1225 lines
38 KiB
Plaintext
1225 lines
38 KiB
Plaintext
##+M#########################################################################
|
|
# Adaptec 274x/284x/294x device driver for Linux and FreeBSD.
|
|
#
|
|
# Copyright (c) 1994 John Aycock
|
|
# The University of Calgary Department of Computer Science.
|
|
# All rights reserved.
|
|
#
|
|
# Modifications/enhancements:
|
|
# Copyright (c) 1994, 1995 Justin Gibbs. All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions, and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution.
|
|
# 3. All advertising materials mentioning features or use of this software
|
|
# must display the following acknowledgement:
|
|
# This product includes software developed by the University of Calgary
|
|
# Department of Computer Science and its contributors.
|
|
# 4. Neither the name of the University nor the names of its contributors
|
|
# may be used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
# SUCH DAMAGE.
|
|
#
|
|
# FreeBSD, Twin, Wide, 2 command per target support, tagged queuing and other
|
|
# optimizations provided by Justin T. Gibbs (gibbs@FreeBSD.org)
|
|
#
|
|
##-M#########################################################################
|
|
|
|
VERSION AIC7XXX_SEQ_VER "$Id: aic7xxx.seq,v 1.23 1995/10/29 05:56:31 gibbs Exp $"
|
|
|
|
SCBMASK = 0xff
|
|
|
|
SCSISEQ = 0x00
|
|
ENRSELI = 0x10
|
|
SXFRCTL0 = 0x01
|
|
ULTRAEN = 0x20
|
|
SXFRCTL1 = 0x02
|
|
SCSISIGI = 0x03
|
|
SCSISIGO = 0x03
|
|
SCSIRATE = 0x04
|
|
SCSIID = 0x05
|
|
SCSIDATL = 0x06
|
|
STCNT = 0x08
|
|
STCNT+0 = 0x08
|
|
STCNT+1 = 0x09
|
|
STCNT+2 = 0x0a
|
|
CLRSINT0 = 0x0b
|
|
SSTAT0 = 0x0b
|
|
SELDO = 0x40
|
|
SELDI = 0x20
|
|
CLRSINT1 = 0x0c
|
|
SSTAT1 = 0x0c
|
|
PHASEMIS = 0x10
|
|
SIMODE1 = 0x11
|
|
SCSIBUSL = 0x12
|
|
SHADDR = 0x14
|
|
SELID = 0x19
|
|
SBLKCTL = 0x1f
|
|
SEQCTL = 0x60
|
|
A = 0x64 # == ACCUM
|
|
SINDEX = 0x65
|
|
DINDEX = 0x66
|
|
ALLZEROS = 0x6a
|
|
NONE = 0x6a
|
|
SINDIR = 0x6c
|
|
DINDIR = 0x6d
|
|
FUNCTION1 = 0x6e
|
|
HADDR = 0x88
|
|
HADDR+1 = 0x89
|
|
HADDR+2 = 0x8a
|
|
HADDR+3 = 0x8b
|
|
HCNT = 0x8c
|
|
HCNT+0 = 0x8c
|
|
HCNT+1 = 0x8d
|
|
HCNT+2 = 0x8e
|
|
SCBPTR = 0x90
|
|
INTSTAT = 0x91
|
|
DFCNTRL = 0x93
|
|
DFSTATUS = 0x94
|
|
DFDAT = 0x99
|
|
QINFIFO = 0x9b
|
|
QINCNT = 0x9c
|
|
QOUTFIFO = 0x9d
|
|
|
|
SCSICONF_A = 0x5a
|
|
SCSICONF_B = 0x5b
|
|
|
|
# The two reserved bytes at SCBARRAY+1[23] are expected to be set to
|
|
# zero. Bit 3 in SCBARRAY+0 is used as an internal flag to indicate
|
|
# whether or not to DMA an SCB from host ram. This flag prevents the
|
|
# "re-fetching" of transactions that are requed because the target is
|
|
# busy with another command. We also use bits 6 & 7 to indicate whether
|
|
# or not to initiate SDTR or WDTR repectively when starting this command.
|
|
#
|
|
SCBARRAY+0 = 0xa0
|
|
|
|
DISCONNECTED = 0x04
|
|
NEEDDMA = 0x08
|
|
NEEDSDTR = 0x10
|
|
TAG_ENB = 0x20
|
|
DISCENB = 0x40
|
|
NEEDWDTR = 0x80
|
|
|
|
SCBARRAY+1 = 0xa1
|
|
SCBARRAY+2 = 0xa2
|
|
SCBARRAY+3 = 0xa3
|
|
SCBARRAY+4 = 0xa4
|
|
SCBARRAY+5 = 0xa5
|
|
SCBARRAY+6 = 0xa6
|
|
SCBARRAY+7 = 0xa7
|
|
SCBARRAY+8 = 0xa8
|
|
SCBARRAY+9 = 0xa9
|
|
SCBARRAY+10 = 0xaa
|
|
SCBARRAY+11 = 0xab
|
|
SCBARRAY+12 = 0xac
|
|
SCBARRAY+13 = 0xad
|
|
SCBARRAY+14 = 0xae
|
|
SCBARRAY+15 = 0xaf
|
|
SCBARRAY+16 = 0xb0
|
|
SCBARRAY+17 = 0xb1
|
|
SCBARRAY+18 = 0xb2
|
|
SCBARRAY+19 = 0xb3
|
|
SCBARRAY+20 = 0xb4
|
|
SCBARRAY+21 = 0xb5
|
|
SCBARRAY+22 = 0xb6
|
|
SCBARRAY+23 = 0xb7
|
|
SCBARRAY+24 = 0xb8
|
|
SCBARRAY+25 = 0xb9
|
|
SCBARRAY+26 = 0xba
|
|
SCBARRAY+27 = 0xbb
|
|
SCBARRAY+28 = 0xbc
|
|
SCBARRAY+29 = 0xbd
|
|
SCBARRAY+30 = 0xbe
|
|
|
|
BAD_PHASE = 0x01 # unknown scsi bus phase
|
|
CMDCMPLT = 0x02 # Command Complete
|
|
SEND_REJECT = 0x11 # sending a message reject
|
|
NO_IDENT = 0x21 # no IDENTIFY after reconnect
|
|
NO_MATCH = 0x31 # no cmd match for reconnect
|
|
MSG_SDTR = 0x41 # SDTR message recieved
|
|
MSG_WDTR = 0x51 # WDTR message recieved
|
|
MSG_REJECT = 0x61 # Reject message recieved
|
|
BAD_STATUS = 0x71 # Bad status from target
|
|
RESIDUAL = 0x81 # Residual byte count != 0
|
|
ABORT_TAG = 0x91 # Sent an ABORT_TAG message
|
|
AWAITING_MSG = 0xa1 # Kernel requested to specify
|
|
# a message to this target
|
|
# (command was null), so tell
|
|
# it that it can fill the
|
|
# message buffer.
|
|
IMMEDDONE = 0xb1
|
|
|
|
|
|
# The host adapter card (at least the BIOS) uses 20-2f for SCSI
|
|
# device information, 32-33 and 5a-5f as well. As it turns out, the
|
|
# BIOS trashes 20-2f, writing the synchronous negotiation results
|
|
# on top of the BIOS values, so we re-use those for our per-target
|
|
# scratchspace (actually a value that can be copied directly into
|
|
# SCSIRATE). The kernel driver will enable synchronous negotiation
|
|
# for all targets that have a value other than 0 in the lower four
|
|
# bits of the target scratch space. This should work regardless of
|
|
# whether the bios has been installed. NEEDSDTR and NEEDWDTR are the
|
|
# fouth and sevent bits of the SCB control byte. The kernel driver
|
|
# will set these when a WDTR or SDTR message should be sent to the
|
|
# target the SCB's command references.
|
|
#
|
|
# REJBYTE contains the first byte of a MESSAGE IN message, so the driver
|
|
# can report an intelligible error if a message is rejected.
|
|
#
|
|
# FLAGS's high bit is true if we are currently handling a reselect;
|
|
# its next-highest bit is true ONLY IF we've seen an IDENTIFY message
|
|
# from the reselecting target. If we haven't had IDENTIFY, then we have
|
|
# no idea what the lun is, and we can't select the right SCB register
|
|
# bank, so force a kernel panic if the target attempts a data in/out or
|
|
# command phase instead of corrupting something. FLAGS also contains
|
|
# configuration bits so that we can optimize for TWIN and WIDE controllers,
|
|
# the MAX_OFFSET bit which we set when we want to negotiate for maximum sync
|
|
# offset irregardless of what the per target scratch space says.
|
|
#
|
|
# Note that SG_NEXT occupies four bytes.
|
|
#
|
|
SYNCNEG = 0x20
|
|
|
|
REJBYTE = 0x31
|
|
DISC_DSB_A = 0x32
|
|
DISC_DSB_B = 0x33
|
|
|
|
MSG_LEN = 0x34
|
|
MSG_START+0 = 0x35
|
|
MSG_START+1 = 0x36
|
|
MSG_START+2 = 0x37
|
|
MSG_START+3 = 0x38
|
|
MSG_START+4 = 0x39
|
|
MSG_START+5 = 0x3a
|
|
-MSG_START+0 = 0xcb # 2's complement of MSG_START+0
|
|
|
|
ARG_1 = 0x4a # sdtr conversion args & return
|
|
BUS_16_BIT = 0x01
|
|
RETURN_1 = 0x4a
|
|
|
|
SIGSTATE = 0x4b # value written to SCSISIGO
|
|
|
|
# Linux users should use 0xc (12) for SG_SIZEOF
|
|
SG_SIZEOF = 0x8 # sizeof(struct ahc_dma)
|
|
#SG_SIZEOF = 0xc # sizeof(struct scatterlist)
|
|
SCB_SIZEOF = 0x1a # sizeof SCB to DMA (26 bytes)
|
|
|
|
DMAPARAMS = 0x4c # Parameters for DMA
|
|
SG_COUNT = 0x4d # working value of SG count
|
|
SG_NEXT = 0x4e # working value of SG pointer
|
|
SG_NEXT+0 = 0x4e
|
|
SG_NEXT+1 = 0x4f
|
|
SG_NEXT+2 = 0x50
|
|
SG_NEXT+3 = 0x51
|
|
|
|
SCBCOUNT = 0x52 # the actual number of SCBs
|
|
FLAGS = 0x53 # Device configuration flags
|
|
TWIN_BUS = 0x01
|
|
WIDE_BUS = 0x02
|
|
DPHASE = 0x04
|
|
MAX_OFFSET = 0x08
|
|
ACTIVE_MSG = 0x20
|
|
IDENTIFY_SEEN = 0x40
|
|
RESELECTED = 0x80
|
|
|
|
MAX_OFFSET_8BIT = 0x0f
|
|
MAX_OFFSET_WIDE = 0x08
|
|
|
|
ACTIVE_A = 0x54
|
|
ACTIVE_B = 0x55
|
|
SAVED_TCL = 0x56 # Temporary storage for the
|
|
# target/channel/lun of a
|
|
# reconnecting target
|
|
# After starting the selection hardware, we return to the "poll_for_work"
|
|
# loop so that we can check for reconnecting targets as well as for our
|
|
# selection to complete just in case the reselection wins bus arbitration.
|
|
# The problem with this is that we must keep track of the SCB that we've
|
|
# already pulled from the QINFIFO and started the selection on just in case
|
|
# the reselection wins so that we can retry the selection at a later time.
|
|
# This problem cannot be resolved by holding a single entry in scratch
|
|
# ram since a reconnecting target can request sense and this will create
|
|
# yet another SCB waiting for selection. The solution used here is to
|
|
# use byte 31 of the SCB as a psuedo-next pointer and to thread a list
|
|
# of SCBs that are awaiting selection. Since 0-0xfe are valid SCB offsets,
|
|
# SCB_LIST_NULL is 0xff which is out of range. The kernel driver must
|
|
# add an entry to this list everytime a request sense occurs. The sequencer
|
|
# will automatically consume the entries.
|
|
|
|
WAITING_SCBH = 0x57 # head of list of SCBs awaiting
|
|
# selection
|
|
WAITING_SCBT = 0x58 # tail of list of SCBs awaiting
|
|
# selection
|
|
SCB_LIST_NULL = 0xff
|
|
|
|
|
|
# Poll QINCNT for work - the lower bits contain
|
|
# the number of entries in the Queue In FIFO.
|
|
#
|
|
poll_for_work:
|
|
test FLAGS,TWIN_BUS jz start2 # Are we a twin channel device?
|
|
# For fairness, we check the other bus first, since we just finished a
|
|
# transaction on the current channel.
|
|
xor SBLKCTL,0x08 # Toggle to the other bus
|
|
test SSTAT0,SELDI jnz reselect
|
|
xor SBLKCTL,0x08 # Toggle to the original bus
|
|
start2:
|
|
test SSTAT0,SELDI jnz reselect
|
|
cmp WAITING_SCBH,SCB_LIST_NULL jne start_waiting
|
|
test QINCNT,SCBMASK jz poll_for_work
|
|
|
|
# We have at least one queued SCB now and we don't have any
|
|
# SCBs in the list of SCBs awaiting selection. Set the SCB
|
|
# pointer from the FIFO so we see the right bank of SCB
|
|
# registers, then set SCSI options and set the initiator and
|
|
# target SCSI IDs.
|
|
#
|
|
mov SCBPTR,QINFIFO
|
|
|
|
# If the control byte of this SCB has the NEEDDMA flag set, we have
|
|
# yet to DMA it from host memory
|
|
|
|
test SCBARRAY+0,NEEDDMA jz test_busy
|
|
clr HCNT+2
|
|
clr HCNT+1
|
|
mvi HCNT+0,SCB_SIZEOF
|
|
|
|
mvi DINDEX,HADDR
|
|
mvi SCBARRAY+26 call bcopy_4
|
|
|
|
mvi DFCNTRL,0xd # HDMAEN|DIRECTION|FIFORESET
|
|
|
|
# Wait for DMA from host memory to data FIFO to complete, then disable
|
|
# DMA and wait for it to acknowledge that it's off.
|
|
#
|
|
call dma_finish
|
|
|
|
# Copy the SCB from the FIFO to the SCBARRAY
|
|
|
|
mvi DINDEX, SCBARRAY+0
|
|
call bcopy_5_dfdat
|
|
call bcopy_7_dfdat
|
|
call bcopy_7_dfdat
|
|
call bcopy_7_dfdat
|
|
|
|
# See if there is not already an active SCB for this target. This code
|
|
# locks out on a per target basis instead of target/lun. Although this
|
|
# is not ideal for devices that have multiple luns active at the same
|
|
# time, it is faster than looping through all SCB's looking for active
|
|
# commands. It may be benificial to make findscb a more general procedure
|
|
# to see if the added cost of the search is negligible. This code also
|
|
# assumes that the kernel driver will clear the active flags on board
|
|
# initialization, board reset, and a target's SELTO.
|
|
|
|
test_busy:
|
|
and FUNCTION1,0x70,SCBARRAY+1
|
|
mov A,FUNCTION1
|
|
test SCBARRAY+1,0x88 jz test_a # Id < 8 && A channel
|
|
|
|
test ACTIVE_B,A jnz requeue
|
|
test SCBARRAY+0,TAG_ENB jnz start_scb
|
|
or ACTIVE_B,A # Mark the current target as busy
|
|
jmp start_scb
|
|
|
|
# Place the currently active back on the queue for later processing
|
|
requeue:
|
|
mov QINFIFO, SCBPTR
|
|
jmp poll_for_work
|
|
|
|
# Pull the first entry off of the waiting for selection list
|
|
start_waiting:
|
|
mov SCBPTR,WAITING_SCBH
|
|
jmp start_scb
|
|
|
|
test_a:
|
|
test ACTIVE_A,A jnz requeue
|
|
test SCBARRAY+0,TAG_ENB jnz start_scb
|
|
or ACTIVE_A,A # Mark the current target as busy
|
|
|
|
start_scb:
|
|
and SINDEX,0xf7,SBLKCTL #Clear the channel select bit
|
|
and A,0x08,SCBARRAY+1 #Get new channel bit
|
|
or SINDEX,A
|
|
mov SBLKCTL,SINDEX # select channel
|
|
mov SCBARRAY+1 call initialize_scsiid
|
|
|
|
# Enable selection phase as an initiator, and do automatic ATN
|
|
# after the selection. We do this now so that we can overlap the
|
|
# rest of our work to set up this target with the arbitration and
|
|
# selection bus phases.
|
|
#
|
|
start_selection:
|
|
or SCSISEQ,0x48 # ENSELO|ENAUTOATNO
|
|
mov WAITING_SCBH, SCBPTR
|
|
and FLAGS,0x3f # !RESELECTING
|
|
|
|
# As soon as we get a successful selection, the target should go
|
|
# into the message out phase since we have ATN asserted. Prepare
|
|
# the message to send, locking out the device driver. If the device
|
|
# driver hasn't beaten us with an ABORT or RESET message, then tack
|
|
# on an SDTR negotiation if required.
|
|
#
|
|
# Messages are stored in scratch RAM starting with a flag byte (high bit
|
|
# set means active message), one length byte, and then the message itself.
|
|
#
|
|
|
|
test SCBARRAY+11,0xff jnz identify # 0 Length Command?
|
|
|
|
# The kernel has sent us an SCB with no command attached. This implies
|
|
# that the kernel wants to send a message of some sort to this target,
|
|
# so we interrupt the driver, allow it to fill the message buffer, and
|
|
# then go back into the arbitration loop
|
|
mvi INTSTAT,AWAITING_MSG
|
|
jmp wait_for_selection
|
|
|
|
identify:
|
|
and A,DISCENB,SCBARRAY+0 # mask off disconnect privledge
|
|
|
|
and SINDEX,0x7,SCBARRAY+1 # lun
|
|
or SINDEX,A # or in disconnect privledge
|
|
or SINDEX,0x80 call mk_mesg # IDENTIFY message
|
|
|
|
mov A,SINDEX
|
|
test SCBARRAY+0,0xb0 jz !message # WDTR, SDTR or TAG??
|
|
cmp MSG_START+0,A jne !message # did driver beat us?
|
|
|
|
# Tag Message if Tag enabled in SCB control block. Use SCBPTR as the tag
|
|
# value
|
|
|
|
mk_tag:
|
|
mvi DINDEX, MSG_START+1
|
|
test SCBARRAY+0,TAG_ENB jz mk_tag_done
|
|
and A,0x23,SCBARRAY+0
|
|
mov DINDIR,A
|
|
mov DINDIR,SCBPTR
|
|
|
|
add MSG_LEN,-MSG_START+0,DINDEX # update message length
|
|
|
|
mk_tag_done:
|
|
|
|
mov DINDEX call mk_dtr # build DTR message if needed
|
|
|
|
!message:
|
|
wait_for_selection:
|
|
test SSTAT0,SELDI jnz reselect
|
|
test SSTAT0,SELDO jnz select
|
|
jmp wait_for_selection
|
|
|
|
# Reselection has been initiated by a target. Make a note that we've been
|
|
# reselected, but haven't seen an IDENTIFY message from the target
|
|
# yet.
|
|
#
|
|
reselect:
|
|
mov SELID call initialize_scsiid
|
|
and FLAGS,0x3f # reselected, no IDENTIFY
|
|
or FLAGS,RESELECTED jmp select2
|
|
|
|
# After the selection, remove this SCB from the "waiting for selection"
|
|
# list. This is achieved by simply moving our "next" pointer into
|
|
# WAITING_SCBH and setting our next pointer to null so that the next
|
|
# time this SCB is used, we don't get confused.
|
|
#
|
|
select:
|
|
or SCBARRAY+0,NEEDDMA
|
|
mov WAITING_SCBH,SCBARRAY+30
|
|
mvi SCBARRAY+30,SCB_LIST_NULL
|
|
select2:
|
|
call initialize_for_target
|
|
mvi SCSISEQ,ENRSELI
|
|
mvi CLRSINT0,0x60 # CLRSELDI|CLRSELDO
|
|
mvi CLRSINT1,0x8 # CLRBUSFREE
|
|
|
|
# Main loop for information transfer phases. If BSY is false, then
|
|
# we have a bus free condition, expected or not. Otherwise, wait
|
|
# for the target to assert REQ before checking MSG, C/D and I/O
|
|
# for the bus phase.
|
|
#
|
|
# We can't simply look at the values of SCSISIGI here (if we want
|
|
# to do synchronous data transfer), because the target won't assert
|
|
# REQ if it's already sent us some data that we haven't acknowledged
|
|
# yet.
|
|
#
|
|
ITloop:
|
|
test SSTAT1,0x8 jnz p_busfree # BUSFREE
|
|
test SSTAT1,0x1 jz ITloop # REQINIT
|
|
|
|
and A,0xe0,SCSISIGI # CDI|IOI|MSGI
|
|
|
|
mov A call scsisig
|
|
cmp ALLZEROS,A je p_dataout
|
|
cmp A,0x40 je p_datain
|
|
cmp A,0x80 je p_command
|
|
cmp A,0xc0 je p_status
|
|
cmp A,0xa0 je p_mesgout
|
|
cmp A,0xe0 je p_mesgin
|
|
|
|
mvi INTSTAT,BAD_PHASE # unknown - signal driver
|
|
|
|
p_dataout:
|
|
mvi DMAPARAMS,0x7d # WIDEODD|SCSIEN|SDMAEN|HDMAEN|
|
|
# DIRECTION|FIFORESET
|
|
jmp data_phase_init
|
|
|
|
# If we re-enter the data phase after going through another phase, the
|
|
# STCNT may have been cleared, so restore it from the residual field.
|
|
data_phase_reinit:
|
|
mvi DINDEX, STCNT
|
|
mvi SCBARRAY+15 call bcopy_3
|
|
jmp data_phase_loop
|
|
|
|
# Reads should not use WIDEODD since it may make the last byte for a SG segment
|
|
# go to the next segment.
|
|
p_datain:
|
|
mvi DMAPARAMS,0x79 # WIDEODD|SCSIEN|SDMAEN|HDMAEN|
|
|
# !DIRECTION|FIFORESET
|
|
data_phase_init:
|
|
call assert
|
|
|
|
test FLAGS, DPHASE jnz data_phase_reinit
|
|
call sg_scb2ram
|
|
or FLAGS, DPHASE # We have seen a data phase
|
|
|
|
data_phase_loop:
|
|
# If we are the last SG block, don't set wideodd.
|
|
cmp SG_COUNT,0x01 jne data_phase_wideodd
|
|
and DMAPARAMS, 0xbf # Turn off WIDEODD
|
|
data_phase_wideodd:
|
|
mov DMAPARAMS call dma
|
|
|
|
# Exit if we had an underrun
|
|
test SSTAT0,0x04 jz data_phase_finish # underrun STCNT != 0
|
|
|
|
# Advance the scatter-gather pointers if needed
|
|
#
|
|
sg_advance:
|
|
dec SG_COUNT # one less segment to go
|
|
|
|
test SG_COUNT, 0xff jz data_phase_finish #Are we done?
|
|
|
|
clr A # add sizeof(struct scatter)
|
|
add SG_NEXT+0,SG_SIZEOF,SG_NEXT+0
|
|
adc SG_NEXT+1,A,SG_NEXT+1
|
|
adc SG_NEXT+2,A,SG_NEXT+2
|
|
adc SG_NEXT+3,A,SG_NEXT+3
|
|
|
|
# Load a struct scatter and set up the data address and length.
|
|
# If the working value of the SG count is nonzero, then
|
|
# we need to load a new set of values.
|
|
#
|
|
# This, like all DMA's, assumes a little-endian host data storage.
|
|
#
|
|
sg_load:
|
|
clr HCNT+2
|
|
clr HCNT+1
|
|
mvi HCNT+0,SG_SIZEOF
|
|
|
|
mvi DINDEX,HADDR
|
|
mvi SG_NEXT call bcopy_4
|
|
|
|
mvi DFCNTRL,0xd # HDMAEN|DIRECTION|FIFORESET
|
|
|
|
# Wait for DMA from host memory to data FIFO to complete, then disable
|
|
# DMA and wait for it to acknowledge that it's off.
|
|
#
|
|
call dma_finish
|
|
|
|
# Copy data from FIFO into SCB data pointer and data count. This assumes
|
|
# that the struct scatterlist has this structure (this and sizeof(struct
|
|
# scatterlist) == 12 are asserted in aic7xxx.c):
|
|
#
|
|
# struct scatterlist {
|
|
# char *address; /* four bytes, little-endian order */
|
|
# ... /* four bytes, ignored */
|
|
# unsigned short length; /* two bytes, little-endian order */
|
|
# }
|
|
#
|
|
|
|
# Not in FreeBSD. the scatter list entry is only 8 bytes.
|
|
#
|
|
# struct ahc_dma_seg {
|
|
# physaddr addr; /* four bytes, little-endian order */
|
|
# long len; /* four bytes, little endian order */
|
|
# };
|
|
#
|
|
|
|
mvi DINDEX,HADDR
|
|
call bcopy_7_dfdat
|
|
|
|
# For Linux, we must throw away four bytes since there is a 32bit gap
|
|
# in the middle of a struct scatterlist
|
|
# call bcopy_4_dfdat
|
|
# mov NONE,DFDAT
|
|
# mov NONE,DFDAT
|
|
# mov NONE,DFDAT
|
|
# mov NONE,DFDAT
|
|
# call bcopy_3_dfdat #Only support 24 bit length.
|
|
|
|
# Load STCNT as well. It is a mirror of HCNT
|
|
mvi DINDEX,STCNT
|
|
mvi HCNT call bcopy_3
|
|
test SSTAT1,PHASEMIS jz data_phase_loop
|
|
|
|
data_phase_finish:
|
|
# After a DMA finishes, save the SG and STCNT residuals back into the SCB
|
|
# We use STCNT instead of HCNT, since it's a reflection of how many bytes
|
|
# were transferred on the SCSI (as opposed to the host) bus.
|
|
#
|
|
mvi DINDEX,SCBARRAY+15
|
|
mvi STCNT call bcopy_3
|
|
mov SCBARRAY+18, SG_COUNT
|
|
jmp ITloop
|
|
|
|
# Command phase. Set up the DMA registers and let 'er rip - the
|
|
# two bytes after the SCB SCSI_cmd_length are zeroed by the driver,
|
|
# so we can copy those three bytes directly into HCNT.
|
|
#
|
|
p_command:
|
|
call assert
|
|
|
|
# Load HADDR and HCNT. We can do this in one bcopy since they are neighbors
|
|
mvi DINDEX,HADDR
|
|
mvi SCBARRAY+7 call bcopy_7
|
|
|
|
mvi DINDEX,STCNT
|
|
mvi SCBARRAY+11 call bcopy_3
|
|
|
|
mvi 0x3d call dma # SCSIEN|SDMAEN|HDMAEN|
|
|
# DIRECTION|FIFORESET
|
|
jmp ITloop
|
|
|
|
# Status phase. Wait for the data byte to appear, then read it
|
|
# and store it into the SCB.
|
|
#
|
|
p_status:
|
|
|
|
mvi SCBARRAY+14 call inb_first
|
|
jmp mesgin_done
|
|
|
|
# Message out phase. If there is no active message, but the target
|
|
# took us into this phase anyway, build a no-op message and send it.
|
|
#
|
|
p_mesgout:
|
|
mvi 0x8 call mk_mesg # build NOP message
|
|
|
|
clr STCNT+2
|
|
clr STCNT+1
|
|
|
|
# Set up automatic PIO transfer from MSG_START. Bit 3 in
|
|
# SXFRCTL0 (SPIOEN) is already on.
|
|
#
|
|
mvi SINDEX,MSG_START+0
|
|
mov DINDEX,MSG_LEN
|
|
|
|
# When target asks for a byte, drop ATN if it's the last one in
|
|
# the message. Otherwise, keep going until the message is exhausted.
|
|
# (We can't use outb for this since it wants the input in SINDEX.)
|
|
#
|
|
# Keep an eye out for a phase change, in case the target issues
|
|
# a MESSAGE REJECT.
|
|
#
|
|
p_mesgout2:
|
|
test SSTAT0,0x2 jz p_mesgout2 # SPIORDY
|
|
test SSTAT1,0x10 jnz p_mesgout6 # PHASEMIS
|
|
|
|
cmp DINDEX,1 jne p_mesgout3 # last byte?
|
|
mvi CLRSINT1,0x40 # CLRATNO - drop ATN
|
|
|
|
# Write a byte to the SCSI bus. The AIC-7770 refuses to automatically
|
|
# send ACKs in automatic PIO or DMA mode unless you make sure that the
|
|
# "expected" bus phase in SCSISIGO matches the actual bus phase. This
|
|
# behaviour is completely undocumented and caused me several days of
|
|
# grief.
|
|
#
|
|
# After plugging in different drives to test with and using a longer
|
|
# SCSI cable, I found that I/O in Automatic PIO mode ceased to function,
|
|
# especially when transferring >1 byte. It seems to be much more stable
|
|
# if STCNT is set to one before the transfer, and SDONE (in SSTAT0) is
|
|
# polled for transfer completion - for both output _and_ input. The
|
|
# only theory I have is that SPIORDY doesn't drop right away when SCSIDATL
|
|
# is accessed (like the documentation says it does), and that on a longer
|
|
# cable run, the sequencer code was fast enough to loop back and see
|
|
# an SPIORDY that hadn't dropped yet.
|
|
#
|
|
p_mesgout3:
|
|
mvi STCNT+0, 0x01
|
|
mov SCSIDATL,SINDIR
|
|
|
|
p_mesgout4:
|
|
test SSTAT0,0x4 jz p_mesgout4 # SDONE
|
|
dec DINDEX
|
|
test DINDEX,0xff jnz p_mesgout2
|
|
|
|
# If the next bus phase after ATN drops is a message out, it means
|
|
# that the target is requesting that the last message(s) be resent.
|
|
#
|
|
p_mesgout5:
|
|
test SSTAT1,0x8 jnz p_mesgout6 # BUSFREE
|
|
test SSTAT1,0x1 jz p_mesgout5 # REQINIT
|
|
|
|
and A,0xe0,SCSISIGI # CDI|IOI|MSGI
|
|
cmp A,0xa0 jne p_mesgout6
|
|
or SINDEX,0x10,SIGSTATE # turn on ATNO
|
|
call scsisig # ATNO - re-assert ATN
|
|
|
|
jmp ITloop
|
|
|
|
p_mesgout6:
|
|
mvi CLRSINT1,0x40 # CLRATNO - in case of PHASEMIS
|
|
and FLAGS,0xdf # no active msg
|
|
jmp ITloop
|
|
|
|
# Message in phase. Bytes are read using Automatic PIO mode, but not
|
|
# using inb. This alleviates a race condition, namely that if ATN had
|
|
# to be asserted under Automatic PIO mode, it had to beat the SCSI
|
|
# circuitry sending an ACK to the target. This showed up under heavy
|
|
# loads and really confused things, since ABORT commands wouldn't be
|
|
# seen by the drive after an IDENTIFY message in until it had changed
|
|
# to a data I/O phase.
|
|
#
|
|
p_mesgin:
|
|
mvi A call inb_first # read the 1st message byte
|
|
mvi REJBYTE,A # save it for the driver
|
|
|
|
test A,0x80 jnz mesgin_identify # identify message?
|
|
cmp A,4 je mesgin_disconnect # disconnect?
|
|
cmp A,2 je mesgin_sdptrs # save data pointers?
|
|
cmp ALLZEROS,A je mesgin_complete # command complete?
|
|
cmp A,3 je mesgin_rdptrs # restore pointers code?
|
|
cmp A,1 je mesgin_extended # extended message?
|
|
cmp A,7 je mesgin_reject # message reject code?
|
|
|
|
rej_mesgin:
|
|
# We have no idea what this message in is, and there's no way
|
|
# to pass it up to the kernel, so we issue a message reject and
|
|
# hope for the best. Since we're now using manual PIO mode to
|
|
# read in the message, there should no longer be a race condition
|
|
# present when we assert ATN. In any case, rejection should be a
|
|
# rare occurrence - signal the driver when it happens.
|
|
#
|
|
or SINDEX,0x10,SIGSTATE # turn on ATNO
|
|
call scsisig
|
|
mvi INTSTAT,SEND_REJECT # let driver know
|
|
|
|
mvi 0x7 call mk_mesg # MESSAGE REJECT message
|
|
|
|
mesgin_done:
|
|
call inb_last # ack & turn auto PIO back on
|
|
jmp ITloop
|
|
|
|
|
|
mesgin_complete:
|
|
# We got a "command complete" message, so put the SCB pointer
|
|
# into the Queue Out, and trigger a completion interrupt.
|
|
# Check status for non zero return and interrupt driver if needed
|
|
# This allows the driver to interpret errors only when they occur
|
|
# instead of always uploading the scb. If the status is SCSI_CHECK,
|
|
# the driver will download a new scb requesting sense to replace
|
|
# the old one, modify the "waiting for selection" SCB list and set
|
|
# RETURN_1 to 0x80. If RETURN_1 is set to 0x80 the sequencer imediately
|
|
# jumps to main loop where it will run down the waiting SCB list.
|
|
# If the kernel driver does not wish to request sense, it need
|
|
# only clear RETURN_1, and the command is allowed to complete. We don't
|
|
# bother to post to the QOUTFIFO in the error case since it would require
|
|
# extra work in the kernel driver to ensure that the entry was removed
|
|
# before the command complete code tried processing it.
|
|
|
|
# First check for residuals
|
|
test SCBARRAY+18,0xff jnz resid
|
|
|
|
check_status:
|
|
test SCBARRAY+14,0xff jz status_ok # 0 Status?
|
|
mvi INTSTAT,BAD_STATUS # let driver know
|
|
test RETURN_1, 0x80 jz status_ok
|
|
jmp mesgin_done
|
|
|
|
status_ok:
|
|
# First, mark this target as free.
|
|
test SCBARRAY+0,TAG_ENB jnz complete # Tagged command
|
|
and FUNCTION1,0x70,SCBARRAY+1
|
|
mov A,FUNCTION1
|
|
test SCBARRAY+1,0x88 jz clear_a
|
|
xor ACTIVE_B,A
|
|
jmp immediate
|
|
|
|
clear_a:
|
|
xor ACTIVE_A,A
|
|
|
|
immediate:
|
|
test SCBARRAY+11,0xff jnz complete # Immediate message complete
|
|
# Pause the sequencer until the driver gets around to handling the command
|
|
# complete. This is so that any action that might require carefull timing
|
|
# with the completion of this command can occur.
|
|
mvi INTSTAT,IMMEDDONE
|
|
jmp poll_for_work
|
|
complete:
|
|
mov QOUTFIFO,SCBPTR
|
|
mvi INTSTAT,CMDCMPLT
|
|
jmp mesgin_done
|
|
|
|
# If we have a residual count, interrupt and tell the host. Other
|
|
# alternatives are to pause the sequencer on all command completes (yuck),
|
|
# dma the resid directly to the host (slick, but a ton of instructions), or
|
|
# have the sequencer pause itself when it encounters a non-zero resid
|
|
# (unecessary pause just to flag the command -- yuck, but takes few instructions
|
|
# and since it shouldn't happen that often is good enough for our purposes).
|
|
|
|
resid:
|
|
mvi INTSTAT,RESIDUAL
|
|
jmp check_status
|
|
|
|
# Is it an extended message? We only support the synchronous and wide data
|
|
# transfer request messages, which will probably be in response to
|
|
# WDTR or SDTR message outs from us. If it's not SDTR or WDTR, reject it -
|
|
# apparently this can be done after any message in byte, according
|
|
# to the SCSI-2 spec.
|
|
#
|
|
mesgin_extended:
|
|
mvi ARG_1 call inb_next # extended message length
|
|
mvi A call inb_next # extended message code
|
|
|
|
cmp A,1 je p_mesginSDTR # Syncronous negotiation message
|
|
cmp A,3 je p_mesginWDTR # Wide negotiation message
|
|
jmp rej_mesgin
|
|
|
|
p_mesginWDTR:
|
|
cmp ARG_1,2 jne rej_mesgin # extended mesg length=2
|
|
mvi A call inb_next # Width of bus
|
|
mvi INTSTAT,MSG_WDTR # let driver know
|
|
test RETURN_1,0x80 jz mesgin_done# Do we need to send WDTR?
|
|
|
|
# We didn't initiate the wide negotiation, so we must respond to the request
|
|
and RETURN_1,0x7f # Clear the SEND_WDTR Flag
|
|
or FLAGS,ACTIVE_MSG
|
|
mvi DINDEX,MSG_START+0
|
|
mvi MSG_START+0 call mk_wdtr # build WDTR message
|
|
or SINDEX,0x10,SIGSTATE # turn on ATNO
|
|
call scsisig
|
|
jmp mesgin_done
|
|
|
|
p_mesginSDTR:
|
|
cmp ARG_1,3 jne rej_mesgin # extended mesg length=3
|
|
mvi ARG_1 call inb_next # xfer period
|
|
mvi A call inb_next # REQ/ACK offset
|
|
mvi INTSTAT,MSG_SDTR # call driver to convert
|
|
|
|
test RETURN_1,0xc0 jz mesgin_done# Do we need to mk_sdtr or rej?
|
|
test RETURN_1,0x40 jnz rej_mesgin # Requested SDTR too small - rej
|
|
or FLAGS,ACTIVE_MSG
|
|
mvi DINDEX, MSG_START+0
|
|
mvi MSG_START+0 call mk_sdtr
|
|
or SINDEX,0x10,SIGSTATE # turn on ATNO
|
|
call scsisig
|
|
jmp mesgin_done
|
|
|
|
# Is it a disconnect message? Set a flag in the SCB to remind us
|
|
# and await the bus going free.
|
|
#
|
|
mesgin_disconnect:
|
|
or SCBARRAY+0,DISCONNECTED
|
|
jmp mesgin_done
|
|
|
|
# Save data pointers message? Copy working values into the SCB,
|
|
# usually in preparation for a disconnect.
|
|
#
|
|
mesgin_sdptrs:
|
|
call sg_ram2scb
|
|
jmp mesgin_done
|
|
|
|
# Restore pointers message? Data pointers are recopied from the
|
|
# SCB anytime we enter a data phase for the first time, so all
|
|
# we need to do is clear the DPHASE flag and let the data phase
|
|
# code do the rest.
|
|
#
|
|
mesgin_rdptrs:
|
|
and FLAGS,0xfb # !DPHASE we'll reload them
|
|
# the next time through
|
|
jmp mesgin_done
|
|
|
|
# Identify message? For a reconnecting target, this tells us the lun
|
|
# that the reconnection is for - find the correct SCB and switch to it,
|
|
# clearing the "disconnected" bit so we don't "find" it by accident later.
|
|
#
|
|
mesgin_identify:
|
|
test A,0x78 jnz rej_mesgin # !DiscPriv|!LUNTAR|!Reserved
|
|
|
|
and A,0x07 # lun in lower three bits
|
|
or SAVED_TCL,A,SELID
|
|
and SAVED_TCL,0xf7
|
|
and A,0x08,SBLKCTL # B Channel??
|
|
or SAVED_TCL,A
|
|
call inb_last # ACK
|
|
mov ALLZEROS call findSCB
|
|
setup_SCB:
|
|
and SCBARRAY+0,0xfb # clear disconnect bit in SCB
|
|
or FLAGS,IDENTIFY_SEEN # make note of IDENTIFY
|
|
|
|
jmp ITloop
|
|
get_tag:
|
|
mvi A call inb_first
|
|
cmp A,0x20 jne return # Simple Tag message?
|
|
mvi A call inb_next
|
|
call inb_last
|
|
test A,0xf0 jnz abort_tag # Tag in range?
|
|
mov SCBPTR,A
|
|
mov A,SAVED_TCL
|
|
cmp SCBARRAY+1,A jne abort_tag
|
|
test SCBARRAY+0,TAG_ENB jz abort_tag
|
|
ret
|
|
abort_tag:
|
|
or SINDEX,0x10,SIGSTATE # turn on ATNO
|
|
call scsisig
|
|
mvi INTSTAT,ABORT_TAG # let driver know
|
|
mvi 0xd call mk_mesg # ABORT TAG message
|
|
ret
|
|
|
|
# Message reject? Let the kernel driver handle this. If we have an
|
|
# outstanding WDTR or SDTR negotiation, assume that it's a response from
|
|
# the target selecting 8bit or asynchronous transfer, otherwise just ignore
|
|
# it since we have no clue what it pertains to.
|
|
#
|
|
mesgin_reject:
|
|
mvi INTSTAT, MSG_REJECT
|
|
jmp mesgin_done
|
|
|
|
# [ ADD MORE MESSAGE HANDLING HERE ]
|
|
#
|
|
|
|
# Bus free phase. It might be useful to interrupt the device
|
|
# driver if we aren't expecting this. For now, make sure that
|
|
# ATN isn't being asserted and look for a new command.
|
|
#
|
|
p_busfree:
|
|
mvi CLRSINT1,0x40 # CLRATNO
|
|
clr SIGSTATE
|
|
|
|
# if this is an immediate command, perform a psuedo command complete to
|
|
# notify the driver.
|
|
test SCBARRAY+11,0xff jz status_ok
|
|
jmp poll_for_work
|
|
|
|
# Instead of a generic bcopy routine that requires an argument, we unroll
|
|
# the cases that are actually used, and call them explicitly. This
|
|
# not only reduces the overhead of doing a bcopy, but ends up saving space
|
|
# in the program since you don't have to put the argument into the accumulator
|
|
# before the call. Both functions expect DINDEX to contain the destination
|
|
# address and SINDEX to contain the source address.
|
|
bcopy_7:
|
|
mov DINDIR,SINDIR
|
|
mov DINDIR,SINDIR
|
|
bcopy_5:
|
|
mov DINDIR,SINDIR
|
|
bcopy_4:
|
|
mov DINDIR,SINDIR
|
|
bcopy_3:
|
|
mov DINDIR,SINDIR
|
|
mov DINDIR,SINDIR
|
|
mov DINDIR,SINDIR ret
|
|
|
|
bcopy_7_dfdat:
|
|
mov DINDIR,DFDAT
|
|
mov DINDIR,DFDAT
|
|
bcopy_5_dfdat:
|
|
mov DINDIR,DFDAT
|
|
bcopy_4_dfdat:
|
|
mov DINDIR,DFDAT
|
|
bcopy_3_dfdat:
|
|
mov DINDIR,DFDAT
|
|
mov DINDIR,DFDAT
|
|
mov DINDIR,DFDAT ret
|
|
|
|
# Locking the driver out, build a one-byte message passed in SINDEX
|
|
# if there is no active message already. SINDEX is returned intact.
|
|
#
|
|
mk_mesg:
|
|
mvi SEQCTL,0x50 # PAUSEDIS|FASTMODE
|
|
test FLAGS,ACTIVE_MSG jnz mk_mesg1 # active message?
|
|
|
|
or FLAGS,ACTIVE_MSG # if not, there is now
|
|
mvi MSG_LEN,1 # length = 1
|
|
mov MSG_START+0,SINDEX # 1-byte message
|
|
|
|
mk_mesg1:
|
|
mvi SEQCTL,0x10 ret # !PAUSEDIS|FASTMODE
|
|
|
|
# Carefully read data in Automatic PIO mode. I first tried this using
|
|
# Manual PIO mode, but it gave me continual underrun errors, probably
|
|
# indicating that I did something wrong, but I feel more secure leaving
|
|
# Automatic PIO on all the time.
|
|
#
|
|
# According to Adaptec's documentation, an ACK is not sent on input from
|
|
# the target until SCSIDATL is read from. So we wait until SCSIDATL is
|
|
# latched (the usual way), then read the data byte directly off the bus
|
|
# using SCSIBUSL. When we have pulled the ATN line, or we just want to
|
|
# acknowledge the byte, then we do a dummy read from SCISDATL. The SCSI
|
|
# spec guarantees that the target will hold the data byte on the bus until
|
|
# we send our ACK.
|
|
#
|
|
# The assumption here is that these are called in a particular sequence,
|
|
# and that REQ is already set when inb_first is called. inb_{first,next}
|
|
# use the same calling convention as inb.
|
|
#
|
|
inb_first:
|
|
clr STCNT+2
|
|
clr STCNT+1
|
|
mov DINDEX,SINDEX
|
|
mov DINDIR,SCSIBUSL ret # read byte directly from bus
|
|
|
|
inb_next:
|
|
mov DINDEX,SINDEX # save SINDEX
|
|
|
|
mvi STCNT+0,1 # xfer one byte
|
|
mov NONE,SCSIDATL # dummy read from latch to ACK
|
|
inb_next1:
|
|
test SSTAT0,0x4 jz inb_next1 # SDONE
|
|
inb_next2:
|
|
test SSTAT0,0x2 jz inb_next2 # SPIORDY - wait for next byte
|
|
mov DINDIR,SCSIBUSL ret # read byte directly from bus
|
|
|
|
inb_last:
|
|
mvi STCNT+0,1 # ACK with dummy read
|
|
mov NONE,SCSIDATL
|
|
inb_last1:
|
|
test SSTAT0,0x4 jz inb_last1 # wait for completion
|
|
ret
|
|
|
|
# DMA data transfer. HADDR and HCNT must be loaded first, and
|
|
# SINDEX should contain the value to load DFCNTRL with - 0x3d for
|
|
# host->scsi, or 0x39 for scsi->host. The SCSI channel is cleared
|
|
# during initialization.
|
|
#
|
|
dma:
|
|
mov DFCNTRL,SINDEX
|
|
dma1:
|
|
test SSTAT0,0x1 jnz dma3 # DMADONE
|
|
test SSTAT1,0x10 jz dma1 # PHASEMIS, ie. underrun
|
|
|
|
# We will be "done" DMAing when the transfer count goes to zero, or
|
|
# the target changes the phase (in light of this, it makes sense that
|
|
# the DMA circuitry doesn't ACK when PHASEMIS is active). If we are
|
|
# doing a SCSI->Host transfer, the data FIFO should be flushed auto-
|
|
# magically on STCNT=0 or a phase change, so just wait for FIFO empty
|
|
# status.
|
|
#
|
|
dma3:
|
|
test SINDEX,0x4 jnz dma5 # DIRECTION
|
|
dma4:
|
|
test DFSTATUS,0x1 jz dma4 # !FIFOEMP
|
|
|
|
# Now shut the DMA enables off and make sure that the DMA enables are
|
|
# actually off first lest we get an ILLSADDR.
|
|
#
|
|
dma5:
|
|
and DFCNTRL, 0x40, SINDEX # disable DMA, but maintain
|
|
# WIDEODD
|
|
dma6:
|
|
test DFCNTRL,0x38 jnz dma6 # SCSIENACK|SDMAENACK|HDMAENACK
|
|
|
|
ret
|
|
|
|
dma_finish:
|
|
test DFSTATUS,0x8 jz dma_finish # HDONE
|
|
|
|
clr DFCNTRL # disable DMA
|
|
dma_finish2:
|
|
test DFCNTRL,0x8 jnz dma_finish2 # HDMAENACK
|
|
ret
|
|
|
|
# Common SCSI initialization for selection and reselection. Expects
|
|
# the target SCSI ID to be in the upper four bits of SINDEX, and A's
|
|
# contents are stomped on return.
|
|
#
|
|
initialize_scsiid:
|
|
and SINDEX,0xf0 # Get target ID
|
|
and A,0x0f,SCSIID
|
|
or SINDEX,A
|
|
mov SCSIID,SINDEX ret
|
|
|
|
initialize_for_target:
|
|
# Set CLRCHN here before the target has entered a data transfer mode -
|
|
# with synchronous SCSI, if you do it later, you blow away some
|
|
# data in the SCSI FIFO that the target has already sent to you.
|
|
#
|
|
clr SIGSTATE
|
|
|
|
or SXFRCTL0,0x02 # CLRCHN
|
|
|
|
# Make sure that the system knows we have not been through a DATA
|
|
# phase.
|
|
and FLAGS, 0xfb # !DPHASE
|
|
|
|
# Initialize SCSIRATE with the appropriate value for this target.
|
|
#
|
|
call ndx_dtr
|
|
mov SCSIRATE,SINDIR ret
|
|
|
|
# Assert that if we've been reselected, then we've seen an IDENTIFY
|
|
# message.
|
|
#
|
|
assert:
|
|
test FLAGS,RESELECTED jz return # reselected?
|
|
test FLAGS,IDENTIFY_SEEN jnz return # seen IDENTIFY?
|
|
|
|
mvi INTSTAT,NO_IDENT ret # no - cause a kernel panic
|
|
|
|
# Locate the SCB matching the target ID/channel/lun in SAVED_TCL and switch
|
|
# the SCB to it. Have the kernel print a warning message if it can't be
|
|
# found, and generate an ABORT message to the target. SINDEX should be
|
|
# cleared on call.
|
|
#
|
|
findSCB:
|
|
mov A,SAVED_TCL
|
|
mov SCBPTR,SINDEX # switch to new SCB
|
|
cmp SCBARRAY+1,A jne findSCB1 # target ID/channel/lun match?
|
|
test SCBARRAY+0,DISCONNECTED jz findSCB1 # should be disconnected
|
|
test SCBARRAY+0,TAG_ENB jnz get_tag
|
|
ret
|
|
|
|
findSCB1:
|
|
inc SINDEX
|
|
mov A,SCBCOUNT
|
|
cmp SINDEX,A jne findSCB
|
|
|
|
mvi INTSTAT,NO_MATCH # not found - signal kernel
|
|
mvi 0x6 call mk_mesg # ABORT message
|
|
|
|
or SINDEX,0x10,SIGSTATE # assert ATNO
|
|
call scsisig
|
|
ret
|
|
|
|
# Make a working copy of the scatter-gather parameters from the SCB.
|
|
#
|
|
sg_scb2ram:
|
|
mvi DINDEX,HADDR
|
|
mvi SCBARRAY+19 call bcopy_7
|
|
|
|
mvi DINDEX,STCNT
|
|
mvi SCBARRAY+23 call bcopy_3
|
|
|
|
mov SG_COUNT,SCBARRAY+2
|
|
|
|
mvi DINDEX,SG_NEXT
|
|
mvi SCBARRAY+3 call bcopy_4
|
|
ret
|
|
|
|
# Copying RAM values back to SCB, for Save Data Pointers message, but
|
|
# only if we've actually been into a data phase to change them. This
|
|
# protects against bogus data in scratch ram and the residual counts
|
|
# since they are only initialized when we go into data_in or data_out.
|
|
#
|
|
sg_ram2scb:
|
|
test FLAGS, DPHASE jz return
|
|
mov SCBARRAY+2,SG_COUNT
|
|
|
|
mvi DINDEX,SCBARRAY+3
|
|
mvi SG_NEXT call bcopy_4
|
|
|
|
mvi DINDEX,SCBARRAY+19
|
|
mvi SHADDR call bcopy_4
|
|
|
|
# Use the residual number since STCNT is corrupted by any message transfer
|
|
mvi SCBARRAY+15 call bcopy_3
|
|
ret
|
|
|
|
# Add the array base SYNCNEG to the target offset (the target address
|
|
# is in SCSIID), and return the result in SINDEX. The accumulator
|
|
# contains the 3->8 decoding of the target ID on return.
|
|
#
|
|
ndx_dtr:
|
|
shr A,SCSIID,4
|
|
test SBLKCTL,0x08 jz ndx_dtr_2
|
|
or A,0x08 # Channel B entries add 8
|
|
ndx_dtr_2:
|
|
add SINDEX,SYNCNEG,A
|
|
|
|
and FUNCTION1,0x70,SCSIID # 3-bit target address decode
|
|
mov A,FUNCTION1 ret
|
|
|
|
# If we need to negotiate transfer parameters, build the WDTR or SDTR message
|
|
# starting at the address passed in SINDEX. DINDEX is modified on return.
|
|
# The SCSI-II spec requires that Wide negotiation occur first and you can
|
|
# only negotiat one or the other at a time otherwise in the event of a message
|
|
# reject, you wouldn't be able to tell which message was the culpret.
|
|
#
|
|
mk_dtr:
|
|
test SCBARRAY+0,0x90 jz return # NEEDWDTR|NEEDSDTR
|
|
test SCBARRAY+0,NEEDWDTR jnz mk_wdtr_16bit
|
|
or FLAGS, MAX_OFFSET # Force an offset of 15 or 8 if WIDE
|
|
|
|
mk_sdtr:
|
|
mvi DINDIR,1 # extended message
|
|
mvi DINDIR,3 # extended message length = 3
|
|
mvi DINDIR,1 # SDTR code
|
|
call sdtr_to_rate
|
|
mov DINDIR,RETURN_1 # REQ/ACK transfer period
|
|
test FLAGS, MAX_OFFSET jnz mk_sdtr_max_offset
|
|
and DINDIR,0x0f,SINDIR # Sync Offset
|
|
|
|
mk_sdtr_done:
|
|
add MSG_LEN,-MSG_START+0,DINDEX ret # update message length
|
|
|
|
mk_sdtr_max_offset:
|
|
# We're initiating sync negotiation, so request the max offset we can (15 or 8)
|
|
xor FLAGS, MAX_OFFSET
|
|
test SCSIRATE, 0x80 jnz wmax_offset # Talking to a WIDE device?
|
|
mvi DINDIR, MAX_OFFSET_8BIT
|
|
jmp mk_sdtr_done
|
|
|
|
wmax_offset:
|
|
mvi DINDIR, MAX_OFFSET_WIDE
|
|
jmp mk_sdtr_done
|
|
|
|
mk_wdtr_16bit:
|
|
mvi ARG_1,BUS_16_BIT
|
|
mk_wdtr:
|
|
mvi DINDIR,1 # extended message
|
|
mvi DINDIR,2 # extended message length = 2
|
|
mvi DINDIR,3 # WDTR code
|
|
mov DINDIR,ARG_1 # bus width
|
|
|
|
add MSG_LEN,-MSG_START+0,DINDEX ret # update message length
|
|
|
|
# Set SCSI bus control signal state. This also saves the last-written
|
|
# value into a location where the higher-level driver can read it - if
|
|
# it has to send an ABORT or RESET message, then it needs to know this
|
|
# so it can assert ATN without upsetting SCSISIGO. The new value is
|
|
# expected in SINDEX. Change the actual state last to avoid contention
|
|
# from the driver.
|
|
#
|
|
scsisig:
|
|
mov SIGSTATE,SINDEX
|
|
mov SCSISIGO,SINDEX ret
|
|
|
|
sdtr_to_rate:
|
|
call ndx_dtr # index scratch space for target
|
|
shr A,SINDIR,0x4
|
|
dec SINDEX #Preserve SINDEX
|
|
and A,0x7
|
|
clr RETURN_1
|
|
sdtr_to_rate_loop:
|
|
test A,0x0f jz sdtr_to_rate_done
|
|
add RETURN_1,0x18
|
|
dec A
|
|
jmp sdtr_to_rate_loop
|
|
sdtr_to_rate_done:
|
|
shr RETURN_1,0x2
|
|
add RETURN_1,0x18
|
|
test SXFRCTL0,ULTRAEN jz return
|
|
shr RETURN_1,0x1
|
|
return:
|
|
ret
|