machdep.c:
Changed printf's a little and call vfs_unmountall() if the sync was
successful.
cd9660_vfsops.c, ffs_vfsops.c, nfs_vfsops.c, lfs_vfsops.c:
Allow dismount of root FS. It is now disallowed at a higher level.
vfs_conf.c:
Removed unused rootfs global.
vfs_subr.c:
Added new routines vfs_unmountall and vfs_unmountroot. Filesystems
are now dismounted if the machine is properly rebooted.
ffs_vfsops.c:
Toggle clean bit at the appropriate places. Print warning if an
unclean FS is mounted.
ffs_vfsops.c, lfs_vfsops.c:
Fix bug in selecting proper flags for VOP_CLOSE().
vfs_syscalls.c:
Disallow dismounting root FS via umount syscall.
use of timeout_t -> timeout_func_t in aha1542 and aha1742 drivers.
2) fix a bug in the portalfs that was uncovered by better prototyping -
specifically, the time must be converted from timeval to timespec
before storing in va_atime.
3) fixed/added some miscellaneous prototypes
2. Hack.
Hack is to define RCSID() to null macro so that new msun stuff
will compile. This does NOT belong here, and I DON'T want it to
stay, I just need to put this here for now to enable msun and we need
to talk about what our RCSID story is supposed to be. We talked about
supporting RCSID() one day, and everyone seemed to like the idea
reasonably well of making it a macro you could just no-op this way,
but we never did anything. Now I see that JTCs code has it and I'm
loath to remove it or do anything until we've discussed it some more.
Well, so how about it? What's our story vis-a-vis RCSID() going to
be?
Submitted by: jkh
into one, hopefully functioning, Ultrastore driver. Any Ultrastore owners
out there - please speak up! We need to test this puppy.
Reviewed by:
Submitted by:
This is the slowest and most stupid of our SCSI-drivers, but it is there
and it works. It has been tested with CD-ROM and disk.
It uses no interrupts, no DMA, just polled I/0.
Transfer-rate is <= 100Kbyte/sec.
If you set the jumpers on the board, you can change the unit-number and
you will be able to have four of these co-exist in one computer, why one
would do that is somewhat unclear though.
If I ever get my hand on the docs for this, I will improve it of course,
but for now we can install and access those CD-ROMs.
- Delete redundant declarations.
- Add -Wredundant-declarations to Makefile.i386 so they don't come back.
- Delete sloppy COMMON-style declarations of uninitialized data in
header files.
- Add a few prototypes.
- Clean up warnings resulting from the above.
NB: ioconf.c will still generate a redundant-declaration warning, which
is unavoidable unless somebody volunteers to make `config' smarter.
/usr/src/sys/i386/isa/clock.c:
o Garrett's statclock changes.
o Wire xxxintr, not Vclk.
o Wire using register_intr(), not setidt().
/usr/src/sys/i386/isa/icu.s:
o Garrett's statclock changes.
o Removed unused variable high_imask.
o Fake int 8 for rtc as well as int 0 for clk. Required for kernel
profiling with statclock, harmless otherwise.
/usr/src/sys/i386/isa/isa.c:
o Allow isdp->id_irq and other things in *isdp to be changed by
probes. Changing interrupts later requires direct calls to
register_intr() and unregister_intr() and more care.
ALLOW_CONFLICT_* is brought over from 1.1.5, except
ALLOW_CONFLICT_IRQ is not supported. IRQ conflict checking is
delayed until after probing so that drivers can change the IRQ
to a free one; real conflicts require more cooperation between
drivers to handle.
o Too many details to list.
o This file requires splitting and a lot more work.
/usr/src/sys/i386/isa/isa_device.h:
o Declare more things more completely.
/usr/src/sys/i386/isa/sio.c:
o Prepare to register interrupt handlers as fast.
/usr/src/sys/i386/isa/vector.s:
o Generate entry code for 16 fast interrupt handlers and 16 normal
interrupt handlers. Changed some constants to variables:
# $unit is now intr_unit[intr]. Type is int. Someday it should
be a cookie suitable for the handler (e.g., a struct com_s for
sio).
# $handler is now intr_handler[intr].
# intrcnt_actv[id_num] is now *intr_countp[intr]. The indirection
is required to get a contiguous range of counters for vmstat
and so that the drivers depend more in the driver than on the
interrupt number (drivers could take turns using an interrupt
and the counts would remain correct). There is a separate
counter for each device and for each stray interrupt. In
1.1.5, stray interrupt 7 clobbers the count for device 7 or
something worse if there is no device 7 :-(.
# mask is now intr_mask[intr] (was already indirect).
o Entry points are now _XintrI and _XfastintrI (I = intr = 0-15),
not _VdevU (U = unit).
o Removed BUILD_VECTORS stuff. There's a trace of it left for
the string table for vmstat but config now generates the
string in one piece because nothing more is required.
o Removed old handling of stray interrupts and older comments
about it.
Submitted by: Bruce Evans
done. This patch was extended to also include a suggested change by
Kirk McKusick which allows the control tty to be reasigned to a different
tty without losing a vnode.
not provide the full accuracy of a randomized statistical clock, it does
provide greater accuracy than the previous method, while not significantly
increasing overhead. It also provides profiling support at 1024 Hz.
You must re-compile config before making a new kernel, or you will end
up with unresolved symbols.
Reviewed uy: Bruce evans said it worked for him.
Delete the ifdef GPL_EMULATE case here and made the padding work for
both types of emulators so that there is no longer a need to compile
ps and friends new if you are using the GPL math emulator instead the
normal one.
Added code to check for an adaptec 1542B Version 3.20 Board. This was the
first board that supports >1Gb drives and has the extended bios. So we
need also to disable the exbios like it is done for the 1542C/CF boards.
``changes'' are actually not changes at all, but CVS sometimes has trouble
telling the difference.
This also includes support for second-directory compiles. This is not
quite complete yet, as `config' doesn't yet do the right thing. You can
still make it work trivially, however, by doing the following:
rm /sys/compile
mkdir /usr/obj/sys/compile
ln -s M-. /sys/compile
cd /sys/i386/conf
config MYKERNEL
cd ../../compile/MYKERNEL
ln -s /sys @
rm machine
ln -s @/i386/include machine
make depend
make
Added my if_lp TCP/IP driver to lpt.c.
I have (surprise) not been able to test it on a 2.0 machine yet. Connect the
machines with a parallel "lap-link" cable, and get rates from 35 kbyte/sec
up to 75 kbyte/sec. (when ftp'ing foo: dev/zero -> bar:/dev/null).
The same lpt.c file should compile under 1.1.5.1 without problems.
I think we should promote this feature when we dump 2.0 on the expectant
public, because it provides a cheap and efficient way to move data to and
from notebooks &c. It is not a replacement for ethernet, but a cheap
substitute sometimes.
This driver supports all the DEC EtherWORKS III NICs (DE203, DE204,
and DE205) and the later DEC EtherWORKS II NICs (DE200, DE201, DE202,
DE422). DEPCA-style boards prior to the DE200 have not been tested
and may not work.
Submitted by: Matt Thomas (thomas@lkg.dec.com)
are running under. Here's how to bootstrap (order is important):
1) Re-compile gcc (just the driver is all you need).
2) Re-compile libc.
3) Re-compile your kernel. Reboot.
4) cd /usr/src/include; make install
You can now detect the compilation environment with the following code:
#if !defined(__FreeBSD__)
#define __FreeBSD_version 199401
#elif __FreeBSD__ == 1
#define __FreeBSD_version 199405
#else
#include <osreldate.h>
#endif
You can determine the run-time environment by calling the new C library
function getosreldate(), or by examining the MIB variable kern.osreldate.
For the time being, the release date is defined as 199409, which we have
already established as our target.
use it in NFS. This is required both for diskless support and for POSIX
compliance. Note: the support in NFS is only for the local node.
Submitted by: based on work originally done by Yuval Yurom
Paul Richards
David Greenman
Andreas Schulz
Jordan K. Hubbard
Poul-Henning Kamp
Garrett Wollman
Søren Schmidt