of the ..umm.. "wierd" way binutils lays out the file. The section
headers are nearly at the end of the file and this is a problem when
loading from a .gz file which can't seek backwards (or has a limited
reverse seek, ~2K from memory).
This is intended to be compatable with the ddb/db_elf.c code and the
alpha/libalpha/elf_freebsd.c layout. I've studied these (which are NetBSD
derived) but did it a bit differently. Naturally the process is similar
since it's supposed to end up with the same result.
block descriptors enabled on mode sense commands.
Basically, we try sending a mode sense with block descriptors disabled (the
previous default), and if it fails, we try sending the mode sense with
block descriptors enabled. If that works, we note that in a runtime quirk
entry, so we don't bother disabling block descriptors again for the device.
This problem was first reported by Chris Jones <cjones@honors.montana.edu>
on one of the NetBSD lists, but I'd imagine that some FreeBSD users would
have run into it eventually as well, since our changer driver is derived
form the NetBSD changer driver.
Also, change some of the probe logic so that we do the right thing in the
case of a failure to attach.
Fix a memory leak in chgetparams().
Add a couple of inline helper functions to scsi_all.h to correctly return
the start of a mode page.
NetBSD PR: kern/6214
Reviewed by: gibbs
timeouts in the SA driver (timeouts for space, rewind and erase). Folks
can lengthen the timeouts if their hardware is especially slow, or shorten
them if they want to be notified of errors a little sooner.
Also, get rid of two OD driver options. The od driver has been made
obsolete by the da driver.
Reviewed by: ken, gibbs
Submitted by: Dag-Erling Coidan Smørgrav <des@FreeBSD.ORG>
expected. This bug caused builds of Modula-3 to fail in mysterious
ways on SMP kernels. More precisely, such builds failed on systems
with kern.fast_vfork equal to 0, the default and only supported
value for SMP kernels.
PR: kern/7468
Submitted by: tegge (Tor Egge)
SERVICE INTERNATIONAL DE LA ROTATION TERRESTRE
BUREAU CENTRAL DE L'IERS
OBSERVATOIRE DE PARIS
61, Av. de l'Observatoire 75014 PARIS (France)
Tel. : 33 (0) 1 40 51 22 26
FAX : 33 (0) 1 40 51 22 91
Internet : iers@obspm.fr
Paris, 17 July 1998
Bulletin C 16
To authorities responsible for
the measurement and distribution
of time
UTC TIME STEP
on the 1st of January 1999
A positive leap second will be introduced at the end of December 1998.
The sequence of dates of the UTC second markers will be:
1998 December 31, 23h 59m 59s
1998 December 31, 23h 59m 60s
1999 January 1, 0h 0m 0s
The difference between UTC and the International Atomic Time TAI is:
from 1997 July 1, 0h UTC, to 1999 January 1, 0h UTC : UTC-TAI = - 31s
from 1999 January 1, 0h UTC, until further notice : UTC-TAI = - 32s
Leap seconds can be introduced in UTC at the end of the months of
December or June, depending on the evolution of UT1-TAI. Bulletin C mailed
every six months, either to announce a time step in UTC, or to confirm that
there will be no time step at the next possible date.
Daniel GAMBIS
Director
Central Bureau of IERS
route. If your nameserver config is wrong, this will otherwise hang for
the default resolver timeout (75 seconds), leading people to think that
the system has hung.
- Express various sizes in bytes, rather than Kbytes, in the video
mode and adapter information structures.
- Fill 0 in the linear buffer size field if the linear frame buffer
is not available.
- Remove SW_VESA_USER ioctl. It is still experimetal and was not meant
to be released.
- Fix missing cast operator.
- Correctly handle pointers returned by the VESA BIOS. The pointers
may point to the area either in the BIOS ROM or in the buffer supplied
by the caller.
- Set the destructive cursor at the right moment.
o Use the board id command to find out what kind of board
we're talking to. If we're talking to a board that is has
an ID that is shared between boards supported by the aha
driver and the bt driver, then use the bt's geometry
register to weed out the bt cards. Otherwise assume that we
support this card.
o Remove bt esetup command sending to the card. It seems to
wedge too many cards.
o Revert to doing a soft reset after an invalid command. This
change didn't fix anything, so I'm backing it out. The
whole issue of card resetting needs to be revisisted at some
point so that we can do it properly on all hardware.
o GC unused stuff in some places.
Andrey A. Chernov
Jordan K. Hubbard
Peter Wemm
David E. O'Brien
Kenneth D. Merry
Mike Smith
Warner Losh
Kazutaka YOKOTA
Justin T. Gibbs
John Polstra
Jonathan Lemon
Poul-Henning Kamp
Dmitrij Tejblum
Mark Murray
Søren Schmidt