14ab095c9c
Fix typo.
...
PR: 8145
Submitted by: graaf@iae.nl
1998-10-04 19:07:22 +00:00
0276d282db
Add a symbol to aid in release debugging.
1998-10-04 17:37:52 +00:00
218b589a83
Don't print out a gratuitous null entry for name list.
1998-10-04 14:23:06 +00:00
4adf9b35b4
Update to reflect current driver situation in 3.0.
1998-10-04 13:48:14 +00:00
a51ecd7e6b
Collapse doRELEASE target back to being the same for alpha/i386 now
...
that unzip is fixed and we should hopefully be able to build the docs.
1998-10-04 10:33:41 +00:00
905b2b7a30
Add references to the 'cs' driver, minor formatting nit, metion PCI devices
...
can be reviewed in the visual Userconfig screen.
1998-10-04 06:58:56 +00:00
215eac6f83
Commit some more updates for the alpha release build. This may be
...
a bit ambitious for the moment, but the only way out is through! :)
1998-10-04 02:32:18 +00:00
380dfc0050
Don't write the fsimage in the kernel on alpha - the combined
...
kernel + fsimage is far too large to fit on a single floppy.
Copy it out for the later creation of a root floppy image instead.
1998-10-04 02:01:03 +00:00
1c61cf54dd
Whoops, correct brain-o.
1998-10-03 14:16:06 +00:00
b9dd246109
Add a tweak for the alpha.
1998-10-03 14:10:28 +00:00
4879f4d58a
Pass the '-n' flag to route(8) when setting up/tearing down the default
...
route. If your nameserver config is wrong, this will otherwise hang for
the default resolver timeout (75 seconds), leading people to think that
the system has hung.
1998-10-01 19:26:02 +00:00
c4da8a34e6
Urk!! At some point, CFLAGS got set to -O2 rather than -O (which
...
has always been our "recommended optimization flag") and this causes
problems on the Alpha in addition to being generally wrong.
Noticed by: dfr
1998-10-01 09:27:02 +00:00
767df892d7
One last alpha seat belt - never ask for an MBR boot manager.
1998-09-30 21:58:36 +00:00
b6d288b2c2
Add another check to prevent user from hanging themselves on alpha.
1998-09-30 21:55:33 +00:00
56d0e88cb4
remove keymap.h reference from incorrect location.
1998-09-30 21:51:15 +00:00
b5f2852c51
Always use dedicated disk case on alpha.
1998-09-30 21:48:11 +00:00
2fab62599d
Small cleanup.
1998-09-30 21:39:02 +00:00
b8ecd49e5a
Finally conditionalize the SCSI frobbing code properly. This
...
should return kernel config saving (under the current a.out system)
to its former functionality.
1998-09-30 20:54:34 +00:00
164cf414e8
More rearrangement for USE_SCSI
1998-09-30 20:51:01 +00:00
ec8c21cf11
More save_userconfig to a more appropriate spot.
1998-09-30 20:33:56 +00:00
ed4226cb46
Move variable into proper scope.
1998-09-30 19:37:46 +00:00
ef7b28dd0a
Simplify gunzip usage even more (doh!).
1998-09-30 13:36:53 +00:00
fb386e7c77
Fix english in prompt.
1998-09-30 12:33:28 +00:00
9bb1c20147
various bits of overdue cleanup.
1998-09-30 11:49:37 +00:00
35e9eb2f68
Call gunzip correctly.
1998-09-30 11:44:29 +00:00
3eba1a33e8
Fix typo in message.
1998-09-30 01:46:27 +00:00
50660db1a6
Add in a kludge for registering the "package" version of XFree86 so
...
various ports don't complain about it. It also requires that the pkg
registration bits be stick into the Xbin tarball so that they'll be
present in /usr/X11R6/lib/X11/pkgreg.tar.gz. The registration tarball
is removed upon first use to prevent it later spamming a genuine build
from ports if inadvertently extracted again.
1998-09-29 14:23:13 +00:00
416ad5ed31
Small update: you need to unpack the stand-alone picobsd tarball into
...
src/release/picobsd, otherwise it won't work.
Pointed out by: Randal Masutani <randal@comtest.com>
1998-09-29 12:23:58 +00:00
fa72cf69bf
Make proper use of ${suffix} instead of hardwired suffixes.
...
Pointed out by: Randal Masutani <randal@comtest.com>
1998-09-29 12:12:47 +00:00
648e989921
Better handling of "custom" setup.
...
Submitted by: Randal Masutani <randal@comtest.com>
1998-09-29 11:58:54 +00:00
09b41007d5
Once again turn off the BRIDGING - it's not yet ready to be the default...
...
Submitted by: Randal S. Masutani <randal@comtest.com>
1998-09-29 11:27:34 +00:00
5d20b9915f
Update to match newest XFree86 naming conventions.
1998-09-29 07:27:33 +00:00
919b0d127e
Always do fixups, even if some minor dist failed to install.
...
Noticed by: luigi
1998-09-29 05:12:39 +00:00
d15f150dfb
Try #2 with minigzip. Now that John Hay has made it behave more properly
...
like gzip, we should be able to use it here.
1998-09-29 04:58:17 +00:00
645944e19f
Quick update for AdvanSys cards. I *know* this file is going to need
...
more work.
1998-09-28 18:42:55 +00:00
2a686557ff
Nuke ft0 device on boot floppy also since we don't need it now.
1998-09-28 17:17:49 +00:00
3ff7fe3a7f
Update for 0.41.
1998-09-26 17:39:21 +00:00
4570b54689
Small rearrangements for a bugfix release 0.41.
1998-09-26 17:27:26 +00:00
7d854c9551
Move the documents to src/ so that using new version number is easier.
1998-09-26 17:23:01 +00:00
eb0ffee8a1
Remove support for floppy tape installs. I'm sorry, we're outta
...
space, and it's either this or the DOS installs. I think that the
DOS installs are somehow more important. :)
1998-09-26 17:05:08 +00:00
806ee0db0e
Turn off options BRIDGE and DUMMYNET again - there are still some pieces
...
missing. But I hope this will be ready before 3.0-R.
1998-09-24 16:39:55 +00:00
0f28f98cb8
Remove superfluous (and old) copies.
...
There are still many more things to clean up here...
1998-09-24 16:37:37 +00:00
737797e011
Add a note on the VESA support.
...
Delete the note on the -b boot option.
1998-09-24 13:11:08 +00:00
e2218b5c6b
Put MSDOSFS back - I'm going to try and find space another way.
1998-09-24 02:01:07 +00:00
6c40eec92b
Trim more stuff off the boot floppy - we're overflowing again! :(
...
Partially suggested by: abial
1998-09-24 00:57:05 +00:00
e178ac1edd
Update for ELF
...
Submitted by: abial
1998-09-23 16:00:07 +00:00
f926748009
Turn on support for bridging statistics.
1998-09-23 15:22:14 +00:00
a16a93cc98
Turn on support for bridging and b/w limiting.
1998-09-23 15:20:55 +00:00
fc0e233fe6
Correct comment in the "build" script about aout/ELF.
1998-09-23 14:54:46 +00:00
d6ee254e67
Hmm.. Looks like new ar(1) adds trailing '/' to each object's name...
1998-09-23 14:51:34 +00:00
bf05096f52
MF22: Important fixes for loading XFree86 distributions I forgot to
...
merge after 2.2.7 (I was wondering why that bug looked so familiar!).
Also update some docs accordingly.
1998-09-23 12:13:51 +00:00
ab5998ff85
Build the GENERIC kernel on the alpha too. And don't expect a MFS kernel
...
yet, nor will fbsdboot.exe be too useful :)
Reviewed by: jkh
1998-09-23 07:38:51 +00:00
7a6879ab8a
Fix proflibs again.
1998-09-23 03:58:41 +00:00
c8049b1810
Make this work when compiled ELF. The code assumed that when you go off
...
the table boundary you get NULLs, and this was true for a.out, but some
ELF-related gremlin fills it with 0xff instead...
I suspect there are more problems of this type left in the tree. :-(
1998-09-22 15:45:52 +00:00
5b4f3f484a
Add some more disk device nodes.
1998-09-22 15:41:05 +00:00
e6ef826b4d
All PicoBSD userland is now ELF. This buys us extra 15-30kB on the floppy.
...
NOTIE: If you don't use /usr/obj (or you wiped it), remember to clean also
the source tree of stale .depend and *.o files...
1998-09-22 15:40:00 +00:00
b0d5cda0b1
Allow the use of ${DESTDIR} in the enviroment to optionally get
...
these various collections to install someplace else.
1998-09-22 08:43:10 +00:00
1e3badb305
Revert my change to use minigzip. Apparently, this thing is too "mini"
...
to actually work in this application. Urk. This probably explains the
problems people have been having with installing -snap. My bad. Will
fix and upload a new beta snap to ftp.freebsd.org.
Noted by: jhay
1998-09-22 00:16:23 +00:00
5ce7941e37
Turn NODOC off again; now that releases are releasing again, it's time to
...
try and unbreak docs.
1998-09-20 08:52:23 +00:00
89f1cf1c51
Use system-wide MAKEDEV, instead of our own copy.
...
Suggested by: Ockham's razor
1998-09-20 00:52:34 +00:00
53cf34b16e
Hmm... Let's make the switch to non-DEVFS actually work. :-/
1998-09-20 00:46:27 +00:00
7162850184
Kill the remnants of DEVFS, since it's broken without the SLICE code...
...
Pity - it was _very_ handy.
This also required increasing of MFS size, so that PicoBSD consumes more
memory now...
1998-09-19 21:45:18 +00:00
bfec642338
Remove some dead code.
...
Obtained from: similar changes in sysinstall by jkh
1998-09-19 21:40:39 +00:00
bb6becfef1
Turn off ALLLANG; the docs are currently in spanish and none of the docs
...
folks seem to have worked out why yet, so I'm switching back to english
and only english by default for now. :)
1998-09-19 11:43:05 +00:00
c17109adb1
Try using minigzip instead of gzip; can't hurt!
1998-09-19 01:47:07 +00:00
f6538e2615
Remove defunct scsi command from fixit floppy.
...
Once I see how much room is available, I may add camcontrol in
its place.
1998-09-19 01:46:22 +00:00
5016aa537d
Temporary hacks to get releases working again:
...
o Remove MSDOSFS until I find some other way of gaining some space.
This *totally disables* the use of DOS partitions in installation
so it's truly just a temporary measure.
o Set NODOC=YES since docs are broken right now (they try and install
into the bindist rather than the docdist - need to figure out why).
1998-09-17 11:25:48 +00:00
0d4651753d
Make SCSI stuff truly optional.
...
Noticed by: jhay
1998-09-16 09:25:20 +00:00
1bf62d7dba
Add entries to describe CAM's new features.
1998-09-16 05:15:37 +00:00
cfba96d139
Translate some of the newer entries to english. :)
1998-09-15 21:45:14 +00:00
09d2770270
Mention /bin/sh fixes.
1998-09-15 14:06:54 +00:00
d6c7028c12
Comment out NODOC and NOPORTS again. It got uncommented by mistake a few
...
days ago.
1998-09-15 13:15:18 +00:00
3f8c45065e
(this is an extract from src/share/examples/atm/README)
...
===================================
HARP | Host ATM Research Platform
===================================
HARP 3
What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols. It is intended to
be a high-quality platform for IP/ATM research.
HARP provides a way for IP hosts to connect to ATM networks. It supports
standard methods of communication using IP over ATM. A host's standard IP
software sends and receives datagrams via a HARP ATM interface. HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.
HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM. HARP is
self-contained; it requires no other licenses or commercial software packages.
HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:
o IETF ATMARP address resolution client
o IETF ATMARP address resolution server
o IETF SCSP/ATMARP server
o UNI 3.1 and 3.0 signalling protocols
o Fore Systems's SPANS signalling protocol
What's supported
----------------
The following are supported by HARP 3:
o ATM Host Interfaces
- FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signalling Protocols
- The ATM Forum UNI 3.1 signalling protocol
- The ATM Forum UNI 3.0 signalling protocol
- The ATM Forum ILMI address registration
- FORE Systems's proprietary SPANS signalling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
- The file atm-sockets.txt contains further information
What's not supported
--------------------
The following major features of the above list are not currently supported:
o UNI point-to-multipoint support
o Driver support for Traffic Control/Quality of Service
o SPANS multicast and MPP support
o SPANS signalling using Efficient adapters
This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).
Reviewed (lightly) by: phk
Submitted by: Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
e2efbdd232
This server is not so non-forking as it seemed at first glance...
...
Submitted by: Jonathan H N Chin <jc254@newton.cam.ac.uk>
1998-09-15 11:17:07 +00:00
d687e84172
Update ucd-snmp to version 3.5. It's slightly bigger, so also increase
...
the MFS size of net and isp floppies.
Add comment to crunch.conf on how to prepare the ucd-snmp port to work
with the build process.
Submitted by: Jim Flowers <jflowers@ezo.net>
1998-09-15 11:12:25 +00:00
c39581f667
Device name cleanup for CAM.
1998-09-15 10:24:46 +00:00
51b863ea7f
We don't need the CAM application pass-thru driver on installation boot
...
floppies. Also kill the sense and command strings to save space.
1998-09-15 10:24:23 +00:00
7b98b31542
Change name of 'dm' to 'msg'. As Bruce noticed, it conflicts with
...
dungeon master, if anyone would like to play it on picobsd floppy... :-)
Noticed by: bde
1998-09-15 07:35:58 +00:00
3e032f2a0f
Document root.wheel.
1998-09-15 05:11:47 +00:00
a7b8849df2
Make use of the new 'dm' utility instead of standard 'dmesg'.
1998-09-14 20:39:34 +00:00
d6e5b04f99
Since we have a sysctl 'machdep.msgbuf' now, let's make use of it.
1998-09-14 20:33:43 +00:00
04f80d35bf
Fix printf warnings and add a few casts.
...
PR: 7560
Submitted by: Stefan Eggers <seggers@semyam.dinoco.de>
1998-09-14 19:14:11 +00:00
344e4a2733
Until lkm and mdec gets populated again by some other means, do it
...
here.
Forgotten by: jkh
Submitted by: jhay
1998-09-14 18:42:59 +00:00
80e2640f8d
Nuke gratuitous use of OBJFORMAT
...
Submitted by: jhay
1998-09-14 11:39:38 +00:00
3d9c8a5dae
Use -R argument to cvs, this lets us work with a read-only repository,
...
at least to the extent that cvs bugs allow us to.
1998-09-13 17:20:57 +00:00
a5be897656
Add device list entries for the tl and xl PCI ethernet devices.
1998-09-13 16:45:10 +00:00
92cb7663b8
Mention that Amd has been upgraded for 3.0.
1998-09-13 09:00:24 +00:00
e9291af748
Add the missing file, printf to a directory does not work.
1998-09-12 20:04:44 +00:00
e6e05668f7
Old bug that only showed up after we moved to elf.
1998-09-12 18:53:16 +00:00
f09d37e7ae
Add note about picobsd joining 3.0
1998-09-12 18:48:42 +00:00
dc5af0d5d4
Note the addition of pthread read/write locks and expansion of ipfw's
...
byte/packet counters to 64 bits.
1998-09-12 13:53:10 +00:00
74632b447e
Fix to properly newfs the MFS in case of custom setup. Mention this in docs.
...
Submitted by: Richard Wackerbarth <rkw@Dataplex.NET>
1998-09-11 13:14:33 +00:00
b88bb747a6
Note ELF, Perl5 and Atapi tape support.
1998-09-10 07:03:16 +00:00
1e91db9fc1
Mention some of the major changes to ppp for 3.0
...
Fix a typo.
1998-09-09 22:50:28 +00:00
2516ba970a
Remove perl5 from list of ports to build now that it's in the base system.
1998-09-09 14:20:22 +00:00
087572a597
Fix typos.
1998-09-09 05:09:55 +00:00
9e2594ff29
Some preliminary updates to the release notes, just as I think of
...
them. By no means a comprehensive list of all the things which should
eventually go in here before 3.0-RELEASE, nor are the CAM issues
reflected here yet.
1998-09-09 03:37:00 +00:00
9f82b53c95
Update the diffs against current source + some other cleanup.
1998-09-08 12:47:35 +00:00
5d7e166f85
Whoops, update the makefile too while I'm at it.
1998-09-08 11:44:37 +00:00
dac9272725
Go back to using MSDOSFS instead of Robert Nordier's stand-alone DOS
...
library. I have to include MSDOSFS on the boot floppy anyway (so I can
read DOS floppies in a few other contexts) and since both -stable and
-current MSDOSFS handle long filenames, I'm OK on that now. Should
save about 10K of space.
1998-09-08 11:44:08 +00:00
aa75b0b778
Make totally sure that we have the latest 1.7 version of booteasy
...
(it looked like it already to me, but the PR gives me cause to wonder).
PR: 2514
1998-09-08 10:46:40 +00:00
37877c0650
Add info on PicoBSD being a part of FreeBSD source tree.
1998-09-08 06:35:43 +00:00
b18449d30d
Sync help files with actual contents of "dial" floppy.
1998-09-08 06:04:41 +00:00
6b94cd72da
Do an installworld rather than install to populate the chroot tree.
...
Recommended by: jb
1998-09-07 23:55:22 +00:00
6c88a1f638
Change the way the help files are stored, and save ca. 30kB on the
...
"dial" floppy.
Submitted by: Eric P. Scott <eps@sirius.com>
1998-09-07 19:00:34 +00:00
771383c4b3
Set the ${suffix} only once...
1998-09-07 06:46:25 +00:00
1bd2addb75
* Add code to display statistics continuously, every some seconds.
...
* Fix a number of mem leaks.
* Update README.
Submitted by: Luigi Rizzo <luigi@iet.unipi.it>
1998-09-07 06:41:14 +00:00
a4abb1d062
Set CHROOTDIR's initial object type also.
...
Suggested by: jb
1998-09-05 07:43:13 +00:00
0f31af3165
Add OBJFORMAT to list of variables passed into /mk script since it seems
...
to think you're using aout otherwise (and emits a rather confusing and
inaccurate diagnostic about OBJFORMAT being set in /etc/make.conf when
it most demonstrably is not set there).
1998-09-05 06:54:42 +00:00
adae65a188
Escape the \ characters so that the intended beep at the end of the
...
boot.help message is actually appended correctly.
1998-09-05 00:36:18 +00:00
92050c8b15
Actually *looking* at this file now, I see that a good deal more
...
can be eliminated. :)
1998-09-04 23:51:40 +00:00
c039505459
Bring the docs more up-to-date. Document the 'custom' setup.
1998-09-04 19:47:24 +00:00
c7b3a66f65
Added special type of setup called 'custom'. It allows you to supply
...
your own config directory laid out exactly like the standard ones.
Suggested by: Richard Wackerbarth <rkw@dataplex.net>
1998-09-04 19:38:57 +00:00
d9c273e9c4
Just nuke the aout bootstrap stuff since we don't need it anymore.
...
Simplify accordingly for ELF.
Convinced by: jb
1998-09-04 08:22:59 +00:00
856306b2f9
Set OBJFORMAT=aout to affect the whole build - for now, it seems that too
...
many tools needed to build the floppies are dependent on a.out...
1998-09-04 08:08:05 +00:00
e8341fd0d4
Only move a.out libs if we're building for a.out.
1998-09-04 06:31:34 +00:00
bccec1d693
Added Makefile to have true dependency of kernel image on the kernel
...
config file.
1998-09-03 10:41:36 +00:00
d3f8852a1b
Minor fixes to 'clean' script.
...
Changed the 'build' script to use ../${TYPE}/conf/Makefile in order to
have true dependency of kernel image on the kernel config file.
1998-09-03 10:40:27 +00:00
4805acd6f2
Set OBJFORMAT=aout, until crunchide learns about ELF format...
1998-09-03 10:16:03 +00:00
0d59b5e22c
Add ^G to the end of boot.help on the installation floppy so that it
...
beeps when the Boot: prompt appears on the screen and people installing
FreeBSD onto PC without display monitor can tell when to hit `-h'.
1998-09-02 18:04:18 +00:00
58325806f4
Add options for bridging and bandwidth limiting (disabled by default).
...
Submitted by: Luigi Rizzo <luigi@iet.unipi.it>
1998-09-02 14:16:07 +00:00
f52f05009b
Ugh... Small correction to the previous commit.
...
_Now_ it compiles on 2.2.7...
1998-09-02 13:11:23 +00:00
2effb4d0f5
Added code to display interface table and link layer info, as well
...
as bridging statistics when using Luigi's bridging code.
Also added some ifdef's to (hopefully) get it to compile under 2.2.x
Submitted by: Luigi Rizzo <luigi@iet.unipi.it>
1998-09-02 11:48:07 +00:00
2086027352
Put MSDOSFS back and look for something else to trim.
1998-09-01 06:57:18 +00:00
119cff04ef
Don't set the router_enable variable by default.
1998-08-31 17:47:52 +00:00
d238f54044
init.ee was being copied to wrong place.
...
Submitted by: Eric P. Scott <eps@sirius.com>
1998-08-31 13:39:01 +00:00
c6e41959d6
Add HOME variable to environment.
...
Submitted by: Eric P. Scott <eps@sirius.com>
1998-08-31 13:36:43 +00:00
1cc627a8e0
Remove some mysterious passwords (they are not used here anyway).
...
Submitted by: Eric P. Scott <eps@sirius.com>
1998-08-31 13:36:24 +00:00
8a8ace1c23
Add link gzip -> gzcat
...
Submitted by: Eric P. Scott <eps@sirius.com>
1998-08-31 13:35:39 +00:00
b0dcafa983
Remove CVS directories from the target floppy.
...
Submitted by: Eric P. Scott <eps@sirius.com>
1998-08-31 13:35:06 +00:00
9ba61eac9d
We need only one device entry for PCI eth. cards.
...
Submitted by: Luigi Rizzo <luigi@iet.unipi.it>
1998-08-31 13:21:45 +00:00
94a87eb41a
Oops.. Forgot to add the Makefile
...
Submitted by: Jim Flowers <jflowers@ezo.net>
1998-08-31 13:10:25 +00:00
2bbb4d132b
Corrections and additions to FAQ.
1998-08-31 13:08:16 +00:00
8856617191
The file /README mentioned here doesn't exist. Don't mention it.
...
Submitted by: Jim Flowers <jflowers@ezo.net>
1998-08-31 12:50:31 +00:00
3df8e17a55
Clean leftovers from localization of help files.
1998-08-31 12:45:47 +00:00
6ccd368bfb
We no longer need /proc dir, but we need /root...
...
Submitted by: Eric P. Scott <eps@sirius.com>
1998-08-31 12:32:30 +00:00
0a4f14db2a
Better explanation of CONFlict between sc0 and psm0.
...
Submitted by: Eric P. Scott <eps@sirius.com>
1998-08-31 12:28:39 +00:00
87757a15d3
Accept gateway value of NO
1998-08-31 09:02:03 +00:00
839de40e6e
BINFORMAT -> OBJFORMAT ready for E-day.
1998-08-30 02:52:04 +00:00
0ef592f90e
Oops... We don't need threee copies of them.. :-(
1998-08-28 08:58:19 +00:00
c3eb4537ba
Obtain the mib files from ../../net/crunch1/mibs.
1998-08-28 08:57:16 +00:00
78c5c44b8f
Sync with on-line versions.
1998-08-28 08:55:53 +00:00
ccee8446a8
Add /usr/lib to the list of things to chflag before upgrading.
...
Noticed by: Blaz Zupan <blaz@gold.amis.net>
1998-08-28 01:03:41 +00:00
c9d8fd0a7b
Initial import of PicoBSD v0.4 tree.
1998-08-27 17:38:45 +00:00
0fc1c5c44a
Catch more cases where the CDROM has been mounted.
1998-08-27 00:50:14 +00:00
bdad325c19
First cut (aka hack) at getting make release building on the alpha. Don't
...
build floppies or kernels. The i386 release process should be unaffected.
1998-08-23 00:52:18 +00:00
9bcd379541
Mention XL driver and that 3c905B cards are now supported. Also add
...
xl entry to the interfaces config table.
1998-08-16 17:17:46 +00:00
c897be411b
Mention that XL driver and that 3c905B cards are not supported.
1998-08-16 17:16:07 +00:00
48f1b394ea
Make provisions for a pre-build script that one can use to frob the
...
chroot tree right after everything has been checked out and we're ready
to go.
1998-08-16 01:24:40 +00:00
5e95012499
Add BINFORMAT awareness.
1998-08-16 00:57:08 +00:00
Jordan K. Hubbard
Mike Smith
Daniel O'Callaghan
Andrzej Bialecki
Søren Schmidt
Gary Palmer
Martin Cracauer
John Hay
Poul-Henning Kamp
Justin T. Gibbs
David E. O'Brien
Bill Paul
Alexander Langer
Brian Somers
Masafumi Max NAKANE
John Birrell