freebsd_amp_hwpstate/sys/arm/mv/mv_cp110_icu.c

461 lines
12 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2018 Rubicon Communications, LLC (Netgate)
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <machine/intr.h>
#include <dev/fdt/simplebus.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "pic_if.h"
#include "msi_if.h"
#define ICU_TYPE_NSR 1
#define ICU_TYPE_SEI 2
#define ICU_GRP_NSR 0x0
#define ICU_GRP_SR 0x1
#define ICU_GRP_SEI 0x4
#define ICU_GRP_REI 0x5
#define ICU_SETSPI_NSR_AL 0x10
#define ICU_SETSPI_NSR_AH 0x14
#define ICU_CLRSPI_NSR_AL 0x18
#define ICU_CLRSPI_NSR_AH 0x1c
#define ICU_SETSPI_SEI_AL 0x50
#define ICU_SETSPI_SEI_AH 0x54
#define ICU_INT_CFG(x) (0x100 + (x) * 4)
#define ICU_INT_ENABLE (1 << 24)
#define ICU_INT_EDGE (1 << 28)
#define ICU_INT_GROUP_SHIFT 29
#define ICU_INT_MASK 0x3ff
#define ICU_INT_SATA0 109
#define ICU_INT_SATA1 107
#define MV_CP110_ICU_MAX_NIRQS 207
#define MV_CP110_ICU_CLRSPI_OFFSET 0x8
struct mv_cp110_icu_softc {
device_t dev;
device_t parent;
struct resource *res;
struct intr_map_data_fdt *parent_map_data;
bool initialized;
int type;
};
static struct resource_spec mv_cp110_icu_res_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE | RF_SHAREABLE },
{ -1, 0 }
};
static struct ofw_compat_data compat_data[] = {
{"marvell,cp110-icu-nsr", ICU_TYPE_NSR},
{"marvell,cp110-icu-sei", ICU_TYPE_SEI},
{NULL, 0}
};
#define RD4(sc, reg) bus_read_4((sc)->res, (reg))
#define WR4(sc, reg, val) bus_write_4((sc)->res, (reg), (val))
static int
mv_cp110_icu_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
return (ENXIO);
device_set_desc(dev, "Marvell Interrupt Consolidation Unit");
return (BUS_PROBE_DEFAULT);
}
static int
mv_cp110_icu_attach(device_t dev)
{
struct mv_cp110_icu_softc *sc;
phandle_t node, msi_parent;
uint32_t reg, icu_grp;
int i;
sc = device_get_softc(dev);
sc->dev = dev;
node = ofw_bus_get_node(dev);
sc->type = (int)ofw_bus_search_compatible(dev, compat_data)->ocd_data;
sc->initialized = false;
if (OF_getencprop(node, "msi-parent", &msi_parent,
sizeof(phandle_t)) <= 0) {
device_printf(dev, "cannot find msi-parent property\n");
return (ENXIO);
}
if ((sc->parent = OF_device_from_xref(msi_parent)) == NULL) {
device_printf(dev, "cannot find msi-parent device\n");
return (ENXIO);
}
if (bus_alloc_resources(dev, mv_cp110_icu_res_spec, &sc->res) != 0) {
device_printf(dev, "cannot allocate resources for device\n");
return (ENXIO);
}
if (intr_pic_register(dev, OF_xref_from_node(node)) == NULL) {
device_printf(dev, "Cannot register ICU\n");
goto fail;
}
/* Allocate GICP/SEI compatible mapping entry (2 cells) */
sc->parent_map_data = (struct intr_map_data_fdt *)intr_alloc_map_data(
INTR_MAP_DATA_FDT, sizeof(struct intr_map_data_fdt) +
+ 3 * sizeof(phandle_t), M_WAITOK | M_ZERO);
/* Clear any previous mapping done by firmware. */
for (i = 0; i < MV_CP110_ICU_MAX_NIRQS; i++) {
reg = RD4(sc, ICU_INT_CFG(i));
icu_grp = reg >> ICU_INT_GROUP_SHIFT;
if (icu_grp == ICU_GRP_NSR || icu_grp == ICU_GRP_SEI)
WR4(sc, ICU_INT_CFG(i), 0);
}
return (0);
fail:
bus_release_resources(dev, mv_cp110_icu_res_spec, &sc->res);
return (ENXIO);
}
static struct intr_map_data *
mv_cp110_icu_convert_map_data(struct mv_cp110_icu_softc *sc, struct intr_map_data *data)
{
struct intr_map_data_fdt *daf;
uint32_t reg, irq_no, irq_type;
daf = (struct intr_map_data_fdt *)data;
if (daf->ncells != 2)
return (NULL);
irq_no = daf->cells[0];
if (irq_no >= MV_CP110_ICU_MAX_NIRQS)
return (NULL);
irq_type = daf->cells[1];
if (irq_type != IRQ_TYPE_LEVEL_HIGH &&
irq_type != IRQ_TYPE_EDGE_RISING)
return (NULL);
/* ICU -> GICP/SEI mapping is set in mv_cp110_icu_map_intr. */
reg = RD4(sc, ICU_INT_CFG(irq_no));
/* Construct GICP compatible mapping. */
sc->parent_map_data->ncells = 2;
sc->parent_map_data->cells[0] = reg & ICU_INT_MASK;
sc->parent_map_data->cells[1] = irq_type;
return ((struct intr_map_data *)sc->parent_map_data);
}
static int
mv_cp110_icu_detach(device_t dev)
{
return (EBUSY);
}
static int
mv_cp110_icu_activate_intr(device_t dev, struct intr_irqsrc *isrc,
struct resource *res, struct intr_map_data *data)
{
struct mv_cp110_icu_softc *sc;
sc = device_get_softc(dev);
data = mv_cp110_icu_convert_map_data(sc, data);
if (data == NULL)
return (EINVAL);
return (PIC_ACTIVATE_INTR(sc->parent, isrc, res, data));
}
static void
mv_cp110_icu_enable_intr(device_t dev, struct intr_irqsrc *isrc)
{
struct mv_cp110_icu_softc *sc;
sc = device_get_softc(dev);
PIC_ENABLE_INTR(sc->parent, isrc);
}
static void
mv_cp110_icu_disable_intr(device_t dev, struct intr_irqsrc *isrc)
{
struct mv_cp110_icu_softc *sc;
sc = device_get_softc(dev);
PIC_DISABLE_INTR(sc->parent, isrc);
}
static void
mv_cp110_icu_init(struct mv_cp110_icu_softc *sc, uint64_t addr)
{
if (sc->initialized)
return;
switch (sc->type) {
case ICU_TYPE_NSR:
WR4(sc, ICU_SETSPI_NSR_AL, addr & UINT32_MAX);
WR4(sc, ICU_SETSPI_NSR_AH, (addr >> 32) & UINT32_MAX);
addr += MV_CP110_ICU_CLRSPI_OFFSET;
WR4(sc, ICU_CLRSPI_NSR_AL, addr & UINT32_MAX);
WR4(sc, ICU_CLRSPI_NSR_AH, (addr >> 32) & UINT32_MAX);
break;
case ICU_TYPE_SEI:
WR4(sc, ICU_SETSPI_SEI_AL, addr & UINT32_MAX);
WR4(sc, ICU_SETSPI_SEI_AH, (addr >> 32) & UINT32_MAX);
break;
default:
panic("Unkown ICU type.");
}
sc->initialized = true;
}
static int
mv_cp110_icu_map_intr(device_t dev, struct intr_map_data *data,
struct intr_irqsrc **isrcp)
{
struct mv_cp110_icu_softc *sc;
struct intr_map_data_fdt *daf;
uint32_t vector, irq_no, irq_type;
uint64_t addr;
int ret;
sc = device_get_softc(dev);
if (data->type != INTR_MAP_DATA_FDT)
return (ENOTSUP);
/* Parse original */
daf = (struct intr_map_data_fdt *)data;
if (daf->ncells != 2)
return (EINVAL);
irq_no = daf->cells[0];
if (irq_no >= MV_CP110_ICU_MAX_NIRQS)
return (EINVAL);
irq_type = daf->cells[1];
if (irq_type != IRQ_TYPE_LEVEL_HIGH &&
irq_type != IRQ_TYPE_EDGE_RISING)
return (EINVAL);
/*
* Allocate MSI vector.
* We don't use intr_alloc_msi wrapper, since it registers a new irq
* in the kernel. In our case irq was already added by the ofw code.
*/
ret = MSI_ALLOC_MSI(sc->parent, dev, 1, 1, NULL, isrcp);
if (ret != 0)
return (ret);
ret = MSI_MAP_MSI(sc->parent, dev, *isrcp, &addr, &vector);
if (ret != 0)
goto fail;
mv_cp110_icu_init(sc, addr);
vector |= ICU_INT_ENABLE;
if (sc->type == ICU_TYPE_NSR)
vector |= ICU_GRP_NSR << ICU_INT_GROUP_SHIFT;
else
vector |= ICU_GRP_SEI << ICU_INT_GROUP_SHIFT;
if (irq_type & IRQ_TYPE_EDGE_BOTH)
vector |= ICU_INT_EDGE;
WR4(sc, ICU_INT_CFG(irq_no), vector);
/*
* SATA controller has two ports, each gets its own interrupt.
* The problem is that only one irq is described in dts.
* Also ahci_generic driver supports only one irq per controller.
* As a workaround map both interrupts when one of them is allocated.
* This allows us to use both SATA ports.
*/
if (irq_no == ICU_INT_SATA0)
WR4(sc, ICU_INT_CFG(ICU_INT_SATA1), vector);
if (irq_no == ICU_INT_SATA1)
WR4(sc, ICU_INT_CFG(ICU_INT_SATA0), vector);
(*isrcp)->isrc_dev = sc->dev;
return (ret);
fail:
if (*isrcp != NULL)
MSI_RELEASE_MSI(sc->parent, dev, 1, isrcp);
return (ret);
}
static int
mv_cp110_icu_deactivate_intr(device_t dev, struct intr_irqsrc *isrc,
struct resource *res, struct intr_map_data *data)
{
struct mv_cp110_icu_softc *sc;
struct intr_map_data_fdt *daf;
int irq_no, ret;
if (data->type != INTR_MAP_DATA_FDT)
return (ENOTSUP);
sc = device_get_softc(dev);
daf = (struct intr_map_data_fdt *)data;
if (daf->ncells != 2)
return (EINVAL);
irq_no = daf->cells[0];
data = mv_cp110_icu_convert_map_data(sc, data);
if (data == NULL)
return (EINVAL);
/* Clear the mapping. */
WR4(sc, ICU_INT_CFG(irq_no), 0);
ret = PIC_DEACTIVATE_INTR(sc->parent, isrc, res, data);
if (ret != 0)
return (ret);
return (MSI_RELEASE_MSI(sc->parent, dev, 1, &isrc));
}
static int
mv_cp110_icu_setup_intr(device_t dev, struct intr_irqsrc *isrc,
struct resource *res, struct intr_map_data *data)
{
struct mv_cp110_icu_softc *sc;
sc = device_get_softc(dev);
data = mv_cp110_icu_convert_map_data(sc, data);
if (data == NULL)
return (EINVAL);
return (PIC_SETUP_INTR(sc->parent, isrc, res, data));
}
static int
mv_cp110_icu_teardown_intr(device_t dev, struct intr_irqsrc *isrc,
struct resource *res, struct intr_map_data *data)
{
struct mv_cp110_icu_softc *sc;
sc = device_get_softc(dev);
data = mv_cp110_icu_convert_map_data(sc, data);
if (data == NULL)
return (EINVAL);
return (PIC_TEARDOWN_INTR(sc->parent, isrc, res, data));
}
static void
mv_cp110_icu_pre_ithread(device_t dev, struct intr_irqsrc *isrc)
{
struct mv_cp110_icu_softc *sc;
sc = device_get_softc(dev);
PIC_PRE_ITHREAD(sc->parent, isrc);
}
static void
mv_cp110_icu_post_ithread(device_t dev, struct intr_irqsrc *isrc)
{
struct mv_cp110_icu_softc *sc;
sc = device_get_softc(dev);
PIC_POST_ITHREAD(sc->parent, isrc);
}
static void
mv_cp110_icu_post_filter(device_t dev, struct intr_irqsrc *isrc)
{
struct mv_cp110_icu_softc *sc;
sc = device_get_softc(dev);
PIC_POST_FILTER(sc->parent, isrc);
}
static device_method_t mv_cp110_icu_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, mv_cp110_icu_probe),
DEVMETHOD(device_attach, mv_cp110_icu_attach),
DEVMETHOD(device_detach, mv_cp110_icu_detach),
/* Interrupt controller interface */
DEVMETHOD(pic_activate_intr, mv_cp110_icu_activate_intr),
DEVMETHOD(pic_disable_intr, mv_cp110_icu_disable_intr),
DEVMETHOD(pic_enable_intr, mv_cp110_icu_enable_intr),
DEVMETHOD(pic_map_intr, mv_cp110_icu_map_intr),
DEVMETHOD(pic_deactivate_intr, mv_cp110_icu_deactivate_intr),
DEVMETHOD(pic_setup_intr, mv_cp110_icu_setup_intr),
DEVMETHOD(pic_teardown_intr, mv_cp110_icu_teardown_intr),
DEVMETHOD(pic_post_filter, mv_cp110_icu_post_filter),
DEVMETHOD(pic_post_ithread, mv_cp110_icu_post_ithread),
DEVMETHOD(pic_pre_ithread, mv_cp110_icu_pre_ithread),
DEVMETHOD_END
};
static driver_t mv_cp110_icu_driver = {
"mv_cp110_icu",
mv_cp110_icu_methods,
sizeof(struct mv_cp110_icu_softc),
};
EARLY_DRIVER_MODULE(mv_cp110_icu, mv_cp110_icu_bus, mv_cp110_icu_driver, 0, 0,
BUS_PASS_INTERRUPT + BUS_PASS_ORDER_LAST);