The mbuf and mcluster free lists now each "own" a condition variable,
m_starved.
- Clean up minor indentention issues in sys/mbuf.h caused by previous
commit.
Don't use atomic operations for the stats updating, instead protect
the counts with the mbuf mutex. Most twiddling of the stats was
done right before or after releasing a mutex. By doing this we
reduce the number of locked ops needed as well as allow a sysctl
to gain a consitant view of the entire stats structure.
In the future...
This will allow us to chain common mbuf operations that would
normally need to aquire/release 2 or 3 of the locks to build an
mbuf with a cluster or external data attached into a single op
requiring only one lock.
Simplify the per-cpu locks that are planned.
There's also some if (1) code that should check if the "how"
operation specifies blocking/non-blocking behavior, we _could_ make
it so that we hold onto the mutex through calls into kmem_alloc
when non-blocking requests are made, but for safety reasons we
currently drop and reaquire the mutex around the calls.
Also, note that calling kmem_alloc is rare and only happens during
a shortage so drop/re-getting the mutex will not be a common
occurance.
Remove some #define's that seemed to obfuscate the code to me.
Remove an extranious comment.
Remove an XXX, including mutex.h isn't a crime.
Reviewed by: bmilekic
avoid silly lock contention on sched_lock since in 2 out of the 3 places
that we call stop(), we get sched_lock right after calling it and we were
locking sched_lock inside of stop() anyways.
SIGCHLD to our parent process. Otherwise, we could block while obtaining
the process lock for our parent process and switch out while we were
in SSTOP. Even worse, when we try to resume from the mutex being blocked
on our p_stat will be SRUN, not SSTOP.
- Fix a comment above stop() to indicate that it requires that the proc lock
be held, not a proctree lock.
Reported by: markm
Sleuthing by: jake
operations on file descriptors, which complement the existing set of
calls, extattr_{delete,get,set}_file() which act on paths. In doing
so, restructure the system call implementation such that the two sets
of functions share most of the relevant code, rather than duplicating
it. This pushes the vnode locking into the shared code, but keeps
the copying in of some arguments in the system call code. Allowing
access via file descriptors reduces the opportunity for race
conditions when managing extended attributes.
Obtained from: TrustedBSD Project
ps_showallprocs such that if superuser is present to override process
hiding, the search falls through [to success]. When additional
restrictions are placed on process visibility, such as MAC, new clauses
will be placed above the return(0).
Obtained from: TrustedBSD Project
two subject ucreds. Unlike p_cansee(), u_cansee() doesn't have
process lock requirements, only valid ucred reference requirements,
so is prefered as process locking improves. For now, back p_cansee()
into u_cansee(), but eventually p_cansee() will go away.
Reviewed by: jhb, tmm
Obtained from: TrustedBSD Project
locks were held, we could be preempted and switch CPU's in between the time
that we set a variable to the list of spin locks on our CPU and the time
that we checked that variable to ensure no spinlocks were held while
grabbing a sleep lock. Losing the race resulted in checking some other
CPU's spin lock list and bogusly panicing.
- Introduce lock classes and lock objects. Each lock class specifies a
name and set of flags (or properties) shared by all locks of a given
type. Currently there are three lock classes: spin mutexes, sleep
mutexes, and sx locks. A lock object specifies properties of an
additional lock along with a lock name and all of the extra stuff needed
to make witness work with a given lock. This abstract lock stuff is
defined in sys/lock.h. The lockmgr constants, types, and prototypes have
been moved to sys/lockmgr.h. For temporary backwards compatability,
sys/lock.h includes sys/lockmgr.h.
- Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin
locks held. By making this per-cpu, we do not have to jump through
magic hoops to deal with sched_lock changing ownership during context
switches.
- Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with
proc->p_sleeplocks, which is a list of held sleep locks including sleep
mutexes and sx locks.
- Add helper macros for logging lock events via the KTR_LOCK KTR logging
level so that the log messages are consistent.
- Add some new flags that can be passed to mtx_init():
- MTX_NOWITNESS - specifies that this lock should be ignored by witness.
This is used for the mutex that blocks a sx lock for example.
- MTX_QUIET - this is not new, but you can pass this to mtx_init() now
and no events will be logged for this lock, so that one doesn't have
to change all the individual mtx_lock/unlock() operations.
- All lock objects maintain an initialized flag. Use this flag to export
a mtx_initialized() macro that can be safely called from drivers. Also,
we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness
performs the corresponding checks using the initialized flag.
- The lock order reversal messages have been improved to output slightly
more accurate file and line numbers.
and change the u_int mtx_saveintr member of struct mtx to a critical_t
mtx_savecrit.
- On the alpha we no longer need a custom _get_spin_lock() macro to avoid
an extra PAL call, so remove it.
- Partially fix using mutexes with WITNESS in modules. Change all the
_mtx_{un,}lock_{spin,}_flags() macros to accept explicit file and line
parameters and rename them to use a prefix of two underscores. Inside
of kern_mutex.c, generate wrapper functions for
_mtx_{un,}lock_{spin,}_flags() (only using a prefix of one underscore)
that are called from modules. The macros mtx_{un,}lock_{spin,}_flags()
are mapped to the __mtx_* macros inside of the kernel to inline the
usual case of mutex operations and map to the internal _mtx_* functions
in the module case so that modules will use WITNESS and KTR logging if
the kernel is compiled with support for it.
process we're looking for. (I don't think this can currently
happen, but it depends how the function is called).
PR: 25932
Submitted by: David Xu <davidx@viasoft.com.cn>
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.
- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.
src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.
libcam/Makefile: libcam now depends on libsbuf.
libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.
bsd.libnames.mk: Add LIBSBUF.
camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.
camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.
sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.
Fix a typo.
cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.
Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.
cam.h: Add a new CAM flag, CAM_RETRY_SELTO.
Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().
cam_ccb.h: Add new transfer negotiation structures/types.
Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.
cam_debug.h: Fix typo.
cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().
In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.
cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)
Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().
scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.
scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.
Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.
Change the default actions around a bit.
scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.
scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.
Get rid of the last vestiges of a read/write
interface.
libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.
aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.
sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.
Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.
Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.
Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.
kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.
Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken
MCLGET macros in order to avoid incrementing the drop count twice.
Otherwise, in some cases, we may increment m_drops once in m_mballoc()
for example, and increment it again in m_mballoc_wait() if the
wait fails.
because libc/rpc/key_call.c references uname(), and ps/print.c also
defines uname(), and ps is linked statically. This leads to a symbol
clash. The userland uname(3) kinda sucked anyway as the hostname
etc was too short. And since the libc rpc interface now uses
the utsname.nodename which gets truncated, I was tempted into doing
something about it. Create a new userland uname function, called
__xuname() which takes an extra argument that allows you to change
the size of the fields. uname() becomes a static inline function
in sys/utsname.h that passes the extra argument in. struct utsname
has its field members expanded by default now in userland.
We still provide a 'uname' externally linkable function for things
that either think that they ``know'' the utsname format and assume
32 character strings and bypass the include file, or objects that
are linked against old libcs. ie: just about every plausible
case that I can think of is covered. Should we ever change the
default lengths again, a libc major bump should not be required
as the size is now passed to the function.
XXX the uname(2) in the kernel is for FreeBSD 1.1 binary compatability!
All the uname(3) functions that are exported to userland are actually
implemented in libc with sysctl. uname(1) uses sysctl directly and
does not call uname(3).
PR: bin/4688
Allow the initial hash value to be passed in, as the examples do.
Incrementally hash in the dvp->v_id (using the official api) rather than
add it. This seems to help power-of-two predictable filename trees
where the filenames repeat on a power-of-two cycle and the directory trees
have power-of-two components in it. The simple add then mask was causing
things like 12000+ entry collision chains while most other entries have
between 0 and 3 entries each. This way seems to improve things.
- Make sure that m_mballoc() really doesn't allow over nmbufs mbufs to
be allocated from mb_map. In the case where nmbufs-reserved space is not
an exact multiple of PAGE_SIZE (which it should be, but anyway...), we
hold nmbufs as an absolute maximum which need not ever be reached.
- Clean up m_clalloc(); make it more consistent in the sense that the first
argument `ncl' really means "the number of clusters ensured to be allocated"
and not "the number of pages worth of clusters to be allocated," as was
previously the case. This also makes it consistent with m_mballoc() as well
as the comment that preceeds it.
Reviewed by: jlemon
Make the name cache hash as well as the nfsnode hash use it.
As a special tweak, create an unsigned version of register_t. This allows
us to use a special tweak for the 64 bit versions that significantly
speeds up the i386 version (ie: int64 XOR int64 is slower than int64
XOR int32).
The code layout is a little strange for the string function, but I was
able to get between 5 to 10% improvement over the original version I
started with. The layout affects gcc code generation choices and this way
was fastest on x86 and alpha.
Note that 'CPUTYPE=p3' etc makes a fair difference to this. It is
around 45% faster with -march=pentiumpro on a p6 cpu.
the socket buffer size, the receive is done in sections. After completing
a read, call pru_rcvd on the underlying protocol before blocking again.
This allows the the protocol to take appropriate action, such as
sending a TCP window update to the peer, if the window happened to
close because the socket buffer was filled. If the protocol is not
notified, a TCP transfer may stall until the remote end sends a window
probe.
For UP, we were using $tmp_stk as a stack from the data section. If the
kernel text section grew beyond ~3MB, the data section would be pushed
beyond the temporary 4MB P==V mapping. This would cause the trampoline
up to high memory to fault. The hack workaround I did was to use all of
the page table pages that we already have while preparing the initial
P==V mapping, instead of just the first one.
For SMP, the AP bootstrap process suffered the same sort of problem and
got the same treatment.
MFC candidate - this breaks on 4.x just the same..
Thanks to: Richard Todd <rmtodd@ichotolot.servalan.com>
introduce a new argument, "namespace", rather than relying on a first-
character namespace indicator. This is in line with more recent
thinking on EA interfaces on various mailing lists, including the
posix1e, Linux acl-devel, and trustedbsd-discuss forums. Two namespaces
are defined by default, EXTATTR_NAMESPACE_SYSTEM and
EXTATTR_NAMESPACE_USER, where the primary distinction lies in the
access control model: user EAs are accessible based on the normal
MAC and DAC file/directory protections, and system attributes are
limited to kernel-originated or appropriately privileged userland
requests.
o These API changes occur at several levels: the namespace argument is
introduced in the extattr_{get,set}_file() system call interfaces,
at the vnode operation level in the vop_{get,set}extattr() interfaces,
and in the UFS extended attribute implementation. Changes are also
introduced in the VFS extattrctl() interface (system call, VFS,
and UFS implementation), where the arguments are modified to include
a namespace field, as well as modified to advoid direct access to
userspace variables from below the VFS layer (in the style of recent
changes to mount by adrian@FreeBSD.org). This required some cleanup
and bug fixing regarding VFS locks and the VFS interface, as a vnode
pointer may now be optionally submitted to the VFS_EXTATTRCTL()
call. Updated documentation for the VFS interface will be committed
shortly.
o In the near future, the auto-starting feature will be updated to
search two sub-directories to the ".attribute" directory in appropriate
file systems: "user" and "system" to locate attributes intended for
those namespaces, as the single filename is no longer sufficient
to indicate what namespace the attribute is intended for. Until this
is committed, all attributes auto-started by UFS will be placed in
the EXTATTR_NAMESPACE_SYSTEM namespace.
o The default POSIX.1e attribute names for ACLs and Capabilities have
been updated to no longer include the '$' in their filename. As such,
if you're using these features, you'll need to rename the attribute
backing files to the same names without '$' symbols in front.
o Note that these changes will require changes in userland, which will
be committed shortly. These include modifications to the extended
attribute utilities, as well as to libutil for new namespace
string conversion routines. Once the matching userland changes are
committed, a buildworld is recommended to update all the necessary
include files and verify that the kernel and userland environments
are in sync. Note: If you do not use extended attributes (most people
won't), upgrading is not imperative although since the system call
API has changed, the new userland extended attribute code will no longer
compile with old include files.
o Couple of minor cleanups while I'm there: make more code compilation
conditional on FFS_EXTATTR, which should recover a bit of space on
kernels running without EA's, as well as update copyright dates.
Obtained from: TrustedBSD Project
Bosko Milekic
Alfred Perlstein
John Baldwin
Robert Watson
Paul Saab
David Malone
Yaroslav Tykhiy
Kenneth D. Merry
Boris Popov
Poul-Henning Kamp
Peter Wemm
Bruce Evans
Jonathan Lemon
Søren Schmidt