74d7962900
Oops. Fix up the checksum routine - my last commit broke it slightly.
1995-01-22 20:40:48 +00:00
3ece328451
Put brackets around EXTRACT_CMD, can be several commands here
1995-01-17 23:55:53 +00:00
2db2081438
Correct a small problem in that when there isn't a checksum for that
...
particular file, but there is a files/md5, it reports that it failed
the checksum
1995-01-16 23:33:08 +00:00
41c4bc57c7
Use absolute path for install passed to configure
...
to disallow prepending ../ in second level Makefiles
1995-01-12 02:29:42 +00:00
fb097df2ce
Typo!
1995-01-11 08:53:28 +00:00
1deaf2e347
Add missing ! in front of pipeline for extract commands---otherwise
...
it would exit on *successful* extraction.
1995-01-11 08:50:48 +00:00
8b9d60735d
Catch case where extraction fails. Thanks!
1995-01-10 12:23:44 +00:00
10d65ca957
Move pre-extract target inside COOKIE
...
Add checksum check for extract, if checksum file present
1995-01-06 22:14:12 +00:00
d5ca901589
Sort out dependencies. Now they look like:
...
patch: extract
configure: depends patch
build: configure
install: build
Does this look ok?
1995-01-05 08:15:53 +00:00
edf9e79525
Typo fix from Ollivier Robert.
...
Submitted by: ollivier
1995-01-05 02:15:05 +00:00
e5d85be85c
Gary Palmer's patches for checksumming and description.
...
Submitted by: gpalmer
1995-01-04 23:06:38 +00:00
2511bc4a15
Put depends before configure. No reason that I can see for putting it after,
...
and it breaks mule the way it is now.
1995-01-04 09:58:39 +00:00
bb3c97bf74
Some of the doc here was less than adequately fleshed-out. Make some
...
feeble attempt to do so.
1995-01-04 08:30:33 +00:00
ad2a7583d6
Document describe target.
1995-01-04 07:35:46 +00:00
c723fc3fc8
Add describe target support.
1995-01-03 11:52:01 +00:00
c9c9b4072b
Preset ac_cv_path_CC="${CC}" before running ./configure,
...
needed for Autoconf 2
1995-01-01 20:06:20 +00:00
1974136822
Oops, forget "" for ${CC} and ${CFLAGS}...
1994-12-28 04:17:54 +00:00
95f1b49e83
Set proper INSTALL* variables before running ./configure
1994-12-28 04:14:19 +00:00
af87f3630b
Use CFLAGS=${CFLAGS} ./configure to avoid picking dumb GNU -g default
1994-12-28 03:30:21 +00:00
e887886391
Use "CC=${CC} ./configure" to avoid usage of debugging 'gcc'
1994-12-28 03:21:16 +00:00
6d97ec5daa
Put dummy targets for make-md5 & check-md5 inside a
...
NO_EXTRACT ifdef so that tcpblast doesn't muck
things up
1994-12-17 21:29:38 +00:00
cf6be75886
bsd.port.mk: missing semicolon added
...
bsd.port.subdir.mk: added check-md5 as target
1994-12-17 20:50:44 +00:00
50da78da7c
Automatically add gmake to DEPENDS, if USE_GMAKE
1994-12-17 02:37:26 +00:00
a7e957efb2
Don't use build: ... pre-build, move pre-build inside
...
BUILD_COOKIE instead
1994-12-17 01:58:11 +00:00
f9ff1b665d
patch: pre-patch ... is wrong, move pre-patch
...
inside PATCH_COOKIE
1994-12-14 05:53:09 +00:00
e40adb1bbd
Added '${GMAKE} install.man' when installing with Imake and gmake
1994-12-12 22:32:30 +00:00
ad19367c21
Early md5-checksumming code. This seems to work fine on my machine
...
but needs more testing on more ports than I have on my box.
1994-12-11 20:36:12 +00:00
b3ac125106
Last gremlin-killer of the day. Typo fixed and missing .endif replaced.
1994-12-11 15:31:22 +00:00
d628b1f606
<Sigh> Got the placing of a .if wrong. Fix it.
1994-12-11 14:50:40 +00:00
8a7c3fffc6
Erk. Damn. A hash perfixing a comment was lost somewhere.
...
Fixed.
1994-12-11 14:12:30 +00:00
e0e109abe7
1) Small tidyup
...
2) Change INSTALL_MANPAGES to NO_INSTALL_MANPAGES and document it
3) Add a PKGNAME variable to allow the package name
not to be dictated by stupid DISTNAMEs
4) Add a PATCH_DEBUG option and a slight change to the default
patch system - add --forward to help ensure correct patching
1994-12-10 18:07:38 +00:00
5ddddc4827
Change wrong comment: NCFTP_ARGS --> NCFTPFLAGS
1994-11-25 17:04:02 +00:00
0512285fe2
Don't use a rm -rf WORKDIR if NO_WRKDIR is defined. You have a good chance
...
to blow away your current dir, because WRKDIR == CURDIR. This should
help tcpblast to not blow away itself in the clean target :-).
1994-11-21 10:30:37 +00:00
4b75ea3568
There seems to be some trouble with install.man working right everywhere.
...
Conditionalize it off of INSTALL_MANPAGES until I can figure out just
why some X ports seem to like it and others not.
1994-11-17 15:46:27 +00:00
ee5b1a1e22
Whoops! Typo. Correct.
1994-11-17 10:07:45 +00:00
07f6028ea8
I found today that making packages for X11 ports wasn't working.
...
Further investigation showed that prefix was erroneously set to /usr/local
for X11 based ports as well, when the assumption was that they'd really go
into ${X11BASE} (an /etc/make.conf variable that the user's free to set).
Set X11BASE to /usr/X11R6 if the user hasn't already, and assume that
the user really wants prefix to point there when the port is XMKMF based.
1994-11-17 10:06:03 +00:00
fcd2dde4e0
Add support for NO_WRKDIR.
1994-11-17 00:25:16 +00:00
f877e878c9
2 new concepts that just occurred to me:
...
MASTER_SITE_OVERRIDE - If set in the environment, will override everyone's
MASTER_SITES settings. Useful if you'd prefer to point to a
distfiles repository somewhere closer.
MASTER_SITE_FREEBSD - Sets OVERRIDE to be FreeBSD's own master repository.
1994-11-17 00:18:28 +00:00
1876ac94a7
If USE_GMAKE is defined, use ${GMAKE} in ${XMKMF} && ${MAKE} Makefiles
1994-11-16 23:14:22 +00:00
041c2641f1
Make depends a separate target. Now you can select when the dependency
...
list is traversed.
1994-11-15 10:16:56 +00:00
ff47faa890
Add patch cookies. This should prevent gratuitous patch re-application
...
attempts.
1994-11-11 09:45:33 +00:00
9e320feef3
For submakes, don't do a `${MAKE} ${MAKEFILE} all' or
...
`${MAKE} ${MAKEFILE} install', indirect the target through ALL_TARGET and
INSTALL_TARGET now, so they can be easily overridden.
1994-11-03 19:53:46 +00:00
68feb5ef8a
Add reinstall target for Poul-H. This lets you install again from
...
the same build, ignoring the INSTALL_COOKIE.
1994-11-03 19:14:08 +00:00
2e7c3b0abb
This is what I get for implementing suggestions without really thinking
...
about them.. :-) The patches/* won't work, it needs to be patches/patch-*
to avoid catching things like CVS files when working with a checked-out
copy of ports! Whoops!
1994-11-01 21:04:27 +00:00
c8b2f1c02f
2 changes:
...
1. Make build rely on a BUILD_COOKIE now. I'm tired of builds
being redone gratuitously while I'm trying to debug a tree build
problem.
2. Remove all the literal `touch -f' commands and indirect them through
variables. This lets you "leave tracks" in different ways, depending
on the medium. Just part 1 of my planned changes to make builds
directly off the CD work.
1994-11-01 18:09:22 +00:00
9c4fb858bb
Make patch rule pick up everything in patchdir alphabetically.
...
No need to call it `patch-aa' if you can simply call it `aa', etc.
1994-10-31 22:51:09 +00:00
4335d91992
1. PREFIX has nothing to do with DESTDIR. Remove it finally.
...
2. Make sure to pass PREFIX to sub-makes when installing. This allows you to
install to places like ${PREFIX}/bin in your own install rule.
1994-10-22 23:02:39 +00:00
cd08c443af
Invoke install.man if USE_IMAKE is set.
1994-10-22 09:21:35 +00:00
2ecb809ab3
Add ${.MAKEFLAGS} to sub-makes, pointed by Rod
1994-10-14 21:58:09 +00:00
cc33ccc9bc
Add new IS_INTERACTIVE flag. This lets you specify that the port
...
is an interactive port, and requires user input somewhere along
the way (either fetching, configuring, building or installing).
If the user then sets BATCH in their environment, this port will be
skipped. If the user sets INTERACTIVE, then ONLY those ports marked
interactive are run (allowing one to do all ports in two passes).
If the user sets both BATCH and INTERACTIVE, then a metal claw extends
from the CRT and brutally yanks their nose off.
1994-10-14 07:56:46 +00:00
Gary Palmer
Andrey A. Chernov
Satoshi Asami
Jordan K. Hubbard
Jean-Marc Zucconi
Andreas Schulz