b8e91dab53
Update swap and dump stuff to match reality:
...
- option DODUMP no longer exists (remove all references to it).
- directive `swap on' is now a no-op (don't bother documenting it; remove
comment to match code).
- directive `dumps on' still works (restore code to match comment; deprecate
it in comment).
Reviewed by: Poul-Henning Kamp, and me
Submitted by: Bruce Evans
1995-05-27 04:32:12 +00:00
5eb46edfb0
Added "BROKEN_KEYBOARD_RESET" option to disable using the keyboard reset
...
in cpu_reset(). Some MBs don't deal with this properly.
Submitted by: Rod Grimes
1995-05-18 09:17:07 +00:00
a401ebbe32
Changed swap partition handling/allocation so that it doesn't
...
require specific partitions be mentioned in the kernel config
file ("swap on foo" is now obsolete).
From Poul-Henning:
The visible effect is this:
As default, unless
options "NSWAPDEV=23"
is in your config, you will have four swap-devices.
You can swapon(2) any block device you feel like, it doesn't have
to be in the kernel config.
There is a performance/resource win available by getting the NSWAPDEV right
(but only if you have just one swap-device ??), but using that as default
would be too restrictive.
The invisible effect is that:
Swap-handling disappears from the $arch part of the kernel.
It gets a lot simpler (-145 lines) and cleaner.
Reviewed by: John Dyson, David Greenman
Submitted by: Poul-Henning Kamp, with minor changes by me.
1995-05-14 03:00:10 +00:00
d0930614cc
Add 'rc' line
1995-05-12 15:17:55 +00:00
9cc347481f
Remove all vestiges of the ALLOW_CONFLICT_FOO evil and replace it with
...
something slightly less evil - a per device conflict flag.
1995-05-11 02:15:55 +00:00
85827d9c13
Restructured the floppy tape probe.
...
The ``flags 1'' in the fdc line is now only needed for owners of an
Insight tape (perhaps there aren't any? Mine is disfunctional). All
other probes are safe wrt. to the motor-control line of floppy disk
drives. Document the flag in LINT finally.
1995-05-06 19:34:28 +00:00
f73bbaf2fa
Fix spelling error. Commented out ISO and ISO related things until I
...
either fix it or we decide to remove it. It requires implementing PCB
hashing to get it to compile and likely a lot more to get it to work..
1995-05-05 07:47:44 +00:00
657e73c4f5
Add National Instruments "LabPC" driver
1995-04-28 00:51:40 +00:00
d52d7365c6
Document MFS_ROOT option.
1995-04-25 03:44:04 +00:00
d3f4d460f8
Added "bio" to matcd.
1995-04-24 05:33:59 +00:00
e3dd31586c
Removed the NSECS_MULTI option, and implemented both 32 bit probe
...
enable and multi-sector I/O enable by using the controller or device
flags capability. Per a suggestion by phk.
1995-04-24 04:30:19 +00:00
1a7c583c01
Substantially clean up LINT and add `fe'.
1995-04-23 18:30:27 +00:00
5b920a895d
Document the wd.c option NSECS_MULTI.
1995-04-22 22:39:33 +00:00
b6b8f81ead
Add quotes around TUNE_1542
1995-04-18 11:02:22 +00:00
8909a72b5d
Add "sctarg" and document new SCSI_REPORT_GEOMETRY option for ache
1995-04-14 15:12:24 +00:00
e5f2c8f67e
Add "BREAK_TO_DEBUGGER" option.
1995-04-12 22:02:51 +00:00
63373752ea
Move default address of lnc0 to 0x300. Luigi Rizzo said that his card
...
cannot even go below 0x300...
1995-04-08 21:41:52 +00:00
017e602c0c
pca: change IO_PPI to IO_TIMER1 due to syscons conflict
1995-04-08 16:08:35 +00:00
fe696eb64c
Update pcvt to 3.20 b24
1995-04-08 15:49:25 +00:00
12cfa43650
Added the "eg0" interface driver for the 3Com "3c505" or "etherlink/+"
...
card. This is the braindamaged card with the 80186 CPU on it. It is
slow, probably not very good after all, but hey, if you have one lying
around doing nothing anyway...
Added the "zp0" driver to GENERIC.
1995-04-08 09:36:04 +00:00
e64ae15d3a
Add port IO_PPI for pca per Bruce suggestion
1995-04-06 14:01:20 +00:00
0264a8a9c6
0x330 is the default address for SB Midi, not 0x300
...
Submitted by: Doug Rabson <dfr@render.com>
1995-04-06 03:22:12 +00:00
ad0c439a34
Submitted by: Mahesh Neelakanta <mahesh@gcomm.com>
...
Change I/O address of Intel EtherExpress driver (ix0) from 0x280 to
0x300.
1995-03-30 00:20:08 +00:00
e5e6090541
Added NQNFS option and a comment warning about it's overhead.
1995-03-29 05:14:22 +00:00
9829c3ed2e
Change ahc driver comment to note that it's not just the 274x controller
...
it supports.
1995-03-28 08:14:55 +00:00
f8e028be26
Add Intel EtherExpress16 (ix0) driver.
...
Reviewed by:
Submitted by:
Obtained from:
1995-03-18 08:12:48 +00:00
de6a307ec7
Document scsi options
1995-03-15 14:27:01 +00:00
d41f24e742
Added support for generic FDDI and the DEC DEFEA and DEFPA FDDI adapters.
...
Submitted by: Matt Thomas
1995-03-14 09:16:07 +00:00
a91ccb55cf
Change device entry examples to reflect the following:
...
Remove PAS-only entry for OPL as ache pointed out.
Update OPL comment to show OPL-2 or OPL-3 support as it is auto-detected.
1995-03-13 18:49:37 +00:00
12fd08535f
Remove old snd file configuration list and add new file list
...
for the snd controller and the different sound devices.
Update LINT to include all sound device drivers using new format.
Reviewed by: wollman
1995-03-12 23:43:15 +00:00
133d0cef4e
Fix config-time syntax errors in sound options.
1995-03-12 12:18:43 +00:00
7332d95a98
Restore IPACCT out there..
1995-03-06 10:33:34 +00:00
68cfe626f7
pcvt is still using the XSERVER option; document this.
1995-03-05 22:23:35 +00:00
ca83dc2de1
Upgrade the sound drivers to VoxWare pre-3.0 and fix a number of bugs.
...
Make the sound configuration a little neater
(see /sys/i386/isa/sound/Readme.freebsd)
Add support for the Microsoft Sound Source.
Document the sound options again.
Submitted by: Sujal Patel <smpatel@wam.umd.edu>
Obtained from: Voxware
1995-03-04 21:11:21 +00:00
05e1d9d455
Changes to incorporate the Matsushita CDROM driver (otherwise known as
...
the "Sound blaster CDROM").
Submitted by: Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:07:03 +00:00
ebc1a0e2f8
Added a little documentation on the fixed SCSI config and
...
fixed a few quirks that snuck in.
1995-03-01 22:27:45 +00:00
226d4c89da
Make diskslice files standard and remove option DISKSLICE. ufs_disksubr.c
...
needed a diskslice function yesterday and all disk drivers will need it.
The diskslice initialization routine should be configurable (but isn't).
1995-02-23 17:19:54 +00:00
f1f0a0bf8b
Remove the SCSI idsn line - it's permanantly dead.
1995-02-19 14:07:28 +00:00
f1f041888e
Remove the ISDN dialer from LINT until it's working.
1995-02-17 09:33:29 +00:00
648c711bb4
This is the latest version of the APM stuff from HOSOKAWA, I have looked
...
briefly over it, and see some serious architectural issues in this stuff.
On the other hand, I doubt that we will have any solution to these issues
before 2.1, so we might as well leave this in.
Most of the stuff is bracketed by #ifdef's so it shouldn't matter too much
in the normal case.
Reviewed by: phk
Submitted by: HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1995-02-17 02:22:57 +00:00
f2eea8100f
We can enable pcd0 when we actually have one.
1995-02-15 06:18:15 +00:00
a46a6df7e5
Comment out snic0 until it gets updated to the newer scsi code.
1995-02-15 04:49:18 +00:00
6f96f72b16
Add ISDN entries to LINT.
1995-02-15 00:53:15 +00:00
4cba45558a
pseudo-device snp 3
...
Example entry for snoop.
1995-02-14 21:15:12 +00:00
9da6a15aa4
Pick a more sensible default for # of ptys, add comment that this can
...
go as high as 64 now.
1995-02-12 09:29:59 +00:00
b60d4a5d98
Delete a redundant line - "options TUN" and Add explanation for
...
"pseudo-device tun" as same as other device.
1995-02-10 05:42:24 +00:00
cfc9f6212d
Add the Cyclades serial driver code (ALPHA) from Andrew Werple and
...
adapted to FreeBSD by Heikki Suonsivu <hsu@cs.hut.fi>.
Submitted by: Andrew Werple <andrew@werple.apana.org.au> and
Heikki Suonsivu <hsu@cs.hut.fi>
Obtained from: NetBSD
1995-02-09 09:47:31 +00:00
2cd01159da
The very minimum driver required to support a Video Spigot. See the
...
copyright notices in the code for information on where to go to pick
up additional useful bits.
Submitted by: Jim Lowe <james@blatz.cs.uwm.edu>
1995-02-06 23:19:49 +00:00
4530be5246
Bring PCVT's config files into the tree.
...
Submitted by: mh
1995-02-05 10:56:47 +00:00
2d3f9865da
Add Tunnel device for ppp (iijppp)
1995-01-31 06:33:58 +00:00
988862353e
Describe default MAXCONS value: 12
1995-01-30 14:40:06 +00:00
e05407d84b
New and far better NCR5380/NCR53400 scsi-driver.
...
Handles at least Trantor T130 and ProAudioSpectrum adapters.
The pas driver has consequently been removed.
This driver can be configured without without interrupts.
Manpage to follow when PAS16 has been edited in.
Reviewed by: phk
Submitted by: Serge Vakulenko, <vak@cronyx.ru>
1995-01-27 07:49:19 +00:00
89d8fc79de
MAXCONS option described
1995-01-26 11:00:12 +00:00
87fcda4634
Remove FAT_CURSOR, it is already non-existent during several
...
last syscons versions
1995-01-26 05:04:37 +00:00
b5d89ca8ad
Load the kernel symbol table in the boot loader and not at compile time.
...
(Boot with the -D flag if you want symbols.)
Make it easier to extend `struct bootinfo' without losing either forwards
or backwards compatibility.
ddb_aout.c:
Get the symbol table from wherever the loader put it.
Nuke db_symtab[SYMTAB_SPACE].
boot.c:
Enable loading of symbols. Align them on a page boundary. Add printfs
about the symbol table sizes.
Pass the memory sizes to the kernel.
Fix initialization of `unit' (it got moved out of the loop).
Fix adding the bss size (it got moved inside an ifdef).
Initialize serial port when RB_SERIAL is toggled on.
Fix comments.
Clean up formatting of recently added code.
io.c:
Clean up formatting of recently added code.
netboot/main.c, machdep.c, wd.c:
Change names of bootinfo fields.
LINT:
Nuke SYMTAB_SPACE.
Fix comment about DODUMP.
Makefile.i386:
Nuke use of dbsym.
Exclude gcc symbols from kernel unless compiling with -g.
Remove unused macro.
Fix comments and formatting.
genassym.c:
Generate defines for some new bootinfo fields. Change names of old ones.
locore.s:
Copy only the valid part of the `struct bootinfo' passed by the loader.
Reserve space for symbol table, if any.
machdep.c:
Check the memory sizes passed by the loader, if any. Don't use them yet.
bootinfo.h:
Add a size field so that we can resolve some mismatches between the loader
bootinfo and the kernel boot info. The version number is not so good for
this because of historical botches and because it's harder to maintain.
Add memory size and symbol table fields. Change the names of everything.
Hacks to save a few bytes:
asm.S, boot.c, boot2.S:
Replace `ouraddr' by `(BOOTSEG << 4)'.
boot.c:
Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT"
code that skips the BIOS variables. Eliminate `total'. Combine some
more printfs.
boot.h, disk.c, io.c, table.c:
Move all statically initialzed data to table.c.
io.c:
Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
673f8dc3be
Add: device joy0 at isa? port "IO_GAME" (joystick)
1995-01-25 20:35:14 +00:00
94187a78bf
is to lnc changes
1995-01-24 20:38:39 +00:00
3691d2b97c
Add support for Olof Johansson's WD7000 driver.
...
Submitted by: Olof Johansson <offe@ludd.luth.se>
Obtained from:
1995-01-23 00:25:03 +00:00
0dd1eea105
Put UCONSOLE back - I was wrong, it's still used in one last place.
...
Submitted by: ollivier
1995-01-14 02:39:22 +00:00
09c42f85eb
1. Remove UCONSOLE. This appears to be well and truly dead (unless it's
...
hiding someplace in /sys I can't find).
2. Remove NCONS. Soren's latest changes make it a no-op.
1995-01-12 15:37:16 +00:00
2f6df2645b
Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s
...
driver for the Genius GS-4500 hand scanner.
Submitted by: gusw@fub46.zedat.fu-berlin.de
1995-01-07 14:52:08 +00:00
2d85986466
Add examples for the sony and the panasonic drivers.
1994-12-26 17:33:52 +00:00
59d8d13f60
Added `ds', a black-hole network interface.
1994-12-22 21:00:05 +00:00
fc0a941a94
Bump LINT's symtab space.
1994-12-17 08:37:22 +00:00
cdf25f3740
Add Fred Cawthorne's GPIB driver.
...
Submitted by: fcawth@delphi.umd.edu
1994-12-17 08:07:03 +00:00
8c664261f7
Uncomment DISKSLICE; it should work now (for drivers that support it).
1994-12-16 16:58:08 +00:00
784cf072d8
Remove sd1-sd3 & st1, now that we can autoallocate them.
...
fix the vn driver in LINT. It autoallocates too.
Reviewed by: phk
Submitted by: rgrimes
1994-12-16 06:04:16 +00:00
0d2d94f67b
Add ahc driver, more symtab space.
1994-12-13 22:01:35 +00:00
3aa0699930
Delete `HZ' option; it's only of use to Bruce and screws up the NTP PLL
...
(among other things). Correctly specify `vn' as a pseudo. Make sure
things are in the right places.
1994-12-13 20:56:30 +00:00
9ba0e7c355
Add old options HZ, VN, ALLOW_CONFLICT_DRQ, ALLOW_CONFLICT_MEMADDR,
...
AUTO_EOI_1, AUTO_EOI_2, COMCONSOLE, COM_MULTIPORT.
Add new option DISKSLICE.
Change comments about DUMMY_NOPS.
1994-12-11 23:52:18 +00:00
3339606d9a
Document the options DUMMY_NOPS and TUNE_1542.
1994-12-11 00:09:34 +00:00
663afbc34f
Make CHILD_MAX and OPEN_MAX a tunable parameter.
1994-12-03 17:36:37 +00:00
83401efa16
Add Cronyx/Sigma files and config information; delete outdated config files.
1994-12-03 00:17:55 +00:00
0e01a1ca15
Expand again the SYMTAB_SPACE for LINT.
1994-11-27 14:59:54 +00:00
9ec2a4b3e3
Added #define PROBE_VERBOSE and description (PCI chip set boot messages)
...
Reviewed by:
Submitted by:
Obtained from:
1994-11-24 20:35:21 +00:00
5783a8ffe5
The SYMTAB_SPACE bloatometer was 40% out of date.
1994-11-15 14:28:46 +00:00
ada9d061d4
Add back ze0 driver; somebody took it out of _both_ LINT and GENERIC,
...
kinda hosing the laptop folks.
1994-11-08 07:39:28 +00:00
98020fdd6c
Added a kernel variable, "dodump" defaulting to zero, which disables dumps.
...
Somebody should make a mib variable for it.
Just now it is pointless to dump the kernel, since we have nothing which
can read the dump.
Furthermore is should never be the default to dump.
options DODUMP
will enable dumps.
1994-11-07 03:51:32 +00:00
b851eb1523
Eliminate USERCONFIG. This option is now standard.
1994-11-03 15:51:38 +00:00
d29895dc1a
Fix Jordan's misplaced IPFIREWALL option. Fix style of other previous commits.
...
Document ARP_PROXYALL.
1994-11-02 01:11:03 +00:00
95b926abab
Documented the FDSEEKWAIT option.
1994-10-30 20:57:07 +00:00
100ba1a617
IP Firewall code from Daniel Boulet and J.S.Antsilevich
...
Submitted by: danny ugen
1994-10-28 15:09:49 +00:00
d1a27c8dab
Stylistic changes.
1994-10-26 21:10:13 +00:00
cb72513713
Enable USERCONFIG and document it in LINT.
1994-10-26 19:20:27 +00:00
3c43212ad8
Added sea0 - Seagate driver lines to config
1994-10-24 22:18:12 +00:00
6a8d662377
LINT: vastly restructured so that it's actually useful for something
...
Makefile.i386: make definition of STRIP unconditional.
1994-10-21 01:10:54 +00:00
c47b6376fd
According to a quick reading of sources, one experiment and Bruce's word:
...
aha, ahb and bt all on "irq ?" now.
1994-10-20 00:53:30 +00:00
12396a6a16
Bruce told me to: Make uha0 use irq ?
1994-10-20 00:19:37 +00:00
4da5299d11
Sanitized a little bit. All SCSI is now "controllers" and LINT is more
...
sorted now.
1994-10-15 08:09:42 +00:00
70c0b54c8a
USE_RTC_CENTURY added
1994-10-04 14:11:02 +00:00
8819d6eca4
I added "pserudo-device gzip" as default.
1994-10-03 22:32:13 +00:00
fae772f7b2
Added Cortex-I Frame Grabber by Paul S. LaFollette, Jr.
...
Submitted by: Paul S. LaFollette, Jr.
1994-10-01 17:59:42 +00:00
93e9832a32
#Driver for Advaced Power Management (also need options APM)
...
-device apm0 isa?
+device apm0 at isa?
1994-10-01 16:44:07 +00:00
3af6b6527a
Added options APM and device apm0 for Advanced Power Management support.
1994-10-01 05:43:09 +00:00
af27b9fc77
GENERIC*: remove commented-out options; the user should have to do
...
/some/ research to figure out how to turn them on.
LINT: better description of TCP_COMPAT_42: ``emulate 4.2BSD TCP bugs''.
1994-09-28 22:57:24 +00:00
33e7ce7c3d
LKMs are no longer options, so remove the `options LKM' from LINT.
1994-09-28 22:51:54 +00:00
5c370a2e33
Added entries for PCI and NCR device drivers.
1994-09-28 17:00:14 +00:00
0dc7d9074f
Added
...
options DIAGNOSTIC
options MSDOSFS_DEBUG
1994-09-27 20:36:26 +00:00
31208007c7
Jim Babb's port of the AIC6360 code.
...
Submitted by: babb
Obtained from: NetBSD
1994-09-26 16:15:06 +00:00
7bf314246a
HARDFONTS option documented
1994-09-25 02:10:47 +00:00
16b49b3e73
Removed last vestige of MULTICAST option.
1994-09-23 06:22:58 +00:00
c9b1d6048d
More loadable VFS changes:
...
- Make a number of filesystems work again when they are statically compiled
(blush)
- FIFOs are no longer optional; ``options FIFO'' removed from distributed
config files.
1994-09-22 19:38:41 +00:00
3f9a698275
Added MSDOSFS option.
1994-09-19 15:45:02 +00:00
12cada7161
Add SYSV shm stuff back to LINT.
...
chflags noschg /kernel in Makefile.i386 so if our previous kernel
was installed by make install, the second won't fall over.
1994-09-16 10:23:46 +00:00
66ce0eae53
Added DSI_SOFT_MODEM
1994-09-13 03:34:08 +00:00
2c2006d83f
Deleted the pccons driver from the files.i386, added the seagate driver
...
into files.i386.
LINT:
Deleted the timezone line. Commented out the maxfdescs line and the
SYSVSHM and the SHMMAXPGS lines.
1994-09-11 21:09:52 +00:00
e32458368f
Remove *_SAVER syscons options - I don't know how they go in here:
...
(These options did not even really exist in 1.1.5.1)
CVS:
1994-09-09 22:12:38 +00:00
2ac8be827f
Reviewed by:
...
Delete the hints to the sg driver. This thing was never finished and
has now been beaten by the sea driver.
1994-09-05 22:32:42 +00:00
9aba88bf29
Rather than exclude bounce buffers support with NOBOUNCE, include it
...
with BOUNCE_BUFFERS. This is more intuitive, and is better for future
multiplatform support. Added BOUNCE_BUFFERS option to the GENERIC and
LINT kernel config files.
1994-08-31 06:17:49 +00:00
f1a9c71596
Made a little more up to date.
1994-08-28 06:46:25 +00:00
d5e4441ddd
Updated this a bit. It's still woefully out of date.
1994-08-27 16:23:03 +00:00
e9d1679134
Added my ProAudioSpectum SCSI driver for cards with the 5380 SCSI-chip.
...
This is the slowest and most stupid of our SCSI-drivers, but it is there
and it works. It has been tested with CD-ROM and disk.
It uses no interrupts, no DMA, just polled I/0.
Transfer-rate is <= 100Kbyte/sec.
If you set the jumpers on the board, you can change the unit-number and
you will be able to have four of these co-exist in one computer, why one
would do that is somewhat unclear though.
If I ever get my hand on the docs for this, I will improve it of course,
but for now we can install and access those CD-ROMs.
1994-08-19 00:01:08 +00:00
0bf1d79182
Remove the now bogus IP_VAT_COMPAT.
1994-05-18 16:23:25 +00:00
33b061c9fd
Add line for IP_VAT_COMPAT, documenting it.
1994-05-17 23:20:32 +00:00
e3178a06e5
Fold in the changes to support IP multicasting, from Jim Lowe et al.
1994-05-17 22:30:41 +00:00
3759860cff
Whoops - comment out psm0 by default in case someone wants to
...
compile this thing. I won't turn on the ALLOW_CONFLICT_IOADDR this would need
to compile instead since that would then rob us of other, possibly important,
conflict checks.
1994-05-17 14:18:13 +00:00
45b4c36f90
Add descriptions of ALLOW_CONFLICT_* options we want to doc for now
...
(only 2). Add entry for psm0 (PS/2 mouse).
1994-05-17 14:15:11 +00:00
7d46c3b6d8
Remove confusing (as they are now unnecessary) comments about
...
INACCURATE_MICROTIME_IS_OK. Document what pca0 is.
1994-05-13 08:48:22 +00:00
cfecaf32f0
Added GPL_MATH_EMULATE to options
...
This should not be used in binary distributions.
1994-04-29 21:53:55 +00:00
9ad380ab4c
Define new option, INACCURATE_MICROTIME_IS_OK. When this is defined,
...
the NTP kernel PLL is disabled, and acquire_timer0() is enabled, thus
opening the door for microtime() (and hence gettimeofday()) to return
bogus timestamps. This option is necessary for the `pca' driver to
work, but is implemented to underscore the fact that accurate timekeeping
and the `pca' driver are incompatible at present. If someone writes a version
of microtime() that works when the `pca' driver is being used, this can get
junked.
1994-04-23 21:39:18 +00:00
0897a95d08
device pca0 added
1994-04-23 12:13:27 +00:00
bc906632a8
snd7 config line corrected, irqaremoved
1994-04-13 01:29:14 +00:00
cea06d471b
Remove unneded irq/drq/vector from snd?
1994-04-07 22:18:49 +00:00
32128f4c0d
from kimmel@varese.cs.umass.edu (Matt Kimmel):
...
"el" driver for 3COM 3C501. This driver has some serious performance
problems and drops packets on the floor like hot potatos.
1994-04-07 12:10:31 +00:00
c7ba7a5e32
corrected pointer to sound.doc
1994-04-04 17:27:45 +00:00
27408f32ce
More symtab space.
1994-03-19 22:17:56 +00:00
11e4fa43bc
Added David Mills' kernel NTP PLL code. The current version of NTP does
...
not yet speak to this code.
1994-03-15 01:58:22 +00:00
63a7486262
Removed EXCLUDE_<driver> for sound drivers so that all sound drivers
...
are compiled into kernel. Users are referred to sound doc for info.
1994-03-11 22:17:24 +00:00
62d15cccd2
Added appropriate entries into files.i386 for snd drivers in /sys/i386/isa/sound
...
Added new snd drivers and EXCLUDE_<driver> options to LINT.
1994-03-11 10:31:05 +00:00
9b73b5a04a
dcfclk driver obsoleted, sio/TIOCTIMESTAMP took over.
1994-02-27 21:53:54 +00:00
8d43398bd2
Commented on what the mse0, mcd0, and lpt/lpa devices were used for.
...
(No functional changes)
1994-02-09 05:35:57 +00:00
c1eeb17fc0
Add floppy tape support (missed these when changing G*)
1994-02-07 05:55:50 +00:00
1be30750de
BLANK_SAVER syscons option added
1994-02-01 10:46:43 +00:00
21c64a07fe
Add FADE_SAVER option from new syscons.
1994-02-01 08:34:16 +00:00
da59a31c01
WINE/user LDT support from John Brezak, ported to FreeBSD by Jeffrey Hsu
...
<hsu@soda.berkeley.edu>.
1994-01-31 10:27:13 +00:00
ec40982451
Remove commented out PROCFS, it is standard.
1994-01-29 21:41:36 +00:00
bcbd5c8c3d
Set FIFO_TRIGGER in more human-readable form
1994-01-29 03:17:39 +00:00
690f540c97
Add FIFO_TRIGGER value for sio.c
1994-01-27 01:01:22 +00:00
7e9dd2e95c
Disabled sg disk driver in LINT since there is no sg.c file in isa yet!
...
Removed com port comments, since we are about to depricate the driver.
Fix several plaes in LINT where people have been cutting and pasting using
xterms :-(
1994-01-25 11:08:25 +00:00
bf0e6e5324
Sound driver options added
1994-01-25 03:16:31 +00:00
f4767d9a94
No longer need SYSVIPC option, any of the SYSV options now trigger the
...
kern/sysv_ipc.c file for inclusion in the kernel.
1994-01-22 09:25:37 +00:00
2ae37484c6
System V IPC code from Danny Boulet, chewed on a bit by the NetBSD group
...
and then some more by Jeffrey Hsu (who provided this port for FreeBSD).
1994-01-21 09:56:05 +00:00
db703a94ed
Removed at clause from LINT since it was wrong and is no longer needed.
1994-01-17 05:45:26 +00:00
6216795300
Documented the drivers more in the LINT file. Added a line in files.i386
...
and LINT for the integration of a Seagate ST01/02 SCSI controller.
1994-01-16 12:01:34 +00:00
b2aba26166
Now enabled the line for the 3C509 driver.
1994-01-10 18:53:52 +00:00
1668b3a88d
Added lines for an Etherlink III ( 3C509 ) driver.
1994-01-09 13:30:50 +00:00
f3f1a1b513
SCSIDUMP option no longer needed, it is now standard.
1994-01-06 18:15:20 +00:00
b935223e65
Added dumps on wd0 to the end of all config lines so people know about it
...
and can change it. This really won't change the kernels, it just documents
how to do the dumps on option.
1994-01-05 14:56:50 +00:00
2620c42ea3
Updated config files for new multi-controller wd.c driver and removed
...
outdated wx config file.
1994-01-04 20:10:34 +00:00
990ac0b7cb
Added support for X.25 as a network-layer protocol under ISO TP class 0, as
...
is commonly used in Europe. Make it compile, and bump up symtab space as
needed.
1993-12-19 22:45:13 +00:00
David Greenman
Andrey A. Chernov
Jordan K. Hubbard
Joerg Wunsch
Peter Dufault
Poul-Henning Kamp
John Dyson
Garrett Wollman
Rodney W. Grimes
Steven Wallace
Bruce Evans
Ugen J.S. Antsilevich
Atsushi Murai
Jean-Marc Zucconi
Paul Richards
Andreas Schulz
Scott Mace
Stefan Eßer
Søren Schmidt
Doug Rabson
Geoff Rehmet
Gary Clark II
Nate Williams
Andrew Moore