Update to include info about the 1000baseTX adapters.
This commit is contained in:
parent
bd80fa2c7f
commit
a83b508eb4
|
@ -36,15 +36,20 @@
|
||||||
.Sh NAME
|
.Sh NAME
|
||||||
.Nm sk
|
.Nm sk
|
||||||
.Nd
|
.Nd
|
||||||
SysKonnect SK-984x PCI gigabit ethernet adapter driver
|
SysKonnect SK-984x and SK-982x PCI gigabit ethernet adapter driver
|
||||||
.Sh SYNOPSIS
|
.Sh SYNOPSIS
|
||||||
.Cd "device sk"
|
.Cd "device sk"
|
||||||
.Sh DESCRIPTION
|
.Sh DESCRIPTION
|
||||||
The
|
The
|
||||||
.Nm
|
.Nm
|
||||||
driver provides support for the SysKonnect SK-984x series PCI
|
driver provides support for the SysKonnect SK-984x and SK-982x series PCI
|
||||||
gigabit ethernet adapters, including the following:
|
gigabit ethernet adapters, including the following:
|
||||||
.Bl -bullet -offset indent
|
.Pp
|
||||||
|
.Bl -bullet -offset indent -compact
|
||||||
|
.It
|
||||||
|
SK-9821 SK-NET GE-T single port, 1000baseT adapter
|
||||||
|
.It
|
||||||
|
SK-9822 SK-NET GE-T dual port, 1000baseT adapter
|
||||||
.It
|
.It
|
||||||
SK-9841 SK-NET GE-LX single port, single mode fiber adapter
|
SK-9841 SK-NET GE-LX single port, single mode fiber adapter
|
||||||
.It
|
.It
|
||||||
|
@ -64,6 +69,10 @@ and arbitration.
|
||||||
The GEnesis can control up to two XMACs simultaneously,
|
The GEnesis can control up to two XMACs simultaneously,
|
||||||
allowing dual-port NIC configurations.
|
allowing dual-port NIC configurations.
|
||||||
.Pp
|
.Pp
|
||||||
|
The SK-982x 1000baseT adapters also include a Broadcom BCM5400 1000baseTX
|
||||||
|
PHY which is used in place of the XMAC's internal PHY. The Broadcom PHY
|
||||||
|
is connected to the XMAC via its GMII port.
|
||||||
|
.Pp
|
||||||
The
|
The
|
||||||
.Nm
|
.Nm
|
||||||
driver configures dual port SysKonnect adapters such that each XMAC
|
driver configures dual port SysKonnect adapters such that each XMAC
|
||||||
|
@ -97,6 +106,14 @@ The user can manually override
|
||||||
the autoselected mode by adding media options to the
|
the autoselected mode by adding media options to the
|
||||||
.Pa /etc/rc.conf
|
.Pa /etc/rc.conf
|
||||||
file.
|
file.
|
||||||
|
.It 1000baseTX
|
||||||
|
Set 1000baseTX operation over twisted pair. This is only available
|
||||||
|
for SK-982x series adapters with 1000baseT ports.
|
||||||
|
Both
|
||||||
|
.Ar full-duplex
|
||||||
|
and
|
||||||
|
.Ar half-duplex
|
||||||
|
modes are supported.
|
||||||
.It 1000baseSX
|
.It 1000baseSX
|
||||||
Set 1000Mbps (gigabit ethernet) operation.
|
Set 1000Mbps (gigabit ethernet) operation.
|
||||||
Both
|
Both
|
||||||
|
@ -117,6 +134,25 @@ Force full duplex operation
|
||||||
Force half duplex operation.
|
Force half duplex operation.
|
||||||
.El
|
.El
|
||||||
.Pp
|
.Pp
|
||||||
|
The
|
||||||
|
.Nm
|
||||||
|
driver also supports one special link option for 1000baseTX cards:
|
||||||
|
.Pp
|
||||||
|
.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
|
||||||
|
.It link0
|
||||||
|
With 1000baseTX cards, establishing a link between two ports requires
|
||||||
|
that one port be configured as a master and the other a slave. With
|
||||||
|
autonegotiation, the master/slave settings will be chosen automatically.
|
||||||
|
However when manually selecting the link state, it is necessary to
|
||||||
|
force one side of the link to be a master and the other a slave. The
|
||||||
|
.Nm
|
||||||
|
driver configures the ports as slaves by default. Setting the
|
||||||
|
.Ar link0
|
||||||
|
flag with
|
||||||
|
.Xr ifconfig 8
|
||||||
|
will set a port as a master instead.
|
||||||
|
.El
|
||||||
|
.Pp
|
||||||
For more information on configuring this device, see
|
For more information on configuring this device, see
|
||||||
.Xr ifconfig 8 .
|
.Xr ifconfig 8 .
|
||||||
.Sh DIAGNOSTICS
|
.Sh DIAGNOSTICS
|
||||||
|
|
Loading…
Reference in New Issue