51 lines
1.6 KiB
Plaintext
51 lines
1.6 KiB
Plaintext
Installation notes for the ii ISDN Interface
|
|
for FreeBSD Release 1.0
|
|
08.Oct.1994
|
|
|
|
1. Login as root
|
|
|
|
2. Use vipw to create a login isdn. It has to be an alias to root.
|
|
the login directory has to be /isdn:
|
|
isdn:*:0:0:Bourne-again Superuser:/isdn:
|
|
|
|
3. The ISDN Interface supports the NICCY 3008 , NICCY 3009 and the
|
|
NICCY 5000. Please see /sys/i386/conf/LINT for more details on
|
|
how to enable a given ISDN adapter for your system.
|
|
|
|
4. You have to edit some files for your local installation:
|
|
6.1 /usr/sbin/sisdn
|
|
6.2 /usr/share/isdn/isdn.ip
|
|
6.3 /etc/remote
|
|
6.4 /etc/ttys
|
|
|
|
5. Install the new kernel and reboot your system.
|
|
|
|
6. Login as isdn and start
|
|
sisdn
|
|
|
|
|
|
Configuration of NICCY 3008.
|
|
|
|
The 3008 is an 8bit card. It uses shared memory and does not support or
|
|
is not supported by a 16bit card in the same 8 ( or 16K ) area of shared memory.
|
|
|
|
As configured it is running using the I/O adress of COM3, Interupt 5 and
|
|
the shared memory at 0xde000.
|
|
But Interupt 5 is occupied by ne1000, ne2000 and WDxxxx ethernet cards. The
|
|
WDxxxx cards use shared memory in the 0xdxxxx region.
|
|
|
|
That is why I configured the kernel for the 3008 to use COM3, interupt 2/9
|
|
and shared memory at 0xe0000. You have to jumper:
|
|
|
|
B7 B4a B4b B1a B1b B1c B1d
|
|
|
|
|
|
Problems with the NICCY 5000.
|
|
|
|
The 5000 was constructed for the MAC. So it has this strange MAC-SCSI connector.
|
|
When connecting to an Adaptec you have to buy a cable which connects to MAC-SCSI
|
|
and a terminator for the MAC-SCSI. Be shure to terminate the SCSI-Bus
|
|
correctly !!!!!!!!!!!!!!!!!!!!!!!!!!! Older Versions of the NICCY will not run
|
|
on Adaptec with enabled boot rom. Disable boot rom or/and get a new set of
|
|
rom for the 5000.
|