2887f586f0
Remove useless `BINOWN=root' now that it is the default.
1998-09-19 22:42:14 +00:00
68b414d193
Revert SEE ALSO ordering to version 1.124
...
Patched correctly by: wosch
Blunder pointed out by: bde
1998-09-18 23:28:10 +00:00
1595bacdf6
Sync with OpenBSD ifdefs
1998-09-17 00:45:27 +00:00
0122d745f5
Alphabeticalize SEE ALSO section.
1998-09-17 00:45:12 +00:00
426281551d
Correct ua_ntohs.
1998-09-15 17:22:20 +00:00
e9af5a192a
Reflect reality
1998-09-09 22:51:49 +00:00
7ac9884afe
Initialise lcp::his_mru to the ``set mtu'' value if it's less
...
than DEF_MRU, allowing our interface mtu to be decreased
despite negotiation with the peer.
1998-09-09 00:03:09 +00:00
9e8ec64b6b
Don't cast potentially unaligned addresses to pointers to
...
non-char types on non-i386 architectures.
On Alpha and Sparc we get a bus error if we do.
1998-09-04 18:26:00 +00:00
acd8019083
Sort cross references.
1998-08-31 16:41:09 +00:00
c9a426e9e1
Remove OpenBSD build support - let the Makefile vary per
...
OS rather than making it a mess and potentially screwing
up cross builds.
Suggested by: bde
1998-08-31 12:14:32 +00:00
e8ede338eb
Add OpenBSD build support
1998-08-30 23:53:25 +00:00
a804ec2201
Don't use ``-width 20'', it's misleading. Use ``-width XX''
...
instead.
1998-08-29 23:02:45 +00:00
7fdd475323
Don't claim that the alias library isn't loaded until
...
used.
1998-08-29 23:02:43 +00:00
131ef891c7
Add the following word substitutions when running a shell
...
command:
AUTHNAME: The local authname
ENDDISC: The local endpoint discriminator
LABEL: The configuration label in use
PEER_ENDDISC: The peers endpoint discriminator
USER: The peers authname
1998-08-29 23:02:42 +00:00
080a2247c2
Allow the use of HISADDR, MYADDR and INTERFACE as words
...
embedded in the args of a "shell" or "!bg" command, and
only accept upper case versions.
We can now do:
! sh -c "ifconfig INTERFACE >/tmp/myfile"
1998-08-29 23:02:39 +00:00
e227fded3f
Mention ``cbcp'' in ``set log ?''
1998-08-29 18:37:02 +00:00
37d818fb21
Fix some OpenBSD/alpha warnings
1998-08-26 18:07:57 +00:00
653ead3365
Remove redundant include file.
1998-08-26 17:39:38 +00:00
5a72b6eda3
Put the IP buffer queues into struct ipcp.
...
Forgotten by: me
1998-08-26 17:39:37 +00:00
4a7a066106
The protocol must be in network byte order (OpenBSD only).
1998-08-26 17:39:35 +00:00
f80e09b53a
Mention what ``set authname'' does in -direct mode.
1998-08-25 17:48:55 +00:00
6f8e9f0a8a
If we've got a full output buffer queue and cannot send
...
anything for two mintues (see ``set choked'' and ``show
bundle''), nuke the ip, mp and link level buffer queues.
This should fix problems where ``ppp -auto'' seems to stop
responding after failing to connect to the peer a few times.
1998-08-25 17:48:43 +00:00
9773f8c0c8
Consolidate the two malloc()s that are done when allocating
...
an mbuf.
1998-08-21 18:10:15 +00:00
3f37462e61
Make ``show mem'' display the number of packets allocated as well as the
...
number of octets.
1998-08-21 18:09:57 +00:00
b6f5f44231
Destroy any existing chat timeouts in datalink_ComeDown()
...
If we're told to close/down while in DIAL or LOGIN state,
we don't want to keep our timeout running :-/
1998-08-18 00:53:48 +00:00
fc254be9bd
Don't lose an allocated pointer if realloc() fails.
...
Free it instead.
Pointed out by: Theo de Raadt
1998-08-17 06:42:40 +00:00
f841c4e56e
Be careful about using ``.Bd -literal'' as groff sometimes keeps
...
the `-literal' after the closing .Ed.
Where this happens, use ``.Bd -unfilled'' with ``.It Li'' to dodge
the problem - it looks better too.
Problem reported by: Dom Mitchell <dom@phmit.demon.co.uk>
1998-08-11 18:59:36 +00:00
7955cdca14
`dns' option defaults to disabled, not enabled.
1998-08-09 23:40:31 +00:00
0f5ecc8b46
Add missing .El
1998-08-09 17:17:23 +00:00
74e4a8dab7
/var/run/tunX.pid is created regardless of ppps mode.
...
Spotted by: Alex <garbanzo@hooked.net>
1998-08-09 17:17:10 +00:00
44cae95d95
Use IFT_PPP from net/if_types.h rather than hard-coding it.
1998-08-09 16:41:01 +00:00
bf1d3ff614
When entering ``term'' mode, don't output any messages until
...
the device is successfully opened. If we fail to open it,
mention the fact.
Also go back into command mode as soon as the device is closed
rather than waiting for the user to type something before noticing.
1998-08-09 15:34:11 +00:00
2a63083586
Don't forget to call PacketAliasInit().
...
PR: 7515
1998-08-09 09:13:54 +00:00
0581dfeff0
Missed these...
1998-08-07 18:44:16 +00:00
92b0955883
o Support callback types NONE, E.164, AUTH and CBCP.
...
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set login'' or
``set hangup''.
o Allow ``*'' and blanks as placeholders in ppp.secret and
allow a fifth field for specifying auth/cbcp dialback
parameters.
o Remove a few extraneous #includes
o Define the default number of REQs (restart counter) in defs.h
rather than hardcoding ``5'' all over the place.
o Fix a few man page inconsistencies.
1998-08-07 18:42:51 +00:00
0bdcbcbe9b
PR: 7469
...
Be careful that the current or next prompt in the list
that we're iterating through doesn't get changed by
descriptor_Read().
1998-08-02 13:01:16 +00:00
94245ac66c
On receipt of a sig 15, do a full bundle_Close() even if
...
our current phase is PHASE_DEAD as it's possible that there
are links stuck in OPENING waiting for a redial timer.
1998-08-02 06:56:40 +00:00
68a0e17122
When we receive an LCP config REQ in Opened state,
...
do TLD *before* processing the config request as
TLD initialises the peers LCP values.
It's strange that an IRC isn't required here - but
I'll bow to the wisdom of the rfc.
1998-08-01 01:02:41 +00:00
cff2b1c9b4
Cosmetic: Diagnostic wording (Unknown -> Unexpected)
1998-08-01 01:02:12 +00:00
c31ac0b396
Always dial immediately on ``open'', ``dial'' and ``call''.
...
We don't need a ``!''.
1998-07-31 19:50:24 +00:00
ba23f3976a
Allow an optional ``!'' in the open, dial & call commands.
...
When used, the redial timer is ignored and the modem is
opened immediately.
1998-07-29 18:21:17 +00:00
50fa554e42
Use tcsetattr TCSANOW instead of TCSADRAIN so that dedicated mode doesn't
...
end up blocking indefinitely when there's no carrier.
1998-07-29 18:20:53 +00:00
2062443fd7
Silence ``Network unreachable'' warnings when using
...
``add .... HISADDR''. The network will never be
reachable at this point unless we're in -auto or reading
the command from ppp.linkup.
We can now run the following lines and get the expected
results:
set ifaddr 1.2.3.4/0 5.6.7.8/0
add default HISADDR
where a route is added immediately in auto mode and the
whole thing is delayed 'till the IP numbers have been
agreed in other modes.
Essentially, ppp.linkup is no longer required.
1998-07-28 21:54:54 +00:00
93280d730e
o Tidy up PAP and CHAP diagnostics. They're now all logged as PHASE
...
diagnostics (which are on by default).
o Deal correctly with both sides wanting CHAP.
o Output a warning if we're using an empty ``authname''. This is
*not* what we want to do.
1998-07-28 21:54:30 +00:00
501f548011
Add missing braces - without them, the IP & label were mis-selected
...
from ppp.secret.
Problem reported by: Dom Mitchell <dom@phmit.demon.co.uk>
1998-07-19 21:07:24 +00:00
3b09372a14
Correct enable/disable handling (broken when ironing out
...
32/64 bit issues recently).
1998-07-12 00:30:18 +00:00
7d797fa780
Check the ``alive'' filter for a packet *before* the
...
mbuf is deallocated by vj_SendFrame().
1998-07-11 19:05:24 +00:00
14593dfd98
Change MIN_LQRPERIOD from 5 to 2.
1998-07-11 02:48:36 +00:00
9dae3e8d4b
Don't disable ^D in interactive mode.
...
Wished for by: pkh
1998-07-04 22:04:12 +00:00
0dcb215a89
Don't require context when there's only one link
...
for ``open lcp''
1998-07-04 22:03:56 +00:00
David E. O'Brien
Brian Somers
Wolfram Schneider