just to ensure 32-bit variables. Doing so broke and/or pessimized
i386's with 64-bit longs (unnecessary use of 64-bit variables
caused remarkably few problems in C code, but the inline asm here
tended to fail because there are no 64-bit registers). Since the
interfaces here are very machine-dependent and shouldn't be used
outside of the kernel, use a standard types of "known" width instead
of fixed-width types.
Changed all quad_t's to u_int64_t's. quad_t isn't standard, and
using signed types for 64-bit registers was bogus (but made no
difference).
to ensure 32-bit variables. Doing so broke i386's with 64-bit
longs. Use fixed-size integral types instead of plain ints, shorts,
chars and pointers since the bootinfo struct layout is a binary
interface. The boot blocks could reasonably be implemented using
16-bit code.
least unsuitable for holding an object pointer. This should have been
used to fix warnings about casts between pointers and ints on alphas.
Moved corresponding existing general typedef (fptrint_t) for function
pointers from the i386 <machine/profile.h> to a kernel-only typedef
in <machine/types.h>. Kludged libc/gmon/mcount.c so that it can
still see this typedef.
is the kernel part of my commits, the userlevel stuff will be done in
a separate commit. Add the ability to suspend as well as hibernate to
syscons. Create a new virtual key like hibernate for suspend. Update
apm_bios.h to define more apm bios goodies.
There is only cdevsw (which should be renamed in a later edit to deventry
or something). cdevsw contains the union of what were in both bdevsw an
cdevsw entries. The bdevsw[] table stiff exists and is a second pointer
to the cdevsw entry of the device. it's major is in d_bmaj rather than
d_maj. some cleanup still to happen (e.g. dsopen now gets two pointers
to the same cdevsw struct instead of one to a bdevsw and one to a cdevsw).
rawread()/rawwrite() went away as part of this though it's not strictly
the same patch, just that it involves all the same lines in the drivers.
cdroms no longer have write() entries (they did have rawwrite (?)).
tapes no longer have support for bdev operations.
Reviewed by: Eivind Eklund and Mike Smith
Changes suggested by eivind.
Kapok Computer Co. notebook with AMI 'WinBIOS' which seems to insist
on having a short jump and nop as the first instructions in the
boot sector code. The prevailing theory is that the BIOS is doing
some sort of boot sector virus detection and refusing to run any
boot block that doesn't start with the same instruction sequence as
MS-DOG boot sector code. If this is the case, it would be nice if it
actually printed an error message to this effect instead of just
saying 'FAILED.'
This workaround has no effect on the boot sector code other than to
increase its size by three bytes.
code. Apart from the first one, none really affect typical configurations
but are nevertheless unnecessary limitations. We use netbooted PCs as
student X-terminals and all of the below fixes have been useful. Apologies
for including them all in one PR, but some are just too silly or trivial
to send on their own!
a) Newer SMC cards have hardware addresses starting with 00:E0.
Netboot compares the MAC address with 00:00:C0 to determine
if it is a WD/SMC card, so it fails to detect these.
b) Netboot is unable to boot kzipped kernels, as it assumes that
the kernel load address is 0x100000.
c) Users can abort the booting process and enter arbitrary network
addresses, or boot from a floppy disk. This can be a problem when
netbooted machines are used in a student environment.
d) It is not possible to set all options via bootp. For example there
is no way to remotely force a client to boot from disk. With both
SECURE_BOOT(patch below) and NO_TFTP defined, short of unplugging
the eprom there is no way at all to get the client to boot locally.
A generic solution is to allow complete netboot commands to be sent
using bootp lines such as:
:T132="diskboot":
e) The last character of netboot command names is not checked. You
can type 'iz 10.0.0.1' and it will be interpreted as 'ip'. This
is only important if you try to add a new command which is the
same as an existing one except for the last character.
f) We have a configuration where multiple servers are willing to serve
a diskless client. The tftp config file, or the bootptab entry on
each server must specify the root and swap filesystems as 'ip:/fs'
even though 'ip' will usually be the responding server's IP address.
It would be nice if netboot could automatically prepend the server's
IP address to an entry specified as just '/fs', so that multiple
servers can use the same tftp or bootp configuration files. Admittedly
this is hardly a major problem!
PR: 7098
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
NFS_MINATTRTIMO VREG attrib cache timeout in sec
NFS_MAXATTRTIMO
NFS_MINDIRATTRTIMO VDIR attrib cache timeout in sec
NFS_MAXDIRATTRTIMO
NFS_GATHERDELAY Default write gather delay (msec)
NFS_UIDHASHSIZ Tune the size of nfssvc_sock with this
NFS_WDELAYHASHSIZ and with this
NFS_MUIDHASHSIZ Tune the size of nfsmount with this
NFS_NOSERVER (already documented in LINT)
NFS_DEBUG turn on NFS debugging
also, because NFS_ROOT is used by very different files, it has been
renamed to opt_nfsroot.h instead of the old opt_nfs.h....
end of the main options section.
Turned on documented option OVERRIDE_TUNER. LINT is primarily
for turning on options, not for documenting them.
Don't list IPFILTER twice (once as broken).
mmioctl() to fix hundreds of style bugs and a few error handling bugs
(don't check for superuser privilege for inappropriate ioctls, don't
check the input arg for the output-only MEM_RETURNIRQ ioctl, and don't
return EPERM for null changes).
`void *' arg. Fixed or hid most of the resulting type mismatches.
Handlers can now be updated locally (except for reworking their
global declarations in isa_device.h).
Don't generate declarations for isa interrupt handlers at all.
Isa interrupt handlers are now declared in <i386/isa/isa_device.h>
but should be converted take a `void *' arg and staticized as
soon as possible.
Updated CONFIGVERS. New configs are very incompatible with
previous versions.
and don't depend on them being declared there. This will cause lots of
warnings for a few minutes until config is updated. Interrupt handlers
should never have been configured by config, and the machine generated
declarations get in the way of changing the arg type from int to void *.
over from the probe are now expected for incompatible UARTs that
deliver IRQs as a strobe (low) instead of a level (high).
Discard events on going-away devices too. Endless loops may have
been possible when an active pccard was removed.
Submitted by: Randall Hopper <rhh@ct.picker.com>
The patch supports using the X10 Mouse Remote in both stand-alone and
pass-through configurations, so you can plug your mouse and remote into the
same serial port, use the mouse for X, and use the remote for other apps
like Fxtv. For instance, we can now control fxtv via the remote control
just like a TV : change channels, mute, increase volume, zoom video,
freeze frame 8)
The mouse events are channeled through the syscons/sysmouse I/F like
normal, and the remote buttons are "syphoned off" to a UNIX-domain stream
socket (defined as _PATH_MOUSEREMOTE in <machine/mouse.h>) for a
remote-aware app to grab and use.
For further info on the X10 Mouse Remote see:
http://www.x10.com/products/x10_mk19a.htm
Define an unsigned version of off_t (uoff_t) if KERNEL is defined.
This is useful for micro-optimizing expressions involving off_t's
where you know that the values are non-negative but the compiler
doesn't know it.
Fixed a gratuitous ANSIism.
explicit use of `[unsigned] long long' and `[u]quad_t'.
Fixed disorder of and lack of comments for the types added in the previous
two commits. Improved some comments. The comments should be elswhere
(not duplicated in every MD file).
machine-independent code and try mounting the devices in the
lists instead of guessing alternative root devices in a machine-
dependent way.
autoconf.c:
Reject preposterous slice numbers instead of silently converting
them to COMPATIBILITY_SLICE.
Don't forget to force slice = COMPATIBILITY_SLICE in the floppy
device name.
Eliminated most magic numbers and magic device names in setroot().
Fixed dozens of style bugs.
vfs_conf.c:
Put the actual root device name instead of "root_device" in the
mount struct if the actual name is available. This is useful after
booting with -s. If it were set in all cases then it could be used
to do mount(8)'s ROOTSLICE_HUNT and fsck(8)'s hotroot guess better.
or unsigned int (this doesn't change the struct layout, size or
alignment in any of the files changed in this commit, at least for
gcc on i386's. Using bitfields of type u_char may affect size and
alignment but not packing)).
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
so that the new behaviour is now default.
Solves the "infinite loop in diversion" problem when more than one diversion
is active.
Man page changes follow.
The new code is in -stable as the NON default option.
miscconfigured case) if the port is the console. This fixes several
bugs:
- if all sioprobe()s failed, then the console driver followed null
pointers in cdevsw[].
- if the sioprobe() for the console failed but another sioprobe()
succeeded, then init hung early when the console couldn't be
opened.
- it was silly for the console to not be there after printing boot
messages on it.
Bugs introduced by this are hopefully no worse than old ones caused
by forcing the success of the `cn' level probe.
Only complain about an irq mismatch in the probe if the configured
irq doesn't become active, and then print the bitmap of irqs that
became active (including clock irqs) instead of just the first
(not including clock irqs).
Bugs reported by: msmith
probe and intialisation. This will ultimately remove the grubby (but
functional) hack that copies a real-mode function into low memory
early in locore.s.
layer does not like the null shmid_ds buffer pointer. The emulation layer
returned an error without ever calling FreeBSD's shmctl, so the segments
were not being deleted when the reference count went to zero."
Submitted by: Kevin Street <street@iname.com>
a test of the irq number, and made failure of this test non-fatal.
Removed related unused complications for the APIC_IO case. Removed the
no-test3 flag.
Deverbosified the failure messages for the other tests. Removed the
per-port verbose flag - just use the general verbose flag.
Clean up (or if antipodic: down) some of the msgbuf stuff.
Use an inline function rather than a macro for timecounter delta.
Maintain process "on-cpu" time as 64 bits of microseconds to avoid
needless second rollover overhead.
Avoid calling microuptime the second time in mi_switch() if we do
not pass through _idle in cpu_switch()
This should reduce our context-switch overhead a bit, in particular
on pre-P5 and SMP systems.
WARNING: Programs which muck about with struct proc in userland
will have to be fixed.
Reviewed, but found imperfect by: bde
Bruce Evans
Julian Elischer
Jordan K. Hubbard
Eivind Eklund
Warner Losh
Bill Paul
Poul-Henning Kamp
John-Mark Gurney
Mike Smith
Kazutaka YOKOTA
Stephen McKay
KATO Takenori
Amancio Hasty
Justin T. Gibbs
Steve Price
David Greenman
Doug Rabson
Søren Schmidt
John Dyson
Joseph Koshy