entry when handling a fault. This is set by procfs whenever it wants
to write to a page, as a means of overriding `r-x COW' entries, but
causes failures in the `rwx' case.
Submitted by: bde
large (over 4KB) softc struct. The descriptor array is accessed by
busmaster dma and must be physically contiguous in memory. malloc() of
a block greater than a page is only virtually contiguous, and not
necessarily physically contigious.
contigmalloc() could do this, but that is a bit on the overkill side.
I'm not sure of the origins of the problem report and diagnosis, I learned
of the problem via mail forwarded from Jim Shankland <jas@flyingfox.com>.
Jim said that Matt Thomas's workaround was to reduce the number of
transmit descriptors from 128 to 32, but I was concerned that it might
cost performance. Anyway, this change is my fault, not Jim's. :-)
Reviewed by: davidg
local filesystem metadata at the first brelse call when the
block device vnode has v_tag set to VT_NFS.
Reviewed by: phk
Submitted by: Tor Egge <tegge@idi.ntnu.no>
PR: 4486
Submitted by: tegge@idi.ntnu.no (Tor Egge)
Implement a function is_adapter_memory() in order to determine what
should nto be dumped at all. Currently, only populated with the ``ISA
memory hole''. Adapter regions of other busses should be added.
you don't want this (and the documentation explains why), but if you
use ipfw as an as-needed casual filter as needed which normally runs as
'allow all' then having the kernel and /sbin/ipfw get out of sync is a
*MAJOR* pain in the behind.
PR: 4141
Submitted by: Heikki Suonsivu <hsu@mail.clinet.fi>
This code has been submitted by Luigi Rizzo <luigi@labinfo.iet.unipi.it>,
based on work done by Sujal Patel.
This currnetly doesn't provide the ability to register the port address
of PnP cards assigned a PnP driver. As there aren't any PnP capible
drivers yet, this isn't much of a problem.
The code allows you, through USERCONFIG, configure what the cards port
bases, irqs, and dma's are like. Currently there isn't support to view
what cards are in the sytem.
It successfully configures my PnP Internal Modem and sio then sees the
card as a normal isa device.
man page will be committed shortly.
Approved-by: jkh
Submitted-by: Luigi Rizzo
delay that without this the performance is unacceptable. The 83C690,
83C790, and 83C795 chips which this affects are all designed to work
with 0 waitstates in 16bit mode.
Also cleaned up the toggling of 16bit access mode that occurs during
normal operation; the previous code may not have done the right thing
in all cases.
mode, the slash is a comment leader, while under non-elf it is a divide
symbol (what a concept! :-). Theoretically, #APP/#NO_APP can change this
but that doesn't seem to mesh too well with macros and line continuation.
declaration macros so that a semicolon can be added when the macros
are invoked without giving a (pedantic) syntax error. Invocations
need to be followed by a semicolon so that programs like indent and
gtags don't get confused.
Fixed the one invocation that wasn't followed by a trailing semicolon.
while waiting for an interrupt (rather than spinning on the runqueue status
bits), since the other cpu can put stuff in there and the sleeping cpu may
not get an interrupt for a while. When we have a reschedule IPI, this can
come back.
Pointed out by: fsmp
size in terms of lines (instead of bytes). When changing video mode
in ioctl SW_XXX commands, syscons checks scp->history_size and
allocate a history buffer at least as large as the new screen size.
(This was unnecessary before, because HISTORY_SIZE was as large as 100
lines and this is bigger than the maximum screen size: 60 lines).
Similar adjustment is done in ioctl CONS_HISTORY command too.
PR: kern/4169
Reviewed by: sos
* lots of fixes to error handling-- mostly works now
* improve DMA timing config for Triton chipsets-- PIIX4 and UDMA drive
still untested
* generally improve DMA config in many ways-- mostly cleanup
* clean up boot-time messages
* rewrite PRD generation algorithm
* first wd timeout is now longer, to handle drive spinup
Submitted by: John Hood <cgull@smoke.marlboro.vt.us>
since that might cause in_pcballoc to call MALLOC with M_WAITOK during
a software interrupt.
Reviewed by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
are met:
1) The BIOS indicates that there is exactly 64MB of RAM, and
2) The memory size isn't specified with the MAXMEM option or
the npx0 msize hack,
...then do a speculative memory probe beyond the 64MB's until the
first bad page is encountered. This is an admitted hack, but should
nonetheless deal with detecting the correct amount of memory in nearly
all of the modern systems with >64MB of RAM.
Also made a change that will cause the list of detected memory chunks
to be printed if bootverbose is set.
2) Added a non_blocking flag to the write routine.
3) Added a 3rd buffer (actually a ring buffer would be better)
Submitted by: Jim Lowe <james@miller.cs.uwm.edu>
Includers of this file apparently didn't know that <sys/queue.h>
was a prerequisite and include a semi-random collection headers
until one happened to include it.
could cause a solid system lockup in the driver attach:
These chips do not abort an access to the internal SRAM, when
the driver set the software reset bit in the istat register. But
the chip will never acknowledge the requested PCI bus transfer
in the situation, causing an infinite wait and a lockout of other
bus-masters.
The problem has been reported for rev 0x11 of the 53c825a and
rev 0x01 of the 53c875.
Revisions 0x13 of the 53c825a and 0x03 of the 53c875 are known
to support SRAM accesses, even in the software reset state.
Introduce VFREE which indicates that vnode is on freelist.
Rename vholdrele() to vdrop().
Create vfree() and vbusy() to add/delete vnode from freelist.
Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0)
vnodes off the freelist.
Generalize vhold()/v_holdcnt to mean "do not recycle".
Fix reassignbuf()s lack of use of vhold().
Use vhold() instead of checking v_cache_src list.
Remove vtouch(), the vnodes are always vget'ed soon enough
after for it to have any measuable effect.
Add sysctl debug.freevnodes to keep track of things.
Move cache_purge() up in getnewvnodes to avoid race.
Decrement v_usecount after VOP_INACTIVE(), put a vhold() on
it during VOP_INACTIVE()
Unmacroize vhold()/vdrop()
Print out VDOOMED and VFREE flags (XXX: should use %b)
Reviewed by: dyson
holding CPU along with the lock. When a CPU fails to get the lock
it compares its own id to the holder id. If they are the same it
panic()s, as simple locks are binary, and this would cause a deadlock.
Controlled by smptests.h: SL_DEBUG, ON by default.
Some minor cleanup.
and hardware.
There is now another simple_lock around clock data/hardware accesses in
clock.c and microtime.s. It is my belief that this is the only area
sio/cy might stumble into during an unblocked INTerrupt. Thus I separated
the sio/cy code from the generic disable_intr()/enable_intr() routines.
Controlled by smptests.h: USE_COMLOCK, ON by default.
allowed to choose the address, or that the MAP_FIXED address has the same
remainder when modulo PAGE_SIZE as the file offset. Apparently this is
posix1003.1b specified behavior. SVR4 and the other *BSD's allow it too.
It costs us nothing to support and means we don't get EINVAL on some mmap
code that works perfectly elsewhere.
Obtained from: NetBSD
Add a simplelock to deal with disable_intr()/enable_intr() as used in UP kernel.
UP kernel expects that this is enough to guarantee exclusive access to
regions of code bracketed by these 2 functions.
Add a simplelock to bracket clock accesses in clock.c: clock_lock.
Help from: Bruce Evans <bde@zeta.org.au>
Remove unused headers.
Remove all but one instance of the device base name.
Prototype some local static functions.
Consistently reference the softc structure as "sc" rather than "lpt".
Prompted-by: bde
and the sound driver which uses auto dma.
The dma interface functionality remains however it now checks
to see if a dma is operating in auto dma mode and if so it bypasses
the busy flag check . I have modified the sound driver 3.5 to
adjust for this new behavior and tested it under FreeBSD 3.0 -current
This patch also includes the new function isa_dmastop.
Submitted by: Amancio Hasty <hasty@rah.star-gate.com>
by a protocol, to detirmine if an address matches the net this address
is part of. This is needed by protocols for which netmasks
"just don't work", for example appletalk.
Also add the code in appletalk to make use of this new feature.
Thsi fixes one of the longest standing bugs in appletalk.
The inability to talk to machines to which the path is via a router
which is on a different net, but the same netrange, as your interface.
Protocols that do not supply this function (e.g. IP) should not be affected.
smp_active = 1 used to indicate that the system had frozen previously
started AP's, while smp_active = 0 was "AP's not yet started". I have split
this into smp_started (which is set when the AP's come online), and
smp_active is left for turning on/off AP scheduling.
- We now have enough per-cpu idle context, the real idle loop has been
revived (cpu's halt now with nothing to do).
- Some preliminary support for running some operations outside the
global lock (eg: zeroing "free but not yet zeroed pages") is present
but appears to cause problems. Off by default.
- the smp_active sysctl now behaves differently. It's merely a 'true/false'
option. Setting smp_active to zero causes the AP's to halt in the idle
loop and stop scheduling processes.
- bootstrap is a lot safer. Instead of sharing a statically compiled in
stack a number of times (which has caused lots of problems) and then
abandoning it, we use the idle context to boot the AP's directly. This
should help >2 cpu support since the bootlock stuff was in doubt.
- print physical apic id in traps.. helps identify private pages getting
out of sync. (You don't want to know how much hair I tore out with this!)
More cleanup to follow, this is more of a checkpoint than a
'finished' thing.
This unifies several times in theory indentical 50 lines of code.
The filesystems have a new method: vop_cachedlookup, which is the
meat of the lookup, and use vfs_cache_lookup() for their vop_lookup
method. vfs_cache_lookup() will check the namecache and pass on
to the vop_cachedlookup method in case of a miss.
It's still the task of the individual filesystems to populate the
namecache with cache_enter().
Filesystems that do not use the namecache will just provide the
vop_lookup method as usual.
irqs can't work (at best, the first one attached wins). It used to
be necessary to skip this check because of bogus irqs in the sound
drivers, but the sound drivers have been fixed, except possibly the
OSS ones.
arg of type u_short (just write the function in ANSI C like most
other functions in this file instead of fixing the interface or
depending on a gcc feature).
vm_inherit_t. These types are smaller than ints, so the prototypes
should have used the promoted type (int) to match the old-style function
definitions. They use just vm_prot_t and/or vm_inherit_t. This depends
on gcc features to work. I fixed the definitions since this is easiest.
The correct fix may be to change the small types to u_int, to optimize
for time instead of space.
wasted.
Fixed type mismatches for functions with vm_prot_t's as args. vm_prot_t
is u_char, so the prototypes should have used promoteof(u_char) to match
the old-style function definitions. They use just vm_prot_t. This depends
on gcc features to work. I fixed the definitions since this is easiest.
The correct fix may be to change vm_prot_t to u_int, to optimize for time
instead of space.
Removed a stale comment.
potential problems with other automatic-reply ICMPs, but some of them may
depend on broadcast/multicast to operate. (This code can simply be
moved to the `reflect' label to generalize it.)
Added a new variable, 'bsp_apic_ready', which is set as soon as the bootstrap
CPU has initialized its local APIC. Conditionalize the GENSPLR functions
to call ss_lock ONLY after bsp_apic_ready is TRUE; This should prevent
any problems with races between the time the 1st AP becomes ready and the
time smp_active is set.
doclusterread/doclusterwrite into ext2_doclusterread and
ext2_doclusterwrite, which are unique names. Moved #include of
<sys/sysctl.h> to the top of the file.
Pointed out by: Bruce Evans <bde@zeta.org.au>
region protected by the simplelock 'cpl_lock'.
Notes:
- this code is currently controlled on a section by section basis with
defines in machine/param.h. All sections are currently enabled.
- this code is not as clean as I would like, but that can wait till later.
- the "giant lock" still surrounds most instances of this "cpl region".
I still have to do the code that arbitrates setting cpl between the
top and bottom halves of the kernel.
- the possibility of deadlock exists, I am committing the code at this
point so as to exercise it and detect any such cases B4 the "giant lock"
is removed.
- Do not malloc SCRIPTS memory for those parts of the microcode that
are to be loaded into the on-chip SRAM of the 53c825a or 875 ...
- Modify ncr_chip_lookup to make adding new entries easier.
- Disable use of on-chip SRAM for the 53c825 rev 0x10 to 0x12, since
there seems to be a problem with rev 0x11, while 0x13 is known to
work. (Tested by Chuck Robey <chuckr@glue.umd.edu>).
This code will be merged into 2.2-stable after a few more days of
testing in -current.
free list problem. Also, the vnode age flag is no longer used by the
vnode pager. (It is actually incorrect to use then.) Constructive
feedback welcome -- just be kind.
pause before attempting to reset the sequencer address. Remove the
loop checking to see if the address has gone to zero since it is
unnecessary
Adjust the abort SCB timeouts back up to 2 seconds where they should
be.
Fix an oversight in the removal of the bus reset settle code where
we might not run the queue of completed commands.
Remove an unecessary call to ahc_run_done_queue in ahc_reset_current_bus.
Submitted by: Tor Egge <Tor.Egge@idi.ntnu.no>