32_t	(*mpm_metric)(struct ieee80211_node *);
+};
+
+#ifdef notyet
+/*
+ * Mesh Authentication Protocol.
+ */
+struct ieee80211_mesh_proto_auth {
+	uint8_t		mpa_ie[4];
+};
+
+struct ieee80211_mesh_proto_congestion {
+};
+
+struct ieee80211_mesh_proto_sync {
+};
+#endif
+
+typedef uint32_t ieee80211_mesh_seq;
+#define	IEEE80211_MESH_SEQ_LEQ(a, b)	((int32_t)((a)-(b)) <= 0)
+#define	IEEE80211_MESH_SEQ_GEQ(a, b)	((int32_t)((a)-(b)) >= 0)
+
+struct ieee80211_mesh_state {
+	int				ms_idlen;
+	uint8_t				ms_id[IEEE80211_MESHID_LEN];
+	ieee80211_mesh_seq		ms_seq;	/* seq no for meshcntl */
+	uint16_t			ms_neighbors;
+	uint8_t				ms_ttl;	/* mesh ttl set in packets */
+#define IEEE80211_MESHFLAGS_AP		0x01	/* accept peers */
+#define IEEE80211_MESHFLAGS_PORTAL	0x02	/* mesh portal role */
+#define IEEE80211_MESHFLAGS_FWD		0x04	/* forward packets */
+	uint8_t				ms_flags;
+	struct mtx			ms_rt_lock;
+	TAILQ_HEAD(, ieee80211_mesh_route)  ms_routes;
+	struct ieee80211_mesh_proto_metric *ms_pmetric;
+	struct ieee80211_mesh_proto_path   *ms_ppath;
+};
+void		ieee80211_mesh_attach(struct ieee80211com *);
+void		ieee80211_mesh_detach(struct ieee80211com *);
+
+struct ieee80211_mesh_route *
+		ieee80211_mesh_rt_find(struct ieee80211vap *,
+		    const uint8_t [IEEE80211_ADDR_LEN]);
+struct ieee80211_mesh_route *
+                ieee80211_mesh_rt_add(struct ieee80211vap *,
+		    const uint8_t [IEEE80211_ADDR_LEN]);
+void		ieee80211_mesh_rt_del(struct ieee80211vap *,
+		    const uint8_t [IEEE80211_ADDR_LEN]);
+void		ieee80211_mesh_rt_flush(struct ieee80211vap *);
+
+int		ieee80211_mesh_register_proto_path(const
+		    struct ieee80211_mesh_proto_path *);
+int		ieee80211_mesh_register_proto_metric(const
+		    struct ieee80211_mesh_proto_metric *);
+
+uint8_t *	ieee80211_add_meshpeerver(uint8_t *, struct ieee80211vap *);
+uint8_t *	ieee80211_add_meshid(uint8_t *, struct ieee80211vap *);
+uint8_t *	ieee80211_add_meshconf(uint8_t *, struct ieee80211vap *);
+uint8_t *	ieee80211_add_meshpeer(uint8_t *, uint8_t, uint16_t, uint16_t,
+		    uint16_t);
+uint8_t *	ieee80211_add_meshlmetric(uint8_t *, uint32_t);
+
+void		ieee80211_mesh_node_init(struct ieee80211vap *,
+		    struct ieee80211_node *);
+void		ieee80211_mesh_node_cleanup(struct ieee80211_node *);
+void		ieee80211_parse_meshid(struct ieee80211_node *,
+		    const uint8_t *);
+struct ieee80211_scanparams;
+void		ieee80211_mesh_init_neighbor(struct ieee80211_node *,
+		   const struct ieee80211_frame *,
+		   const struct ieee80211_scanparams *);
+
+static __inline struct ieee80211_node *
+ieee80211_mesh_discover(struct ieee80211vap *vap,                                                     
+    const uint8_t dest[IEEE80211_ADDR_LEN], struct mbuf *m)
+{
+	struct ieee80211_mesh_state *ms = vap->iv_mesh;
+	return ms->ms_ppath->mpp_discover(vap, dest, m);
+}
+
+#endif /* _KERNEL */
+#endif /* !_NET80211_IEEE80211_MESH_H_ */

sys/net80211/ieee80211_node.c

@@ -50,9 +50,15 @@ __FBSDID("$FreeBSD$");
 #include <net80211/ieee80211_tdma.h>
 #endif
 #include <net80211/ieee80211_wds.h>
+#include <net80211/ieee80211_mesh.h>
 
 #include <net/bpf.h>
 
+/*
+ * IEEE80211_NODE_HASHSIZE must be a power of 2.
+ */
+CTASSERT((IEEE80211_NODE_HASHSIZE & (IEEE80211_NODE_HASHSIZE-1)) == 0);
+
 /*
  * Association id's are managed with a bit vector.
  */
@@ -322,7 +328,8 @@ ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan)
 	struct ieee80211_node *ni;
 
 	IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
-		"%s: creating ibss on channel %u\n", __func__,
+		"%s: creating %s on channel %u\n", __func__,
+		ieee80211_opmode_name[vap->iv_opmode],
 		ieee80211_chan2ieee(ic, chan));
 
 	ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr);
@@ -360,6 +367,11 @@ ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan)
 		if ((vap->iv_caps & IEEE80211_C_TDMA) == 0)
 #endif
 			memset(ni->ni_bssid, 0, IEEE80211_ADDR_LEN);
+#ifdef IEEE80211_SUPPORT_MESH
+	} else if (vap->iv_opmode == IEEE80211_M_MBSS) {
+		ni->ni_meshidlen = vap->iv_mesh->ms_idlen;
+		memcpy(ni->ni_meshid, vap->iv_mesh->ms_id, ni->ni_meshidlen);
+#endif
 	}
 	/* 
 	 * Fix the channel and related attributes.
@@ -609,6 +621,7 @@ gethtadjustflags(struct ieee80211com *ic)
 		case IEEE80211_M_AHDEMO:
 		case IEEE80211_M_HOSTAP:
 		case IEEE80211_M_IBSS:
+		case IEEE80211_M_MBSS:
 			flags |= ieee80211_htchanflags(vap->iv_bss->ni_chan);
 			break;
 		default:
@@ -784,6 +797,10 @@ ieee80211_sta_join(struct ieee80211vap *vap, struct ieee80211_channel *chan,
 			ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie);
 		if (ni->ni_ies.htinfo_ie != NULL)
 			ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie);
+#ifdef IEEE80211_SUPPORT_MESH
+		if (ni->ni_ies.meshid_ie != NULL)
+			ieee80211_parse_meshid(ni, ni->ni_ies.meshid_ie);
+#endif
 #ifdef IEEE80211_SUPPORT_TDMA
 		if (ni->ni_ies.tdma_ie != NULL)
 			ieee80211_parse_tdma(ni, ni->ni_ies.tdma_ie);
@@ -914,6 +931,11 @@ ieee80211_ies_expand(struct ieee80211_ies *ies)
 		case IEEE80211_ELEMID_HTCAP:
 			ies->htcap_ie = ie;
 			break;
+#ifdef IEEE80211_SUPPORT_MESH
+		case IEEE80211_ELEMID_MESHID:
+			ies->meshid_ie = ie;
+			break;
+#endif
 		}
 		ielen -= 2 + ie[1];
 		ie += 2 + ie[1];
@@ -950,6 +972,13 @@ node_cleanup(struct ieee80211_node *ni)
 #ifdef IEEE80211_SUPPORT_SUPERG
 	else if (ni->ni_ath_flags & IEEE80211_NODE_ATH)
 		ieee80211_ff_node_cleanup(ni);
+#endif
+#ifdef IEEE80211_SUPPORT_MESH
+	/*
+	 * Cleanup any mesh-related state.
+	 */
+	if (vap->iv_opmode == IEEE80211_M_MBSS)
+		ieee80211_mesh_node_cleanup(ni);
 #endif
 	/*
 	 * Clear any staging queue entries.
@@ -1078,7 +1107,7 @@ ieee80211_alloc_node(struct ieee80211_node_table *nt,
 		ether_sprintf(macaddr), nt->nt_name);
 
 	IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
-	hash = IEEE80211_NODE_HASH(macaddr);
+	hash = IEEE80211_NODE_HASH(ic, macaddr);
 	ieee80211_node_initref(ni);		/* mark referenced */
 	ni->ni_chan = IEEE80211_CHAN_ANYC;
 	ni->ni_authmode = IEEE80211_AUTH_OPEN;
@@ -1090,7 +1119,10 @@ ieee80211_alloc_node(struct ieee80211_node_table *nt,
 	ni->ni_inact = ni->ni_inact_reload;
 	ni->ni_ath_defkeyix = 0x7fff;
 	ieee80211_psq_init(&ni->ni_psq, "unknown");
-
+#ifdef IEEE80211_SUPPORT_MESH
+	if (vap->iv_opmode == IEEE80211_M_MBSS)
+		ieee80211_mesh_node_init(vap, ni);
+#endif
 	IEEE80211_NODE_LOCK(nt);
 	TAILQ_INSERT_TAIL(&nt->nt_node, ni, ni_list);
 	LIST_INSERT_HEAD(&nt->nt_hash[hash], ni, ni_hash);
@@ -1242,7 +1274,7 @@ ieee80211_find_node_locked(struct ieee80211_node_table *nt,
 
 	IEEE80211_NODE_LOCK_ASSERT(nt);
 
-	hash = IEEE80211_NODE_HASH(macaddr);
+	hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr);
 	LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) {
 		if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
 			ieee80211_ref_node(ni);	/* mark referenced */
@@ -1292,7 +1324,7 @@ ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt,
 
 	IEEE80211_NODE_LOCK_ASSERT(nt);
 
-	hash = IEEE80211_NODE_HASH(macaddr);
+	hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr);
 	LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) {
 		if (ni->ni_vap == vap &&
 		    IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
@@ -1391,7 +1423,10 @@ ieee80211_init_neighbor(struct ieee80211_node *ni,
 	ni->ni_fhindex = sp->fhindex;
 	ni->ni_erp = sp->erp;
 	ni->ni_timoff = sp->timoff;
-
+#ifdef IEEE80211_SUPPORT_MESH
+	if (ni->ni_vap->iv_opmode == IEEE80211_M_MBSS)
+		ieee80211_mesh_init_neighbor(ni, wh, sp);
+#endif
 	if (ieee80211_ies_init(&ni->ni_ies, sp->ies, sp->ies_len)) {
 		ieee80211_ies_expand(&ni->ni_ies);
 		if (ni->ni_ies.wme_ie != NULL)
@@ -2525,6 +2560,27 @@ get_adhoc_rssi(void *arg, struct ieee80211_node *ni)
 	}
 }
 
+#ifdef IEEE80211_SUPPORT_MESH
+static void
+get_mesh_rssi(void *arg, struct ieee80211_node *ni)
+{
+	struct rssiinfo *info = arg;
+	struct ieee80211vap *vap = ni->ni_vap;
+	int8_t rssi;
+
+	if (info->vap != vap)
+		return;
+	/* only neighbors that peered successfully */
+	if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED)
+		return;
+	rssi = vap->iv_ic->ic_node_getrssi(ni);
+	if (rssi != 0) {
+		info->rssi_samples++;
+		info->rssi_total += rssi;
+	}
+}
+#endif /* IEEE80211_SUPPORT_MESH */
+
 int8_t
 ieee80211_getrssi(struct ieee80211vap *vap)
 {
@@ -2543,6 +2599,11 @@ ieee80211_getrssi(struct ieee80211vap *vap)
 	case IEEE80211_M_HOSTAP:	/* average of all associated stations */
 		ieee80211_iterate_nodes(&ic->ic_sta, get_hostap_rssi, &info);
 		break;
+#ifdef IEEE80211_SUPPORT_MESH
+	case IEEE80211_M_MBSS:		/* average of all mesh neighbors */
+		ieee80211_iterate_nodes(&ic->ic_sta, get_mesh_rssi, &info);
+		break;
+#endif
 	case IEEE80211_M_MONITOR:	/* XXX */
 	case IEEE80211_M_STA:		/* use stats from associated ap */
 	default:

sys/net80211/ieee80211_node.h

@@ -35,7 +35,7 @@
  * Each ieee80211com instance has a single timer that fires every
  * IEEE80211_INACT_WAIT seconds to handle "inactivity processing".
  * This is used to do node inactivity processing when operating
- * as an AP or in adhoc mode.  For inactivity processing each node
+ * as an AP, adhoc or mesh mode.  For inactivity processing each node
  * has a timeout set in it's ni_inact field that is decremented
  * on each timeout and the node is reclaimed when the counter goes
  * to zero.  We use different inactivity timeout values depending
@@ -56,9 +56,9 @@
 /* threshold for aging overlapping non-ERP bss */
 #define	IEEE80211_NONERP_PRESENT_AGE	msecs_to_ticks(60*1000)
 
-#define	IEEE80211_NODE_HASHSIZE	32
+#define	IEEE80211_NODE_HASHSIZE	32		/* NB: hash size must be pow2 */
 /* simple hash is enough for variation of macaddr */
-#define	IEEE80211_NODE_HASH(addr)	\
+#define	IEEE80211_NODE_HASH(ic, addr)	\
 	(((const uint8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % \
 		IEEE80211_NODE_HASHSIZE)
 
@@ -81,12 +81,27 @@ struct ieee80211_ies {
 	uint8_t	*htcap_ie;	/* captured HTCAP ie */
 	uint8_t	*htinfo_ie;	/* captured HTINFO ie */
 	uint8_t	*tdma_ie;	/* captured TDMA ie */
+	uint8_t *meshid_ie;	/* captured MESH ID ie */
 	uint8_t	*spare[4];
 	/* NB: these must be the last members of this structure */
 	uint8_t	*data;		/* frame data > 802.11 header */
 	int	len;		/* data size in bytes */
 };
 
+/*
+ * 802.11s (Mesh) Peer Link FSM state.
+ */
+enum ieee80211_mesh_mlstate {
+	IEEE80211_NODE_MESH_IDLE	= 0,
+	IEEE80211_NODE_MESH_OPENSNT	= 1,	/* open frame sent */
+	IEEE80211_NODE_MESH_OPENRCV	= 2,	/* open frame received */
+	IEEE80211_NODE_MESH_CONFIRMRCV	= 3,	/* confirm frame received */
+	IEEE80211_NODE_MESH_ESTABLISHED	= 4,	/* link established */
+	IEEE80211_NODE_MESH_HOLDING	= 5,	/* link closing */
+};
+#define	IEEE80211_MESH_MLSTATE_BITS \
+	"\20\1IDLE\2OPENSNT\2OPENRCV\3CONFIRMRCV\4ESTABLISHED\5HOLDING"
+
 /*
  * Node specific information.  Note that drivers are expected
  * to derive from this structure to add device-specific per-node
@@ -173,6 +188,16 @@ struct ieee80211_node {
 	uint8_t			ni_dtim_period;	/* DTIM period */
 	uint8_t			ni_dtim_count;	/* DTIM count for last bcn */
 
+	/* 11s state */
+	uint8_t			ni_meshidlen;
+	uint8_t			ni_meshid[IEEE80211_MESHID_LEN];
+	enum ieee80211_mesh_mlstate ni_mlstate;	/* peering management state */
+	uint16_t		ni_mllid;	/* link local ID */
+	uint16_t		ni_mlpid;	/* link peer ID */
+	struct callout		ni_mltimer;	/* link mesh timer */
+	uint8_t			ni_mlrcnt;	/* link mesh retry counter */
+	uint8_t			ni_mltval;	/* link mesh timer value */
+
 	/* 11n state */
 	uint16_t		ni_htcap;	/* HT capabilities */
 	uint8_t			ni_htparam;	/* HT params */

sys/net80211/ieee80211_output.c

@@ -55,6 +55,7 @@ __FBSDID("$FreeBSD$");
 #include <net80211/ieee80211_tdma.h>
 #endif
 #include <net80211/ieee80211_wds.h>
+#include <net80211/ieee80211_mesh.h>
 
 #ifdef INET
 #include <netinet/in.h> 
@@ -71,6 +72,18 @@ __FBSDID("$FreeBSD$");
 #define	ETHER_HEADER_COPY(dst, src) \
 	memcpy(dst, src, sizeof(struct ether_header))
 
+/* unalligned little endian access */     
+#define LE_WRITE_2(p, v) do {				\
+	((uint8_t *)(p))[0] = (v) & 0xff;		\
+	((uint8_t *)(p))[1] = ((v) >> 8) & 0xff;	\
+} while (0)
+#define LE_WRITE_4(p, v) do {				\
+	((uint8_t *)(p))[0] = (v) & 0xff;		\
+	((uint8_t *)(p))[1] = ((v) >> 8) & 0xff;	\
+	((uint8_t *)(p))[2] = ((v) >> 16) & 0xff;	\
+	((uint8_t *)(p))[3] = ((v) >> 24) & 0xff;	\
+} while (0)
+
 static int ieee80211_fragment(struct ieee80211vap *, struct mbuf *,
 	u_int hdrsize, u_int ciphdrsize, u_int mtu);
 static	void ieee80211_tx_mgt_cb(struct ieee80211_node *, void *, int);
@@ -205,25 +218,42 @@ ieee80211_start(struct ifnet *ifp)
 				ieee80211_dwds_mcast(vap, m);
 			}
 		}
-		ni = ieee80211_find_txnode(vap, eh->ether_dhost);
-		if (ni == NULL) {
-			/* NB: ieee80211_find_txnode does stat+msg */
-			ifp->if_oerrors++;
-			m_freem(m);
-			continue;
-		}
-		if (ni->ni_associd == 0 &&
-		    (ni->ni_flags & IEEE80211_NODE_ASSOCID)) {
-			IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT,
-			    eh->ether_dhost, NULL,
-			    "sta not associated (type 0x%04x)",
-			    htons(eh->ether_type));
-			vap->iv_stats.is_tx_notassoc++;
-			ifp->if_oerrors++;
-			m_freem(m);
-			ieee80211_free_node(ni);
-			continue;
+#ifdef IEEE80211_SUPPORT_MESH
+		if (vap->iv_opmode != IEEE80211_M_MBSS) {
+#endif
+			ni = ieee80211_find_txnode(vap, eh->ether_dhost);
+			if (ni == NULL) {
+				/* NB: ieee80211_find_txnode does stat+msg */
+				ifp->if_oerrors++;
+				m_freem(m);
+				continue;
+			}
+			if (ni->ni_associd == 0 &&
+			    (ni->ni_flags & IEEE80211_NODE_ASSOCID)) {
+				IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT,
+				    eh->ether_dhost, NULL,
+				    "sta not associated (type 0x%04x)",
+				    htons(eh->ether_type));
+				vap->iv_stats.is_tx_notassoc++;
+				ifp->if_oerrors++;
+				m_freem(m);
+				ieee80211_free_node(ni);
+				continue;
+			}
+#ifdef IEEE80211_SUPPORT_MESH
+		} else {
+			ni = ieee80211_mesh_discover(vap, eh->ether_dhost, m);
+			if (ni == NULL) {
+				/*
+				 * NB: ieee80211_mesh_discover function
+				 *   holds/disposes frame
+				 *   (e.g. queueing on path discovery).
+				 */
+				ifp->if_oerrors++;
+				continue;
+			}
 		}
+#endif
 
 		if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) &&
 		    (m->m_flags & M_PWR_SAV) == 0) {
@@ -455,7 +485,7 @@ bad:
  * frame.  Note this should be called early on in constructing
  * a frame as it sets i_fc[1]; other bits can then be or'd in.
  */
-static void
+void
 ieee80211_send_setup(
 	struct ieee80211_node *ni,
 	struct mbuf *m,
@@ -465,13 +495,12 @@ ieee80211_send_setup(
 	const uint8_t bssid[IEEE80211_ADDR_LEN])
 {
 #define	WH4(wh)	((struct ieee80211_frame_addr4 *)wh)
+	struct ieee80211vap *vap = ni->ni_vap;
 	struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *);
 	ieee80211_seq seqno;
 
 	wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | type;
 	if ((type & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) {
-		struct ieee80211vap *vap = ni->ni_vap;
-
 		switch (vap->iv_opmode) {
 		case IEEE80211_M_STA:
 			wh->i_fc[1] = IEEE80211_FC1_DIR_TODS;
@@ -499,6 +528,25 @@ ieee80211_send_setup(
 			IEEE80211_ADDR_COPY(wh->i_addr3, da);
 			IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa);
 			break;
+		case IEEE80211_M_MBSS:
+#ifdef IEEE80211_SUPPORT_MESH
+			/* XXX add support for proxied addresses */
+			if (IEEE80211_IS_MULTICAST(da)) {
+				wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS;
+				/* XXX next hop */
+				IEEE80211_ADDR_COPY(wh->i_addr1, da);
+				IEEE80211_ADDR_COPY(wh->i_addr2,
+				    vap->iv_myaddr);
+			} else {
+				wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS;
+				IEEE80211_ADDR_COPY(wh->i_addr1, da);
+				IEEE80211_ADDR_COPY(wh->i_addr2,
+				    vap->iv_myaddr);
+				IEEE80211_ADDR_COPY(wh->i_addr3, da);
+				IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa);
+			}
+#endif
+			break;
 		case IEEE80211_M_MONITOR:	/* NB: to quiet compiler */
 			break;
 		}
@@ -506,7 +554,12 @@ ieee80211_send_setup(
 		wh->i_fc[1] = IEEE80211_FC1_DIR_NODS;
 		IEEE80211_ADDR_COPY(wh->i_addr1, da);
 		IEEE80211_ADDR_COPY(wh->i_addr2, sa);
-		IEEE80211_ADDR_COPY(wh->i_addr3, bssid);
+#ifdef IEEE80211_SUPPORT_MESH
+		if (vap->iv_opmode == IEEE80211_M_MBSS)
+			IEEE80211_ADDR_COPY(wh->i_addr3, sa);
+		else
+#endif
+			IEEE80211_ADDR_COPY(wh->i_addr3, bssid);
 	}
 	*(uint16_t *)&wh->i_dur[0] = 0;
 
@@ -932,12 +985,18 @@ ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni,
 {
 #define	WH4(wh)	((struct ieee80211_frame_addr4 *)(wh))
 	struct ieee80211com *ic = ni->ni_ic;
+#ifdef IEEE80211_SUPPORT_MESH
+	struct ieee80211_mesh_state *ms = vap->iv_mesh;
+	struct ieee80211_meshcntl_ae11 *mc;
+#endif
 	struct ether_header eh;
 	struct ieee80211_frame *wh;
 	struct ieee80211_key *key;
 	struct llc *llc;
 	int hdrsize, hdrspace, datalen, addqos, txfrag, is4addr;
 	ieee80211_seq seqno;
+	int meshhdrsize, meshae;
+	uint8_t *qos;
 
 	/*
 	 * Copy existing Ethernet header to a safe place.  The
@@ -990,17 +1049,56 @@ ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni,
 		hdrsize = sizeof(struct ieee80211_qosframe);
 	else
 		hdrsize = sizeof(struct ieee80211_frame);
-	/*
-	 * 4-address frames need to be generated for:
-	 * o packets sent through a WDS vap (IEEE80211_M_WDS)
-	 * o packets sent through a vap marked for relaying
-	 *   (e.g. a station operating with dynamic WDS)
-	 */
-	is4addr = vap->iv_opmode == IEEE80211_M_WDS ||
-	    ((vap->iv_flags_ext & IEEE80211_FEXT_4ADDR) &&
-	     !IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr));
-	if (is4addr)
-		hdrsize += IEEE80211_ADDR_LEN;
+#ifdef IEEE80211_SUPPORT_MESH
+	if (vap->iv_opmode == IEEE80211_M_MBSS) {
+		/*
+		 * Mesh data frames are encapsulated according to the
+		 * rules of Section 11B.8.5 (p.139 of D3.0 spec).
+		 * o Group Addressed data (aka multicast) originating
+		 *   at the local sta are sent w/ 3-address format and
+		 *   address extension mode 00
+		 * o Individually Addressed data (aka unicast) originating
+		 *   at the local sta are sent w/ 4-address format and
+		 *   address extension mode 00
+		 * o Group Addressed data forwarded from a non-mesh sta are
+		 *   sent w/ 3-address format and address extension mode 01
+		 * o Individually Address data from another sta are sent
+		 *   w/ 4-address format and address extension mode 10
+		 */
+		is4addr = 0;		/* NB: don't use, disable */
+		meshhdrsize = sizeof(struct ieee80211_meshcntl);
+		/* XXX defines for AE modes */
+		/* XXX not right, need to check if from non-mesh-sta */
+		if (IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)) {
+			if (!IEEE80211_IS_MULTICAST(eh.ether_dhost)) {
+				hdrsize += IEEE80211_ADDR_LEN;
+				meshae = 0;
+			} else
+				meshae = 4;		/* NB: pseudo */
+		} else if (IEEE80211_IS_MULTICAST(eh.ether_dhost)) {
+			meshae = 1;
+			meshhdrsize += 2*IEEE80211_ADDR_LEN;
+		} else {
+			meshae = 2;
+			meshhdrsize += 3*IEEE80211_ADDR_LEN;
+		}
+	} else {
+#endif
+		/*
+		 * 4-address frames need to be generated for:
+		 * o packets sent through a WDS vap (IEEE80211_M_WDS)
+		 * o packets sent through a vap marked for relaying
+		 *   (e.g. a station operating with dynamic WDS)
+		 */
+		is4addr = vap->iv_opmode == IEEE80211_M_WDS ||
+		    ((vap->iv_flags_ext & IEEE80211_FEXT_4ADDR) &&
+		     !IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr));
+		if (is4addr)
+			hdrsize += IEEE80211_ADDR_LEN;
+		meshhdrsize = meshae = 0;
+#ifdef IEEE80211_SUPPORT_MESH
+	}
+#endif
 	/*
 	 * Honor driver DATAPAD requirement.
 	 */
@@ -1013,7 +1111,7 @@ ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni,
 		/*
 		 * Normal frame.
 		 */
-		m = ieee80211_mbuf_adjust(vap, hdrspace, key, m);
+		m = ieee80211_mbuf_adjust(vap, hdrspace + meshhdrsize, key, m);
 		if (m == NULL) {
 			/* NB: ieee80211_mbuf_adjust handles msgs+statistics */
 			goto bad;
@@ -1032,14 +1130,14 @@ ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni,
 		/*
 		 * Aggregated frame.
 		 */
-		m = ieee80211_ff_encap(vap, m, hdrspace, key);
+		m = ieee80211_ff_encap(vap, m, hdrspace + meshhdrsize, key);
 		if (m == NULL)
 #endif
 			goto bad;
 	}
 	datalen = m->m_pkthdr.len;		/* NB: w/o 802.11 header */
 
-	M_PREPEND(m, hdrspace, M_DONTWAIT);
+	M_PREPEND(m, hdrspace + meshhdrsize, M_DONTWAIT);
 	if (m == NULL) {
 		vap->iv_stats.is_tx_nobuf++;
 		goto bad;
@@ -1047,6 +1145,7 @@ ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni,
 	wh = mtod(m, struct ieee80211_frame *);
 	wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA;
 	*(uint16_t *)wh->i_dur = 0;
+	qos = NULL;	/* NB: quiet compiler */
 	if (is4addr) {
 		wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS;
 		IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr);
@@ -1077,19 +1176,73 @@ ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni,
 		IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid);
 		IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost);
 		break;
-	case IEEE80211_M_MONITOR:
+#ifdef IEEE80211_SUPPORT_MESH
+	case IEEE80211_M_MBSS:
+		/* NB: offset by hdrspace to deal with DATAPAD */
+		mc = (struct ieee80211_meshcntl_ae11 *)
+		     (mtod(m, uint8_t *) + hdrspace);
+		switch (meshae) {
+		case 0:			/* ucast, no proxy */
+			wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS;
+			IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr);
+			IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr);
+			IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost);
+			IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, eh.ether_shost);
+			mc->mc_flags = 0;
+			qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos;
+			break;
+		case 4:			/* mcast, no proxy */
+			wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS;
+			IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost);
+			IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr);
+			IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost);
+			mc->mc_flags = 0;		/* NB: AE is really 0 */
+			qos = ((struct ieee80211_qosframe *) wh)->i_qos;
+			break;
+		case 1:			/* mcast, proxy */
+			wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS;
+			IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost);
+			IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr);
+			/* XXX not right, need MeshSA */
+			IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost);
+			mc->mc_flags = 1;
+			IEEE80211_ADDR_COPY(mc->mc_addr4, eh.ether_shost);
+			qos = ((struct ieee80211_qosframe *) wh)->i_qos;
+			break;
+		case 2:			/* ucast, proxy */
+			wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS;
+			IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr);
+			IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr);
+			/* XXX not right, need MeshDA+MeshSA */
+			IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost);
+			IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, eh.ether_shost);
+			mc->mc_flags = 2;
+			IEEE80211_ADDR_COPY(mc->mc_addr5, eh.ether_shost);
+			IEEE80211_ADDR_COPY(mc->mc_addr6, eh.ether_shost);
+			qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos;
+			break;
+		default:
+			KASSERT(0, ("meshae %d", meshae));
+			break;
+		}
+		mc->mc_ttl = ms->ms_ttl;
+		ms->ms_seq++;
+		LE_WRITE_4(mc->mc_seq, ms->ms_seq);
+		break;
+#endif
 	case IEEE80211_M_WDS:		/* NB: is4addr should always be true */
+	default:
 		goto bad;
 	}
 	if (m->m_flags & M_MORE_DATA)
 		wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA;
 	if (addqos) {
-		uint8_t *qos;
 		int ac, tid;
 
 		if (is4addr) {
 			qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos;
-		} else
+		/* NB: mesh case handled earlier */
+		} else if (vap->iv_opmode != IEEE80211_M_MBSS)
 			qos = ((struct ieee80211_qosframe *) wh)->i_qos;
 		ac = M_WME_GETAC(m);
 		/* map from access class/queue to 11e header priorty value */
@@ -1125,6 +1278,7 @@ ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni,
 		M_SEQNO_SET(m, seqno);
 	}
 
+
 	/* check if xmit fragmentation is required */
 	txfrag = (m->m_pkthdr.len > vap->iv_fragthreshold &&
 	    !IEEE80211_IS_MULTICAST(wh->i_addr1) &&
@@ -1271,7 +1425,7 @@ bad:
 /*
  * Add a supported rates element id to a frame.
  */
-static uint8_t *
+uint8_t *
 ieee80211_add_rates(uint8_t *frm, const struct ieee80211_rateset *rs)
 {
 	int nrates;
@@ -1288,7 +1442,7 @@ ieee80211_add_rates(uint8_t *frm, const struct ieee80211_rateset *rs)
 /*
  * Add an extended supported rates element id to a frame.
  */
-static uint8_t *
+uint8_t *
 ieee80211_add_xrates(uint8_t *frm, const struct ieee80211_rateset *rs)
 {
 	/*
@@ -1343,10 +1497,9 @@ ieee80211_add_erp(uint8_t *frm, struct ieee80211com *ic)
 static uint8_t *
 ieee80211_add_cfparms(uint8_t *frm, struct ieee80211com *ic)
 {
-#define	ADDSHORT(frm, v) do {			\
-	frm[0] = (v) & 0xff;			\
-	frm[1] = (v) >> 8;			\
-	frm += 2;				\
+#define	ADDSHORT(frm, v) do {	\
+	LE_WRITE_2(frm, v);	\
+	frm += 2;		\
 } while (0)
 	*frm++ = IEEE80211_ELEMID_CFPARMS;
 	*frm++ = 6;
@@ -1399,10 +1552,9 @@ static uint8_t *
 ieee80211_add_wme_param(uint8_t *frm, struct ieee80211_wme_state *wme)
 {
 #define	SM(_v, _f)	(((_v) << _f##_S) & _f)
-#define	ADDSHORT(frm, v) do {			\
-	frm[0] = (v) & 0xff;			\
-	frm[1] = (v) >> 8;			\
-	frm += 2;				\
+#define	ADDSHORT(frm, v) do {	\
+	LE_WRITE_2(frm, v);	\
+	frm += 2;		\
 } while (0)
 	/* NB: this works 'cuz a param has an info at the front */
 	static const struct ieee80211_wme_info param = {
@@ -1649,8 +1801,8 @@ ieee80211_send_probereq(struct ieee80211_node *ni,
 /*
  * Calculate capability information for mgt frames.
  */
-static uint16_t
-getcapinfo(struct ieee80211vap *vap, struct ieee80211_channel *chan)
+uint16_t
+ieee80211_getcapinfo(struct ieee80211vap *vap, struct ieee80211_channel *chan)
 {
 	struct ieee80211com *ic = vap->iv_ic;
 	uint16_t capinfo;
@@ -1945,7 +2097,7 @@ ieee80211_send_mgmt(struct ieee80211_node *ni, int type, int arg)
 		if (m == NULL)
 			senderr(ENOMEM, is_tx_nobuf);
 
-		capinfo = getcapinfo(vap, bss->ni_chan);
+		capinfo = ieee80211_getcapinfo(vap, bss->ni_chan);
 		*(uint16_t *)frm = htole16(capinfo);
 		frm += 2;
 
@@ -2060,6 +2212,8 @@ ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy)
 	 *	[tlv] Vendor OUI HT information (optional)
 	 *	[tlv] Atheros capabilities
 	 *	[tlv] AppIE's (optional)
+	 *	[tlv] Mesh ID (MBSS)
+	 *	[tlv] Mesh Conf (MBSS)
 	 */
 	m = ieee80211_getmgtframe(&frm,
 		 ic->ic_headroom + sizeof(struct ieee80211_frame),
@@ -2083,6 +2237,10 @@ ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy)
 	       + 4 + sizeof(struct ieee80211_ie_htinfo)
 #ifdef IEEE80211_SUPPORT_SUPERG
 	       + sizeof(struct ieee80211_ath_ie)
+#endif
+#ifdef IEEE80211_SUPPORT_MESH
+	       + 2 + IEEE80211_MESHID_LEN
+	       + sizeof(struct ieee80211_meshconf_ie)
 #endif
 	       + (vap->iv_appie_proberesp != NULL ?
 			vap->iv_appie_proberesp->ie_len : 0)
@@ -2096,7 +2254,7 @@ ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy)
 	frm += 8;
 	*(uint16_t *)frm = htole16(bss->ni_intval);
 	frm += 2;
-	capinfo = getcapinfo(vap, bss->ni_chan);
+	capinfo = ieee80211_getcapinfo(vap, bss->ni_chan);
 	*(uint16_t *)frm = htole16(capinfo);
 	frm += 2;
 
@@ -2173,6 +2331,12 @@ ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy)
 #endif
 	if (vap->iv_appie_proberesp != NULL)
 		frm = add_appie(frm, vap->iv_appie_proberesp);
+#ifdef IEEE80211_SUPPORT_MESH
+	if (vap->iv_opmode == IEEE80211_M_MBSS) {
+		frm = ieee80211_add_meshid(frm, vap);
+		frm = ieee80211_add_meshconf(frm, vap);
+	}
+#endif
 	m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
 
 	return m;
@@ -2365,6 +2529,8 @@ ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm,
 	 *	[tlv] Vendor OUI HT information (optional)
 	 *	[tlv] Atheros capabilities (optional)
 	 *	[tlv] TDMA parameters (optional)
+	 *	[tlv] Mesh ID (MBSS)
+	 *	[tlv] Mesh Conf (MBSS)
 	 *	[tlv] application data (optional)
 	 */
 
@@ -2374,7 +2540,7 @@ ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm,
 	frm += 8;
 	*(uint16_t *)frm = htole16(ni->ni_intval);
 	frm += 2;
-	capinfo = getcapinfo(vap, ni->ni_chan);
+	capinfo = ieee80211_getcapinfo(vap, ni->ni_chan);
 	bo->bo_caps = (uint16_t *)frm;
 	*(uint16_t *)frm = htole16(capinfo);
 	frm += 2;
@@ -2401,7 +2567,9 @@ ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm,
 		*frm++ = 2;
 		*frm++ = 0; *frm++ = 0;		/* TODO: ATIM window */
 		bo->bo_tim_len = 0;
-	} else if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
+	} else if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
+	    vap->iv_opmode == IEEE80211_M_MBSS) {
+		/* TIM IE is the same for Mesh and Hostap */
 		struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) frm;
 
 		tie->tim_ie = IEEE80211_ELEMID_TIM;
@@ -2471,6 +2639,12 @@ ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm,
 		bo->bo_appie_len = vap->iv_appie_beacon->ie_len;
 		frm = add_appie(frm, vap->iv_appie_beacon);
 	}
+#ifdef IEEE80211_SUPPORT_MESH
+	if (vap->iv_opmode == IEEE80211_M_MBSS) {
+		frm = ieee80211_add_meshid(frm, vap);
+		frm = ieee80211_add_meshconf(frm, vap);
+	}
+#endif
 	bo->bo_tim_trailer_len = frm - bo->bo_tim_trailer;
 	bo->bo_csa_trailer_len = frm - bo->bo_csa;
 	m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
@@ -2515,6 +2689,8 @@ ieee80211_beacon_alloc(struct ieee80211_node *ni,
 	 *	[tlv] WPA parameters
 	 *	[tlv] WME parameters
 	 *	[tlv] TDMA parameters (optional)
+	 *	[tlv] Mesh ID (MBSS)
+	 *	[tlv] Mesh Conf (MBSS)
 	 *	[tlv] application data (optional)
 	 * NB: we allocate the max space required for the TIM bitmap.
 	 * XXX how big is this?
@@ -2545,6 +2721,10 @@ ieee80211_beacon_alloc(struct ieee80211_node *ni,
 #ifdef IEEE80211_SUPPORT_TDMA
 		 + (vap->iv_caps & IEEE80211_C_TDMA ?	/* TDMA */
 			sizeof(struct ieee80211_tdma_param) : 0)
+#endif
+#ifdef IEEE80211_SUPPORT_MESH
+		 + 2 + ni->ni_meshidlen
+		 + sizeof(struct ieee80211_meshconf_ie)
 #endif
 		 + IEEE80211_MAX_APPIE
 		 ;
@@ -2567,7 +2747,13 @@ ieee80211_beacon_alloc(struct ieee80211_node *ni,
 	*(uint16_t *)wh->i_dur = 0;
 	IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr);
 	IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr);
-	IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid);
+#ifdef IEEE80211_SUPPORT_MESH
+	if (vap->iv_opmode == IEEE80211_M_MBSS) {
+		static const uint8_t zerobssid[IEEE80211_ADDR_LEN];
+		IEEE80211_ADDR_COPY(wh->i_addr3, zerobssid);
+	} else
+#endif
+		IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid);
 	*(uint16_t *)wh->i_seq = 0;
 
 	return m;
@@ -2616,7 +2802,7 @@ ieee80211_beacon_update(struct ieee80211_node *ni,
 	}
 
 	/* XXX faster to recalculate entirely or just changes? */
-	capinfo = getcapinfo(vap, ni->ni_chan);
+	capinfo = ieee80211_getcapinfo(vap, ni->ni_chan);
 	*bo->bo_caps = htole16(capinfo);
 
 	if (vap->iv_flags & IEEE80211_F_WME) {
@@ -2672,7 +2858,8 @@ ieee80211_beacon_update(struct ieee80211_node *ni,
 		ieee80211_tdma_update_beacon(vap, bo);
 	}
 #endif
-	if (vap->iv_opmode == IEEE80211_M_HOSTAP) {	/* NB: no IBSS support*/
+	if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
+	    vap->iv_opmode == IEEE80211_M_MBSS) {	/* NB: no IBSS support*/
 		struct ieee80211_tim_ie *tie =
 			(struct ieee80211_tim_ie *) bo->bo_tim;
 		if (isset(bo->bo_flags, IEEE80211_BEACON_TIM)) {

sys/net80211/ieee80211_proto.c

@@ -50,6 +50,9 @@ __FBSDID("$FreeBSD$");
 #include <net80211/ieee80211_sta.h>
 #include <net80211/ieee80211_hostap.h>
 #include <net80211/ieee80211_wds.h>
+#ifdef IEEE80211_SUPPORT_MESH
+#include <net80211/ieee80211_mesh.h>
+#endif
 #include <net80211/ieee80211_monitor.h>
 #include <net80211/ieee80211_input.h>
 
@@ -75,7 +78,8 @@ const char *ieee80211_opmode_name[IEEE80211_OPMODE_MAX] = {
 	"WDS",		/* IEEE80211_M_WDS */
 	"AHDEMO",	/* IEEE80211_M_AHDEMO */
 	"HOSTAP",	/* IEEE80211_M_HOSTAP */
-	"MONITOR"	/* IEEE80211_M_MONITOR */
+	"MONITOR",	/* IEEE80211_M_MONITOR */
+	"MBSS"		/* IEEE80211_M_MBSS */
 };
 const char *ieee80211_state_name[IEEE80211_S_MAX] = {
 	"INIT",		/* IEEE80211_S_INIT */
@@ -152,6 +156,9 @@ ieee80211_proto_attach(struct ieee80211com *ic)
 	ieee80211_sta_attach(ic);
 	ieee80211_wds_attach(ic);
 	ieee80211_hostap_attach(ic);
+#ifdef IEEE80211_SUPPORT_MESH
+	ieee80211_mesh_attach(ic);
+#endif
 	ieee80211_monitor_attach(ic);
 }
 
@@ -159,6 +166,9 @@ void
 ieee80211_proto_detach(struct ieee80211com *ic)
 {
 	ieee80211_monitor_detach(ic);
+#ifdef IEEE80211_SUPPORT_MESH
+	ieee80211_mesh_detach(ic);
+#endif
 	ieee80211_hostap_detach(ic);
 	ieee80211_wds_detach(ic);
 	ieee80211_adhoc_detach(ic);
@@ -1456,7 +1466,8 @@ ieee80211_csa_startswitch(struct ieee80211com *ic,
 	ic->ic_flags |= IEEE80211_F_CSAPENDING;
 	TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
 		if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
-		    vap->iv_opmode == IEEE80211_M_IBSS)
+		    vap->iv_opmode == IEEE80211_M_IBSS ||
+		    vap->iv_opmode == IEEE80211_M_MBSS)
 			ieee80211_beacon_notify(vap, IEEE80211_BEACON_CSA);
 		/* switch to CSA state to block outbound traffic */
 		if (vap->iv_state == IEEE80211_S_RUN)

sys/net80211/ieee80211_proto.h

@@ -71,6 +71,9 @@ int	ieee80211_raw_xmit(struct ieee80211_node *, struct mbuf *,
 		const struct ieee80211_bpf_params *);
 int	ieee80211_output(struct ifnet *, struct mbuf *,
                struct sockaddr *, struct route *ro);
+void	ieee80211_send_setup(struct ieee80211_node *, struct mbuf *, int, int,
+        const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN],
+        const uint8_t [IEEE80211_ADDR_LEN]);
 void	ieee80211_start(struct ifnet *);
 int	ieee80211_send_nulldata(struct ieee80211_node *);
 int	ieee80211_classify(struct ieee80211_node *, struct mbuf *m);
@@ -102,6 +105,11 @@ struct mbuf *ieee80211_alloc_rts(struct ieee80211com *ic,
 struct mbuf *ieee80211_alloc_cts(struct ieee80211com *,
 		const uint8_t [IEEE80211_ADDR_LEN], uint16_t);
 
+uint8_t *ieee80211_add_rates(uint8_t *, const struct ieee80211_rateset *);
+uint8_t *ieee80211_add_xrates(uint8_t *, const struct ieee80211_rateset *);
+uint16_t ieee80211_getcapinfo(struct ieee80211vap *,
+		struct ieee80211_channel *);
+
 void	ieee80211_reset_erp(struct ieee80211com *);
 void	ieee80211_set_shortslottime(struct ieee80211com *, int onoff);
 int	ieee80211_iserp_rateset(const struct ieee80211_rateset *);

sys/net80211/ieee80211_scan.c

@@ -209,6 +209,7 @@ static const char *scan_modnames[IEEE80211_OPMODE_MAX] = {
 	"wlan_scan_sta",	/* IEEE80211_M_AHDEMO */
 	"wlan_scan_ap",		/* IEEE80211_M_HOSTAP */
 	"wlan_scan_monitor",	/* IEEE80211_M_MONITOR */
+	"wlan_scan_sta",	/* IEEE80211_M_MBSS */
 };
 static const struct ieee80211_scanner *scanners[IEEE80211_OPMODE_MAX];
 

sys/net80211/ieee80211_scan.h

@@ -213,6 +213,8 @@ struct ieee80211_scanparams {
 	uint8_t		*ath;
 	uint8_t		*tdma;
 	uint8_t		*csa;
+	uint8_t		*meshid;
+	uint8_t		*meshconf;
 	uint8_t		*spare[3];
 };
 
@@ -242,6 +244,7 @@ struct ieee80211_scan_entry {
 	int8_t		se_rssi;	/* avg'd recv ssi */
 	int8_t		se_noise;	/* noise floor */
 	uint8_t		se_cc[2];	/* captured country code */
+	uint8_t		se_meshid[2+IEEE80211_MESHID_LEN];
 	struct ieee80211_ies se_ies;	/* captured ie's */
 	u_int		se_age;		/* age of entry (0 on create) */
 };

sys/net80211/ieee80211_scan_sta.c

@@ -48,6 +48,9 @@ __FBSDID("$FreeBSD$");
 #ifdef IEEE80211_SUPPORT_TDMA
 #include <net80211/ieee80211_tdma.h>
 #endif
+#ifdef IEEE80211_SUPPORT_MESH
+#include <net80211/ieee80211_mesh.h>
+#endif
 
 #include <net/bpf.h>
 
@@ -112,21 +115,23 @@ static void sta_flush_table(struct sta_table *);
  * contents explains why.  The following flags are or'd to to this
  * mask and can be used to figure out why the entry was rejected.
  */
-#define	MATCH_CHANNEL		0x0001	/* channel mismatch */
-#define	MATCH_CAPINFO		0x0002	/* capabilities mismatch, e.g. no ess */
-#define	MATCH_PRIVACY		0x0004	/* privacy mismatch */
-#define	MATCH_RATE		0x0008	/* rate set mismatch */
-#define	MATCH_SSID		0x0010	/* ssid mismatch */
-#define	MATCH_BSSID		0x0020	/* bssid mismatch */
-#define	MATCH_FAILS		0x0040	/* too many failed auth attempts */
-#define	MATCH_NOTSEEN		0x0080	/* not seen in recent scans */
-#define	MATCH_RSSI		0x0100	/* rssi deemed too low to use */
-#define	MATCH_CC		0x0200	/* country code mismatch */
-#define	MATCH_TDMA_NOIE		0x0400	/* no TDMA ie */
-#define	MATCH_TDMA_NOTMASTER	0x0800	/* not TDMA master */
-#define	MATCH_TDMA_NOSLOT	0x1000	/* all TDMA slots occupied */
-#define	MATCH_TDMA_LOCAL	0x2000	/* local address */
-#define	MATCH_TDMA_VERSION	0x4000	/* protocol version mismatch */
+#define	MATCH_CHANNEL		0x00001	/* channel mismatch */
+#define	MATCH_CAPINFO		0x00002	/* capabilities mismatch, e.g. no ess */
+#define	MATCH_PRIVACY		0x00004	/* privacy mismatch */
+#define	MATCH_RATE		0x00008	/* rate set mismatch */
+#define	MATCH_SSID		0x00010	/* ssid mismatch */
+#define	MATCH_BSSID		0x00020	/* bssid mismatch */
+#define	MATCH_FAILS		0x00040	/* too many failed auth attempts */
+#define	MATCH_NOTSEEN		0x00080	/* not seen in recent scans */
+#define	MATCH_RSSI		0x00100	/* rssi deemed too low to use */
+#define	MATCH_CC		0x00200	/* country code mismatch */
+#define	MATCH_TDMA_NOIE		0x00400	/* no TDMA ie */
+#define	MATCH_TDMA_NOTMASTER	0x00800	/* not TDMA master */
+#define	MATCH_TDMA_NOSLOT	0x01000	/* all TDMA slots occupied */
+#define	MATCH_TDMA_LOCAL	0x02000	/* local address */
+#define	MATCH_TDMA_VERSION	0x04000	/* protocol version mismatch */
+#define	MATCH_MESH_NOID		0x10000	/* no MESHID ie */
+#define	MATCH_MESHID		0x20000	/* meshid mismatch */
 static int match_bss(struct ieee80211vap *,
 	const struct ieee80211_scan_state *, struct sta_entry *, int);
 static void adhoc_age(struct ieee80211_scan_state *);
@@ -139,6 +144,10 @@ isocmp(const uint8_t cc1[], const uint8_t cc2[])
 
 /* number of references from net80211 layer */
 static	int nrefs = 0;
+/*
+ * Module glue.
+ */
+IEEE80211_SCANNER_MODULE(sta, 1);
 
 /*
  * Attach prior to any scanning work.
@@ -281,6 +290,10 @@ found:
 	memcpy(ise->se_tstamp.data, sp->tstamp, sizeof(ise->se_tstamp));
 	ise->se_intval = sp->bintval;
 	ise->se_capinfo = sp->capinfo;
+#ifdef IEEE80211_SUPPORT_MESH
+	if (sp->meshid != NULL && sp->meshid[1] != 0)
+		memcpy(ise->se_meshid, sp->meshid, 2+sp->meshid[1]);
+#endif
 	/*
 	 * Beware of overriding se_chan for frames seen
 	 * off-channel; this can cause us to attempt an
@@ -895,6 +908,12 @@ back:
 #undef RV
 }
 
+static __inline int
+match_id(const uint8_t *ie, const uint8_t *val, int len)
+{
+	return (ie[1] == len && memcmp(ie+2, val, len) == 0);
+}
+
 static int
 match_ssid(const uint8_t *ie,
 	int nssid, const struct ieee80211_scan_ssid ssids[])
@@ -902,8 +921,7 @@ match_ssid(const uint8_t *ie,
 	int i;
 
 	for (i = 0; i < nssid; i++) {
-		if (ie[1] == ssids[i].len &&
-		     memcmp(ie+2, ssids[i].ssid, ie[1]) == 0)
+		if (match_id(ie, ssids[i].ssid, ssids[i].len))
 			return 1;
 	}
 	return 0;
@@ -986,7 +1004,22 @@ match_bss(struct ieee80211vap *vap,
 #endif
 		}
 #endif /* IEEE80211_SUPPORT_TDMA */
+#ifdef IEEE80211_SUPPORT_MESH
+	} else if (vap->iv_opmode == IEEE80211_M_MBSS) {
+		const struct ieee80211_mesh_state *ms = vap->iv_mesh;
+		/*
+		 * Mesh nodes have IBSS & ESS bits in capinfo turned off
+		 * and two special ie's that must be present.
+		 */
+		if (se->se_capinfo & (IEEE80211_CAPINFO_IBSS|IEEE80211_CAPINFO_ESS))
+			fail |= MATCH_CAPINFO;
+		else if (se->se_meshid == NULL)
+			fail |= MATCH_MESH_NOID;
+		else if (ms->ms_idlen != 0 &&
+		    match_id(se->se_meshid, ms->ms_id, ms->ms_idlen))
+			fail |= MATCH_MESHID;
 	} else {
+#endif
 		if ((se->se_capinfo & IEEE80211_CAPINFO_ESS) == 0)
 			fail |= MATCH_CAPINFO;
 		/*
@@ -1070,6 +1103,7 @@ match_bss(struct ieee80211vap *vap,
 		    fail & MATCH_TDMA_NOSLOT ? 'f' :
 		    fail & MATCH_TDMA_LOCAL ? 'l' :
 #endif
+		    fail & MATCH_MESH_NOID ? 'm' :
 		    fail ? '-' : '+', ether_sprintf(se->se_macaddr));
 		printf(" %s%c", ether_sprintf(se->se_bssid),
 		    fail & MATCH_BSSID ? '!' : ' ');
@@ -1087,7 +1121,7 @@ match_bss(struct ieee80211vap *vap,
 		    "wep" : "no",
 		    fail & MATCH_PRIVACY ? '!' : ' ');
 		ieee80211_print_essid(se->se_ssid+2, se->se_ssid[1]);
-		printf("%s\n", fail & MATCH_SSID ? "!" : "");
+		printf("%s\n", fail & (MATCH_SSID | MATCH_MESHID) ? "!" : "");
 	}
 #endif
 	return fail;
@@ -1415,6 +1449,7 @@ static const struct ieee80211_scanner sta_default = {
 	.scan_assoc_fail	= sta_assoc_fail,
 	.scan_assoc_success	= sta_assoc_success,
 };
+IEEE80211_SCANNER_ALG(sta, IEEE80211_M_STA, sta_default);
 
 /*
  * Adhoc mode-specific support.
@@ -1514,7 +1549,8 @@ adhoc_pick_bss(struct ieee80211_scan_state *ss, struct ieee80211vap *vap)
 	struct ieee80211_channel *chan;
 
 	KASSERT(vap->iv_opmode == IEEE80211_M_IBSS ||
-		vap->iv_opmode == IEEE80211_M_AHDEMO,
+		vap->iv_opmode == IEEE80211_M_AHDEMO ||
+		vap->iv_opmode == IEEE80211_M_MBSS,
 		("wrong opmode %u", vap->iv_opmode));
 
 	if (st->st_newscan) {
@@ -1630,6 +1666,8 @@ static const struct ieee80211_scanner adhoc_default = {
 	.scan_assoc_fail	= sta_assoc_fail,
 	.scan_assoc_success	= sta_assoc_success,
 };
+IEEE80211_SCANNER_ALG(ibss, IEEE80211_M_IBSS, adhoc_default);
+IEEE80211_SCANNER_ALG(ahdemo, IEEE80211_M_AHDEMO, adhoc_default);
 
 static void
 ap_force_promisc(struct ieee80211com *ic)
@@ -1781,12 +1819,108 @@ static const struct ieee80211_scanner ap_default = {
 	.scan_assoc_success	= sta_assoc_success,
 	.scan_assoc_fail	= sta_assoc_fail,
 };
-
-/*
- * Module glue.
- */
-IEEE80211_SCANNER_MODULE(sta, 1);
-IEEE80211_SCANNER_ALG(sta, IEEE80211_M_STA, sta_default);
-IEEE80211_SCANNER_ALG(ibss, IEEE80211_M_IBSS, adhoc_default);
-IEEE80211_SCANNER_ALG(ahdemo, IEEE80211_M_AHDEMO, adhoc_default);
 IEEE80211_SCANNER_ALG(ap, IEEE80211_M_HOSTAP, ap_default);
+
+#ifdef IEEE80211_SUPPORT_MESH
+/*
+ * Pick an mbss network to join or find a channel
+ * to use to start an mbss network.
+ */
+static int
+mesh_pick_bss(struct ieee80211_scan_state *ss, struct ieee80211vap *vap)
+{
+	struct sta_table *st = ss->ss_priv;
+	struct ieee80211_mesh_state *ms = vap->iv_mesh;
+	struct sta_entry *selbs;
+	struct ieee80211_channel *chan;
+
+	KASSERT(vap->iv_opmode == IEEE80211_M_MBSS,
+		("wrong opmode %u", vap->iv_opmode));
+
+	if (st->st_newscan) {
+		sta_update_notseen(st);
+		st->st_newscan = 0;
+	}
+	if (ss->ss_flags & IEEE80211_SCAN_NOPICK) {
+		/*
+		 * Manual/background scan, don't select+join the
+		 * bss, just return.  The scanning framework will
+		 * handle notification that this has completed.
+		 */
+		ss->ss_flags &= ~IEEE80211_SCAN_NOPICK;
+		return 1;
+	}
+	/*
+	 * Automatic sequencing; look for a candidate and
+	 * if found join the network.
+	 */
+	/* NB: unlocked read should be ok */
+	if (TAILQ_FIRST(&st->st_entry) == NULL) {
+		IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
+			"%s: no scan candidate\n", __func__);
+		if (ss->ss_flags & IEEE80211_SCAN_NOJOIN)
+			return 0;
+notfound:
+		if (ms->ms_idlen != 0) {
+			/*
+			 * No existing mbss network to join and we have
+			 * a meshid; start one up.  If no channel was
+			 * specified, try to select a channel.
+			 */
+			if (vap->iv_des_chan == IEEE80211_CHAN_ANYC ||
+			    IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) {
+				struct ieee80211com *ic = vap->iv_ic;
+
+				chan = adhoc_pick_channel(ss, 0);
+				if (chan != NULL)
+					chan = ieee80211_ht_adjust_channel(ic,
+					    chan, vap->iv_flags_ht);
+			} else
+				chan = vap->iv_des_chan;
+			if (chan != NULL) {
+				ieee80211_create_ibss(vap, chan);
+				return 1;
+			}
+		}
+		/*
+		 * If nothing suitable was found decrement
+		 * the failure counts so entries will be
+		 * reconsidered the next time around.  We
+		 * really want to do this only for sta's
+		 * where we've previously had some success.
+		 */
+		sta_dec_fails(st);
+		st->st_newscan = 1;
+		return 0;			/* restart scan */
+	}
+	selbs = select_bss(ss, vap, IEEE80211_MSG_SCAN);
+	if (ss->ss_flags & IEEE80211_SCAN_NOJOIN)
+		return (selbs != NULL);
+	if (selbs == NULL)
+		goto notfound;
+	chan = selbs->base.se_chan;
+	if (selbs->se_flags & STA_DEMOTE11B)
+		chan = demote11b(vap, chan);
+	if (!ieee80211_sta_join(vap, chan, &selbs->base))
+		goto notfound;
+	return 1;				/* terminate scan */
+}
+
+static const struct ieee80211_scanner mesh_default = {
+	.scan_name		= "default",
+	.scan_attach		= sta_attach,
+	.scan_detach		= sta_detach,
+	.scan_start		= adhoc_start,
+	.scan_restart		= sta_restart,
+	.scan_cancel		= sta_cancel,
+	.scan_end		= mesh_pick_bss,
+	.scan_flush		= sta_flush,
+	.scan_pickchan		= adhoc_pick_channel,
+	.scan_add		= sta_add,
+	.scan_age		= adhoc_age,
+	.scan_iterate		= sta_iterate,
+	.scan_assoc_fail	= sta_assoc_fail,
+	.scan_assoc_success	= sta_assoc_success,
+};
+IEEE80211_SCANNER_ALG(mesh, IEEE80211_M_MBSS, mesh_default);
+#endif /* IEEE80211_SUPPORT_MESH */

sys/net80211/ieee80211_var.h

@@ -318,6 +318,8 @@ struct ieee80211com {
 
 struct ieee80211_aclator;
 struct ieee80211_tdma_state;
+struct ieee80211_mesh_state;
+struct ieee80211_hwmp_state;
 
 struct ieee80211vap {
 	struct ifmedia		iv_media;	/* interface media config */
@@ -432,6 +434,8 @@ struct ieee80211vap {
 	void			*iv_as;		/* private aclator state */
 
 	struct ieee80211_tdma_state *iv_tdma;	/* tdma state */
+	struct ieee80211_mesh_state *iv_mesh;	/* MBSS state */
+	struct ieee80211_hwmp_state *iv_hwmp;	/* HWMP state */
 
 	/* operate-mode detach hook */
 	void			(*iv_opdetach)(struct ieee80211vap *);
@@ -588,6 +592,7 @@ MALLOC_DECLARE(M_80211_VAP);
 #define	IEEE80211_C_SHPREAMBLE	0x00008000	/* CAPABILITY: short preamble */
 #define	IEEE80211_C_MONITOR	0x00010000	/* CAPABILITY: monitor mode */
 #define	IEEE80211_C_DFS		0x00020000	/* CAPABILITY: DFS/radar avail*/
+#define	IEEE80211_C_MBSS	0x00040000	/* CAPABILITY: MBSS available */
 /* 0x7c0000 available */
 #define	IEEE80211_C_WPA1	0x00800000	/* CAPABILITY: WPA1 avail */
 #define	IEEE80211_C_WPA2	0x01000000	/* CAPABILITY: WPA2 avail */
@@ -604,12 +609,12 @@ MALLOC_DECLARE(M_80211_VAP);
 #define	IEEE80211_C_OPMODE \
 	(IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \
 	 IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \
-	 IEEE80211_C_TDMA)
+	 IEEE80211_C_TDMA | IEEE80211_C_MBSS)
 
 #define	IEEE80211_C_BITS \
 	"\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \
 	"\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \
-	"\21MONITOR\22DFS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \
+	"\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \
 	"\37TXFRAG\40TDMA"
 
 /*
@@ -783,7 +788,7 @@ ieee80211_htchanflags(const struct ieee80211_channel *c)
  * program) and/or the msgs generated by net80211.  Messages are
  * broken into functional classes and can be controlled with the
  * wlandebug program.  Certain of these msg groups are for facilities
- * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1X).
+ * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1XSM).
  */
 #define	IEEE80211_MSG_11N	0x80000000	/* 11n mode debug */
 #define	IEEE80211_MSG_DEBUG	0x40000000	/* IFF_DEBUG equivalent */
@@ -799,7 +804,7 @@ ieee80211_htchanflags(const struct ieee80211_channel *c)
 #define	IEEE80211_MSG_OUTPUT	0x00100000	/* output handling */
 #define	IEEE80211_MSG_STATE	0x00080000	/* state machine */
 #define	IEEE80211_MSG_POWER	0x00040000	/* power save handling */
-#define	IEEE80211_MSG_DOT1X	0x00020000	/* 802.1x authenticator */
+#define	IEEE80211_MSG_HWMP	0x00020000	/* hybrid mesh protocol */
 #define	IEEE80211_MSG_DOT1XSM	0x00010000	/* 802.1x state machine */
 #define	IEEE80211_MSG_RADIUS	0x00008000	/* 802.1x radius client */
 #define	IEEE80211_MSG_RADDUMP	0x00004000	/* dump 802.1x radius packets */
@@ -821,7 +826,7 @@ ieee80211_htchanflags(const struct ieee80211_channel *c)
 
 #define	IEEE80211_MSG_BITS \
 	"\20\2TDMA\3IOCTL\4WDS\5ACTION\6RATECTL\7ROAM\10INACT\11DOTH\12SUPERG" \
-	"\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22DOT1X" \
+	"\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22HWMP" \
 	"\23POWER\24STATE\25OUTPUT\26SCAN\27AUTH\30ASSOC\31NODE\32ELEMID" \
 	"\33XRATE\34INPUT\35CRYPTO\36DUPMPKTS\37DEBUG\04011N"
 

sys/pc98/conf/GENERIC

@@ -223,6 +223,7 @@ device		xe		# Xircom pccard Ethernet
 #device		wlan		# 802.11 support
 #options 	IEEE80211_DEBUG	# enable debug msgs
 #options 	IEEE80211_AMPDU_AGE	# age frames in AMPDU reorder q's
+#options 	IEEE80211_SUPPORT_MESH	# enable 802.11s D3.0 support
 #device		wlan_wep	# 802.11 WEP support
 #device		wlan_ccmp	# 802.11 CCMP support
 #device		wlan_tkip	# 802.11 TKIP support

sys/sparc64/conf/GENERIC

@@ -201,6 +201,7 @@ device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
 device		wlan		# 802.11 support
 options 	IEEE80211_DEBUG	# enable debug msgs
 options 	IEEE80211_AMPDU_AGE	# age frames in AMPDU reorder q's
+options 	IEEE80211_SUPPORT_MESH	# enable 802.11s D3.0 support
 device		wlan_wep	# 802.11 WEP support
 device		wlan_ccmp	# 802.11 CCMP support
 device		wlan_tkip	# 802.11 TKIP support

tools/tools/nanobsd/gateworks/G2348

@@ -93,6 +93,7 @@ device          random          # Entropy device
 device		wlan		# 802.11 support
 options		IEEE80211_DEBUG		# enable debugging msgs
 options		IEEE80211_AMPDU_AGE	# age frames in AMPDU reorder q's
+options		IEEE80211_SUPPORT_MESH
 options		IEEE80211_SUPPORT_TDMA
 device		wlan_wep	# 802.11 WEP support
 device		wlan_ccmp	# 802.11 CCMP support

tools/tools/nanobsd/gateworks/G2358

@@ -94,6 +94,7 @@ device          random          # Entropy device
 device		wlan		# 802.11 support
 options		IEEE80211_DEBUG		# enable debugging msgs
 options		IEEE80211_AMPDU_AGE	# age frames in AMPDU reorder q's
+options		IEEE80211_SUPPORT_MESH
 options		IEEE80211_SUPPORT_TDMA
 device		wlan_wep	# 802.11 WEP support
 device		wlan_ccmp	# 802.11 CCMP support

tools/tools/net80211/scripts/config

@@ -49,6 +49,9 @@ test -z "$WPA_PASSPHRASE" && WPA_PASSPHRASE='I am not a geek'
 # default ssid for ap vaps
 test -z "$SSID"		&& SSID=freebsd-ap
 
+# default meshid for mesh vaps
+test -z "$MESHID"	&& MESHID=freebsd-mesh
+
 # directory to create files like hostapd.conf
 test -z "$TMPDIR"	&& TMPDIR=.
 

tools/tools/net80211/scripts/mesh/common

@@ -0,0 +1,13 @@
+#! /bin/sh
+#
+# Common setup.
+#
+# $FreeBSD$
+#
+PATH=../:.:$PATH
+. config
+. config.mesh
+
+WLAN=`ifconfig wlan create wlanmode mesh wlandev $WIRELESS`
+ifconfig $WLAN meshid $MESHID channel $CHANNEL mtu 1500
+wlandebug -i $WLAN mesh+hwmp+state+scan+assoc

tools/tools/net80211/scripts/mesh/config.mesh

@@ -0,0 +1,17 @@
+#
+# Common configuration settings for mesh test scripts.
+#
+# $FreeBSD$
+#
+
+NODE1_IP=10.0.1.100
+NODE2_IP=10.0.1.101
+NODE3_IP=10.0.1.102
+NODE4_IP=10.0.1.103
+NODE5_IP=10.0.1.104
+
+NODE1_MAC=00:0b:6b:2d:dc:d8
+NODE2_MAC=00:0b:6b:2d:db:ac
+NODE3_MAC=00:0b:6b:2d:dd:17
+NODE4_MAC=00:0b:6b:87:1c:f0
+NODE5_MAC=00:14:a5:33:33:a7

tools/tools/net80211/scripts/mesh/setup.simple

@@ -0,0 +1,13 @@
+#! /bin/sh
+#
+# Script for creating a simple Mesh Point.
+# Topology is fully connected if every node is a neighbor of each other.
+#
+# $FreeBSD$
+#
+PATH=../:.:$PATH
+. config
+. config.mesh
+
+. common
+ifconfig $WLAN up

tools/tools/net80211/scripts/mesh/topology.line

@@ -0,0 +1,38 @@
+#! /bin/sh
+#
+# Script for creating a mesh in line topology.
+#
+#  node1 <-> node2 <-> node3 <-> node4 <-> node5
+#
+# $FreeBSD$
+#
+PATH=../:.:$PATH
+. config
+. config.mesh
+
+. common
+ifconfig $WLAN mac:allow
+MAC=`ifconfig $WLAN | grep ether | awk '{ print $2 }'`
+case $MAC in
+	$NODE1_MAC)
+		ifconfig $WLAN inet $NODE1_IP
+		ifconfig $WLAN mac:add $NODE2_MAC
+		;;
+	$NODE2_MAC)
+		ifconfig $WLAN inet $NODE2_IP
+		ifconfig $WLAN mac:add $NODE1_MAC mac:add $NODE3_MAC 
+		;;
+	$NODE3_MAC)
+		ifconfig $WLAN inet $NODE3_IP
+		ifconfig $WLAN mac:add $NODE2_MAC mac:add $NODE4_MAC
+		;;
+	$NODE4_MAC)
+		ifconfig $WLAN inet $NODE4_IP
+		ifconfig $WLAN mac:add $NODE3_MAC mac:add $NODE5_MAC
+		;;
+	$NODE5_MAC)
+		ifconfig $WLAN inet $NODE5_IP
+		ifconfig $WLAN mac:add $NODE4_MAC
+		;;
+esac
+ifconfig $WLAN up

tools/tools/net80211/scripts/mesh/topology.ring

@@ -0,0 +1,40 @@
+#! /bin/sh
+#
+# Script for creating a mesh in ring topology.
+#
+#  node1 - node2 - node3 - node4 - node5
+#    ^                               |
+#     \-------------------------------
+#
+# $FreeBSD$
+#
+PATH=../:.:$PATH
+. config
+. config.mesh
+
+. common
+ifconfig $WLAN mac:allow
+MAC=`ifconfig $WLAN | grep ether | awk '{ print $2 }'`
+case $MAC in
+	$NODE1_MAC)
+		ifconfig $WLAN inet $NODE1_IP
+		ifconfig $WLAN mac:add $NODE2_MAC mac:add $NODE5_MAC
+		;;
+	$NODE2_MAC)
+		ifconfig $WLAN inet $NODE2_IP
+		ifconfig $WLAN mac:add $NODE1_MAC mac:add $NODE3_MAC 
+		;;
+	$NODE3_MAC)
+		ifconfig $WLAN inet $NODE3_IP
+		ifconfig $WLAN mac:add $NODE2_MAC mac:add $NODE4_MAC
+		;;
+	$NODE4_MAC)
+		ifconfig $WLAN inet $NODE4_IP
+		ifconfig $WLAN mac:add $NODE3_MAC mac:add $NODE5_MAC
+		;;
+	$NODE5_MAC)
+		ifconfig $WLAN inet $NODE5_IP
+		ifconfig $WLAN mac:add $NODE1_MAC mac:add $NODE4_MAC
+		;;
+esac
+ifconfig $WLAN up

tools/tools/net80211/scripts/mesh/topology.star

@@ -0,0 +1,38 @@
+#! /bin/sh
+#
+# Script for creating a mesh in star topology.
+# Node 3 will be the center.
+#
+# $FreeBSD$
+#
+PATH=../:.:$PATH
+. config
+. config.mesh
+
+. common
+ifconfig $WLAN mac:allow
+MAC=`ifconfig $WLAN | grep ether | awk '{ print $2 }'`
+case $MAC in
+	$NODE1_MAC)
+		ifconfig $WLAN inet $NODE1_IP
+		ifconfig $WLAN mac:add $NODE3_MAC
+		;;
+	$NODE2_MAC)
+		ifconfig $WLAN inet $NODE2_IP
+		ifconfig $WLAN mac:add $NODE3_MAC
+		;;
+	$NODE3_MAC)
+		ifconfig $WLAN inet $NODE3_IP
+		ifconfig $WLAN mac:add $NODE1_MAC mac:add $NODE2_MAC mac:add \
+		    $NODE4_MAC mac:add $NODE5_MAC
+		;;
+	$NODE4_MAC)
+		ifconfig $WLAN inet $NODE4_IP
+		ifconfig $WLAN mac:add $NODE3_MAC
+		;;
+	$NODE5_MAC)
+		ifconfig $WLAN inet $NODE5_IP
+		ifconfig $WLAN mac:add $NODE3_MAC
+		;;
+esac
+ifconfig $WLAN up

tools/tools/net80211/scripts/mesh/topology.tree

@@ -0,0 +1,47 @@
+#! /bin/sh
+#
+# Script for creating a mesh in tree (hirearchical) topology.
+#
+#       node1
+#         ^
+#         |
+#        / \
+#       v   v
+#    node2  node3
+#      ^      ^
+#      |      |
+#      v      v
+#    node4  node5
+#
+# $FreeBSD$
+#
+PATH=../:.:$PATH
+. config
+. config.mesh
+
+. common
+ifconfig $WLAN mac:allow
+MAC=`ifconfig $WLAN | grep ether | awk '{ print $2 }'`
+case $MAC in
+	$NODE1_MAC)
+		ifconfig $WLAN inet $NODE1_IP
+		ifconfig $WLAN mac:add $NODE2_MAC mac:add $NODE3_MAC
+		;;
+	$NODE2_MAC)
+		ifconfig $WLAN inet $NODE2_IP
+		ifconfig $WLAN mac:add $NODE1_MAC mac:add $NODE4_MAC
+		;;
+	$NODE3_MAC)
+		ifconfig $WLAN inet $NODE3_IP
+		ifconfig $WLAN mac:add $NODE1_MAC mac:add $NODE5_MAC
+		;;
+	$NODE4_MAC)
+		ifconfig $WLAN inet $NODE4_IP
+		ifconfig $WLAN mac:add $NODE2_MAC
+		;;
+	$NODE5_MAC)
+		ifconfig $WLAN inet $NODE5_IP
+		ifconfig $WLAN mac:add $NODE3_MAC
+		;;
+esac
+ifconfig $WLAN up

tools/tools/net80211/wlanstats/wlanstats.c

@@ -322,7 +322,27 @@ static const struct fmt wlanstats[] = {
 	{ 4,  "ht_downgrade",	"ht_downgrade",	"HT station downgraded to legacy operation" },
 #define	S_HT_ASSOC_NORATE	AFTER(S_HT_ASSOC_DOWNGRADE)
 	{ 4,  "ht_norate",	"ht_norate",	"HT station rejected because of HT rate set" },
-#define	S_INPUT			AFTER(S_HT_ASSOC_NORATE)
+#define	S_MESH_WRONGMESH	AFTER(S_HT_ASSOC_NORATE)
+	{ 4,  "mesh_wrong",	"mesh_wrong",	"frame discarded because sender not a mesh sta" },
+#define	S_MESH_NOLINK		AFTER(S_MESH_WRONGMESH)
+	{ 4,  "mesh_nolink",	"mesh_nolink",	"frame discarded because link not established" },
+#define	S_MESH_FWD_TTL		AFTER(S_MESH_NOLINK)
+	{ 4,  "mesh_fwd_ttl",	"mesh_fwd_ttl",	"frame not forwarded because TTL zero" },
+#define	S_MESH_FWD_NOBUF	AFTER(S_MESH_FWD_TTL)
+	{ 4,  "mesh_fwd_nobuf",	"mesh_fwd_nobuf",	"frame not forwarded because mbuf could not be allocated" },
+#define	S_MESH_FWD_TOOSHORT	AFTER(S_MESH_FWD_NOBUF)
+	{ 4,  "mesh_fwd_tooshort",	"mesh_fwd_tooshort",	"frame not forwarded because too short to have 802.11 header" },
+#define	S_MESH_FWD_DISABLED	AFTER(S_MESH_FWD_TOOSHORT)
+	{ 4,  "mesh_fwd_disabled",	"mesh_fwd_disabled",	"frame not forwarded because administratively disabled" },
+#define	S_MESH_FWD_NOPATH	AFTER(S_MESH_FWD_DISABLED)
+	{ 4,  "mesh_fwd_nopath",	"mesh_fwd_nopath",	"frame not forwarded because no path found to destination" },
+#define	S_HWMP_WRONGSEQ		AFTER(S_MESH_FWD_NOPATH)
+	{ 4,  "hwmp_wrongseq",	"hwmp_wrongseq",	"frame discarded because mesh sequence number is invalid" },
+#define	S_HWMP_ROOTREQS		AFTER(S_HWMP_WRONGSEQ)
+	{ 4,  "hwmp_rootreqs",	"hwmp_rootreqs",	"root PREQ frames sent" },
+#define	S_HWMP_ROOTANN		AFTER(S_HWMP_ROOTREQS)
+	{ 4,  "hwmp_rootann",	"hwmp_rootann",	"root RANN frames received" },
+#define	S_INPUT			AFTER(S_HWMP_ROOTANN)
 	{ 8,	"input",	"input",	"total data frames received" },
 #define	S_RX_UCAST		AFTER(S_INPUT)
 	{ 8,	"rx_ucast",	"rx_ucast",	"unicast data frames received" },
@@ -766,6 +786,16 @@ wlan_get_curstat(struct statfoo *sf, int s, char b[], size_t bs)
 	case S_HT_ASSOC_NOHTCAP:STAT(ht_assoc_nohtcap);
 	case S_HT_ASSOC_DOWNGRADE:STAT(ht_assoc_downgrade);
 	case S_HT_ASSOC_NORATE:	STAT(ht_assoc_norate);
+	case S_MESH_WRONGMESH:	STAT(mesh_wrongmesh);
+	case S_MESH_NOLINK:	STAT(mesh_nolink);
+	case S_MESH_FWD_TTL:	STAT(mesh_fwd_ttl);
+	case S_MESH_FWD_NOBUF:	STAT(mesh_fwd_nobuf);
+	case S_MESH_FWD_TOOSHORT: STAT(mesh_fwd_tooshort);
+	case S_MESH_FWD_DISABLED: STAT(mesh_fwd_disabled);
+	case S_MESH_FWD_NOPATH:	STAT(mesh_fwd_nopath);
+	case S_HWMP_WRONGSEQ:	STAT(hwmp_wrongseq);
+	case S_HWMP_ROOTREQS:	STAT(hwmp_rootreqs);
+	case S_HWMP_ROOTANN:	STAT(hwmp_rootrann);
 	case S_INPUT:		NSTAT(rx_data);
 	case S_OUTPUT:		NSTAT(tx_data);
 	case S_RX_UCAST:	NSTAT(rx_ucast);
@@ -910,6 +940,16 @@ wlan_get_totstat(struct statfoo *sf, int s, char b[], size_t bs)
 	case S_HT_ASSOC_NOHTCAP:STAT(ht_assoc_nohtcap);
 	case S_HT_ASSOC_DOWNGRADE:STAT(ht_assoc_downgrade);
 	case S_HT_ASSOC_NORATE:	STAT(ht_assoc_norate);
+	case S_MESH_WRONGMESH:	STAT(mesh_wrongmesh);
+	case S_MESH_NOLINK:	STAT(mesh_nolink);
+	case S_MESH_FWD_TTL:	STAT(mesh_fwd_ttl);
+	case S_MESH_FWD_NOBUF:	STAT(mesh_fwd_nobuf);
+	case S_MESH_FWD_TOOSHORT: STAT(mesh_fwd_tooshort);
+	case S_MESH_FWD_DISABLED: STAT(mesh_fwd_disabled);
+	case S_MESH_FWD_NOPATH:	STAT(mesh_fwd_nopath);
+	case S_HWMP_WRONGSEQ:	STAT(hwmp_wrongseq);
+	case S_HWMP_ROOTREQS:	STAT(hwmp_rootreqs);
+	case S_HWMP_ROOTANN:	STAT(hwmp_rootrann);
 	case S_INPUT:		NSTAT(rx_data);
 	case S_OUTPUT:		NSTAT(tx_data);
 	case S_RX_UCAST:	NSTAT(rx_ucast);