Commit Graph

240 Commits

Author SHA1 Message Date
Satoshi Asami 8e7c35dd1a A bunch of new targets in the package area. Relevent targets are:
package:           check installation, build package, create links,
                   touch cookie
repackage:         ditto but don't check cookie
package-noinstall: just build package from installed stuff, no cookies
                   involved at all
package-links      create the symbolic links only
delete-package:    delete package and symbolic links
delete-package-links: delete links only

These should make the management of the spaghetti of package links
a little friendlier. :)
1995-04-30 12:28:43 +00:00
Jordan K. Hubbard 6db578a60b Pass X11BASE to all sub-makes. I need it for a port, and I daresay that
there are a lot of hardwired "/usr/X11R6" paths out there that could stand
to use it as well.
1995-04-28 15:40:37 +00:00
Jordan K. Hubbard 6dbad786ae Add LIBFTP. 1995-04-26 14:34:19 +00:00
Satoshi Asami 570e661f02 (1) Add the chain of dependencies to the targets in the NO_* section
too (otherwise the chain won't work).
(2) If NO_WRKDIR is set, "make clean" removes "./.*_done" (assuming
    these are cookies...or should I list all the cookies?)
1995-04-24 10:41:51 +00:00
Satoshi Asami c046aaad20 Move call of fake-pkg from do-install to end of install. 1995-04-24 09:05:34 +00:00
Jordan K. Hubbard ffa6d17f61 Ok, this should get the last of the stragglers installed into a new fake-pkg. 1995-04-22 01:22:49 +00:00
Jordan K. Hubbard ca22b5aa87 Don't try to run the fake-pkg target if NO_PACKAGE is set. 1995-04-22 00:08:06 +00:00
Jordan K. Hubbard 405b7c80bd Typo: patch -> package 1995-04-22 00:05:46 +00:00
Jordan K. Hubbard b79219d31a Instead of copying PLIST over, run pkg_create in a special mode that dumps
the fully-formed PLIST to stdout and uses that.
1995-04-22 00:01:26 +00:00
Satoshi Asami 60ee8ee7cb Major overhaul. The major targets (fetch, extract, patch, configure,
build, install) are now all skeletons and do nothing but

(1) Call pre-* target (if exists)
(2) Call scripts/pre-* script (if exists)
(3) Call do-* target
(4) Call post-* target (if exists)
(5) Call scripts/post-* script (if exists)

The do-* targets do all the work.  The pre-* and post-* targets/scripts
don't exist by default.  The main targets check for the cookies too, so
porters shouldn't have to worry about them at all.

NOTE: THE MAIN TARGETS IN THE PORTS MAKEFILES SHOULD GO AWAY.  We need
to fix this before wcarchive comes back up.  Change the names to do-*,
rip out the cookies, rip out the calls to pre-* etc. and most of them
should work.

Also, reorganize the whole thing so that similar targets are together
and add more comments.  Surround section header with 64 #'s (C-u C-u
C-u # in emacs :).

Hopefully this will be the last major change to bsd.port.mk.  Now let
the Makefile-hacking begin.
1995-04-20 18:03:02 +00:00
Jordan K. Hubbard 0892118cdf 1. Add Satoshi's much-requested "fake pkg_add" option to the installation
rule.

2. Have all non-X11 prefix using packages include the BSD.local.dist mtree
   file for initialization of /usr/local.  I'm still not sure if this is
   A Good Thing(tm) but I'll see what the users say.  It's easily overridden.

3. Standardise on ${PKG_DBDIR} as pointer to /var/db/pkg or local preference.
1995-04-19 15:02:26 +00:00
Satoshi Asami f744a9768e Use PKGNAME in the "describe" target (used to generate INDEX) too.
Didn't make sense to have two ports with the same name.
1995-04-18 08:24:18 +00:00
Satoshi Asami 60f1eb26c1 Use PKGNAME instead of DISTNAME in messages. To avoid things like
"Building for WWW" (pops up in two different ports) "Installing for
web2c-6.1" (ditto), which aren even't reminiscent of the port's real
name.

Sorry jmz, please don't go fix the print Makefiles' own messages.
We are going to take them out after we do the great bsd.port.mk
update anyway.
1995-04-18 08:18:27 +00:00
Satoshi Asami 824cc0cc5d "package" now depends on "install", so we can do "make -k package" from
the top level and have the build-package sequence of each port work
together.

For the old behavior (i.e, just go ahead and blindly pack everything up,
regardless of the contents of work/), there is a new target "repackage".
1995-04-17 06:39:05 +00:00
Satoshi Asami 19eddad0a8 "all" now depends on "build", not "extract configure build".
Since "build" depends on "configure", which depends on "patch", etc.,
this shouldn't disrupt any Makefile that doesn't break the dependency
chain.

The old behavior was very annoying because when I did a "make -k",
it would still try to go configure and build even if the extraction
failed.
1995-04-17 06:28:15 +00:00
Satoshi Asami 825402c2ab Yikes...typo (.package/ should have been .packages/). 1995-04-15 23:56:29 +00:00
Jordan K. Hubbard 9e87dd6ab1 Don't pass duplicate pkgdeps to pkg_create 1995-04-10 08:09:21 +00:00
Jordan K. Hubbard a8f0877be0 Add new -P argument to pkg_create. 1995-04-09 15:00:56 +00:00
Jordan K. Hubbard 489c51e631 Add 2 new targets to facilitate some things I'm thinking about.
1.  package-name
	Simply echos the associated package name for a port (if any).
2.  package-depends
	Shows all package names on which this port depends.
1995-04-09 12:27:58 +00:00
Jordan K. Hubbard c4fb365962 1. Fix the first line (should be a proper comment - silly emacs).
2. KEYWORDS+= CATEGORIES
3. CATEGORIES+= all (always want to be in "all"!)
1995-04-09 10:24:09 +00:00
Satoshi Asami 3d0c66c99a Add support for categorized subdirectories for packages. By default,
all .tgz files go to /usr/ports/packages/.packages, and a relative
symlink is created for every item in CATEGORIES...i.e., if "CATEGORIES
= foo bar", then /usr/ports/packages/{foo,bar}/pkgname.tgz both point
to /usr/ports/packages/.packages/pkgname.tgz.

Suggested by:	jkh
1995-04-09 09:59:42 +00:00
Jordan K. Hubbard 30854325fe Add USE_X11 for ports which are X11 users but don't use IMAKE. 1995-04-04 05:57:19 +00:00
Gary Palmer 9a8496fd7b Remove a `.' from the end of the echo line
`>> Attempting to fetch from $${site}' as it is misleading
1995-04-04 04:23:37 +00:00
Jordan K. Hubbard a6ae8257a8 By default, KEYWORDS is a copy of CATEGORIES. 1995-04-01 10:01:49 +00:00
Jordan K. Hubbard c9cf4a47d8 Add default values and document them for CATEGORIES and KEYWORDS. 1995-04-01 09:35:29 +00:00
Jordan K. Hubbard 2cc9ea7aee Add support for new CATEGORIES and KEYWORDS fields. 1995-04-01 09:34:11 +00:00
Nate Williams a01bd386af Do what should have been done in v1.14
*Really* strip out unused local symbols from shared objects.

This was a typo on my part caused by an assumption that the profiled
libraries stripped symbols that same way as the non-profiled libraries.

Cut-n-Paste strikes again.

Obtained from: NetBSD
1995-03-28 17:54:11 +00:00
Satoshi Asami df32d0cc55 Add support for "distributed" patches and a little extra cleanup.
New variables:

PATCH_SITES:	patch equivalent of MASTER_SITES, overridable with
.		MASTER_SITE_OVERRIDE.
PATCHFILES:	Additional files to fetch and give to patch before
.		applying the ones in patches/patch-*.  If name ends
.		with ".gz" or ".Z", it will be piped through zcat first.

Plus PATCH_DIST_STRIP and PATCH_DIST_ARGS that serve the same functions
as PATCH_STRIP and PATCH_ARGS for patches in patches/patch-*.

In the documentation and echo messages, I used the term "distributed
patches" and "FreeBSD patches" to refer to ${PATCHFILES} and patches/patch-*.
If you can come up with better names, by all means go ahead and fix them.

"grep PATCH /usr/ports/*/*/Makefile" reveals seven ports (mule, jless,
jtcl, jtk, dgd, less, color_xterm, gee I wonder why I'm the one who
implemented this) that can benefit from this.  I'm now diving headlong
into /usr/ports to fix their Makefiles.
1995-03-28 01:14:29 +00:00
Satoshi Asami 32c4c80bff Added more standard package suport file names. INSTALL for the
installation script, DEINSTALL for the deinstallation script, and
REQ for the requirement script, will be added with appropriate
flags to PKG_ARGS if they exist under pkg/.
1995-03-27 13:11:18 +00:00
Gary Palmer c534dadbfe Add a misssing `@' from before echo -n "|${MAINTAINER}" 1995-03-23 20:42:42 +00:00
Jordan K. Hubbard 5abc844b74 Add maintainer to the index line. 1995-03-22 21:46:04 +00:00
Jordan K. Hubbard 2d333dc2dd Add new EXTRACT_BEFORE_FLAGS and EXTRACT_AFTER_FLAGS variables to make
complex extraction rules easier.
1995-03-22 21:28:31 +00:00
Jordan K. Hubbard 2efda52f23 Make the fetch message a little more interesting and informative. 1995-03-21 22:43:36 +00:00
Jordan K. Hubbard 3dd8895eb8 Add fetch-list command for Rod
Use ECHO_MSG macro for printing "===>" line things so that I can now turn
those OFF when I don't want them.
1995-03-21 03:59:13 +00:00
Jordan K. Hubbard bc202f1b6e Make the describe rule generate more thorough information that's actually
of use to a front-end program.  Back out my bogus description of the `index'
target! :-)
1995-03-21 01:51:12 +00:00
Jordan K. Hubbard 9608972d54 Document the index target. 1995-03-21 01:31:43 +00:00
Garrett Wollman 27a15c94ed Add support for pseudo-device LKMs. 1995-03-20 19:18:51 +00:00
Andreas Schulz 261bbea610 Don't do anything if BATCH is specified and the port is interactive for
the package target.The port may is not build and the package fails
otherwise.
1995-03-20 00:41:36 +00:00
Andreas Schulz 0bc6b9462b Change the xmkmf call to a xmkmf -a call. This should be more correct for
all X11R5 and X11R6 ports. This is the way how it should be normally
used according the manuals. Only pre-X1R5 ( X11R4, X11R3) ports can't
handle it.
1995-03-19 12:49:06 +00:00
Rodney W. Grimes 812a118139 Add protected and empty maninstall: targets.
Submitted by:	Philippe Charnier <charnier@lirmm.fr>
1995-03-10 08:54:42 +00:00
Andras Olah 1dcbf7af64 LIBPCAP -> ${DESTDIR}/usr/lib/libpcap.a 1995-03-08 09:01:32 +00:00
Gary Palmer 3c4d31f1c8 Add support to miss out ``DUDS'' subdirectories. See thread in freebsd-ports
for more.
1995-03-03 23:30:32 +00:00
Jordan K. Hubbard 0722449a9b Back out my previous change. I need to really think about this. 1995-03-03 07:42:10 +00:00
Jordan K. Hubbard 493d75a9d5 A small feature just for my own use. 1995-03-03 06:53:27 +00:00
Poul-Henning Kamp ffd87c071d "make distribute" have changed, beware if you use it. 1995-02-25 20:51:14 +00:00
Jordan K. Hubbard 664b5e14dc Always go to ${WRKDIR} before extraction. Modify the tar extract command
args to take advantage of this.
Pointed-out-by: asami
1995-02-17 08:52:55 +00:00
Gary Palmer 05002e8cb5 Make the checksum target not bomb out if there is a mismatch, just
print a warning. A better fix will come along just as soon as I
work out what it is.
1995-02-14 21:29:28 +00:00
Poul-Henning Kamp d80a026702 Make sure that info files never hit the "bin" dist. 1995-02-11 05:28:31 +00:00
Bruce Evans cdaec7b1a1 More complete implementation of SUBDIR for programs, libraries and kmods.
`depend' wasn't supported.  This seems to have only broken `make depend'
in gnu/usr.bin/ld.

bsd.prog.mk:
Build the man pages in ${MANDEPEND} at build time.
1995-02-08 21:35:31 +00:00
Jeffrey Hsu e687de7a15 Allow arbitrarily named configure script for use w/ HAS_CONFIGURE. 1995-02-06 08:52:19 +00:00