cleaning up some of the vnode usage..
(I'm sure it still needs more..)
where can one find out what each vfs call expects to be locked
on completion, and how can one find out what each layer expects
to be freed on error.?
it only barely works so don't get too carried away..
I noticed that teh symlink is length 0..
I guess I'll fix that tomorrow..
it also sometimes panics with "cleaned vnode isn't" but it's not more
broken than it was before.. I really want to go over it with someone
who understands the lifecycle of a vnode better than I do..
terry?
kirk?
david?
john?
. preserve a multi-char sequence in a small static buffer inside
pccngetc(), so it won't be clobbered later (used to happen when
breaking into DDB user Ctrl-Alt-ESC), and
. simplify the ``keystroke is present'' determination in sgetc(), thus
making pccncheck() actually working without waiting for a keystroke.
for work regardless of whether there was an interrupt. This needs more
work, it should be able to run better when there are more than 3 host
cards present, ie: all cards in polling-only mode with no IRQ. (The
host cards have a choice of 3 irq's, 11, 12, or 15, or just polling)
IPPORT_RESERVED that is used for selection when bind() is told to allocate
a reserved port.
Also, implement simple sanity checking for all the addresses set, to make
it a little harder for a user/sysadmin to shoot themselves in the feet.
little more reliably. So far I've received a couple of positive
responses and no objections to these changes.
There are two one-line changes:
- In wdprobe(), when testing the error status of drives, don't
unconditionally decide that there is no controller present if we
read back a value of 0x81 (drive 0 okay, drive 1 failed) twice
in a row. This may be caused by having an ATAPI CD-ROM jumpered
as a master on the controller with no slave.
- In wdgetctlr(), when checking for a status of WDCS_READY, check the
value twice. The first time may be bogus. This stops a phantom wd2
device from being detected when an ATAPI CD-ROM is attached to the
secondary controller alone as a slave. (This can cause installation to
fail when sysinstall attempts to open the phantom device and wedges the
system as a result. This has bitten me a couple of times on some
Gateway 2000 machines.)
. make pccncheck() work even when interrupts are disabled, so the
``Press a key on the console...'' procedure will work,
. make kernel colors #ifndef, so they can be overridden from the
config file,
. use shutdown_nice() instead of cpu_reset() if Ctrl-Alt-Del is
enabled,
. allow pccngetc() to return more than a single character, so the
arrow keys will work (and thus visual UserConfig!),
. fix a warning.
This closes all know PRs related to pcvt, in particular #845, #1236,
and #1265. PR #991 is a duplicate for 845, and PR #1283 has already
been fixed earlier in rev 1.11 of pcvt_conf.h.
Submitted by: Ulf Kieber (kieber@sax.de), for the kernel color fix
Emacs-style line editing has already been there (did anybody ever
notice this? :), so i `only' had to add ^P and ^N. The approach is
fairly minimalistic, with the advantage of keeping the bloat as small
as 864 bytes of .text and 16 bytes of .bss, plus 10*120 bytes
malloc'ed history buffer at the first use.
nearest .01 Mhz rather than simply truncating it downwards.
This hack makes this 89.999928 Mhz clock correctly round to the closer
90.00-MHz rather than 89.99-MHz:
> i586 clock: 89999928 Hz, i8254 clock: 1193152 Hz
> CPU: Pentium (90.00-MHz 586-class CPU)
allow a tunnel interface to be openned even if it has no remote address yet.
this may be needed if you have used
route add default -interface tun0
where the remote end might not even HAVE a number (e.g. netcom links)
This is a patch to sys/net/if.c. What it does is patch the algorithm
for finding an IP address on an interface which most closely matches
a given IP address. The problem with it is when no address matches,
and you have to just pick one at random. Then the code ends up picking
the last IP address in the list. This patch changes things so it
picks up the first address instead.
Usually the first address is more useful as the later ones are aliases.
buffer in certain error conditions. Sync up the code to that in NetBSD
where applicable.
Reviewed by: Gary Jennejohn <garyj@munich.netsurf.de>
Submitted by: Michael Smith <msmith@atrad.adelaide.edu.au>
Obtained from: NetBSD sources
Changed i586_ctr_bias from long long to u_int. Only the low 32 bits
are used now that microtime uses a multiplication to do the scaling.
Previously the high 32 bits had to match those of rdtsc() to prevent
overflow traps and invalid timeval adjustments.
block number.. (assuming Debugger() returned). The disk drivers assume
that dscheck() sets both error markers (bp->b_error and set B_ERROR in
bp->b_flags) if it fails.
does) before calling dscheck(). dscheck() doesn't appreciate this and
calls Debugger() and returns without setting bp->b_error.
This can happen when there is a casting error and offsets > 2G are
converted to negative off_t's in the disk tools. (dumpfs used to do this).
early enough when the dump device is specified in the config file.
Removed stale comment about configuration root and swap devices.
Don't bother clearing dumplo when dumpdev is set to NODEV. Everything
is controlled by dumpdev.
Fixed the kern.dumpdev sysctl. Writes were handle bogusly.
interfaces. This creates two new tables in the net.link.generic branch
of the MIB; one contains (essentially) `ifdata' structures, and the other
contains a blob provided by the interface (and presumably used to
implement link-layer-specific MIB variables). A number of things
have been moved around in the `ifnet' and `ifdata' structures, so
NEW VERSIONS OF ifconfig(8) AND routed(8) ARE REQUIRED. (A simple
recompile is all that's necessary.)
I have a sample program which uses this interface for those interested
in making use of it.
problem with the 'shell scripts' was found, but there was a 'strange'
problem found with a 486 laptop that we could not find. This commit
backs the code back to 25-jul, and will be re-entered after the snapshot
in smaller (more easily tested) chunks.
is little or no reason to create a swap pager for small mmap's. The
vm_map_insert code will automatically create a swap pager if the object
becomes too large. This fix, per a request from phk.
and then never accept for sending packet from upper layer anymore
(i.e. ping -f )
Reviewed by: David Greenman <dg@root.com>
Submitted by: amurai@spec.co.jp
performance issues.
1) The pmap module has had too many inlines, and so the
object file is simply bigger than it needs to be.
Some common code is also merged into subroutines.
2) Removal of some *evil* PHYS_TO_VM_PAGE macro calls.
Unfortunately, a few have needed to be added also.
The removal caused the need for more vm_page_lookups.
I added lookup hints to minimize the need for the
page table lookup operations.
3) Removal of some bogus performance improvements, that
mostly made the code more complex (tracking individual
page table page updates unnecessarily). Those improvements
actually hurt 386 processors perf (not that people who
worry about perf use 386 processors anymore :-)).
4) Changed pv queue manipulations/structures to be TAILQ's.
5) The pv queue code has had some performance problems since
day one. Some significant scalability issues are resolved
by threading the pv entries from the pmap AND the physical
address instead of just the physical address. This makes
certain pmap operations run much faster. This does
not affect most micro-benchmarks, but should help loaded system
performance *significantly*. DG helped and came up with most
of the solution for this one.
6) Most if not all pmap bit operations follow the pattern:
pmap_test_bit();
pmap_clear_bit();
That made for twice the necessary pv list traversal. The
pmap interface now supports only pmap_tc_bit type operations:
pmap_[test/clear]_modified, pmap_[test/clear]_referenced.
Additionally, the modified routine now takes a vm_page_t arg
instead of a phys address. This eliminates a PHYS_TO_VM_PAGE
operation.
7) Several rewrites of routines that contain redundant code to
use common routines, so that there is a greater likelihood of
keeping the cache footprint smaller.
blocked in a write() while waiting for the output to drain, sleep only
for tp->t_timeout, not forever. This only seems to happen when there is
either a modem lockup holding the hardware flow control down, or due to
some problem in the driver with processes attempting to write after the
modem has hung up (eg: elm, tf).
when attepmting to add certain types of routes. This problem
only manifested itself in the presence of unconfigured point-to-point
interfaces.
Noticed by: Chuck Cranor <chuck@maria.wustl.edu>
Saves about 280 butes of source per driver, 56 bytes in object size
and another 56 bytes moves from data to bss.
No functional change intended nor expected.
GENERIC should be about one k smaller now :-)
The old system had the misfeature that the only policy it could implement
was tail-drop; the new IF_ENQ_DROP macro/function makes it possible
to implement more sophisticated queueing policies on a system-wide
basis. No code actually uses this yet (although on my machine
I have converted the ethernet and (polled) loopback to use it).
#ifdef DIAGNOSTIC case, and a warning only otherwise.
People who want them to break into the debugger can always set the
breakpoint explicitly. The existing behaviour was a misfeature from
the beginning, in the (wrong) assumption that the SCSI controller must
always be of essential importance to the entire system.
make it more intelligible, improve the partially bogus locking, and
allow for a ``quick re-acquiration'' from a pending release of timer 0
that happened ``recently'', so it was not processed yet by clkintr().
This latter modification now finally allows to play XBoing over
pcaudio without losing sounds or getting complaints. ;-) (XBoing
opens/writes/closes the sound device all over the day.)
Correct locking for sysbeep().
Extensively (:-) reviewed by: bde
of this patch, which had not actually been reviewed by Joerg or Paul!
(I'll better stop committing files after midnight ...)
I'm now commiting the latest code, which has been reported to work.
Minor correction to the previous commit message for this file:
The first PCI Lance in a system will get a name of lnc1, the second
will be known as lnc2 and so on. An arbitrary number of cards is
supported in a system ...
Julian Elischer
Paul Traina
Joerg Wunsch
Garrett Wollman
Andrey A. Chernov
Peter Wemm
Bill Paul
David Greenman
Poul-Henning Kamp
Nate Williams
Stefan Eßer
Alexander Langer
Wolfram Schneider
Bruce Evans
Satoshi Asami
John Dyson
Atsushi Murai