leaked memory on each unload and were limited to items referenced in
the kernel copy of vnode_if.c. Now a kernel module is free to create
it's own VOP_FOO() routines and the rest of the system will happily
deal with it, including passthrough layers like union/umap/etc.
Have VFS_SET() call a common vfs_modevent() handler rather than
inline duplicating the common code all over the place.
Have VNODEOP_SET() have the vnodeops removed at unload time (assuming a
module) so that the vop_t ** vector is reclaimed.
Slightly adjust the vop_t ** vectors so that calling slot 0 is a panic
rather than a page fault. This could happen if VOP_something() was called
without *any* handlers being present anywhere (including in vfs_default.c).
slot 1 becomes the default vector for the vnodeop table.
TODO: reclaim zones on unload (eg: nfs code)
removed at module unload (if in a module of course).
However; this introduces a new dependency on <sys/kernel.h> for things
that use MALLOC_DECLARE(). Bruce told me it is better to add sys/kernel.h
to the handful of files that need it rather than add an extra include to
sys/malloc.h for kernel compiles. Updates to follow in subsequent commits.
dereference a NULL pointer, causing a panic. Instead of following
s_leader to find the session id, store it in the session structure.
Jukka found the following info:
BTW - I just found what I have been looking for. Std 1003.1
Part 1: SYSTEM API [C LANGUAGE] section 2.2.2.80 states quite
explicitly...
Session lifetime: The period between when a session is created
and the end of lifetime of all the process groups that remain
as members of the session.
So, this quite clearly tells that while there is any single
process in any process group which is a member of the session,
the session remains as an independent entity.
Reviewed by: peter
Submitted by: "Jukka A. Ukkonen" <jau@jau.tmt.tele.fi>
of the input file more strict and the error messages more elaborate.
Second, the output file has slightly improved looks when >80 character
lines are concerned (I needed a 80 character line formatter anyway for
work...)."
Submitted by: Nick Hibma <nick.hibma@jrc.it>
truncated to 32 bits.
* Change the calling convention of the device mmap entry point to
pass a vm_offset_t instead of an int for the offset allowing
devices with a larger memory map than (1<<32) to be supported
on the alpha (/dev/mem is one such).
These changes are required to allow the X server to mmap the various
I/O regions used for device port and memory access on the alpha.
we can recurse when loading dependencies and that the kstack is limited
to something like 6 or 7KB. Having a single dependency caused an instant
double panic, and I stronly suspect some of the other strange "events"
that I have seen are possibly as a result of taking a couple of interrupts
with a large chunk of the stack already in use.
While here, fix a minor logic hiccup in a sanity check.
file to a stream socket. sendfile(2) is similar to implementations in
HP-UX, Linux, and other systems, but the API is more extensive and
addresses many of the complaints that the Apache Group and others have
had with those other implementations. Thanks to Marc Slemko of the
Apache Group for helping me work out the best API for this.
Anyway, this has the "net" result of speeding up sends of files over
TCP/IP sockets by about 10X (that is to say, uses 1/10th of the CPU
cycles) when compared to a traditional read/write loop.
Also fix data types and printf formats while I'm here.
PR: misc/8494
Panic instead of looping forever in sbflush(). If sb_mbcnt counts
more mbufs than sb_cc counts bytes, the original code can turn into an
infinite loop of removing 0 bytes from the socket buffer until it's empty.
the NFSv3 ACCESS RPC problems a little for busy clients that do a lot of
open/close. The nfs code could probably cache the results, but I'm not
sure whether this would be legal or useful. The problem is that with
a CPU farm, on each open there would be a lookup, getattr then access RPC
then the read/write RPC activity. Caching the access results probably
isn't going to help much if the clients access lots of files. Having the
nfs_access() routine interpret the getattr results is a bit of a hack, but
it's how NFSv2 is done and it might be OK for a mount attribute for v3.
- Use TAILQ_* macros extensively instead of internal names
- use b_xflags instead of the NOLIST magic number hack in the next pointer
- clean bufs are inserted at the tail rather than the head.
- redo dirty buffer insert so that metadata (negative lbn) goes to the
tail directly rather than at the HEAD. This makes a difference when
inserting dirty data blocks in lbn sorted order since data block
insertion will not have to bypass all the metadata cruft. data is
lbn sorted since it makes sense for clustering and writeback ordering,
while metadata sorting doesn't help much since the lbn's are
meaningless when walking the list for writebacks.
Small systems will not notice much (if any) benefit from this, but really
busy systems with large dirty block lists should get a lot more.
I've tested this with softdep, and it doesn't seem to mind the change of
queueing of metadata.
Reviewed (in princible) by: dg
Obtained from: partly from John Dyson's work-in-progress patches in June.
the old true/false.
While here, have vfs_msync() only call vm_object_page_clean() with
OBJPC_SYNC if called with MNT_WAIT flags. vfs_msync() is called at unmount
time (with MNT_WAIT) and from the syncer process (formerly update).
This should make dirty mmap writebacks a little less nasty.
I have tested this a little with SOFTUPDATES enabled, but I don't normally
use it since I've been badly burned too many times.
installed.
Remove cpu_power_down, and replace it with an entry at the end of the
SHUTDOWN_FINAL queue in the only place it's used (APM).
Submitted by: Some ideas from Bruce Walter <walter@fortean.com>
clear if the check is necessary, but vfs_object_create() is called
for all vnodes and it was silly to create objects for VBLK vnodes
that don't even have a driver.
- dev != NODEV was checked for, but 0 was returned on failure. This was
fixed in Lite2 (except the return code was still slightly wrong (ENODEV
instead of ENXIO)) but the changes were not merged. This case probably
doesn't actually occur under FreeBSD.
- major(dev) was not checked to have a valid non-NULL bdevsw entry. This
caused panics when the driver for the root device didn't exist.
Fixed minor misformattings in bdevvp(). Rev.1.14 consisted mainly of
gratuitous reformattings that seem to have caused many Lite2 merge
errors.
PR: 8417
If you have problems with the "calcru" messages and processes being
killed for excessive cpu time, try to increase the NTIMECOUNTER
#define and report your findings.
- Use the system headers method for Elf32/Elf64 symbol compatability
- get rid of the UPRINTF debugging.
- check the ELF header for compatability much more completely
- optimize the section mapper. Use the same direct VM interfaces that
imgact_aout.c and kern_exec.c use.
- Check the return codes from the vm_* functions better. Some return
KERN_* results, not an errno.
- prefault the page tables to reduce startup faults on page tables like
a.out does.
- reset the segment protection to zero for each loop, otherwise each
segment could get progressively more privs. (eg: if the first was
read/write/execute, and the second was meant to be read/execute, the
bug would make the second r/w/x too. In practice this was not a
problem because executables are normally laid out with text first.)
- Don't impose arbitary limits. Use the limits on headers imposed by
the need to fit them into one page.
- Remove unused switch() cases now that the verbose debugging is gone.
I've been using an earlier version of this for a month or so.
This sped up ELF exec speed a bit for me but I found it hard to get
consistant benchmarks when I tested it last (a few weeks ago).
I'm still bothered by the page read out of order caused by the
transition from data to bss. This which requires either part filling the
transition page or clearing the remainder.
a raw partition at a nonzero offset (EINVAL should have been EXDEV;
DIOCSDINFO was broken, and DIOCWDINFO was broken because it depended
on DIOCSDINFO).
A zero offset for the raw partition should probably be enforced in
setdisklabel(), and DIOCWDINFO should probably always be handled by
first calling setdisklabel() so that writedisklabel() doesn't need to
enforce it, but this has never been done; dsioctl() has a special
check. Changes in this commit are limited to dsioctl() to preserve
bug for bug compatibility in drivers that don't use the slice code
(notably the ccd driver, which allows setting a bogus label in
DIOCWDINFO and doesn't undo the setting when writedisklabel() fails).
partition that the label ioctl is being done on just because it has
offset 0, since there is no guarantee that such a partition is large
enough to contain the label. Don't use the wrong raw partition (0
instead of RAW_PART).
This fixes problems rewriting bizarre labels (with a nonzero offset
for the 'a' partition) in newfs(8). Such labels shouldn't normally
be used, but creating them was allowed if the ioctl was done on the
raw partition, and sysinstall creates them if the root partition isn't
allocated first.
Note that allowing write access to a partition other than the one that
has been checked for write access doesn't increase security holes
significantly, since write access to any partition already allows
changing the in-core label.
This fix should be in 3.0R. Rev.1.26 of newfs/newfs.c shouldn't be
in 3.0R.
Peter Wemm
Don Lewis
Nicolas Souchu
Doug Rabson
David Greenman
Bill Fenner
Mike Smith
Bruce Evans
Garrett Wollman
Poul-Henning Kamp
John Polstra