550f8550ec
Replace all remaining instances of `i386/include' by `machine' and fix
...
nearby #include inconsistencies.
1995-02-26 05:14:53 +00:00
781d9d4623
Keep PCI_CONF_MODE in a safe place for later reference, if #defined.
...
Reviewed by: se
Submitted by: seb@erix.ericsson.se (Sebastian Strollo)
1995-02-25 17:51:18 +00:00
6f22585dd4
Initialisation of interrupt masks changed.
...
Reviewed by: se
Submitted by: wolf (Wolfgang Stanglmeier)
1995-02-09 20:16:19 +00:00
ac19f91802
Reviewed by: se
...
Submitted by: wolf (Wolfgang Stanglmeier)
New ISA dependend file for PCI bus support.
Replaces sys/i386/pci/pcibios.c.
1995-02-01 23:06:58 +00:00
d7be8cb6e9
Change the string returned in the aic7870 motherboard probe case. Change
...
#define to a more appropriate name.
1995-01-22 00:47:50 +00:00
344e176820
Add $Id. Recognize motherboard aic7870 based controllers.
1995-01-16 16:31:57 +00:00
451ab98ff3
Add in aic7770.c (EISA/VL Adaptors) and aic7870.c (PCI adaptor) dependancies
...
for the ahc driver.
1995-01-13 02:23:27 +00:00
cde24835d3
Submitted by: Mikael Hybsch <micke@dynas.se>
...
Add support for NCR 53c815 PCI SCSI chip.
1995-01-12 14:01:13 +00:00
edd5a4af47
Restore my changes in rev 1.11 that Garrett killed in his commit.
1994-12-22 23:42:25 +00:00
dd2e410221
Move ARP interface initialization into if_ether.c:arp_ifinit().
1994-12-22 21:56:22 +00:00
9a3c07de07
Add support for -v option passed to boot loader (bootverbose).
...
Reviewed by:
Submitted by:
Obtained from:
1994-12-22 21:20:39 +00:00
2b4e0927f6
Unbogify the size being passed to bzero when clearing struct softc.
1994-12-18 14:40:26 +00:00
d33095d2b2
The physical memory allocated for input DMA must be contiguous. The driver
...
worked in the past only because of good fortune. Anyway, use the contig alloc
routine I wrote awhile ago (vm_page_alloc_contig) for the sound code to do
this allocation. Also, specify read+write on the permissions to pmap_enter().
Specifying just read can have unexpected consquences.
1994-12-11 01:45:41 +00:00
89384ace85
Fix bug I introduced that broke BPF support. Caused by a byte order problem
...
in an if () expression. Problem fixed by removing the test for ETHERTYPE_*
before passing packet to higher layers.
1994-11-30 12:08:23 +00:00
99e7cabca3
Really deactivated the code that puts scsi stats into dk0.
...
This should have been disabled for some time, but I had screwed up ...
This made spurious values appear for fd0 in systat, when there was
NCR SCSI activity.
1994-11-28 23:18:46 +00:00
307d80be7a
Moved conversion of ether_type to host byte order out of ethernet drivers
...
and into ether_input(). It was silly to have bpf want this one way and
ether_input want it another way. Ripped out trailer support from the few
remaining drivers that still had it.
1994-11-24 14:29:38 +00:00
b83f4f55d8
Bunch of fixes from Matt Thomas:
...
1) make #includes correct
2) fix bugs in address check macros
3) fixed bugs in, and enabled, recopy if heavily fragmented code
4) moved call to bpf tap to be before enqueing packet (probably gratuitous)
5) fixed bug that caused "abnormal interrupt" at boot time/first use
6) added support for reading Zynx address ROM
7) fixed bug that caused broadcasts to not work shortly after booting (only
manifested if not using multicast - e.g. not in FreeBSD 2.0)
8) fixed spelling errors in comments
Submitted by: Matt Thomas
1994-11-22 09:47:31 +00:00
07d0d0fc9c
Added support for SIOCSIFMTU ioctl. Fixed bug that caused panic at boot time
...
related to interrupts being enabled before the device attach. The interrupt
should be mapped *after* the device attach.
1994-11-13 12:39:38 +00:00
6e876d0d60
Added missing call to bpf on the transmit side. Nuked revision log.
1994-11-10 02:56:48 +00:00
e754e0f30f
Fixed bug that somehow made it into here: the ifp must be stored in the
...
mbuf header for received packets. Minor performance optimizations. Removed
#ifdef MULTICAST's as this isn't optional in our kernel.
1994-11-09 15:12:44 +00:00
66da596420
Submitted by:
...
Added hooks for "lsdev" ...
PCI devices should need no individual code for lsdev.
1994-11-02 23:47:14 +00:00
339b10f15d
Submitted by: Paul F. Werkowski
...
Add a quirk line for the SONY SDT-5000 like it is done for the WangDAT tapes.
1994-10-30 00:30:27 +00:00
904c1a11ac
Make this documentation more sane in the context of 2.0.
1994-10-29 13:13:40 +00:00
c3739b59ec
Change some compile time defaults, which may be overridden from the
...
kernel config file by options lines.
Now the default settings are FAST SCSI, max. 4 TAGS, WIDE transfers,
if supported by the hardware ...
1994-10-27 20:12:46 +00:00
422cdd6132
Modified fifth parameter (imask) to register_intr() according to
...
new definition of that function.
1994-10-25 23:09:08 +00:00
c6f2eb5edb
Added decoding of chipset registers for Pentium 90/100 CPUs.
1994-10-25 18:45:19 +00:00
161e7c8d87
#ifdef'ed the verbose probe messages. Only until I find a good way of
...
making it run-time selectable, then it will be back (at will).
1994-10-17 21:11:31 +00:00
65005ce25c
Fixed typo and message format change to avoid line wrapping.
1994-10-15 23:27:39 +00:00
6055e04518
Submitted by: "Randall W. Dean" <rwd@osf.org>
...
Fixed typo in initialisation of DMODE:
PCI burst length now really 16 transfers as advertised ...
1994-10-14 23:59:36 +00:00
55f018a694
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
removed PCI mapping call from vga_attach() in pcisupport.c.
1994-10-13 01:12:31 +00:00
152f2ff316
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Debugging option changed, getirr() removed.
1994-10-13 01:11:13 +00:00
140e168d9b
Submitted by: Matt Thomas <thomas@lkg.dec.com>
...
Preliminary FAST Ethernet support added (DEC21140).
1994-10-12 11:19:36 +00:00
157823e855
Temporary disable scanning for VGA cards, was causing problems.
1994-10-12 11:06:49 +00:00
5044407419
Submitted by: Bruce Evans <bde@zeta.org.au>
...
Function getirr() could clobber interrupt controller state.
1994-10-12 04:17:24 +00:00
468010e809
Small corrections:
...
pci config line now without irq
boot message changed
1994-10-12 02:41:21 +00:00
65772aee92
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Bug fixed, that caused system hang on first interrupt on some motherboards.
New version of PCI bus configuration code, now supports dynamic interrupt
configuration (using BIOS supplied values).
NCR SCSI and DEC Ethernet driver patched to use this feature.
*** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
86e0c19b6c
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Name change: pci_intel.c -> pcisupport.c
1994-10-12 02:27:08 +00:00
8870af7f56
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Files merged and name change: pci_device.h + pcibios.h -> pcireg.h
1994-10-12 02:25:03 +00:00
22d3e9a6d7
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Name change: ncrstat -> ncrcontrol
1994-10-12 02:23:14 +00:00
a7d314a58f
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Name change: ncr_reg.h -> ncrreg.h
1994-10-12 02:21:56 +00:00
24161ef88f
Add Matt Thomas's DC21040 PCI Ethernet driver. (This is turning out
...
to be quite a popular chip, so expect to see a number of products
based on it.)
1994-10-01 20:16:47 +00:00
01b3600a69
Correct `de' device ID.
...
Add pd_npresent field for future loadable PCI drivers.
1994-10-01 19:47:33 +00:00
e902866cf7
Correct DEC -> Digital Equipment Corporation.
1994-10-01 00:18:53 +00:00
799e5f277f
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
New version with improved support for WIDE SCSI using the NCR 53c825.
Test for buggy secondary cache implementations.
PCI Int to IRQ mapping now specified per slot.
1994-09-28 16:34:13 +00:00
1ee6b373eb
Add missing closing comment. I have taken the non-knf format
...
of this code up with the authors and they are looking at converting it,
but until then leave the format alone.
1994-09-24 02:42:11 +00:00
df9ab3049d
Removed inclusion of pio.h and cpufunc.h (cpufunc.h is included from
...
systm.h). Merged functionality of pio.h into cpufunc.h. Cleaned up some
related code.
1994-09-16 13:33:56 +00:00
4a078e7d90
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + <se>
...
Improved bus probing, symbolic names for registers..
Chip set parameters get dumped for intel PCI chip sets
(82424+82434 only, for now).
1994-09-16 00:33:29 +00:00
45271d26ef
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
New version with support for the NCR 53c810 and 53c825.
Support for WIDE SCSI devices.
1994-09-16 00:22:32 +00:00
f86233fe54
Added a bit of missing functionality to make this work correctly on a
...
wider variety of systems. Include the deivers from pci_intel.c in
pci_config.c (I hope this is what was intended; my system works ok).
Use pmap_mapdev(). Automatically map any large linear frame buffers
or whatnot in VGA-style devices which ordinarily would not have their
own drivers, and don't call not_supported() for them. (This shuts up
complaints about my Matrox card.) Include the beginnings of what could
eventually become dynamically-loadable PCI devices. Allow for the
possibility of PCI devices simply providing a PCI veneer over an existing
ISA device, and shut up about them, too.
Make autoconfiguration text conform more to the style of other supported
buses.
1994-09-14 01:34:51 +00:00
9c1cc29eec
Reviewed by: Stefan Esser <se>
...
Submitted by:
Current development version of PCI and NCR 53c810 driver.
Not yet tested under FreeBSD-2.0 !
1994-09-06 22:39:12 +00:00
Bruce Evans
Stefan Eßer
Justin T. Gibbs
David Greenman
Garrett Wollman
Andreas Schulz
Jordan K. Hubbard
Poul-Henning Kamp
Rodney W. Grimes