e5b118dd3d
In the bootverbose case, print out error messages for all errors that will
...
not be retried again, even if the SF_NO_PRINT flag is set.
Reviewed by: gibbs
1998-09-29 22:11:30 +00:00
6b491db1bd
vm86_datacall: always use workaround since temp. malloced buffer or stack
...
area can be passed (and mapped to page1!) as vesa.c does. Use contigmalloc
now to get proper alignment. Bump max buffer size to PAGE_SIZE
1998-09-29 22:06:33 +00:00
d297a4c5b4
Add back a few useful targets lost in the reshuffle.
...
Reviewed by: jb
1998-09-29 22:03:13 +00:00
29a199dbc5
Added double quotes around CHMOD description to prevent garbled output.
...
PR: 8094
Submitted by: Christoph Weber-Fahr <wefa@callcenter.systemhaus.net>
1998-09-29 22:02:06 +00:00
1cda241131
Mark directory buffers that have no valid data with B_INVAL
...
so that they are not put in the cache.
1998-09-29 22:01:10 +00:00
113b88d241
When adding data to a buffer, we need to clear the B_NEEDCOMMIT flag
...
which says that the data is on server but not committed.
1998-09-29 21:46:54 +00:00
cecc3abb9d
Restore v1.3 - page align workaround moved to vm86_datacall now
1998-09-29 20:38:54 +00:00
0e4c0f17f3
Move workaround about page aligned data buffer directly to vm86_datacall,
...
it is impossible to use this func otherwise, i.e. all vesa calls are
potentially broken. Max arg size limited to 1024 for now, bump it, if needed.
1998-09-29 20:36:31 +00:00
ecee3646ce
Fixes for lkm:
...
1. use VFS_LKM vs ACTUALLY_LKM_NOT_KERNEL
2. don't pass -DCODA to lkm build
1998-09-29 20:19:45 +00:00
5081946172
Rename a static variable, so it will not shadowed by a local variable.
...
Now comments will be ignored, rather than put junk in the password database.
Broken in: rev. 1.21
1998-09-29 20:01:21 +00:00
9048a9edbd
Fix the shared library configuration stuff.
...
Noticed by: Ollivier Robert
1998-09-29 18:58:16 +00:00
9379f795cd
Don't erase curproc when making a vm86() call. The previous behavior
...
was a pessimization that broke schedcpu(). (It caused the process to
be remrq()'d).
Reviewed by: Tor Egge
1998-09-29 18:01:18 +00:00
7105c8a242
Add history.
1998-09-29 17:34:25 +00:00
faa5f8d8da
Make #define NO_SWAPPING a normal kernel config option.
...
Reviewed by: jkh
1998-09-29 17:33:59 +00:00
c796cfa18a
Make #define NO_SWAPPING a normal kernel config option.
...
Warn unsuspecting users against current DEVFS pitfalls.
Reviewed by: jkh
1998-09-29 17:33:45 +00:00
74b4790de7
mkdosfs(1) is dead, refere to newfs_msdos(8)
1998-09-29 17:31:28 +00:00
50660db1a6
Add in a kludge for registering the "package" version of XFree86 so
...
various ports don't complain about it. It also requires that the pkg
registration bits be stick into the Xbin tarball so that they'll be
present in /usr/X11R6/lib/X11/pkgreg.tar.gz. The registration tarball
is removed upon first use to prevent it later spamming a genuine build
from ports if inadvertently extracted again.
1998-09-29 14:23:13 +00:00
416ad5ed31
Small update: you need to unpack the stand-alone picobsd tarball into
...
src/release/picobsd, otherwise it won't work.
Pointed out by: Randal Masutani <randal@comtest.com>
1998-09-29 12:23:58 +00:00
a53cd3d253
Add examples for tree functions.
...
Submitted by: "Anatoly A. Orehovsky" <tolik@mpeks.tomsk.su>
1998-09-29 12:22:46 +00:00
0726f7f509
Add support for saved trees.
...
Submitted by: "Anatoly A. Orehovsky" <tolik@mpeks.tomsk.su>
1998-09-29 12:22:36 +00:00
fa72cf69bf
Make proper use of ${suffix} instead of hardwired suffixes.
...
Pointed out by: Randal Masutani <randal@comtest.com>
1998-09-29 12:12:47 +00:00
648e989921
Better handling of "custom" setup.
...
Submitted by: Randal Masutani <randal@comtest.com>
1998-09-29 11:58:54 +00:00
09b41007d5
Once again turn off the BRIDGING - it's not yet ready to be the default...
...
Submitted by: Randal S. Masutani <randal@comtest.com>
1998-09-29 11:27:34 +00:00
dede34d355
Add sysctl 'machdep.msgbuf_clear'. Setting it to anything causes the
...
kernel message buffer to be cleared. It comes handy in situations when
the only logging facility you have is the msgbuf.
Reviewed by: jkh
1998-09-29 11:20:16 +00:00
8814fd974a
Bring man page up to date
1998-09-29 10:26:02 +00:00
2e8bf20912
Fixed printf format errors. u_long is not necessarily suitable for casting
...
pointers to, and %d is not suitable for printing uint32_t's.
1998-09-29 09:18:08 +00:00
894e2bd49e
FIxed printf format errors (an new one that is only detected on systems
...
with pointers smaller than u_longs, and 2 possibly-truncating casts in
the same printf).
1998-09-29 09:14:52 +00:00
a7de32b2aa
The bootinfo struct was getting clobbered or not passed through correctly.
...
Presumably VTOP doesn't work for static objects.
The easiest way to get it working was to reserve some space after the
environment strings and copy the bootinfo struct there.
Also, set RB_BOOTINFO, it's needed.
I got the code to load and run an unmolested kernel OK for the first time
with this system a few minutes ago - at last!. I did have to stop it
looking at the floppy though as BTX was trapping a mode 14 fault when
it look for /boot/boot.conf when no disk was in the drive. (I'm booting
from a scsi disk (bios disk 0x80)).
Now to teach it about ELF and modules :-)
1998-09-29 09:11:49 +00:00
0c71101cb7
Don't pretend to support ix86's with 16-bit ints by using longs just
...
to ensure 32-bit variables. Doing so broke ix86's with 64-bit longs.
1998-09-29 09:06:00 +00:00
9702cd0422
Fixed initialization of new inodes. ext2fs doesn't clear inodes when
...
they are deleted, so inodes must be cleared when they are reused, but
we didn't clear the indirect blocks. This caused serious filesystem
corruption.
1998-09-29 08:07:32 +00:00
5d20b9915f
Update to match newest XFree86 naming conventions.
1998-09-29 07:27:33 +00:00
8d74c4aa15
Several minor cleanups, inspired by bug reports and the old driver:
...
o Unlock mailbox interface if we have a new card. Before only newer cards
(B or newer) that had the BIOS disabled would probe. Cards with the
BIOS enabled would fail to probe in the mailbox initialization code.
o Increase the number of ccbs and sg to 17 from 16 to support 64k I/O
on a non page aligned boundary. Ideas for dynamic determination of this
value welcomed, as more of these are better.
o Took credit for this driver, even though I derived it from Justin's code.
Made sure that Justin's copyright from bt.c was preserved, along with
his name, since the error handling code is nearly identical. Add my
own, identical copyright. Point people to aha_isa.c.
Cards tested: 1542C and 1542CF. The B and CP might work now as well,
but logistical problems precluded me from testing them this evening
(if you have jumper settings for the B card, please send me private
mail).
1998-09-29 06:50:21 +00:00
7669e9013b
`kern.maxproc' is not changeable from sysctl(8).
...
Reminded by: Bruce Evans <bde@zeta.org.au>
1998-09-29 05:16:45 +00:00
919b0d127e
Always do fixups, even if some minor dist failed to install.
...
Noticed by: luigi
1998-09-29 05:12:39 +00:00
d15f150dfb
Try #2 with minigzip. Now that John Hay has made it behave more properly
...
like gzip, we should be able to use it here.
1998-09-29 04:58:17 +00:00
7998601706
Allow minigzip to be invoked more like gzip, checking to see
...
if we're being called as gunzip as well as dealing with the -c
flag.
Submitted by: jhay
1998-09-29 04:56:30 +00:00
81e30e2649
cosmetique - remove unneded static in previous commit
1998-09-29 04:11:35 +00:00
bb2691312e
workaround painful vm86_datacall requirement that segment+offset
...
must be withing the same PAGE frame
1998-09-29 04:09:39 +00:00
1c4d62951a
`kern.maxproc' is not changeable using sysctl(1). Change examples
...
that show `kern.maxproc' being written.
PR: docs/7978
Submitted by: jlemon@americantv.com
1998-09-29 02:01:06 +00:00
d4b2d02fc1
Fix destructive cursor shape after text mode switch.
...
This is only for standard modes, I don't check vesa modes yet.
1998-09-29 02:00:57 +00:00
4cbaceabf1
Mention default time between output flushes in manual page.
...
PR: docs/8009
Submitted by: Stefan Eggers <seggers@semyam.dinoco.de>
1998-09-29 01:49:49 +00:00
1504bb5cd9
Correct use of nonexistent `.SS' macro.
...
PR: docs/8039
Submitted by: Issei Hirayama <iss@mail.wbs.ne.jp>
1998-09-29 01:42:07 +00:00
6e3a3f387c
John Dyson approved of this solution; make vnode_pager_input_old set m->valid
1998-09-28 23:58:10 +00:00
74c6d86921
Add a section on vnode types. Mostly based on information supplied by
...
Terry Lambert <terry@lambert.org>
1998-09-28 23:36:35 +00:00
83eda2d885
fix handling more than one cards
...
Submitted by: "Sergey V.Dorokhov" <svd@kbtelecom.nalnet.ru>
1998-09-28 23:27:57 +00:00
abe7f210b5
The flags type was recently changed from u_short to u_int, breaking
...
icmptypes.
PR: 8067
Submitted by: Jonathan Hanna <jh@cr1003333-a.crdva1.bc.wave.home.com>
While I'm here, staticize functions.
1998-09-28 22:56:37 +00:00
38e1ef0f4a
Only bcopy the correct amount of data from the buffer in case it is ever
...
in an overrun situation.
1998-09-28 22:04:54 +00:00
29a1d9c4e6
Use the variable with the path in it for the error message.
1998-09-28 22:03:01 +00:00
699f872732
Reactivate the a.out kernel loader code.
1998-09-28 22:01:20 +00:00
3165db6cbf
Missing return value that was kinda important.
1998-09-28 21:59:21 +00:00
Kenneth D. Merry
Andrey A. Chernov
Jordan K. Hubbard
Alexander Langer
Kirk McKusick
Robert V. Baron
Dmitrij Tejblum
Mark Murray
Jonathan Lemon
David E. O'Brien
Andrzej Bialecki
Greg Lehey
Bruce Evans
Peter Wemm
Warner Losh
Joseph Koshy
Eivind Eklund