Commit Graph

7 Commits

Author SHA1 Message Date
Kenneth D. Merry 50711c71c9 Add a facility in the CAM error handling code to retry selection timeouts.
If the client requests that the error recovery code retry a selection
timeout, it will be retried after half a second.  The delay is to give the
device time to recover.

For most of these drivers, I only added selection timeout retries where
they were also retrying unit attention type errors.  The sa(4) driver calls
saerror() in a number of places, but most of them don't request retrying
unit attentions.

Also, bump the default minimum CD changer timeout from 2 to 5 seconds and
the maximum timeout from 10 to 15 seconds.  Some Pioneer changers seem to
have trouble with the shorter timeout.

Reviewed by:	gibbs
1999-05-09 01:25:34 +00:00
Matt Jacob c7131a684c Add in named SID field revision names (including CCS).
Add in named defines for DEFAULT and NOCHANGE densities (for sequential
access devices).
1998-12-05 22:10:14 +00:00
Kenneth D. Merry 50642f180c Fix several potential buffer overrun conditions. These changes have been
tested both in the kernel and in userland.  Also, fix a couple of printf
warnings that show up when CAMDEBUG is defined.

Reviewed by:		imp
Partially submitted by:	imp
1998-10-15 19:08:58 +00:00
Kenneth D. Merry 696db22238 Modify the changer driver so it can handle (hopefully!) changers that need
block descriptors enabled on mode sense commands.

Basically, we try sending a mode sense with block descriptors disabled (the
previous default), and if it fails, we try sending the mode sense with
block descriptors enabled.  If that works, we note that in a runtime quirk
entry, so we don't bother disabling block descriptors again for the device.

This problem was first reported by Chris Jones <cjones@honors.montana.edu>
on one of the NetBSD lists, but I'd imagine that some FreeBSD users would
have run into it eventually as well, since our changer driver is derived
form the NetBSD changer driver.

Also, change some of the probe logic so that we do the right thing in the
case of a failure to attach.

Fix a memory leak in chgetparams().

Add a couple of inline helper functions to scsi_all.h to correctly return
the start of a mode page.

NetBSD PR:	kern/6214
Reviewed by:	gibbs
1998-10-02 05:25:49 +00:00
Kenneth D. Merry e5b118dd3d In the bootverbose case, print out error messages for all errors that will
not be retried again, even if the SF_NO_PRINT flag is set.

Reviewed by:	gibbs
1998-09-29 22:11:30 +00:00
Kenneth D. Merry 37b9efd37b Fix the CAM code so that people can compile kernels with the CD driver but
without the DA driver.

The problem was that the CD driver depended on scsi_read_write() and
scsi_start_stop(), which were defined in scsi_da.c.

I moved both functions, and their associated data structures and defines
from scsi_da.* to scsi_all.*.  This is technically the "wrong" thing to do
since those commands are really only for direct-access type devices, not
for all SCSI devices.  I think, though, that the advantage (allowing people
to compile kernels without the disk driver) outweighs any architectural
purity arguments.

PR:		kern/7969
Reviewed by:	gibbs
1998-09-18 22:33:59 +00:00
Justin T. Gibbs 76babe507b SCSI Peripheral drivers for CAM:
da	- Direct Access Devices (disks, optical devices, SS disks)
	cd	- CDROM (or devices that can act like them, WORM, CD-RW, etc)
	ch	- Medium Changer devices.
	sa	- Sequential Access Devices (tape drives)
	pass	- Application pass-thru driver
	targ	- Target Mode "Processor Target" Emulator
	pt	- Processor Target Devices (scanners, cpus, etc.)

Submitted by:	The CAM Team
1998-09-15 06:36:34 +00:00