Commit Graph

141 Commits

Author SHA1 Message Date
Jordan K. Hubbard f9e0c4246c Add entries for Comtrol Rocketport driver.
Submitted by:	Amir Farah <amir@comtrol.com>
1997-08-28 12:14:14 +00:00
John-Mark Gurney 94021764b0 add a bktrX target (for Bt848 based cards) 1997-05-11 00:34:36 +00:00
Daniel O'Callaghan 8a96b3a58d Update MAKEDEV to handle lots of tun devices, consistent with the tun device
selection code in usr.sbin/ppp/os.c (tun0-tun127, rather than tuna and tunb).
Also, make it make all devices up to and including the requested one.
1997-03-10 02:10:58 +00:00
Joerg Wunsch 7030cda054 Now that we can read from a worm device, handle their permissions as
we do for other disk devices, too.
1997-03-05 14:04:00 +00:00
Bruce Evans 01645cb5c9 Merged Cortex frame grabber entry from 2.2. 1997-03-03 16:13:35 +00:00
Peter Wemm 79403fe300 Revert $FreeBSD$ to $Id$ 1997-02-23 09:21:14 +00:00
Joerg Wunsch 94e7483c11 Add worm(4)'s bdev entry. 1997-02-06 22:23:26 +00:00
Bruce Evans def920e3ec Use shifts instead of multiplications and `|' instead of `+' to simplify
dkminor().  Use $((1 << 29)) instead of a mysterious decimal number for
$scisctl.  Use dkminor() instead of repeating part of it for special cases.
Shortened some long lines.
1997-01-27 06:24:10 +00:00
David Greenman ac9e2a2511 Change to use some unused bits in the 'type' field to extend the unit field
to 9 bits (512 units) for disk devices.
1997-01-24 22:00:35 +00:00
Jordan K. Hubbard 1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Nate Williams 6cebb6a689 Added apm and card[01] devices to all target.
Suggested by:	bde
1997-01-13 17:37:20 +00:00
Joerg Wunsch 513a014830 While being here, also create all the gsc device nodes as described in
the gsc(4) man page, and allow for more than one unit number.
1996-12-30 20:51:36 +00:00
Jordan K. Hubbard 0b3870cb60 Close PR#2198:
I've added an installation from optical disk drive facility.
	This enables FreeBSD to be installed from an optical disk, which
	may be formatted in "super floppy" style or sliced into MSDOS-FS
	and UFS partitions.

	Note:  ncr.c should be reviewed by Stefan Esser <se@freebsd.org>
	and cd.c by Joerg Wunsch <joerg@freebsd.org> before bringing this
	into 2.2.

Submitted-By: Shunsuke Akiyama <akiyama@kme.mei.co.jp>
1996-12-13 07:55:14 +00:00
Andreas Klemm fda1c610e8 Added $PATH to the end of PATH. Otherwise the command 'expr' can't be
found by the shell when running MAKEDEV from the fixit floppy environment.
1996-11-14 14:28:26 +00:00
Bruce Evans ce5636f791 Fixed cualc and cualD minor numbers which I broke in the previous commit. 1996-11-01 08:49:13 +00:00
Bruce Evans fab5b1c43d Restored order of cuac above ttyc.
Fixed some style bugs for cua* and tty*.

Removed superfluous chmod for consolectl.

FIxed a tiny security bug for perfmon and changed the style for
perfmon to match the style of the non-std devices.
1996-10-25 15:01:33 +00:00
Stefan Eßer d018c1a988 Add character device (78,0): pci
Submitted by:	wollman
1996-10-22 20:41:03 +00:00
David Greenman 4364e32501 Changed ttyc? and cuac? specifications to support multiple controllers.
A "MAKEDEV ttyc0" now creates 32 units for controller 0, ttyc1 for
controller 1, etc..
1996-10-13 01:12:01 +00:00
Søren Schmidt a41cbc45be Fix for the problem that moused hangs if it is started from /etc/rc
Introduces the /dev/consolectl device for controlling various
console related things (given syscons is used).
1996-09-09 18:47:47 +00:00
Andrey A. Chernov d71651da35 Use the same perm/owner for sysmouse as for others mouse devices 1996-09-09 00:02:44 +00:00
Andrey A. Chernov 814c1905ad Make sysmouse device for syscons 1996-09-08 23:56:27 +00:00
Wolfram Schneider c4a87a6a59 update comment for tun*
add comment for snp*
1996-07-02 23:11:06 +00:00
Andrey A. Chernov 62d543821c IDE cd fixes:
wcd?a is missing
wrong partition number was used for wcd?c
1996-06-07 15:47:15 +00:00
Satoshi Asami a388db6b9e Bring in ccd support.
Entry to create ccd devices.
1996-05-03 05:37:34 +00:00
Jordan K. Hubbard 582af1726d Add wcd0 to `all' target. The fate of the IDE CDROM support in 2.2
is becoming clearer.. :-)
1996-05-02 09:15:57 +00:00
Garrett Wollman a98d68cf25 Provide for creation of /dev/perfmon. 1996-03-26 21:04:54 +00:00
Jordan K. Hubbard 9ab75783da Fix Nate's spamming of this file - every backquote needs a matching one.. :-) 1996-03-19 03:48:53 +00:00
Nate Williams 3b9fa99df2 Added some comments regarding the apm device, and added support to
create the PC-CARD devices.

Note: The APM character special device is named /dev/apm and not apm0 as
was prvioiusly since only one APM device can exist in a system at a time
according to the the APM specifications.
1996-03-18 20:28:27 +00:00
Paul Traina 869fc587ed Add support for Connectix QuickCam(tm) 1996-02-02 19:25:24 +00:00
Mike Pritchard 440cac3e51 Another round of spelling fixes. 1996-01-31 15:03:18 +00:00
Bruce Evans 6a188c276a Use umask disk_umask=037 for all (writable) disks. Use umask
tape_umask=017 for all tapes.  This has a significant effect only
for ft and st (they were created with the wrong umask 002 and then
chmod'ed to mode 640; now they are created with mode 660).

Chmod the st control devices (mode 3) to 600.  These need to be
more secure than the st i/o devices, but were less secure.

Use the default umask of 077 for joy0.  002 gave mode 664, which
is insecure.

Use umask 037 for ch*.  Cosmetic.

Removed redundant chmod's.

Sorted case lists for disks.
1996-01-28 19:10:37 +00:00
Joerg Wunsch 0ac727259c Restrict /dev/io perms to 0600. 1995-12-31 09:30:30 +00:00
Mark Murray 7d2bdadb5b Move the creation of the *random devices to the same "target" as the
rest of the memory group - std. Also correct the permissions so as not
to force a security hole. If /dev/*random have the permission 640 and
ownership bin.kmem, it forces applications that need random numbers
to be at least SGID. Picture the scene of a SGID PGP being able to
read /dev/kmem!
1995-12-03 17:26:21 +00:00
Bruce Evans 2226a9e686 Add random and urandom. 1995-10-29 15:52:31 +00:00
Bruce Evans d416cc848a Update Digiboard entries.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-10-17 16:26:54 +00:00
Peter Wemm 4e3c5cb5f3 Update the /dev naming for the Specialix driver.. I've changed it to do
the same sort of thing as the Digiboard driver (ttyD*), as creating 96
/dev entries one by one was very painful.
1995-09-22 20:42:11 +00:00
Andreas Schulz 41a9a02d31 Add a description for the wcd* devices to the Disks section. 1995-09-16 23:15:01 +00:00
Jordan K. Hubbard f8bf743c02 Add entries for Digiboard serial card and document Specialix driver
entries while I'm at it.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su> + mods by jkh
1995-09-03 20:40:16 +00:00
Joerg Wunsch d96ce489cc Install the hooks for the Japanese `od' driver (aka. MOD).
Submitted by:	akiyama@kme.mei.co.jp (Shunsuke Akiyama)
1995-08-19 15:50:56 +00:00
Jordan K. Hubbard 736267d692 Device entry for IDE CDROM driver.
Submitted by:	Serge Vakulenko <vak@cronyx.ru>
1995-08-18 11:29:05 +00:00
Peter Wemm 150e023bc9 Add simple hooks to create /dev entries for the Specialix driver
Reviewed by:
Submitted by:
Obtained from:
1995-08-13 22:05:51 +00:00
Jordan K. Hubbard 162efbb15c Add device support for the Matrox Meteor.
Submitted by:	james
1995-08-01 13:15:52 +00:00
Jordan K. Hubbard 55cc556c42 Fix the mknod for spigot. 1995-07-30 12:56:26 +00:00
Bruce Evans d10b6048eb Remove /dev/ from socksys link again.
Move `Individual slices' case earlier so that it can be used to handle
sliced floppies.

Remove superfluous `chmod 600's.

Fix formatting of device list.

Don't group setting of umasks with setting of units.

Remove superfluous trailing semicolons.
1995-07-29 05:25:08 +00:00
Jordan K. Hubbard b366737bf0 New sound device names.
Reviewed by:	hasty & lowe
Submitted by:	pst
1995-07-29 00:40:40 +00:00
Jordan K. Hubbard 7dc962a0af Part of Vincenzo Capuano's changes to xntpd to support the
Boeder DCF77 Receiver.
Submitted by:	Vincenzo Capuano <VCAPUANO@VMPROFS.ESOC.ESA.DE>
1995-07-21 13:02:13 +00:00
Jordan K. Hubbard 2c3b28f96d Add tun0 to the all rule. 1995-05-18 10:51:03 +00:00
Rodney W. Grimes f8a6f4a227 Remove all /dev/'s from device names, they should all be relative
to /dev.  Putting absolute paths in here breaks the make release
process, and screws up testing of this script in other directories.

Submitted by:	bde
1995-05-15 09:44:10 +00:00
Gary Palmer 64cecefe43 Clean up the matcd entry so it deletes the *matcdl* entries before trying
to create new ones.

Reviewed by:	davidg, rgrimes
1995-05-15 06:55:18 +00:00
Jordan K. Hubbard 7b094c1c1d The lites web page has moved.
Submitted by:	rich
1995-05-11 20:39:36 +00:00