1520 lines
52 KiB
C
1520 lines
52 KiB
C
/*
|
|
* Copyright (c) 1998, Larry Lile
|
|
* All rights reserved.
|
|
*
|
|
* For latest sources and information on this driver, please
|
|
* go to http://anarchy.stdio.com.
|
|
*
|
|
* Questions, comments or suggestions should be directed to
|
|
* Larry Lile <lile@stdio.com>.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: if_oltr.c,v 1.3 1999/04/21 07:02:19 peter Exp $
|
|
*/
|
|
|
|
|
|
#include "pci.h"
|
|
#include "oltr.h"
|
|
#include "opt_inet.h"
|
|
#include "bpfilter.h"
|
|
|
|
#if (NOLTR + NPCI) > 0
|
|
|
|
/*#define TRlldInlineIO*/
|
|
|
|
#define ISA_ADAPTERS (OC_3115 | OC_3117 | OC_3118)
|
|
#define PCI_ADAPTERS (OC_3133 | OC_3136 | OC_3137 | \
|
|
OC_3139 | OC_3140 | OC_3141 | \
|
|
OC_3250 | OC_3540 )
|
|
|
|
#define PCI_VENDOR_OLICOM 0x108D
|
|
|
|
char *AdapterName[] = {
|
|
/* 0 */ "Olicom XT Adapter [unsupported]",
|
|
/* 1 */ "Olicom OC-3115",
|
|
/* 2 */ "Olicom ISA 16/4 Adapter (OC-3117)",
|
|
/* 3 */ "Olicom ISA 16/4 Adapter (OC-3118)",
|
|
/* 4 */ "Olicom MCA 16/4 Adapter (OC-3129) [unsupported]",
|
|
/* 5 */ "Olicom MCA 16/4 Adapter (OC-3129) [unsupported]",
|
|
/* 6 */ "Olicom MCA 16/4 Adapter (OC-3129) [unsupported]",
|
|
/* 7 */ "Olicom EISA 16/4 Adapter (OC-3133)",
|
|
/* 8 */ "Olicom EISA 16/4 Adapter (OC-3133)",
|
|
/* 9 */ "Olicom EISA 16/4 Server Adapter (OC-3135)",
|
|
/* 10 */ "Olicom PCI 16/4 Adapter (OC-3136)",
|
|
/* 11 */ "Olicom PCI 16/4 Adapter (OC-3136)",
|
|
/* 12 */ "Olicom PCI/II 16/4 Adapter (OC-3137)",
|
|
/* 13 */ "Olicom PCI 16/4 Adapter (OC-3139)",
|
|
/* 14 */ "Olicom RapidFire 3140 16/4 PCI Adapter (OC-3140)",
|
|
/* 15 */ "Olicom RapidFire 3141 Fiber Adapter (OC-3141)",
|
|
/* 16 */ "Olicom PCMCIA 16/4 Adapter (OC-3220) [unsupported]",
|
|
/* 17 */ "Olicom PCMCIA 16/4 Adapter (OC-3121, OC-3230, OC-3232) [unsupported]",
|
|
/* 18 */ "Olicom PCMCIA 16/4 Adapter (OC-3250)",
|
|
/* 19 */ "Olicom RapidFire 3540 4/16/100 Adapter (OC-3540)"
|
|
};
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/interrupt.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/iso88025.h>
|
|
#include <net/if_media.h>
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#if NPNP > 0
|
|
#include <i386/isa/pnp.h>
|
|
#endif
|
|
|
|
#include <machine/clock.h>
|
|
#include <machine/md_var.h>
|
|
#include <i386/isa/isa_device.h>
|
|
|
|
#if NPCI > 0
|
|
#include <pci/pcivar.h>
|
|
#include <pci/pcireg.h>
|
|
#endif
|
|
|
|
#include "contrib/dev/oltr/trlld.h"
|
|
|
|
#ifndef TRLLD_SPEED_AUTO
|
|
#define TRLLD_SPEED_AUTO 0
|
|
#endif
|
|
|
|
#define MIN(A,B) (((A) < (B)) ? (A) : (B))
|
|
#define MIN3(A,B,C) (MIN(A, (MIN(B, C))))
|
|
|
|
void *oltr_malloc(ssize_t, TRlldAdapterConfig_t *);
|
|
|
|
/*
|
|
* Glue functions prototypes for PMW kit IO
|
|
*/
|
|
|
|
#ifndef TRlldInlineIO
|
|
static void DriverOutByte __P((unsigned short, unsigned char));
|
|
static void DriverOutWord __P((unsigned short, unsigned short));
|
|
static void DriverOutDword __P((unsigned short, unsigned long));
|
|
static void DriverRepOutByte __P((unsigned short, unsigned char *, int));
|
|
static void DriverRepOutWord __P((unsigned short, unsigned short *, int));
|
|
static void DriverRepOutDword __P((unsigned short, unsigned long *, int));
|
|
static unsigned char DriverInByte __P((unsigned short));
|
|
static unsigned short DriverInWord __P((unsigned short));
|
|
static unsigned long DriverInDword __P((unsigned short));
|
|
static void DriverRepInByte __P((unsigned short, unsigned char *, int));
|
|
static void DriverRepInWord __P((unsigned short, unsigned short *, int));
|
|
static void DriverRepInDword __P((unsigned short, unsigned long *, int));
|
|
#endif /*TRlldInlineIO*/
|
|
static void DriverSuspend __P((unsigned short));
|
|
static void DriverStatus __P((void *, TRlldStatus_t *));
|
|
static void DriverCloseCompleted __P((void *));
|
|
static void DriverStatistics __P((void *, TRlldStatistics_t *));
|
|
static void DriverTransmitFrameCompleted __P((void *, void *, int));
|
|
static void DriverReceiveFrameCompleted __P((void *, int, int, void *, int));
|
|
|
|
typedef struct tx_buf {
|
|
int index;
|
|
int count;
|
|
char *buf;
|
|
struct mbuf *m;
|
|
} tx_buf_t;
|
|
|
|
typedef struct rx_buf {
|
|
int index;
|
|
char *buf;
|
|
} rx_buf_t;
|
|
|
|
#ifndef EXTRA_OLTR
|
|
#if NPCI > 0
|
|
#define EXTRA_OLTR 8
|
|
#else
|
|
#define EXTRA_OLTR 0
|
|
#endif /* NPCI */
|
|
#endif /* EXTRA_OLTR */
|
|
|
|
#ifndef OLTR_PROMISC_MODE
|
|
#define OLTR_PROMISC_MODE (TRLLD_PROM_LLC)
|
|
#endif
|
|
|
|
#define ALL_OPTIONS (IFM_TOK_ETR | IFM_TOK_SRCRT | IFM_TOK_ALLR | IFM_TOK_DTR | IFM_TOK_CLASSIC | IFM_TOK_AUTO)
|
|
|
|
/* List sizes MUST be a power of 2 */
|
|
#define TX_LIST_SIZE 16
|
|
#define RX_LIST_SIZE 16
|
|
#define TX_LIST_MASK (TX_LIST_SIZE - 1)
|
|
#define RX_LIST_MASK (RX_LIST_SIZE - 1)
|
|
#define RX_BUFFER_LEN (8*1024)
|
|
#define TX_BUFFER_LEN (8*1024)
|
|
|
|
struct oltr_softc {
|
|
struct arpcom arpcom;
|
|
struct ifmedia ifmedia;
|
|
TRlldAdapterConfig_t *config;
|
|
TRlldAdapter_t *TRlldAdapter;
|
|
int unit;
|
|
u_short PromiscMode;
|
|
u_short AdapterMode;
|
|
int hw_state;
|
|
#define HW_UNKNOWN 0 /* initial/absent state */
|
|
#define HW_FOUND 1 /* found, not initialized */
|
|
#define HW_BAD 2 /* fatal error */
|
|
#define HW_FAILED 3 /* closed eg. by remove, allow manual reopen */
|
|
#define HW_LOADING 4
|
|
#define HW_CLOSING 5
|
|
#define HW_CLOSING2 6
|
|
#define HW_CLOSED 7
|
|
#define HW_OPENING 8
|
|
#define HW_OPEN 9
|
|
#define HW_ERROR 10 /* temporary error */
|
|
|
|
u_long GroupAddress;
|
|
u_long FunctionalAddress;
|
|
int poll_adapter;
|
|
|
|
int tx_next;
|
|
int tx_avail;
|
|
tx_buf_t tx_buffer[TX_LIST_SIZE];
|
|
TRlldTransmit_t tx_frame;
|
|
|
|
int rx_next;
|
|
int rx_avail;
|
|
rx_buf_t rx_buffer[RX_LIST_SIZE];
|
|
|
|
struct callout_handle oltr_ch;
|
|
struct callout_handle poll_ch;
|
|
|
|
};
|
|
|
|
static struct oltr_softc oltr_softc[NOLTR + EXTRA_OLTR];
|
|
|
|
/*
|
|
* Driver function prototypes
|
|
*/
|
|
|
|
static int oltr_probe __P((struct isa_device *));
|
|
static int oltr_attach __P((struct isa_device *));
|
|
static void oltr_init __P((struct oltr_softc *));
|
|
static void oltr_intr __P((int));
|
|
static void oltr_start __P((struct ifnet *));
|
|
static void oltr_stop __P((struct oltr_softc *));
|
|
static int oltr_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
|
|
static int oltr_attach_common __P((struct oltr_softc *));
|
|
|
|
void oltr_timeout __P((void *));
|
|
void adapter_poll __P((void *));
|
|
|
|
struct isa_driver oltrdriver = {
|
|
oltr_probe,
|
|
oltr_attach,
|
|
"oltr",
|
|
0
|
|
};
|
|
|
|
int isa_cards = 0;
|
|
|
|
#if NPCI > 0
|
|
static u_long oltr_count = NOLTR;
|
|
static const char *oltr_pci_probe __P((pcici_t, pcidi_t));
|
|
static void oltr_pci_attach __P((pcici_t, int));
|
|
static void oltr_pci_intr __P((void *));
|
|
static void oltr_pci_shutdown __P((int, void *));
|
|
|
|
static struct pci_device oltr_device = {
|
|
"oltr",
|
|
oltr_pci_probe,
|
|
oltr_pci_attach,
|
|
&oltr_count,
|
|
NULL
|
|
};
|
|
|
|
#ifndef COMPAT_PCI_DRIVER
|
|
DATA_SET(pcidevice_set, oltr_device);
|
|
#else
|
|
COMPAT_PCI_DRIVER(oltr_pci, oltr_device);
|
|
#endif /* COMPAT_PCI_DRIVER */
|
|
int pci_cards = 0;
|
|
#endif /* NPCI */
|
|
|
|
static int oltr_ifmedia_upd __P((struct ifnet *));
|
|
static void oltr_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
|
|
|
|
static TRlldDriver_t oltrLldDriver = {
|
|
TRLLD_VERSION,
|
|
#ifndef TRlldInlineIO
|
|
DriverOutByte,
|
|
DriverOutWord,
|
|
DriverOutDword,
|
|
DriverRepOutByte,
|
|
DriverRepOutWord,
|
|
DriverRepOutDword,
|
|
DriverInByte,
|
|
DriverInWord,
|
|
DriverInDword,
|
|
DriverRepInByte,
|
|
DriverRepInWord,
|
|
DriverRepInDword,
|
|
#endif /*TRlldInlineIO*/
|
|
DriverSuspend,
|
|
DriverStatus,
|
|
DriverCloseCompleted,
|
|
DriverStatistics,
|
|
DriverTransmitFrameCompleted,
|
|
DriverReceiveFrameCompleted,
|
|
};
|
|
|
|
TRlldAdapterConfig_t oltr_config[NOLTR + EXTRA_OLTR];
|
|
|
|
void *
|
|
oltr_malloc(Size, Adapter)
|
|
ssize_t Size;
|
|
TRlldAdapterConfig_t *Adapter;
|
|
{
|
|
|
|
/* If the adapter needs memory below 16M for DMA then use contigmalloc */
|
|
if (Adapter->mode & TRLLD_MODE_16M) /* Adapter using ISA DMA buffer below 16M */
|
|
return(contigmalloc(Size, M_DEVBUF, M_NOWAIT, 0ul, 0xfffffful, 1ul, 0x10000ul));
|
|
else
|
|
return(malloc(Size, M_DEVBUF, M_NOWAIT));
|
|
}
|
|
|
|
/*
|
|
* Driver Functions
|
|
*/
|
|
|
|
static int
|
|
oltr_probe(is)
|
|
struct isa_device *is;
|
|
{
|
|
static int find_completed = 0, assigned[NOLTR];
|
|
struct oltr_softc *sc = &oltr_softc[is->id_unit];
|
|
int i;
|
|
|
|
printf("oltr%d: oltr_probe\n", is->id_unit);
|
|
|
|
/* Make life easy, use the Olicom supplied find function on the first probe
|
|
* to probe all of the ISA adapters. Then give them to each unit as requested.
|
|
* Try to match the adapters to units based on the iobase, but if iobase? then
|
|
* just give out the next available adapter.
|
|
*/
|
|
if (!find_completed) {
|
|
isa_cards = TRlldFind(&oltrLldDriver, &oltr_config[0], ISA_ADAPTERS, NOLTR);
|
|
/*for (i = 0; i < isa_cards; i++) {
|
|
printf("TRlldFind: card %d - %s MAC %6D\n", i + 1, AdapterName[oltr_config[i].type], oltr_config[i].macaddress, ":");
|
|
}*/
|
|
for (i = 0; i < NOLTR; i++)
|
|
assigned[i] = 0;
|
|
find_completed = 1;
|
|
}
|
|
|
|
sc->unit = is->id_unit;
|
|
sc->hw_state = HW_UNKNOWN;
|
|
|
|
if (find_completed && ((isa_cards == 0) || (is->id_unit > isa_cards)))
|
|
return(0);
|
|
|
|
if (((is->id_iobase < 0xa00) || (is->id_iobase > 0xbe0)) && (is->id_iobase != 0xffffffff)) {
|
|
printf("oltr%d: port address impossible (0x%X)\n", is->id_unit, is->id_iobase);
|
|
return(0);
|
|
}
|
|
|
|
/* Auto assign lowest available card not already in use */
|
|
if (is->id_iobase == 0xffffffff) {
|
|
printf("oltr%d: auto assigning card.\n", is->id_unit);
|
|
for (i = 0; assigned[i]; i++);
|
|
assigned[i] = 1;
|
|
sc->config = &oltr_config[i];
|
|
is->id_iobase = sc->config->iobase0; /* Claim our port space */
|
|
if (!is->id_irq)
|
|
is->id_irq = (1 << sc->config->interruptlevel); /* Claim our interrupt */
|
|
is->id_intr = (inthand2_t *)oltr_intr;
|
|
if ((is->id_drq == 0xffffffff) && (sc->config->dmalevel != TRLLD_DMA_PIO))
|
|
is->id_drq = sc->config->dmalevel; /* Claim our dma channel */
|
|
printf("oltr%d: <%s> [%6D]\n", is->id_unit, AdapterName[sc->config->type], sc->config->macaddress, ":");
|
|
sc->hw_state = HW_FOUND;
|
|
return(1);
|
|
} else {
|
|
/* Assign based on iobase address provided in kernel config */
|
|
for (i = 0; i < NOLTR; i++) {
|
|
if (is->id_iobase == oltr_config[i].iobase0) {
|
|
if (assigned[i]) {
|
|
printf("oltr%d: adapter (0x%X) already assigned.\n", is->id_unit, is->id_iobase);
|
|
return(0);
|
|
}
|
|
assigned[i] = 1;
|
|
sc->config = &oltr_config[i];
|
|
if (is->id_irq == 0)
|
|
is->id_irq = (1 << sc->config->interruptlevel); /* Claim our interrupt */
|
|
is->id_intr = (inthand2_t *)oltr_intr;
|
|
if ((is->id_drq == 0xffffffff) && (sc->config->dmalevel != TRLLD_DMA_PIO))
|
|
is->id_drq = sc->config->dmalevel; /* Claim our dma channel */
|
|
printf("oltr%d: <%s> [%6D]\n", is->id_unit, AdapterName[sc->config->type], sc->config->macaddress, ":");
|
|
sc->hw_state = HW_FOUND;
|
|
return(1);
|
|
}
|
|
}
|
|
}
|
|
return(0); /* Card was not found */
|
|
}
|
|
|
|
#if NPCI > 0
|
|
static const char *
|
|
oltr_pci_probe(config_id, device_id)
|
|
pcici_t config_id;
|
|
pcidi_t device_id;
|
|
{
|
|
u_char PCIConfigurationSpace[64];
|
|
u_long command;
|
|
int i, j, rc;
|
|
|
|
printf("oltr: oltr_pci_probe\n");
|
|
|
|
j = NOLTR + pci_cards;
|
|
|
|
if (pci_cards == EXTRA_OLTR)
|
|
return(NULL);
|
|
|
|
if (((device_id & 0xffff) == PCI_VENDOR_OLICOM) &&
|
|
((((device_id >> 16) & 0xffff) == 0x0001) ||
|
|
(((device_id >> 16) & 0xffff) == 0x0004) ||
|
|
(((device_id >> 16) & 0xffff) == 0x0005) ||
|
|
(((device_id >> 16) & 0xffff) == 0x0007) ||
|
|
(((device_id >> 16) & 0xffff) == 0x0008))) {
|
|
|
|
for (i = 0; i < 64; i++)
|
|
PCIConfigurationSpace[i] = pci_cfgread(config_id, i, /*bytes*/1);
|
|
|
|
rc = TRlldPCIConfig(&oltrLldDriver, &oltr_config[j], PCIConfigurationSpace);
|
|
|
|
if ((rc == TRLLD_PCICONFIG_OK) || (rc == TRLLD_PCICONFIG_SET_COMMAND)) {
|
|
if (rc == TRLLD_PCICONFIG_SET_COMMAND) {
|
|
printf("oltr: setting bus-master mode\n");
|
|
command = pci_conf_read(config_id, PCIR_COMMAND);
|
|
pci_conf_write(config_id, PCIR_COMMAND, (command | PCIM_CMD_BUSMASTEREN));
|
|
}
|
|
pci_cards++;
|
|
return (AdapterName[oltr_config[j].type]);
|
|
} else {
|
|
if (rc == TRLLD_PCICONFIG_FAIL)
|
|
printf("oltr: TRlldPCIConfig failed!\n");
|
|
if (rc == TRLLD_PCICONFIG_VERSION)
|
|
printf("oltr: wrong LLD version\n");
|
|
}
|
|
}
|
|
return(NULL);
|
|
}
|
|
#endif /* NPCI */
|
|
|
|
static int
|
|
oltr_attach(is)
|
|
struct isa_device *is;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[is->id_unit];
|
|
int rc;
|
|
|
|
sc->unit = is->id_unit;
|
|
|
|
if (!oltr_attach_common(sc))
|
|
return(0);
|
|
|
|
/* If the kernel config does not match the current card configuration then
|
|
* adjust the card settings to match the kernel.
|
|
*/
|
|
if ((ffs(is->id_irq) - 1) != sc->config->interruptlevel) {
|
|
rc = TRlldSetInterrupt(sc->TRlldAdapter, is->id_irq);
|
|
if (rc != TRLLD_CONFIG_OK) {
|
|
printf("oltr%d: Unable to change adapter interrupt level (%x)\n", sc->unit, rc);
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
/* Set dma level, fall back to pio if possible. (following SCO driver example) */
|
|
if (is->id_drq != sc->config->dmalevel) {
|
|
rc = TRlldSetDMA(sc->TRlldAdapter, is->id_drq, &sc->config->mode);
|
|
if (rc != TRLLD_CONFIG_OK) {
|
|
if ((sc->config->dmalevel != TRLLD_DMA_PIO) &&
|
|
(TRlldSetDMA(sc->TRlldAdapter, TRLLD_DMA_PIO, &sc->config->mode) != TRLLD_CONFIG_OK)) {
|
|
printf("oltr%d: unable to change dma level from %d to %d (%x)\n", sc->unit,
|
|
sc->config->dmalevel, is->id_drq, rc);
|
|
}
|
|
printf("oltr%d: Unable to change adapter dma level, using PIO mode (%x)\n", sc->unit, rc);
|
|
sc->config->dmalevel = TRLLD_DMA_PIO;
|
|
rc = TRlldSetDMA(sc->TRlldAdapter, is->id_drq, &sc->config->mode);
|
|
}
|
|
is->id_irq = sc->config->dmalevel;
|
|
}
|
|
return(1);
|
|
}
|
|
|
|
#if NPCI > 0
|
|
static void
|
|
oltr_pci_attach(config_id, unit)
|
|
pcici_t config_id;
|
|
int unit;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[unit];
|
|
|
|
sc->unit = unit;
|
|
sc->config = &oltr_config[unit];
|
|
sc->hw_state = HW_FOUND;
|
|
|
|
printf("oltr%d: mac address [%6D]\n", sc->unit, sc->config->macaddress, ":");
|
|
|
|
if (!oltr_attach_common(sc))
|
|
return;
|
|
|
|
/* Map our interrupt */
|
|
if (!pci_map_int(config_id, oltr_pci_intr, sc, &net_imask)) {
|
|
printf("oltr%d: couldn't map interrupt\n", unit);
|
|
return;
|
|
}
|
|
}
|
|
#endif /* NPCI */
|
|
|
|
static int
|
|
oltr_attach_common(sc)
|
|
struct oltr_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
u_int bufsize;
|
|
int rc, i, j;
|
|
|
|
/*printf("oltr%d: attach_common called\n", sc->unit);*/
|
|
|
|
/* Allocate adapter memory buffer */
|
|
bufsize = TRlldAdapterSize();
|
|
sc->TRlldAdapter = (TRlldAdapter_t *)oltr_malloc(bufsize, sc->config);
|
|
if (sc->TRlldAdapter == NULL) {
|
|
printf("oltr%d: Unable to allocate adapter memory block (%d bytes)\n", sc->unit, bufsize);
|
|
}
|
|
/*printf("oltr%d: Adapter memory block (%p %d bytes)\n", sc->unit, sc->TRlldAdapter, bufsize);*/
|
|
|
|
/* Setup transmit pool */
|
|
for (i = 0; i < TX_LIST_SIZE; i++) {
|
|
sc->tx_buffer[i].index = i;
|
|
sc->tx_buffer[i].buf = (char *)oltr_malloc(TX_BUFFER_LEN, sc->config);
|
|
/* If we have a failure then free everything and get out */
|
|
if (!sc->tx_buffer[i].buf) {
|
|
printf("oltr%d: Unable to allocate transmit buffers.\n", sc->unit);
|
|
for (j = 0; j < i; j++)
|
|
free(sc->tx_buffer[j].buf, M_DEVBUF);
|
|
return(0);
|
|
}
|
|
}
|
|
sc->tx_next = 0;
|
|
sc->tx_avail = TX_LIST_SIZE;
|
|
sc->tx_frame.FragmentCount = 0;
|
|
|
|
/* Setup receive pool */
|
|
for (i = 0; i < RX_LIST_SIZE; i++) {
|
|
sc->rx_buffer[i].index = i;
|
|
sc->rx_buffer[i].buf = (char *)oltr_malloc(RX_BUFFER_LEN, sc->config);
|
|
/* If we have a failure then free everything and get out */
|
|
if (!sc->rx_buffer[i].buf) {
|
|
printf("oltr%d: Unable to allocate receive buffers.\n", sc->unit);
|
|
for (j = 0; j < i; j++)
|
|
free(sc->rx_buffer[j].buf, M_DEVBUF);
|
|
return(0);
|
|
}
|
|
}
|
|
sc->rx_next = 0;
|
|
sc->rx_avail = RX_LIST_SIZE;
|
|
/*printf("oltr%d: Allocated receive buffers\n", sc->unit); */
|
|
|
|
/* Set up adapter polling mechanism */
|
|
sc->poll_adapter = 1;
|
|
callout_handle_init(&sc->poll_ch);
|
|
sc->poll_ch = timeout(adapter_poll, (void *)sc->unit, (1*hz)/1000);
|
|
callout_handle_init(&sc->oltr_ch);
|
|
|
|
/* Initialize adapter */
|
|
rc = TRlldAdapterInit(&oltrLldDriver, sc->TRlldAdapter, kvtop(sc->TRlldAdapter),
|
|
(void *)sc->unit, sc->config);
|
|
if (rc != TRLLD_INIT_OK) {
|
|
switch (rc) {
|
|
case TRLLD_INIT_NOT_FOUND:
|
|
printf("oltr%d: Adapter not found or malfunctioning.\n", sc->unit);
|
|
sc->hw_state = HW_BAD;
|
|
return(0);
|
|
case TRLLD_INIT_UNSUPPORTED:
|
|
printf("oltr%d: Adapter not supported by low level driver.\n", sc->unit);
|
|
sc->hw_state = HW_UNKNOWN;
|
|
return(0);
|
|
case TRLLD_INIT_PHYS16:
|
|
printf("oltr%d: Adapter memory block above 16M, must be below 16M.\n", sc->unit);
|
|
return(0);
|
|
case TRLLD_INIT_VERSION:
|
|
printf("oltr%d: Low level driver version mismatch.\n", sc->unit);
|
|
return(0);
|
|
default:
|
|
printf("oltr%d: Unknown initilization error occoured (%x).\n", sc->unit, rc);
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
/* Download Adapter Microcode */
|
|
/*printf("oltr%d: Downloading adapter microcode...", sc->unit);*/
|
|
sc->hw_state = HW_LOADING;
|
|
switch(sc->config->mactype) {
|
|
case TRLLD_MAC_TMS: /* TMS microcode */
|
|
rc = TRlldDownload(sc->TRlldAdapter, TRlldMacCode);
|
|
break;
|
|
case TRLLD_MAC_HAWKEYE: /* Hawkeye microcode */
|
|
rc = TRlldDownload(sc->TRlldAdapter, TRlldHawkeyeMac);
|
|
break;
|
|
case TRLLD_MAC_BULLSEYE: /* Bullseye microcode */
|
|
rc = TRlldDownload(sc->TRlldAdapter, TRlldBullseyeMac);
|
|
break;
|
|
default:
|
|
printf("oltr%d: unknown mactype %d\n", sc->unit, sc->config->mactype);
|
|
return(0);
|
|
}
|
|
/*if (rc == TRLLD_DOWNLOAD_OK)
|
|
printf("done\n");*/
|
|
if ((rc == TRLLD_DOWNLOAD_ERROR) || (rc == TRLLD_STATE)) {
|
|
printf("oltr%d: Adapter microcode download failed! (rc = %x)\n", sc->unit, rc);
|
|
sc->hw_state = HW_BAD;
|
|
return(0);
|
|
}
|
|
|
|
TRlldSetSpeed(sc->TRlldAdapter, TRLLD_SPEED_AUTO);
|
|
|
|
sc->PromiscMode = 0;
|
|
sc->AdapterMode = 0;
|
|
|
|
/* Do the ifnet initialization */
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = sc->unit;
|
|
ifp->if_name = "oltr";
|
|
ifp->if_output = iso88025_output;
|
|
ifp->if_init = (if_init_f_t *)oltr_init;
|
|
ifp->if_start = oltr_start;
|
|
ifp->if_ioctl = oltr_ioctl;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_MULTICAST | IFF_SIMPLEX;
|
|
bcopy(sc->config->macaddress, sc->arpcom.ac_enaddr, sizeof(sc->config->macaddress));
|
|
|
|
/* Set up common ifmedia options */
|
|
ifmedia_init(&sc->ifmedia, 0, oltr_ifmedia_upd, oltr_ifmedia_sts);
|
|
|
|
ifmedia_add(&sc->ifmedia, IFM_TOKEN | IFM_AUTO, 0 , NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_TOKEN | IFM_TOK_UTP4, 0 , NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_TOKEN | IFM_TOK_UTP16, 0 , NULL);
|
|
|
|
ifmedia_set(&sc->ifmedia, IFM_TOKEN | IFM_AUTO);
|
|
|
|
if_attach(ifp);
|
|
iso88025_ifattach(ifp);
|
|
|
|
#if NBPFILTER > 0
|
|
bpfattach(ifp, DLT_IEEE802, sizeof(struct iso88025_header));
|
|
#endif
|
|
|
|
printf("oltr%d: Adapter modes - ", sc->unit);
|
|
if (sc->config->mode & TRLLD_MODE_16M) printf("TRLLD_MODE_16M ");
|
|
if (sc->config->mode & TRLLD_MODE_PHYSICAL) printf("TRLLD_MODE_PHYSICAL ");
|
|
if (sc->config->mode & TRLLD_MODE_FIXED_CFG) printf("TRLLD_MODE_FIXED_CFG ");
|
|
if (sc->config->mode & TRLLD_MODE_SHORT_SLOT) printf("TRLLD_MODE_SHORT_SLOT ");
|
|
if (sc->config->mode & TRLLD_MODE_CANNOT_DISABLE) printf("TRLLD_MODE_CANNOT_DISABLE ");
|
|
if (sc->config->mode & TRLLD_MODE_SHARE_INTERRUPT) printf("TRLLD_MODE_SHARE_INTERRUPT ");
|
|
if (sc->config->mode & TRLLD_MODE_MEMORY) printf("TRLLD_MODE_MEMORY ");
|
|
printf("\n");
|
|
|
|
return(1);
|
|
}
|
|
|
|
#if NPCI > 0
|
|
static void
|
|
oltr_pci_shutdown(howto, sc)
|
|
int howto;
|
|
void *sc;
|
|
{
|
|
printf("oltr: oltr_pci_shutdown called\n");
|
|
}
|
|
#endif /* NPCI */
|
|
|
|
static int
|
|
oltr_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct oltr_softc *sc = ifp->if_softc;
|
|
struct ifmedia *ifm = &sc->ifmedia;
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_TOKEN)
|
|
return(EINVAL);
|
|
|
|
switch(IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
TRlldSetSpeed(sc->TRlldAdapter, TRLLD_SPEED_AUTO);
|
|
break;
|
|
case IFM_TOK_UTP4:
|
|
TRlldSetSpeed(sc->TRlldAdapter, TRLLD_SPEED_4MBPS);
|
|
break;
|
|
case IFM_TOK_UTP16:
|
|
TRlldSetSpeed(sc->TRlldAdapter, TRLLD_SPEED_16MBPS);
|
|
break;
|
|
default:
|
|
return(EINVAL);
|
|
}
|
|
|
|
if (IFM_TYPE_OPTIONS(ifm->ifm_media) & IFM_TOK_ETR)
|
|
printf("oltr%d: ETR not implemented\n", sc->unit);
|
|
if (IFM_TYPE_OPTIONS(ifm->ifm_media) & IFM_TOK_SRCRT)
|
|
printf("oltr%d: source-routing not implemented\n", sc->unit);
|
|
if (IFM_TYPE_OPTIONS(ifm->ifm_media) & IFM_TOK_ALLR)
|
|
printf("oltr%d: all source routes not implemented\n", sc->unit);
|
|
if (IFM_TYPE_OPTIONS(ifm->ifm_media) & IFM_TOK_DTR) {
|
|
sc->AdapterMode |= TRLLD_MODE_FORCE_TXI;
|
|
sc->AdapterMode &= ~TRLLD_MODE_FORCE_TKP;
|
|
}
|
|
if (IFM_TYPE_OPTIONS(ifm->ifm_media) & IFM_TOK_CLASSIC) {
|
|
sc->AdapterMode |= TRLLD_MODE_FORCE_TKP;
|
|
sc->AdapterMode &= ~TRLLD_MODE_FORCE_TXI;
|
|
}
|
|
if (IFM_TYPE_OPTIONS(ifm->ifm_media) & IFM_TOK_AUTO)
|
|
sc->AdapterMode &= ~(TRLLD_MODE_FORCE_TXI | TRLLD_MODE_FORCE_TKP);
|
|
|
|
if (IFM_TYPE_OPTIONS(ifm->ifm_media) & ~ALL_OPTIONS)
|
|
return(EINVAL);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void
|
|
oltr_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct oltr_softc *sc = ifp->if_softc;
|
|
struct ifmedia *ifm = &sc->ifmedia;
|
|
|
|
ifmr->ifm_active = IFM_TYPE(ifm->ifm_media)|IFM_SUBTYPE(ifm->ifm_media)|IFM_TYPE_OPTIONS(ifm->ifm_media);
|
|
|
|
return;
|
|
}
|
|
|
|
void
|
|
oltr_timeout(token)
|
|
void *token;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[(int)token];
|
|
int unit = (int)token, s;
|
|
|
|
s = splimp();
|
|
|
|
printf("oltr%d: adapter timed out (%x)\n", unit, sc->hw_state);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
|
|
void
|
|
adapter_poll(token)
|
|
void *token;
|
|
{
|
|
int unit = (int)token, poll_timeout = 0, s;
|
|
struct oltr_softc *sc = &oltr_softc[unit];
|
|
#if 0
|
|
static int rx_buffers = 0, tx_buffers = 0, rc;
|
|
#endif
|
|
|
|
s = splimp();
|
|
|
|
/* Check to make sure we are not polling a dead card */
|
|
if ((sc->hw_state == HW_BAD) || (sc->hw_state == HW_UNKNOWN)) {
|
|
sc->poll_adapter = -1;
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/*printf("oltr%d: adapter poll.\n", unit);*/
|
|
|
|
/* If the adapter is to be polled again, then set up
|
|
* next timeout poll
|
|
*/
|
|
if (sc->poll_adapter) {
|
|
poll_timeout = TRlldPoll(sc->TRlldAdapter);
|
|
sc->poll_ch = timeout(adapter_poll, (void *)unit, (poll_timeout * hz)/1000);
|
|
}
|
|
#if 0
|
|
rc = TRlldReceiveFree(sc->TRlldAdapter);
|
|
if (rx_buffers != rc) {
|
|
printf("oltr%d: %d receive buffers available\n", sc->unit, rc);
|
|
rx_buffers = rc;
|
|
}
|
|
rc = TRlldTransmitFree(sc->TRlldAdapter);
|
|
if (tx_buffers != rc) {
|
|
printf("oltr%d: %d transmit buffers available\n", sc->unit, rc);
|
|
tx_buffers = rc;
|
|
}
|
|
#endif
|
|
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
oltr_init(sc)
|
|
struct oltr_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int i, rc;
|
|
|
|
/*printf("oltr%d: oltr_init\n", sc->unit);*/
|
|
|
|
/*
|
|
* Adapter should be freshly downloaded or previously closed before
|
|
* bringing it back on line.
|
|
*/
|
|
if ((sc->hw_state != HW_CLOSED) && (sc->hw_state != HW_LOADING) && (sc->hw_state != HW_CLOSING2)) {
|
|
printf("oltr%d: adapter not ready to be opened (%d).\n", sc->unit, sc->hw_state);
|
|
return;
|
|
}
|
|
|
|
/* Allocate and set up the DMA channel */
|
|
if (sc->config->dmalevel != TRLLD_DMA_PIO) {
|
|
rc = isa_dma_acquire(sc->config->dmalevel);
|
|
isa_dmacascade(sc->config->dmalevel);
|
|
}
|
|
|
|
/* Open the adapter */
|
|
sc->hw_state = HW_OPENING;
|
|
rc = TRlldOpen(sc->TRlldAdapter, sc->arpcom.ac_enaddr, sc->GroupAddress,
|
|
sc->FunctionalAddress, ifp->if_mtu + 52, sc->AdapterMode);
|
|
if (rc != TRLLD_OPEN_OK) {
|
|
printf("oltr%d: Adapter failed to open (rc = %x)\n", sc->unit, rc);
|
|
sc->hw_state = HW_FAILED;
|
|
} else {
|
|
/*printf("oltr%d: adapter opening...\n", sc->unit);*/
|
|
/*ifp->if_flags |= (IFF_UP | IFF_RUNNING);*/
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
}
|
|
sc->oltr_ch = timeout(oltr_timeout, (void *)sc->unit, 30*hz);
|
|
tsleep((void *)sc->unit, 1, "oltrop", 30*hz);
|
|
|
|
/* Give the receive buffers to the adapter */
|
|
for (i = 0; i < RX_LIST_SIZE; i++) {
|
|
rc = TRlldReceiveFragment(sc->TRlldAdapter,
|
|
(void *)sc->rx_buffer[sc->rx_next & RX_LIST_MASK].buf,
|
|
kvtop(sc->rx_buffer[sc->rx_next & RX_LIST_MASK].buf),
|
|
RX_BUFFER_LEN,
|
|
(void *)sc->rx_buffer[sc->rx_next & RX_LIST_MASK].index);
|
|
if (rc != TRLLD_RECEIVE_OK) {
|
|
printf("oltr%d: Adapter refused fragment %d (rc = %d).\n", sc->unit, i, rc);
|
|
break;
|
|
} else {
|
|
sc->rx_avail--;
|
|
}
|
|
sc->rx_next++;
|
|
}
|
|
sc->tx_frame.FragmentCount = 0;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
oltr_intr(unit)
|
|
int unit;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[unit];
|
|
int rc;
|
|
|
|
/*printf("oltr%d: oltr_intr\n", unit);*/ /* Too noisy */
|
|
rc= TRlldInterruptService(sc->TRlldAdapter);
|
|
if (rc == TRLLD_NO_INTERRUPT)
|
|
printf("oltr%d: interrupt not serviced.\n", unit);
|
|
}
|
|
|
|
#if NPCI > 0
|
|
static void
|
|
oltr_pci_intr(psc)
|
|
void *psc;
|
|
{
|
|
struct oltr_softc *sc = (struct oltr_softc *)psc;
|
|
int rc = 0;
|
|
|
|
/*printf("oltr%d: oltr_pci_intr\n", sc->unit);*/ /* Too noisy */
|
|
rc = TRlldInterruptService(sc->TRlldAdapter);
|
|
if (rc == TRLLD_NO_INTERRUPT)
|
|
printf("oltr%d: pci interrupt not serviced.\n", sc->unit);
|
|
}
|
|
#endif /* NPCI */
|
|
|
|
static void
|
|
oltr_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[ifp->if_unit];
|
|
struct mbuf *m0, *m;
|
|
int len, i, k, rc;
|
|
|
|
/*printf("oltr%d: oltr_start\n", sc->unit);*/
|
|
|
|
outloop:
|
|
|
|
i = (sc->tx_next & TX_LIST_MASK); /* Just to shorten thing up */
|
|
|
|
/* Check to see if we have enough room to transmit */
|
|
if (sc->tx_avail <= 0) {
|
|
/* No free buffers, hold off the upper layers */
|
|
/*printf("oltr%d: transmit queue full.\n", sc->unit);*/
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
|
|
if (sc->tx_frame.FragmentCount > 0) {
|
|
if (!(sc->config->mode & TRLLD_MODE_16M)) {
|
|
sc->tx_next++;
|
|
m0 = sc->tx_buffer[i].m;
|
|
goto restart;
|
|
}
|
|
}
|
|
|
|
IF_DEQUEUE(&ifp->if_snd, m);
|
|
if (m == 0) {
|
|
/*printf("oltr%d: oltr_start NULL packet dequeued.\n", sc->unit);*/
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
return;
|
|
}
|
|
|
|
/* Keep a pointer to the head of the packet */
|
|
m0 = m;
|
|
|
|
if (sc->config->mode & TRLLD_MODE_16M) { /* ISA Adapters - bounce buffers */
|
|
|
|
for (len = 0; m != 0; m = m->m_next) {
|
|
sc->tx_frame.TransmitFragment[0].VirtualAddress = sc->tx_buffer[i].buf;
|
|
sc->tx_frame.TransmitFragment[0].PhysicalAddress = kvtop(sc->tx_buffer[i].buf);
|
|
bcopy(mtod(m, caddr_t), sc->tx_buffer[i].buf + len, m->m_len);
|
|
len += m->m_len;
|
|
}
|
|
sc->tx_frame.FragmentCount = 1;
|
|
sc->tx_frame.TransmitFragment[0].count = len;
|
|
|
|
sc->tx_next++;
|
|
sc->tx_avail--;
|
|
|
|
} else { /* PCI Adapters w/DMA */
|
|
|
|
for (k = 0; m!= 0; m = m->m_next) {
|
|
sc->tx_frame.TransmitFragment[k].VirtualAddress = mtod(m, caddr_t);
|
|
sc->tx_frame.TransmitFragment[k].PhysicalAddress = kvtop(mtod(m, caddr_t));
|
|
sc->tx_frame.TransmitFragment[k].count = m->m_len;
|
|
k++;
|
|
sc->tx_avail--;
|
|
}
|
|
sc->tx_frame.FragmentCount = k;
|
|
sc->tx_buffer[i].count = k;
|
|
sc->tx_buffer[i].m = m0;
|
|
|
|
if (sc->tx_avail < 0) {
|
|
/*printf("oltr%d: transmit buffers exhausted.\n", sc->unit);*/
|
|
goto nobuffers;
|
|
}
|
|
sc->tx_next++;
|
|
}
|
|
|
|
restart:
|
|
rc = TRlldTransmitFrame(sc->TRlldAdapter, &sc->tx_frame, (void *)sc->tx_buffer[i].index);
|
|
sc->tx_frame.FragmentCount = 0;
|
|
|
|
if (rc != TRLLD_TRANSMIT_OK) {
|
|
printf("oltr%d: TRlldTransmitFrame returned (%x)\n", sc->unit, rc);
|
|
ifp->if_oerrors++;
|
|
goto bad;
|
|
}
|
|
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m0);
|
|
#endif
|
|
|
|
bad:
|
|
|
|
if (sc->config->mode & TRLLD_MODE_16M) {
|
|
m_freem(m0);
|
|
}
|
|
|
|
goto outloop;
|
|
|
|
nobuffers:
|
|
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
oltr_stop(sc)
|
|
struct oltr_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
printf("oltr%d: otlr_stop\n", sc->unit);
|
|
ifp->if_flags &= ~(IFF_UP | IFF_RUNNING | IFF_OACTIVE);
|
|
sc->hw_state = HW_CLOSING;
|
|
TRlldClose(sc->TRlldAdapter, 0);
|
|
sc->oltr_ch = timeout(oltr_timeout, (void *)sc->unit, 30*hz);
|
|
tsleep((void *)sc->unit, 1, "oltrcl", 30*hz);
|
|
}
|
|
|
|
static int
|
|
oltr_ioctl(ifp, cmd, data)
|
|
struct ifnet *ifp;
|
|
u_long cmd;
|
|
caddr_t data;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[ifp->if_unit];
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int error = 0, s;
|
|
|
|
/*printf("oltr%d: oltr_ioctl\n", ifp->if_unit);*/
|
|
|
|
s = splimp();
|
|
|
|
switch (cmd) {
|
|
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
error = iso88025_ioctl(ifp, cmd, data);
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
/*
|
|
* If the interface is marked up and stopped, then start it.
|
|
* If it is marked down and running, then stop it.
|
|
*/
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0)
|
|
oltr_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING) {
|
|
oltr_stop(sc);
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
}
|
|
}
|
|
|
|
if ((ifp->if_flags & IFF_PROMISC) != sc->PromiscMode) {
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
TRlldSetPromiscuousMode(sc->TRlldAdapter, OLTR_PROMISC_MODE);
|
|
else
|
|
TRlldSetPromiscuousMode(sc->TRlldAdapter, 0);
|
|
sc->PromiscMode = (ifp->if_flags & IFF_PROMISC);
|
|
}
|
|
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, cmd);
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
}
|
|
splx(s);
|
|
return(error);
|
|
}
|
|
|
|
/*
|
|
* PMW Callback functions ----------------------------------------------------
|
|
*/
|
|
|
|
static void
|
|
DriverSuspend(MicroSeconds)
|
|
unsigned short MicroSeconds;
|
|
{
|
|
DELAY(MicroSeconds);
|
|
}
|
|
|
|
|
|
static void
|
|
DriverStatus(DriverHandle, Status)
|
|
void *DriverHandle;
|
|
TRlldStatus_t *Status;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[(int)DriverHandle];
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
|
|
switch (Status->Type) {
|
|
case TRLLD_STS_ON_WIRE:
|
|
if (sc->hw_state == HW_OPENING) {
|
|
sc->hw_state = HW_OPEN;
|
|
ifp->if_flags |= (IFF_UP | IFF_RUNNING);
|
|
/*printf("oltr%d: Adapter inserted.\n", sc->unit);*/
|
|
untimeout(oltr_timeout, (void *)sc->unit, sc->oltr_ch);
|
|
wakeup_one((void *)sc->unit);
|
|
}
|
|
break;
|
|
case TRLLD_STS_SELFTEST_STATUS:
|
|
if (Status->Specification.SelftestStatus == TRLLD_ST_OK) {
|
|
printf("oltr%d: adapter status good. (close completed/self-test)\n", sc->unit);
|
|
if ((sc->hw_state == HW_LOADING) || (sc->hw_state == HW_CLOSING) || (sc->hw_state == HW_CLOSING2)) {
|
|
sc->hw_state = HW_CLOSED;
|
|
break;
|
|
}
|
|
} else {
|
|
printf("oltr%d: Self test failed: ", sc->unit);
|
|
switch (Status->Specification.SelftestStatus) {
|
|
case TRLLD_ST_ERROR + 0: printf("Initial Test Error\n"); break;
|
|
case TRLLD_ST_ERROR + 1: printf("Adapter Software Checksum Error\n"); break;
|
|
case TRLLD_ST_ERROR + 2: printf("Adapter RAM Error\n"); break;
|
|
case TRLLD_ST_ERROR + 4: printf("Instruction Test Error\n"); break;
|
|
case TRLLD_ST_ERROR + 5: printf("Protocol Handler/RI Hw Error\n"); break;
|
|
case TRLLD_ST_ERROR + 6: printf("System Interface Register Error\n"); break;
|
|
case TRLLD_ST_TIMEOUT: printf("Selftest did not complete\n"); break;
|
|
default: printf("Unknown error (%x)\n", Status->Specification.SelftestStatus);
|
|
}
|
|
}
|
|
break;
|
|
case TRLLD_STS_INIT_STATUS:
|
|
printf("oltr%d: Adapter initialization failed: ", sc->unit);
|
|
switch(Status->Specification.InitStatus) {
|
|
case TRLLD_INIT_ERROR + 0x01: printf("Invalid init block (LLD error)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x02: printf("Invalid options (LLD error)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x03: printf("Invalid rcv burst (LLD error)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x04: printf("Invalid xmt burst (LLD error)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x05: printf("Invalid DMA threshold (LLD error)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x06: printf("Invalid scb addr\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x07: printf("Invalid ssb addr\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x08: printf("DIO parity error (HW error)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x09: printf("DMA timeout (May be interrupt failing if PIO mode or PCI2)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x0A: printf("DMA parity error (HW error)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x0B: printf("DMA bus error (HW error)\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x0C: printf("DMA data error\n"); break;
|
|
case TRLLD_INIT_ERROR + 0x0D: printf("Adapter Check\n"); break;
|
|
case TRLLD_INIT_TIMEOUT: printf("Adapter initialization did not complete\n"); break;
|
|
case TRLLD_INIT_DMA_ERROR: printf("Adapter cannot access system memory\n"); break;
|
|
case TRLLD_INIT_INTR_ERROR: printf("Adapter cannot interrupt\n"); break;
|
|
case TRLLD_OPEN_TIMEOUT: printf("Adapter did not complete open within 30 seconds\n"); break;
|
|
case TRLLD_OPEN_ERROR + 0x01: printf("Invalid open options (LLD error)\n"); break;
|
|
case TRLLD_OPEN_ERROR + 0x04: printf("TxBuffer count error (LLD error)\n"); break;
|
|
case TRLLD_OPEN_ERROR + 0x10: printf("Buffer size error (LLD error)\n"); break;
|
|
case TRLLD_OPEN_ERROR + 0x20: printf("List size error (LLD error)\n"); break;
|
|
default:
|
|
if (Status->Specification.InitStatus & 0x700) {
|
|
switch (Status->Specification.InitStatus & 0x70F) {
|
|
case TRLLD_OPEN_REPEAT + 0x01: printf("Lobe media test - "); break;
|
|
case TRLLD_OPEN_REPEAT + 0x02: printf("Physical insertion - "); break;
|
|
case TRLLD_OPEN_REPEAT + 0x03: printf("Address verification - "); break;
|
|
case TRLLD_OPEN_REPEAT + 0x04: printf("Participation in ring poll - "); break;
|
|
case TRLLD_OPEN_REPEAT + 0x05: printf("Request initialization - "); break;
|
|
case TRLLD_OPEN_REPEAT + 0x09: printf("Request registration (TXI) - "); break;
|
|
case TRLLD_OPEN_REPEAT + 0x0A: printf("Lobe media test (TXI) - "); break;
|
|
default: printf("Unknown phase (%x) - ", Status->Specification.InitStatus & 0x00F);
|
|
}
|
|
switch (Status->Specification.InitStatus & 0x7F0) {
|
|
case TRLLD_OPEN_REPEAT + 0x10: printf("Function failure (No cable?)\n"); break;
|
|
case TRLLD_OPEN_REPEAT + 0x20: printf("Signal loss\n"); break;
|
|
case TRLLD_OPEN_REPEAT + 0x50: printf("Timeout\n"); break;
|
|
case TRLLD_OPEN_REPEAT + 0x60: printf("Ring failure (TKP) / Protocol error (TXI)\n"); break;
|
|
case TRLLD_OPEN_REPEAT + 0x70: printf("Ring beaconing\n"); break;
|
|
case TRLLD_OPEN_REPEAT + 0x80: printf("Duplicate node address (TKP) / Insert denied (TXI)\n"); break;
|
|
case TRLLD_OPEN_REPEAT + 0x90: printf("Request initialization (TKP)\n"); break;
|
|
case TRLLD_OPEN_REPEAT + 0xa0: printf("Remove received\n"); break;
|
|
case TRLLD_OPEN_REPEAT + 0xb0: printf("C-port address changed (TXI)\n"); break;
|
|
default: printf("Unknown type (%x)\n", Status->Specification.InitStatus & 0x0F0);
|
|
}
|
|
} else {
|
|
printf("Unknown error (%x)\n", Status->Specification.InitStatus);
|
|
}
|
|
}
|
|
break;
|
|
case TRLLD_STS_RING_STATUS:
|
|
if (Status->Specification.RingStatus != 0) {
|
|
printf("oltr%d: Ring status change: ", sc->unit);
|
|
if (Status->Specification.RingStatus & TRLLD_RS_HARD_ERROR) printf("[Hard error] ");
|
|
if (Status->Specification.RingStatus & TRLLD_RS_SOFT_ERROR) printf("[Soft error] ");
|
|
if (Status->Specification.RingStatus & TRLLD_RS_TRANSMIT_BEACON) printf("[Transmit beacon] ");
|
|
if (Status->Specification.RingStatus & TRLLD_RS_LOBE_WIRE_FAULT) printf("[Wire fault] ");
|
|
if (Status->Specification.RingStatus & TRLLD_RS_AUTO_REMOVAL_ERROR) printf("[Auto removal] ");
|
|
if (Status->Specification.RingStatus & TRLLD_RS_REMOVE_RECEIVED) printf("[Remove received] ");
|
|
if (Status->Specification.RingStatus & TRLLD_RS_COUNTER_OVERFLOW) printf("[Counter overflow] ");
|
|
if (Status->Specification.RingStatus & TRLLD_RS_SINGLE_STATION) printf("[Single station] ");
|
|
if (Status->Specification.RingStatus & TRLLD_RS_RING_RECOVERY) printf("[Ring recovery] ");
|
|
printf("\n");
|
|
}
|
|
break;
|
|
case TRLLD_STS_ADAPTER_CHECK:
|
|
printf("oltr%d: Adapter check (%x %x %x %x)\n", sc->unit, Status->Specification.AdapterCheck[0],
|
|
Status->Specification.AdapterCheck[1], Status->Specification.AdapterCheck[2],
|
|
Status->Specification.AdapterCheck[3]);
|
|
break;
|
|
case TRLLD_STS_PROMISCUOUS_STOPPED:
|
|
printf("oltr%d: Promiscuous mode stopped: ", sc->unit);
|
|
switch(Status->Specification.PromRemovedCause) {
|
|
case TRLLD_PROM_REMOVE_RECEIVED: printf("Remove received\n"); break;
|
|
case TRLLD_PROM_POLL_FAILURE: printf("Poll failure\n"); break;
|
|
default: printf("Unknown (%x)\n", Status->Specification.PromRemovedCause);
|
|
}
|
|
break;
|
|
case TRLLD_STS_LLD_ERROR:
|
|
printf("oltr%d: LLD error (%x %x %x %x) ", sc->unit, Status->Specification.InternalError[0],
|
|
Status->Specification.InternalError[1], Status->Specification.InternalError[2],
|
|
Status->Specification.InternalError[3]);
|
|
break;
|
|
case TRLLD_STS_ADAPTER_TIMEOUT:
|
|
printf("oltr%d: Adapter operation timed out: ", sc->unit);
|
|
switch(Status->Specification.AdapterTimeout) {
|
|
case TRLLD_COMMAND_TIMEOUT: printf("Command\n");
|
|
case TRLLD_TRANSMIT_TIMEOUT: printf("Transmit\n");
|
|
case TRLLD_INTERRUPT_TIMEOUT: printf("Interrupt\n");
|
|
default: printf("Unknown (%x)\n", Status->Specification.AdapterTimeout);
|
|
}
|
|
break;
|
|
default:
|
|
printf("oltr%d: Unknown status type (%x)\n", sc->unit, Status->Type);
|
|
|
|
}
|
|
if (Status->Closed) {
|
|
if (sc->hw_state > HW_BAD) {
|
|
sc->hw_state = HW_FAILED;
|
|
printf("oltr%d: closing adapter due to failure.\n", sc->unit);
|
|
oltr_stop(sc);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
DriverCloseCompleted(DriverHandle)
|
|
void *DriverHandle;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[(int)DriverHandle];
|
|
|
|
printf("oltr%d: DriverCloseCompleted\n", sc->unit);
|
|
|
|
untimeout(oltr_timeout, (void *)sc->unit, sc->oltr_ch);
|
|
wakeup_one((void *)sc->unit);
|
|
|
|
if ((sc->hw_state != HW_CLOSING) && (sc->hw_state != HW_CLOSING2) && (sc->hw_state != HW_CLOSED)) {
|
|
printf("oltr%d: adapter close complete called in wrong state (%d)\n", sc->unit, sc->hw_state);
|
|
return;
|
|
}
|
|
sc->hw_state = HW_CLOSING2;
|
|
if (sc->config->dmalevel != TRLLD_DMA_PIO)
|
|
isa_dma_release(sc->config->dmalevel);
|
|
|
|
}
|
|
|
|
static void
|
|
DriverStatistics(DriverHandle, Statistics)
|
|
void *DriverHandle;
|
|
TRlldStatistics_t *Statistics;
|
|
{
|
|
printf("oltr: DriverStatistics\n");
|
|
}
|
|
|
|
static void
|
|
DriverTransmitFrameCompleted(DriverHandle, FrameHandle, TransmitStatus)
|
|
void *DriverHandle;
|
|
void *FrameHandle;
|
|
int TransmitStatus;
|
|
{
|
|
int frame = (int)FrameHandle;
|
|
struct oltr_softc *sc = &oltr_softc[(int)DriverHandle];
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
|
|
/*printf("oltr%d: transmit complete frame %d\n", sc->unit, frame);*/
|
|
if (TransmitStatus == TRLLD_TRANSMIT_OK) {
|
|
ifp->if_opackets++;
|
|
} else {
|
|
printf("oltr%d: DriverTransmitFrameCompleted (frame %d status %x)\n", sc->unit, frame, TransmitStatus);
|
|
ifp->if_oerrors++;
|
|
}
|
|
|
|
if ((frame < 0) || (frame > TX_LIST_SIZE)) {
|
|
printf("oltr%d: bogus transmit frame. (%d)\n", sc->unit, frame);
|
|
return;
|
|
}
|
|
|
|
if (sc->config->mode & TRLLD_MODE_16M) {
|
|
sc->tx_avail++;
|
|
} else {
|
|
m_freem(sc->tx_buffer[frame].m);
|
|
sc->tx_avail += sc->tx_buffer[frame].count;
|
|
}
|
|
|
|
if ((ifp->if_flags & IFF_OACTIVE) && (sc->tx_avail > 0)) {
|
|
ifp->if_flags &= ~(IFF_OACTIVE);
|
|
oltr_start(ifp);
|
|
}
|
|
|
|
}
|
|
|
|
static void
|
|
DriverReceiveFrameCompleted(DriverHandle, ByteCount, FragmentCount, FragmentHandle, ReceiveStatus)
|
|
void *DriverHandle;
|
|
int ByteCount;
|
|
int FragmentCount;
|
|
void *FragmentHandle;
|
|
int ReceiveStatus;
|
|
{
|
|
struct oltr_softc *sc = &oltr_softc[(int)DriverHandle];
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
struct iso88025_header *th;
|
|
struct mbuf *m0, *m1, *m;
|
|
int j = (int)FragmentHandle, rc, frame_len = ByteCount, mac_hdr_len;
|
|
int mbuf_offset, mbuf_size, frag_offset, length;
|
|
char *frag = sc->rx_buffer[j].buf;
|
|
|
|
/*printf("oltr%d: ReceiveFrameCompleted (Size %d Count %d Start %d)\n", sc->unit, ByteCount, FragmentCount, j);*/
|
|
|
|
if (sc->hw_state >= HW_OPEN) { /* Hardware operating normally */
|
|
if (frag != sc->rx_buffer[sc->rx_next & RX_LIST_MASK].buf) {
|
|
printf("oltr%d: ring buffer pointer blown\n", sc->unit);
|
|
oltr_stop(sc);
|
|
return;
|
|
}
|
|
if (ReceiveStatus == TRLLD_RCV_OK) { /* Receive good frame */
|
|
MGETHDR(m0, M_DONTWAIT, MT_DATA);
|
|
mbuf_size = MHLEN;
|
|
if (m0 == NULL) {
|
|
ifp->if_ierrors++;
|
|
goto out;
|
|
}
|
|
if (ByteCount + 2 > MHLEN) {
|
|
MCLGET(m0, M_DONTWAIT);
|
|
mbuf_size = MCLBYTES;
|
|
if ((m0->m_flags & M_EXT) == 0) {
|
|
m_freem(m0);
|
|
ifp->if_ierrors++;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
m0->m_pkthdr.rcvif = &sc->arpcom.ac_if;
|
|
m0->m_pkthdr.len = ByteCount;
|
|
m0->m_len = 0;
|
|
m0->m_data += 2;
|
|
mbuf_size -=2;
|
|
th = mtod(m0, struct iso88025_header *);
|
|
m0->m_pkthdr.header = (void *)th;
|
|
|
|
m = m0; mbuf_offset = 0; frag_offset = 0;
|
|
while (frame_len > 0) {
|
|
length = MIN3(frame_len, (RX_BUFFER_LEN - frag_offset), (mbuf_size - mbuf_offset));
|
|
bcopy(frag + frag_offset, mtod(m, char *) + mbuf_offset, length);
|
|
m->m_len += length;
|
|
mbuf_offset += length;
|
|
frag_offset += length;
|
|
frame_len -= length;
|
|
if (frag_offset == RX_BUFFER_LEN) {
|
|
frag = sc->rx_buffer[++j].buf;
|
|
frag_offset = 0;
|
|
}
|
|
if ((mbuf_offset == mbuf_size) && (frame_len > 0)) {
|
|
MGET(m1, M_DONTWAIT, MT_DATA);
|
|
mbuf_size = MHLEN;
|
|
if (m1 == NULL) {
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
goto out;
|
|
}
|
|
if (frame_len > MHLEN) {
|
|
MCLGET(m1, M_DONTWAIT);
|
|
mbuf_size = MCLBYTES;
|
|
if ((m1->m_flags & M_EXT) == 0) {
|
|
m_freem(m0);
|
|
m_freem(m1);
|
|
ifp->if_ierrors++;
|
|
goto out;
|
|
}
|
|
}
|
|
m->m_next = m1;
|
|
m = m1;
|
|
mbuf_offset = 0;
|
|
m->m_len = 0;
|
|
}
|
|
}
|
|
ifp->if_ipackets++;
|
|
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m0);
|
|
#endif
|
|
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
if (bcmp(th->iso88025_dhost, etherbroadcastaddr, sizeof(th->iso88025_dhost)) != 0) {
|
|
if (((th->iso88025_dhost[0] & 0x7f) != sc->arpcom.ac_enaddr[0]) ||
|
|
(bcmp(th->iso88025_dhost + 1, sc->arpcom.ac_enaddr + 1, ISO88025_ADDR_LEN - 1))) {
|
|
m_freem(m0);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
mac_hdr_len = ISO88025_HDR_LEN;
|
|
if (th->iso88025_shost[0] & 0x80) /* Check for source routing info */
|
|
mac_hdr_len += (ntohs(th->rcf) & 0x1f00) >> 8;
|
|
|
|
m0->m_pkthdr.len -= mac_hdr_len;
|
|
m0->m_len -= mac_hdr_len;
|
|
m0->m_data += mac_hdr_len;
|
|
|
|
iso88025_input(&sc->arpcom.ac_if, th, m0);
|
|
|
|
} else {
|
|
if (ReceiveStatus != TRLLD_RCV_NO_DATA) {
|
|
printf("oltr%d: receive error. (ReceiveStatus=%d)\n", sc->unit, ReceiveStatus);
|
|
ifp->if_ierrors++;
|
|
}
|
|
}
|
|
out:
|
|
while (FragmentCount > 0) {
|
|
rc = TRlldReceiveFragment(sc->TRlldAdapter,
|
|
(void *)sc->rx_buffer[sc->rx_next & RX_LIST_MASK].buf,
|
|
kvtop(sc->rx_buffer[sc->rx_next & RX_LIST_MASK].buf),
|
|
RX_BUFFER_LEN,
|
|
(void *)sc->rx_buffer[sc->rx_next & RX_LIST_MASK].index);
|
|
if (rc == TRLLD_RECEIVE_OK) {
|
|
sc->rx_next++;
|
|
FragmentCount--;
|
|
} else {
|
|
printf("oltr%d: Adapter refused fragment (%d).\n", sc->unit, sc->rx_next - 1);
|
|
sc->rx_avail += FragmentCount;
|
|
break;
|
|
}
|
|
}
|
|
} else { /* Hardware being closed */
|
|
if (frag != sc->rx_buffer[sc->rx_next++ & RX_LIST_MASK].buf) {
|
|
printf("oltr%d: ring buffer pointer blown\n", sc->unit);
|
|
}
|
|
sc->rx_avail += FragmentCount;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* ---------------------------- PMW Glue -------------------------------
|
|
*/
|
|
|
|
#ifndef TRlldInlineIO
|
|
|
|
static void
|
|
DriverOutByte(IOAddress, value)
|
|
unsigned short IOAddress;
|
|
unsigned char value;
|
|
{
|
|
outb(IOAddress, value);
|
|
}
|
|
|
|
static void
|
|
DriverOutWord(IOAddress, value)
|
|
unsigned short IOAddress;
|
|
unsigned short value;
|
|
{
|
|
outw(IOAddress, value);
|
|
}
|
|
|
|
static void
|
|
DriverOutDword(IOAddress, value)
|
|
unsigned short IOAddress;
|
|
unsigned long value;
|
|
{
|
|
outl(IOAddress, value);
|
|
}
|
|
|
|
static void
|
|
DriverRepOutByte(IOAddress, DataPointer, ByteCount)
|
|
unsigned short IOAddress;
|
|
unsigned char *DataPointer;
|
|
int ByteCount;
|
|
{
|
|
outsb(IOAddress, (void *)DataPointer, ByteCount);
|
|
}
|
|
|
|
static void
|
|
DriverRepOutWord(IOAddress, DataPointer, WordCount)
|
|
unsigned short IOAddress;
|
|
unsigned short *DataPointer;
|
|
int WordCount;
|
|
{
|
|
outsw(IOAddress, (void *)DataPointer, WordCount);
|
|
}
|
|
|
|
static void
|
|
DriverRepOutDword(IOAddress, DataPointer, DWordCount)
|
|
unsigned short IOAddress;
|
|
unsigned long *DataPointer;
|
|
int DWordCount;
|
|
{
|
|
outsl(IOAddress, (void *)DataPointer, DWordCount);
|
|
}
|
|
|
|
static unsigned char
|
|
DriverInByte(IOAddress)
|
|
unsigned short IOAddress;
|
|
{
|
|
return(inb(IOAddress));
|
|
}
|
|
|
|
static unsigned short
|
|
DriverInWord(IOAddress)
|
|
unsigned short IOAddress;
|
|
{
|
|
return(inw(IOAddress));
|
|
}
|
|
|
|
static unsigned long
|
|
DriverInDword(IOAddress)
|
|
unsigned short IOAddress;
|
|
{
|
|
return(inl(IOAddress));
|
|
}
|
|
|
|
static void
|
|
DriverRepInByte(IOAddress, DataPointer, ByteCount)
|
|
unsigned short IOAddress;
|
|
unsigned char *DataPointer;
|
|
int ByteCount;
|
|
{
|
|
insb(IOAddress, (void *)DataPointer, ByteCount);
|
|
}
|
|
|
|
static void
|
|
DriverRepInWord(IOAddress, DataPointer, WordCount)
|
|
unsigned short IOAddress;
|
|
unsigned short *DataPointer;
|
|
int WordCount;
|
|
{
|
|
insw(IOAddress, (void *)DataPointer, WordCount);
|
|
}
|
|
static void
|
|
DriverRepInDword(IOAddress, DataPointer, DWordCount)
|
|
unsigned short IOAddress;
|
|
unsigned long *DataPointer;
|
|
int DWordCount;
|
|
{
|
|
insl(IOAddress, (void *)DataPointer, DWordCount);
|
|
}
|
|
#endif /* TRlldInlineIO */
|
|
|
|
#endif /* NOLTR */
|